The 450 is a great candidate it's not too heavy And as a tall guy I love the seat on the 450 it's so comfortable can't stand the concave seats where you're pushed up into the gas tank.

@CJMudCo

Жыл бұрын

Agreed!!

Appreciate the great video and the cleanest install video I have watched for the Polaris. Thanks

@CJMudCo

2 жыл бұрын

Yes! Thanks for watching!!

Love the vids but you gotta find new music lmao

@CJMudCo

3 жыл бұрын

Thanks! Lol!

@milesobrien8192

3 жыл бұрын

Ik

Great video !!!

@CJMudCo

3 жыл бұрын

Thanks for watching!!

Nice work.

@CJMudCo

2 жыл бұрын

Thanks!

thx so much i cant wait to do this with mine

@CJMudCo

3 жыл бұрын

Great! Thanks for watching!

Doing a build on a 05' Sportsman 800. Just bought all the snorkel plumbing, black, with Ryobi green are the colors... thinking to myself as I am watching this what a pain in the ass painting the 45's green is going to be just as you whip out your blue bushings......genius! I will post a pic when done. Great vid! Thanks....

@CJMudCo

3 жыл бұрын

Awesome!!! Thanks for watching!! Looking forward to a pic!

@warlock-designs-customizations

3 жыл бұрын

So I did a little twist on your idea. I rounded the side showing on your install down with a bench grinder. There was raised PVC lettering on the round end (Opposite of your install end) that I did not want to show, so I used an orbital sander and sanded those off. Sanded all pieces with 120 grit sandpaper. This is my paint process for plastic in case anyone is interested. 1.Rustoleum adhesion promotor-251572 ....2 coats about 5 minutes apart 2. Rustoleum 2X Key Lime (We call it Ryobi Green around here) 327871 3 coats about 5 minutes apart. 3. Rustoleum Acrylic Enamel Gloss Clear 271913... 2 coats about 5minutes apart. 4. Spraymaxx Clear Coat SK (2 part Epoxy-spray cans) .... 2 coats ( MUST wear a respirator and not necessary for these parts....I was working on some other parts and the cans only have about a 24-hour shelf life, so use it or lose it scenario...) Really pleased with how it turned out and big thanks to C&J Mud for the idea! www.amazon.com/photos/shared/xuHLZ31ZS9OaKC6eAeeRvA.lOzMJA5gNQDUP5ZkvPKIJB

@CJMudCo

3 жыл бұрын

Yes!! Looks awesome man!! Love the idea!! Glad to help!! Thats what its all about, giving people some ideas to run with their own creativity!! @@warlock-designs-customizations

Can't wait for some new content i have watched all the videos on the 450....using ur videos to guide me to build mine thx

@CJMudCo

3 жыл бұрын

Awesome!! Great to hear! Hope it's helping, thanks!!

Nice to see someone doing work on something other than top of the line models. These people spend $30k+ to trail ride when you’re top speed is 30mph. Only time something like that is beneficial if a straight away. I have a 2020 1000s RZR. I really like the videos done on the 900s. Keep up the great work!!

@CJMudCo

2 жыл бұрын

Yes! Thanks for watching!!

@bigjay6743

Жыл бұрын

The right clutch kit and a tune you can make a 450 zing along pretty good Like you said how fast do you really need to go in the trails 30 tops.

Love the bids

@CJMudCo

3 жыл бұрын

Thanks!

@JoeSmith-tf2jo

3 жыл бұрын

Great content

Jesus Christ I thought it was my 4 wheeler that made that damn ticking noise 😂😂

i been putting mine off, but seems ez enough.. great Video..

@CJMudCo

3 жыл бұрын

Great! Thanks for watching!!

Love the vids one day u gonna be out here with million of subscribers I find this videos helpful ! Also can u leave a link to all the stuff u got

@CJMudCo

3 жыл бұрын

Awesome! Thanks! Glad it’s helpful!! I’ll work on putting some links together. Did you mean specifically for the snorkel install or the whole build?

Did you run any lines or just the intake and belt

Did you have to waterproof anything else? Ive heard that the belt housing leaks water thru the back idk how true that may be

Do I have to vent anything on the carb with vinal tubing or anything or leave it

I have an atv like yours polaris 450 could you tell me where you bought the kit to lift it and the kit for the radiator and the snorkel kit I would like to know where you bought everything and your tires?

I have everything just waiting on the pool hose to get delivered lol

@CJMudCo

3 жыл бұрын

Nice!

