Hello and congratulations for the explanation. I have a problem with the ignition of a DITECH SR 50, after a long period of inactivity I find the fuel pump blocked. I release but it does not start anyway, I decide to measure the pressure in series with the delivery pipe and with the key inserted at 2.5 bar while in start 4.5 bar, but equally it does not start. I ask your opinion.

Good vid, I repair/renew fuelpumps for SR-s Ditech Aprilia, Scarabeo, Peugeot. For me that pump looked quite solid, it dropped the pressure while the engine was reved up for the second time, but it was not a major drop, so not 100% sure that the pump has a fault.

@veronicascooterrental103

4 жыл бұрын

Are you still repairing fuelpumps? Veronicascooters@gmail.com

fuel pressure regulator,fuel pump or air leak somewhere.Mine drops a little but not a huge drop as urs.prime 2.5 bar is good,when the engine idle its should be around 7-8 or higher bar.

I wish my Ditech 2009 was running so nice! ;-) I changes air and fuel injectors and that resolved the issue after found crashed o-ring under the air injector. It runs nicely for 3 days and now would not even start. Checked o-rings and injector and all is good. I suspect fuel pump now failed. I have now a big collection of failed pumps. Aprilia made worst quality bikes. Aprilia dealers closed shop in my area. Time to move to other brand.

wie nennt man dieses gerät mit dem man den druck messen kann weiß das einer ?

I really need your help. I have an aprilia SR50 02 Di - Tech. One day when i was driving i just died. And now it only starts with start gas. It doesnt get any fuel. Is it the fuelpump of what. Please contact me :(

@habanero0073

10 жыл бұрын

-ьдвлб!б!с!

oboy

kompressionsmesser