Staged header pipe versus straight pipe / Predator 212
Staged header pipe versus straight pipe / Predator 212
Ran a staged header pipe and a straight pipe on the Predator 212 on the Coleman bike to see if there is any difference in performance between the two.
Coleman cc100x Predator 212 playlist - • Coleman cc100x minibik...
Music Vlog Music No Copyright _ Just smile - LiQWYD-9COGHx4XKUc
Song: LiQWYD - Just Smile
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution 3.0 Unported
Video Link: • LiQWYD - Just Smile (V...
__________________________________________________________________________
Parts used - staged header pipe
www.ebay.com/itm/193709332828
Instagram-doubledown555black66
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos.
Black66 does not take any responsibility for injuries or equipment failure created by doing so.
ALL BLACK66 CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Пікірлер: 82
Another fun and educational video, it’s like you’re the mad scientist of minibikes. Hope you can keep them coming, ride safe out there. Thanks.
@Black66
2 жыл бұрын
Thanks ! I have more mad scientist stuff coming.
@miguelpagansr6128
2 жыл бұрын
@@Black66 I appreciate you for what you do my brother. And I remember a video you posted recently on sprockets combos, there was one that caught my attention a 18 tooth sprocket on the clutch and a 60 tooth on the rear sprocket. Would that combo work on a stock Honda gx160 set up? My plan is to leave it all stock including the governor for reliability purposes I like my race bikes but I just want to cruise now a days I had enough of speed, I’ve had a back injury and both legs broken because of it. Now I just want to go slow and enjoy the scenery.
@Black66
2 жыл бұрын
@@miguelpagansr6128Thanks! I hear ya. That combo will work. It won't be super quick because it's a higher gear ratio. If you just want to cruise. a lower tooth count clutch might be better. It would have more low end.
You the best minibike content producer on YT. Thx man. Keep up the great work. Im following your 224cc build. Gonna steal a few of your mods
@Black66
2 жыл бұрын
Thanks! I'm glad you like the content. I have some more stuff I'm gonna do to the 224 in upcoming videos.
That’s a quick little bike! Thanks for the quality content!
@Black66
2 жыл бұрын
Thanks!
Mufflers, silencer, ad back compression that helps with torque so it depends on the application but that always the case lol , great information thank you for your time an content
Another great test video !!
@Black66
2 жыл бұрын
Thank you!
You should have tested the staged pipe vs. straight- both no muffler . This test just proves mufflers are restrictive . Thanks for the vids btw 🤘
@Black66
2 жыл бұрын
Thanks! I have a video coming out on that topic with the Mega Moto 80
Cool stuff!
I was scrolling through the wasteland of KZread today wondering why you hadn't put something out. An hour later, here you are.
@Black66
2 жыл бұрын
I always have to show up with something😃
I wonder what this man sock drawer looks like 😂😂
@tashatorrid
2 жыл бұрын
😄
Awesome channel
@Black66
2 жыл бұрын
Thanks!
Need to get you some sun f street tires, my man. It will make your street cruise way may enjoyable!
that stage pipe better make more cuz thats the one i have
take off speed, cruising speed, and top speed i feel like should all be considered. maybe it affects the 2 stroke bicycles more then 4 stroke 212's but i would think the one with the muffler would have slower take off speed but more top speed.
I need to know what your carb settings are on that if it has the 22mm mikuni like the a/f ratio set screw, i was just wondering if i screwed it in all the way but not super tight just bavk to where it stops how manys twists back out till i get that right setting like this mini bike in the video
If I upgrade my carb to a makuni and straight pipe it will I have to switch the rod out ?
What pipe is the staged pipe, I can’t find it on eBay, is it the one omb sells?
Do you happen to have a part number for the stepped header pipe? Love your videos. Keep it up!!
@Black66
2 жыл бұрын
Thanks! appreciate that! Yes here is the link for the staged pipe www.ebay.com/itm/193709332828
@andrewkuhtz
2 жыл бұрын
Thanks!
@cravenmoorehead5636
Жыл бұрын
Check out Robertson tourque tubes. They are the best.
@brdllc
Жыл бұрын
@@cravenmoorehead5636just looked him up. Wish I would’ve seen this earlier haha. Just ordered a different regular pipe for my ct200uex. Oh well I’ll still try a torque tube. I couldn’t find a staged pipe to fit my bike, until now
I have a predator 224 with torque converter on a Manco go kart. I can't get it past 21. What should I do?