Nice video simple and explained well,..but what are those 4 silver square pieces that are mounted on top of storage box called?

@CJMudCo

2 жыл бұрын

They are conduit hubs

And when you do cement, you need to clean the male and female connector not just the male, and when you put it in it should go on amd twist a ¼-½ a turn into place to "lock" the glue. Or else its not bonded correctly, will it work in your application? Probably but its definitely not a solid bond as intended

My only question is with the hose reduction in size how does airflow for belt go? Any extra heat build up with restricted airflow?

@CJMudCo

3 жыл бұрын

From what I’ve seen so far it’s been fine, now I’ve also installed a clutch kit so that may help too.

How long did this build take you? I’m wanting to get mine built by this weekend but I have to plan around it.

@CJMudCo

3 жыл бұрын

It takes a while I’d allow at least a couple days just for snorkels.

Hey man just wondering what size tires your running and did u need a gear reduction?

@CJMudCo

3 жыл бұрын

28” mega mayhems, no gear reduction

What size hole saw did you use? I’m installing mine this week. Thanks for the video!

@CJMudCo

3 жыл бұрын

Thanks for watching!! I believe it was 1 1/2”

@jongipson8979

2 жыл бұрын

@@CJMudCo one more question.. the link for the elbow that has the insert on one end and slip on on the other end says it’s 1 1/2. Will that work or will I need to find a 2” one. I know the insert side needs to be 1 1/2” but what about the other side? I think both sides of that one is 1 1/2”. Thanks again for your help.

@CJMudCo

2 жыл бұрын

That one works because it’s 1 1/2 inside diameter so the outside fits into the adapters nicely. It’s tough because you may also be able to find a 2” that works.

Did you have to seal the back of the belt box?

Those clips that u used to keep the front rack shut where did u get it and what size bolt was that

@CJMudCo

3 жыл бұрын

Was an m6 or m8 bolt got it a a local hardware store along with j-nuts or auto parts store.

Hey can u plz tell me what tires are those and where u got them I’m looking for tires fore my Polaris 570 and the ones u have on look aggressive but not to aggressive you know what I mean but any way I’d rly appreciate it if u tell me where u got those tires

@CJMudCo

3 жыл бұрын

They are Mega Mayhems 28''x11x12 on the rear 28x9x12 front. Came from Rocky Mountain ATV

Did you end up using 1 1/2 inch hose or 2 inch?

Can u leave a link to every thing u got for it

Did you do any other water sealing other than just the snorkels

@CJMudCo

3 жыл бұрын

No just snorkels and the belt box

Where did you order the intake adapter plate? I need to do this on my 450.

@CJMudCo

Жыл бұрын

Its looking like they stopped selling them separately

I love the idea of snorkels they just make it so much harder to do maintenance after you install them. I've already ruined too many 4 wheelers. Now as rule of thumb if it's over the tires it to deep Now my only problem is my tires are too big lol.

Where else can I get the adaptor plate? The link you put is no good

What tires and rims do you run?

How did you get it to idle underwater mine shuts off as soon as I let off the gas

My home depot only sells the pool hose by the foot, did you need all 30' ? I have to order everything for curb side pickup, due to covid.

@CJMudCo

3 жыл бұрын

Not sure the exact amount, but I know I used most of it.

@slater552

3 жыл бұрын

@@CJMudCo Thx

U think your whole belt box and air box can go under water and be fine ? With silicone

@CJMudCo

3 жыл бұрын

Yup! I’ve done it with no issues so far!

vent lines? not sure if i missed it but what about breathers and stuff like that? or did i miss some thing?

@CJMudCo

3 жыл бұрын

Didn’t end up doing them in this video, the stock vent lines run up to the headlight so they’re pretty high up. I ended up just putting bellows in the ends of the vent hoses in a different video. So ya didn’t miss anything lol

@jongipson8979

2 жыл бұрын

@@CJMudCo will you share the link to the bellows you used? Which video shows you installing them? I need to do mine.

Hey so I’m doing mine now using your video as a guide. My kit says I should have four vent lines under the pod but I only have two. Any suggestions/ really got me stumped. Love all your videos btw

@caseyevans4971

2 жыл бұрын

Also I know about venting front and rear differential. What else should I be venting

@CJMudCo

2 жыл бұрын

Awesome! Thanks for watching!! I only ever saw the 2 lines too all I ended up doing was putting bellows on the ends of those 2 lines. I believe the trans and rear diff are the same line, In my brake job video is when I put them on.

