Standoblue - Application Guide
Автокөліктер мен көлік құралдары
In this video we show the essential aspects of applying Standoblue on the full side of a car. The focus on several key points like how the 1.5 coat process should look like, the importance of spray gun distance, how to control overlaps and how the basecoat should look whilst it’s still wet.
Follow these simple steps and you will improve your results.
For more videos subscribe to our channel or visit bit.ly/2wScn8F
Пікірлер: 14
Excellent
Bon travail
Hello, what size nozzle do you suggest to spray standoblue with Iwata LS400, 1.2 ET or 1.3 ET, or other type of nozzle. Thank you for your reply
@StandoxOnline
2 жыл бұрын
Hi, thanks for the question and our interest. If the LS 400 is your gun of choice then I would suggest to use the 1.2 ET. This is based on use in standard EU conditions and not where humidity levekls are low. You may find that the WS 400 with an OBS set iup to be a better solution, again this is climate dependant.
Hey serious question here, why do you go outside of your repair area on your first coat? And what do you do if your color doesn’t match 100% ??
@StandoxOnline
2 жыл бұрын
Hi, thanks for contacting us. Not sure we understand your question fully? The application method used in this video demonstrates how to apply the basecoat to the side of a vehicle with the key point being not to apply your effect coat beyond your first coat so as to avoid creating too much over/underspray on the remaining area.
1.2 what? looks like 1.2 RP, and the HVLP dosn't come in '1.2' only WSB. It also could mean RP 1.2 W. Can you please confirm the exact tip, getting new guns together with Standoblue mixing bank next week. (Finally).. My Rep. Sales said he would recommend the 1.2 W, but never sprayed blue with it.. Thanks in advance :-)
@StandoxOnline
5 жыл бұрын
If you like to use SATA RP, we suggest either SATA 5000 RP 1.2 or new SATA 5500X RP 1.2O
@InsaneDire
5 жыл бұрын
@@StandoxOnline thank you
How many grams ready for use did you need for this job?
@StandoxOnline
5 жыл бұрын
Honestly its too long ago to remember, but it took 3 mins to paint and the gun we used consumes approx. 170g/min = 0.5 litre RFU. Hope that answers your question.
Is this base-coat a modified acryl-polymer?
@StandoxOnline
3 жыл бұрын
This waterborne basecoat is a combination of resins selected to provide optimum results under different application conditions.
@Quant-Beat
3 жыл бұрын
@@StandoxOnline Yes, but it is a form of acryl-polymer? I read a lot about the unpolar products, solvents, acryl, polyurethane and epoxy where I get most answers from literature. The car water soluble base coats are still a mystery for me. I am impressed by how you solved the clouding, where the suspension itself seems to arrange a clouding free result. It's magical!