Standard Resin vs. ABS-Like Resin: A few experiments to see how they compare.
Тәжірибелік нұсқаулар және стиль
Buy your own Yousu iForm ABS-like resin right here: amzn.to/3iKgig1
Check out the Voxelab Proxima here: amzn.to/3iLqSUa
3D print files
Wood Elf Warrior by RGauthier: www.thingiverse.com/thing:454...
Thin guitar pick: www.thingiverse.com/thing:331548
Thick guitar pick: www.thingiverse.com/thing:253985
Instagram: / thomaslightle
Facebook: / redbarnwoodworking
Twitter: / tnlightle
Пікірлер: 51
We need a test of "abs like resin vs abs filament"
Never knew you could print even guitar picks, crazy!
Thanks a lot! Considering buying some ABS-like resin right now, and I appreciate the preview of what I should expect from it!
Great video, now I know what to use for miniatures.
good work man , You helped me a lot
Thanks a lot for the info!
Great video.... thanks!
Thanks a lot for this test !
@SouthpawWorkshop
Жыл бұрын
I’m glad you found it helpful!
great vid, thanks.
Thank you, realy good Video!
ty this was helpful
Great video, just subscribed!!! It's very hard to find an actual comparison of real world scenarios and not just hearsay and people reading from the bottles. With that said, I was wondering if you would ever consider doing another one of these videos mixing in Siraya Tenacious? Ive heard some pretty killer things about this practice but the pricepoint scares me
@SouthpawWorkshop
2 жыл бұрын
Great suggestion. I'm currently filming a test with water washable resin. I may check out the Siraya Tech stuff in the future.
I work in science, and I think your tests are well done. Nice video
@SouthpawWorkshop
2 жыл бұрын
Thanks a lot!
hello I use Anycubic Tough and have never used ABS-LiKE Anycubic. Can anyone tell me what the difference between them ? They look very similar.
I have 10kg "not any cubic" standard resin 😉 for around 400CAD. I got some 20kg of siraya tech abs like resin for same price too, but obviously twice the quantity. Bulk printing electronic cases for my product atm.
Thanks man =) have you tried elegoo abs like resin or SIraya Tech?
@SouthpawWorkshop
Жыл бұрын
No, I hear the Siraya Tenacious resin is really strong, but I haven’t had a chance to test it
The one thing I'm thinking after watching this is that your test may have been skewed away from the standard resin. Because that resin is black, the UV light wouldn't penetrate very far when you cure it while the lighter color ABS like resin is a lighter color so the curing light would get further into the model. I'm not sure how much of a difference this would make, but if you do resin tests again, having both types in a light color might be a better comparison. When you do your tension tests, it looks like they all fail where they were clamped into the vise. Modeling a loop into each end would allow you to eliminate them breaking at the stress point where they were clamped. A flex test where you apply a side load till it breaks would also have been a nice addition and fairly easy to set up. (drill a hole in a 2X4 and insert your rod into it then pull sideways on the top till it breaks)
@BioClone
6 ай бұрын
And less cured resin would be more fragile or more elastic?
thanks for the video. quick question, do you find the ABS like resin smell to be more offensive than the standard resin?
@SouthpawWorkshop
Жыл бұрын
I couldn’t really detect a difference between the two.
@kspec2001
Жыл бұрын
@@SouthpawWorkshop thanks for the prompt response!
On such a small part, you shouldn't need to chisel it out from the build plate. I recommend backing off on the exposure time of your first layers.
Just curious, any difference in smell between the two? Any difference in printer settings?
@SouthpawWorkshop
2 жыл бұрын
Nope and nope. Similar smell and I didn’t change my settings from the standard resin settings.
@Trevor3DrPrints
2 жыл бұрын
The ABS like does smell much much more
The covered brand is AnyCubic
That’s anycubic resin he’s putting it up against. Good resin. Maybe better than what I usually use.
ABS reacts with acetone, will the abs-like resin react to acetone?
@SouthpawWorkshop
6 ай бұрын
No. They call it “ABS-like” in terms of toughness and heat resistance. Great question!
Does the box for the ABS like resin say "Life is like a box of chocolates. . . "
Wow,it's interesting.😆
That bottle is very similar to my Anycubic Standard Resin , why cover the name..?
@bangbangyoureaboolean1324
2 жыл бұрын
I'm 99% sure it is Anycubic.
@derrekingledue3138
Жыл бұрын
Lol, you can see the Anycubic logo in another shot directly after he shows it covered
What slicer do you use for voxelab
@SouthpawWorkshop
Жыл бұрын
Chitubox and Lychee both work well with Voxelab
i cant tell if it was just the angle on camera but did the abs-like have better looking pock marks?
@SouthpawWorkshop
2 жыл бұрын
It is possible, but I can’t guarantee I post-processed both prints identically, so it may not be a fair comparison
grreT video, i like
awesome i think my standard resin is to brittle.. so next bottle will be a ABS like.
Buena comparación.
@SouthpawWorkshop
2 жыл бұрын
Gracias!
….. flesh tone?
Oh, your damn charm, why can you play the guitar so great
@SouthpawWorkshop
2 жыл бұрын
Lol. All four notes you heard!
ngl its really weird watching someone use a hammer to tap the prints off the plate when its very easy to scoop em right off.
Thanks for your real world testing, but using a pick on a bass... 😭