@CJMudCo

2 жыл бұрын

@@caseyevans4971 usually the fuel tank, trans and coolant reservoir. Like I said I only ended up doing the 2 so far so good!

How hard is the fan to take out and clean behind it on the 450

@CJMudCo

2 жыл бұрын

It can be a pain especially if you have a winch

What can I do if I don’t have the warrior plate?

On 6:28 what is the measurement u cut the pvc pipe

Is it 2” conduit hubs?

I can’t find the air box adapter plate anywhere online. Can you please help me find it

@CJMudCo

Жыл бұрын

Unfortunately I think SYA stopped selling them individually now.

I want to figure out a way to snorkel my polaris without cutting into the storage box. Ive been thinking maybe through the foot area thing.

@CJMudCo

3 жыл бұрын

Not a bad idea, may be tough but let me know how ya do.

@allottpatterson255

3 жыл бұрын

@@CJMudCo will do. And love the vids, you do good at making the parts and install vids

@CJMudCo

3 жыл бұрын

@@allottpatterson255 Thanks!!

U sure u link the hose right ? I can’t fit the hose on the warrior plate it’s hard

@CJMudCo

3 жыл бұрын

Yeah, the hose goes on hard but you should be able to get it.

Did you di aletric grease your electrical connections

@CJMudCo

2 жыл бұрын

I did after the video lol

Do they sell the adapter plate still? I can't seem to find it anywhere.

@CJMudCo

Жыл бұрын

Hmm I'm not sure I looked everywhere now I can't find it, looks almost like they stopped selling it separately.

Becareful bud I have a 2018 450 and been trail ridding hi center of gravity I have arched a arms and ol girl bucked me off today trail ridding

@CJMudCo

3 жыл бұрын

ohh man! Good to know, thanks!

You forgot around each screw hole too! Good video tho

I can’t find the warrior plate anywhere

Where did you purchase the 1-1-2 dual riser. I cant find it anywhere

@henryf7141

Жыл бұрын

What did you end up doing to make it work?

Where did you get the inch and a half to 2 inch elbows I have looked everywhere and can’t find them

@CJMudCo

3 жыл бұрын

I got mine from a local hardware store, in the description I linked one that should be similar.

@eddieknight7429

3 жыл бұрын

@@CJMudCo sorry I didn’t see the link?

@CJMudCo

3 жыл бұрын

No problem

What about the vent lines

I have a 800 but this is such an awesome idea thanks but will definitely be stealing your set up

@CJMudCo

3 жыл бұрын

Awesome!! Thanks for watching!!

@stevesilva1986

3 жыл бұрын

@@CJMudCo of course brother I have a KZread channel also gunsthrills&chills but I do more pew pew stuff but definitely ganna start doing more off road 4wheeler stuff

@CJMudCo

3 жыл бұрын

Cool! I’ll be sure to check it out!

what tipe of tube is that

I can’t find the 2in to 1.5 in hose adapter please help ?

@dylansoto70

2 жыл бұрын

Yooo if you find it lmk, I can’t find it either

@CJMudCo

2 жыл бұрын

ooo that's a tough one! If the link isn't in my description, and you can't find one at a Home Depot or Lowes, best bet would be a local hardware store. But double check my description I thought I put it in there.

What do I call the plate adapter in the site

@CJMudCo

Жыл бұрын

it looks like they no longer sell them separately

That’s a 2 inch by 10 pbc pipe what measurement was each one u cut

@anthonycina3858

3 жыл бұрын

On 6:18 what’s the measurement for each snorkal

@CJMudCo

3 жыл бұрын

10” lengths

Can u do a video how to run the vent lines please

@CJMudCo

3 жыл бұрын

Yeah been busy so it may be a bit but I’ll try to put one together, thanks for watching!

@anthonycina3858

3 жыл бұрын

@@CJMudCo thank u so much lol I've been trying to find a video but I haven't found one and u the only guy that I know In youtube that will probably do it I also did my snorkals already same as yours lol I think I'ma order the rad relocate this weekend

@AJ11b02

3 жыл бұрын

@@anthonycina3858 Also curious about the vent lines.

did you have to run any vent lines? thank you

@DiebeatuzFH

3 жыл бұрын

They are all zip tied under the top headlight from factory(the high beam light). It dosent look like he did but if you want to use the full length of the snorkel it would be a good idea.

@CJMudCo

3 жыл бұрын

Dylan 336 is right, I didn’t because of where they are, it would be a good idea to run them up the snorkel.