@Black66
Жыл бұрын
Maybe remove the governor
What are your engine modifications? Your carb and your filter and all the other stuff you might have
@Black66
10 ай бұрын
Check out the cc100x playlist for all the engine combos and parts swaps on this bike. kzread.info/dash/bejne/q2ekzpmEmba6nbw.html
@andrewbrown3123
10 ай бұрын
@@Black66 thank you
Does this predator 212 pipe fit in the normal engine of this same Coleman mini bike ??
@420edu3
Ай бұрын
Yes
@420edu3
Ай бұрын
Yes
Just a ClassicaL BeaSt!!!!!
@Black66
2 жыл бұрын
Yes, it is a beast!
@Spacecruizer203
2 жыл бұрын
@@Black66 thats the one with the blue weld near where u screw it in at right i have the same one for my ducar brand new just waiting
@Black66
2 жыл бұрын
@@Spacecruizer203 Sweet! Nice sound
@Spacecruizer203
2 жыл бұрын
@@Black66 so the motovox frame i have i just found out is a very wanted frame some dude just offered me 8hundo i turned it down dumb because with 800 i could get the bigger mega moto frame from gopowersports for 600 and then put the ducar on it but do i really want a bigger bike ? what would u of done
@Black66
2 жыл бұрын
@@Spacecruizer203 I would keep the small one and make a hot rod bike . I like the quickness of the little bike .
What app are you using to time these runs
@Black66
Жыл бұрын
I use digiHUD along with the camera GPS for top speed and a Dragy performance meter for 0 to 30
I like the sound of a staged pipe way better, had more of a low end growl, my stand trumpet is just soo high pitch I feel like
@alexanderpapii4866
10 ай бұрын
Where did you buy your trumpet?
I have a Azusa mini bike could you tell me what tooth size is good for trying to go 60mph
@Black66
2 жыл бұрын
I went 60 with the five inch tires with both the 60 tooth and the 72 rear sprocket . I used a 17 and an 18 tooth clutch
@pbedrook
2 жыл бұрын
@@Black66 which sprocket faster? 60 or 72. Im currently running 72t n go like 60 would i be faster with 60t
@Black66
2 жыл бұрын
@@pbedrook Generally that's what would happen. A 60 tooth will give you more top end but slow you down a little taking off. As long as the engine has enough torque to pull the gear . Rider weight and tire height play a role in it too.
@pbedrook
2 жыл бұрын
@@Black66 Aite i might try it and see how it trun out . Wat would be some else i could do for more torque
@mgwashing
Жыл бұрын
@@pbedrook yes
is this AZ or NV?
@Black66
2 жыл бұрын
AZ
What do u have in the engine
@Black66
5 ай бұрын
Check out the playlist. I have had many engine and part combos on this bike. Over 350 videos on the channel so far! 👍 Check them out! kzread.info/dash/bejne/iXp5uNGcj8TUaLw.html
Would you ever sell your go kart? If so how much?
@Black66
2 жыл бұрын
Ya, I might sell it at some point. I'm not sure how much. I guess it would depend on what engine I have on it when I sell it.
But why do they do these tests with upgrade carburetors I want to stay out the box stock regular carburetor with Max torque
@Black66
2 жыл бұрын
The reason I use this carburetor is that it will support future modifications better. Nothing wrong with the stock carb.
@Black66
2 жыл бұрын
Check out my other videos on the CC200U . I’m using the stock carb .
It made me think, why were you shocked that the pipe was hot, because mines gets hot real quick
@Black66
2 жыл бұрын
I was kind of joking when I said that.That was the point, I knew it was hot...
@Trains_n_stuff08
2 жыл бұрын
@@Black66 oh ok😅
is it proper to run your engine with clutch facing outwards or ghetto
@Black66
Жыл бұрын
Yes, you can run then either way
@OldNoNameJoe
Жыл бұрын
@@Black66 shouldve never answered that dumb ass question
Why do you just leave the valve breather hole to the open air where dirt could get in you engine 🙄
@Black66
Ай бұрын
Check out the playlist on the channel to see what happened !
on that note can u say BeasT 10x fast lol
@Black66
2 жыл бұрын
Yes!
@Black66
2 жыл бұрын
Lol
@Spacecruizer203
2 жыл бұрын
@@Black66 lol thats a ripper
Don't Burn Yourself 😳😳
@Black66
2 жыл бұрын
LOL that thing was hot for some reason!
Will it burn the valves to have an open exhaust without a muffler?