Thanks for educating me

Great info and explanation! Thank you for sharing! So excited to explore the world of nitrous, and wouldn't dare try without Induction Solutions/Steve Johnson and his crew! Unparalleled in support and service.

Great video and real world tech thanks

Great video 📹

Great video

I have an induction solution kit on my car. I went from 6.75 1/8 mile on motor to 6.11 1/8 mile on a 150 shot. I have the Holey Moley kit.

@rivercitymusclecars

4 ай бұрын

Good plate system. Yeah. My car picked up a 1/2 second on a 150. I was very satisfied with IS

Keep the vids coming!

Atomizing the fuel, nitrous cuts fuel up, cools it to densor charge, my take 👍

What? No softened chambers in the heads? No better exhaust valves? Overall, great info bud!! I've been building, tuning, spraying and refilling nitrous for damn near 30 years. SJ is a great source as is Nitrous Supply (Mike Thermos). Most of the common companies offer "flowing and custom tuning" as well but an independent opinion is always good. Keep the vids comin!!

@rivercitymusclecars

Жыл бұрын

Yea sir I tried to mention as much as possible in a 15 min video. So I really was trying to hit the high notes. But yes softening chambers and iconel valves really help the motor live.

How much timing would you pull out of a 200hp kit? Roughly lol

@rivercitymusclecars

4 ай бұрын

On my old set up I pulled 7 degrees with 200 hp. Just depends on fuel. Set up. Plug heat range. Ect…….

I had fast lane flow the direct port I got a 30 page book with all kinds of different fuel ratios

@rivercitymusclecars

11 ай бұрын

Good money spent

What's the setup for your car love the nitrous video!

@rivercitymusclecars

Жыл бұрын

It was a 434 sb. Bullet nitrous cam. Afr 220 renegade heads. Ross forged pistons. Eagle crank. Crower rods. Wilson intake. AED 950 carb. Msd grid. NX max 4 controller. Nitrous outlet stinger 3 plate BP ans flowed by induction solutions. Rossler terminator 2 glide. Neal chance converter.

He was so busy installing nitrous he didn’t even have time to finish the drywall in the shop. Lol

Charlie Murphy 😂

@rivercitymusclecars

11 ай бұрын

RIP! 😂. He was a legend

If it starts popping and missing just change to a bigger nitrous jet

I would be interested to know where to send my info to get tune ups for nitrous.

@rivercitymusclecars

Жыл бұрын

Steve Johnson @ induction solutions

@dustinmintz9788

Жыл бұрын

@@rivercitymusclecars thanks!

do youthink the nitrous can tell which fuel it is burning..great steve johnson commercial..

@rivercitymusclecars

Жыл бұрын

Steve Johnson and induction solutions are a great company with tons/decades of knowledge. He helped me greatly in my program. Nitrous Dont care about what fuel is burning but the engine will if it goes lean for some reason lack of octane or to much timing will burn it up. I posted a video about my experience with that so make sure your careful

The biggest thing you never mentioned is timing

@rivercitymusclecars

Жыл бұрын

I have always followed Steve Johnson timing recommendations

@infamousnova

Жыл бұрын

@@rivercitymusclecars what were his recommendations for you

@rivercitymusclecars

Жыл бұрын

@@infamousnova each tune up, set up, everything will be different. All depends on combo. Fuel. Ect……. His tune up will be custom to your set up

@infamousnova

Жыл бұрын

@@rivercitymusclecars yea I know, just wanted a idea. So what's your timing

@rivercitymusclecars

Жыл бұрын

@@infamousnova I was at 24 degrees 7psi fuel pressure in the stand alone with c23

Um

Great video