@rileymay3556

3 жыл бұрын

@@CJMudCo 👍 thanks

@rileymay3556

3 жыл бұрын

@@DiebeatuzFH 👍 thanks

@rileymay3556

3 жыл бұрын

@@DiebeatuzFH one quick question since you seem to know a bit any idea the number of vent lines? I see one that hangs down near my battery I just don’t wanna miss any

Can u write exactly I would need for sportsman 570

@CJMudCo

2 жыл бұрын

The list in the description would be the same.

How did this hold up?

@CJMudCo

2 жыл бұрын

So far so good! We ride on some rocky trails and they really have held up well!

Do you have to add vent lines?

@CJMudCo

3 жыл бұрын

I didn’t but you can, they run up under the headlight from the factory

@240sxslideordie

3 жыл бұрын

@@CJMudCo what are the upsides to vent lines I have a 450 just like yours just had the radiator relocation and snorkels installed but it didn’t come with vent lines wanna make sure I can run it without them

@CJMudCo

3 жыл бұрын

@@240sxslideordie so the machine already has vent lines for the front and rear differentials, (they're just 1/4''hoses so they can breathe)stock they run up to the headlight. Some people extend the hoses or put bellows on to keep water out. Not totally necessary unless your going headlight deep a lot.

@sir_tate1329

22 күн бұрын

@@240sxslideordiedid you ever run them or run into issues ..? Water going down your vent line could trash your diff

How much did this cost?

@CJMudCo

3 жыл бұрын

About $160 after tax and shipping

Where do I find the plate at by any chance

@CJMudCo

Жыл бұрын

I was able to get mine from SYA(snorkel your atv) but I heard they don’t offer them anymore.

@masontompkins6616

Жыл бұрын

Yeah bc I can’t find it anywhere

I almost had to turn it off because of the guitar rift. 🤣

I wish he would’ve Gave us a full build, I have the same four wheeler and I have no idea how to snorkel it.

@nestorvelazquez100

3 жыл бұрын

Same here

@CJMudCo

3 жыл бұрын

What more did ya wanna see?

@dailyshepherd8014

3 жыл бұрын

@@CJMudCo everything, like the hole entire snorkel setup

@XxTWMLxX

3 жыл бұрын

Did you watch the same video I did? Covers the stacks to the hose to the couplers to the intake/exhaust hookup what is left other then he didn't mention vent lines for the difs

@vinnysquadexpeditions1722

2 жыл бұрын

@@XxTWMLxXwhat about vent lines and vent line locations

need to run vent lines

@CJMudCo

3 жыл бұрын

Thought about that after I did the video lol

@ryanwalker4152

3 жыл бұрын

@@CJMudCo do you think you could make a video on running the vent lines because I’m having trouble

@CJMudCo

3 жыл бұрын

@@ryanwalker4152 I'll try to put something together. I think the lines under the headlight just need to be extended. But I'll look into it.

Conduit hub adapter u forgot to link that I’m snorkeling my 570 same as yours lol I just want everything u got

@CJMudCo

3 жыл бұрын

Yeah some of the pieces I couldn’t find online, but there just 2” pvc to threaded male adapters. I’ll try to find a link

@anthonycina3858

3 жыл бұрын

@@CJMudCo okay thank u

@CJMudCo

3 жыл бұрын

Your friend has shared a link to a Home Depot product they think you would be interested in seeing. 2 in. PVC DWV Hub x MIPT Male Adapter Fitting www.homedepot.com/p/100348351

@CJMudCo

3 жыл бұрын

@@anthonycina3858 let me know if it worked then I can add that in the description, thanks

@anthonycina3858

3 жыл бұрын

@@CJMudCo yes thank u lol

U forgot link something

You wouldnt have had to grind those barbs off if you would have just heated that pool hole up a little with a heat gun.

@CJMudCo

2 жыл бұрын

Thats a good idea!

Smoke it..... hahah

@CJMudCo

3 жыл бұрын

Lol!

Is there anyway I can contact u like on Instagram or something I need help lol

@CJMudCo

3 жыл бұрын

I’m starting to work on Instagram, but it’s not quite there yet, lol

What about the vent lines

@CJMudCo

2 жыл бұрын

Ended up just using bellows on them, did it in a different video

@CMDRTeklow82

Жыл бұрын

Had one more question. The rubber grommet on the bottom of the air box. Have you had any problems with that I was considering on modding it somehow