These look great! I’ll definitely be picking some of these up for those cramped projects that need diffused looking light. Great video! Thanks!

thank you for this. i have built a 3-tier barrister-style bookcase with the intent of installing stained glass in the fronts and sides of the upper two tiers (the bottom contains four drawers ). we've been experimenting with how to illuminate the stained glass from the interior of the bookcase using lcd strips -- playing with diffuser materials, from layers of packing foam, to sanded/etched plexiglass, etc. thinking to try COB strips. interesting.

Currently not much around on IG so always great to see what you are up to when you upload one of these videos!

Killer tip. There are tons of areas in cosplay where tight packaging means that you just can't fit enough material to diffuse a spotty light.

Just on point under 5 minutes! Great!

Perfect timing 😂 I had this problem with my cosplay I’m working on.

I neeeeeed those rgb cob strips. So cool!

I always love seeing notifications on new videos from you 😘

@leolion1990

2 жыл бұрын

Definitely need this for my edc costume!

Awesome video! Can't wait to see more cosplays from you in the future!

I don't think I'll ever need a chip on board LED strip but it's interesting to learn about nontheless!

Amazing, buddy!

Nice looks truly great for PC RGB etc. How are these as lighting? I use Lepro LED Strip Lights, 16.4ft 12V Dimmable Strip Lights, 6000K Daylight White, 300 Units 2835SMD from amazon in my livingroom for lighting along the ceiling/wall. I am looking to get alunimum v shape channels but worry about the spot issues. I wonder if these strips could be used in place and give off as much lighting with a channel?

How did you curve them for that flat halo @2:03? Is it hard bend them into a flat 2D curvature?

I have questions. Hopefully, you have answers. I'm attempting to make my own custom emblems for a car project. I want to light them. It's a very shallow and broken up area. Are there any lights, tips, or tricks you can suggest?

. . . . . . this is a GODSEND!!

Bless you brother

Biceps looking good man, also thanks for sharing this. I’m always doing LED projects, I even had to buy a PWM expander for my Teensy 4.1 because I had so many LEDs on my motorcycle.

YOU ARE A MAGICIAN.

Great content 👍

That's so cool🤯

What are the odds, I found this stuff, literally days after I watched your last video about diffusing. Only problem I had, was they still benefit only as sections, not really individual LEDs (which of course is a given). Also, like you said, the price hurts, and when I was looking, availability and diversity of parts, were hit or miss

Another great video. I'm learning a lot from them and I'm using that knowledge in my own projects. I don't know much about AliExpress and have never used them before... Is it a generally reliable way to buy electronics and have you found delays have been an issue or there's been extra taxes and things?

@Zibartas

2 жыл бұрын

It's kinda like amazon, but individual sellers ship items - Ali is just the middleman handling returns/claims etc. Most of my small electronics/components come from there though - and regarding taxes, I think there's a new agreement with EU where they (Ali) charge you VAT at checkout and there's no further taxes after that, but look into it. :)

I wanted to create the doom crucible with the light strip

I also found these a few weeks ago but didn´t know there are addressable ones. But the price... :D May I ask how you did the shiny gold finish on Mercys head piece?

@sintoxic

2 жыл бұрын

nevermind, I just saw you made it from real brass :D

Hello there. I recently have gotten interested into using cob led for developing a costume. I am looking to power it with double A's to power 12v led cob leds. It is a 4 pin cob led. Where could I find some compatible connectors, wires and RGB controllers? There are so many but I don't know if any would actually work since they seem to be for regular led light strips.

What will be the wattage and amps of a 12volt (120led/m) Smd 5050 rgb strip light of 10mtr length?

Can these be turned into sequential led rgb ?

Hi man. Love your videos. Really informative. Your video about powering leds with batteries inspires me. . I want to power a 6 watt led panel with a 3.7v 10000mah powerbank. How can i do it. Is it a good idea ? Or i just use AAA. RECHARGEABLE BATTRIES.

You're a life saver, I need these for my Tinkerer costume 😁 have you found any that are narrow that could potentially be used for thin lines on gloves?

@faesommers

2 жыл бұрын

one way to get a thinner line would be covering up part of the line?

@missnikin

2 жыл бұрын

have you looked into EL wire?

1:28 bro what...your cosplay gears the best ive ever seen. well done. been in product development for 7 year.. you got the juice.

Hey dude, Love this video, I had a question how would I make an entire shoulder armor that lights up?? What would u recommend?

@Zibartas

11 ай бұрын

Really depends on the design, really - generally edge lighting translucent surfaces is the way to go but ymmv

Is this much more power hungry than a normal led strip? Wondering how it can be powered. I’m just getting into all this and love your videos!

@oliverer3

Жыл бұрын

Very late reply but someone might still find it useful, with the addressable ones you're looking at about 25-30W per meter. A normal 60 led/m strip uses about 18w/m in comparison so they do use more power. Do however note that this is at peak brightness which you probably won't run them at most of the time.

@salimnidalzatout5160

Жыл бұрын

@@oliverer3 hello Sir , plz i have qw's if you can answer me 🙏

@oliverer3

Жыл бұрын

@@salimnidalzatout5160 sure!

The cosplay is legit!!!

Can you suggest me something with high density leds/meter please? I want 7m rgb led strip with 90 leds/meter (diffuse acrylic) but i cant find anything

You are awesome bro

The gaps are so small!! 😮

Where could I buy these?

Anyone know where I can find the Addressable one in the U.S?

Hey man, I wonder if you could make some Ben 10 cosplay or props, maybe making a Omnitrix prop that lights up and rotates or something, I just thought it would be so cool to see your insane skills on it As always, great content

Looks like led dots everywhere

Price and electrical data pls

I need something that will be the same for a rgb for my ps5 I'm trying to make very little space

Bruh I was wondering wut to get for my drawing desk lighting & this I think vid has has wut I lookin for But still I'm clueless & want more info Send yt vid links or name names to easily reach the idea im looking for

I don't say often that something is the future, but this is the future

yeah that was news to me

ZillaLove 💙

5mm cob led strip has no edging coper contacts and has 512 leds per meter

Really Dope Videos🤩🤩🤩

I had gotten into the habit of buying these after seeing your halo video a year or so ago.

3:50 I feel the smell of stink buds

New to the channel, has this guy done a pennywise cosplay because he would smash it

Reminds me a lot of El wire

@Zibartas

2 жыл бұрын

Yeah kinda, just not fragile, dim or requiring a noisy 100+ volt inverter :D

Русский акцент слышится на каждом слоге друг))

Please help me, need to design an outdoor market stall to advertise my book brand "Who Will We See?" & ultra mobile so can travel with the whole thing by foot

U cute🤩🥰😛💘😝

hey! I have a super small project I want to do and I need some help. do you think you could give me some advice?

oh come on, grow up man! :D like a girl with all these weird atributes

I want to use a cob led strip in my Kyloe ren helmet,what would you recommend and what the best battery supply to use to get the best lighting? Thank you

@Zibartas

8 ай бұрын

Maybe a rechargeable 9V battery/pack of batteries and a 12V COB strip? You could also use a USB-C PD power bank, and a 9V/12V trigger board :) Depends on your skill, time and budget :)