Spindle Replacement from S Blade to Star Blade Cub Cadet ZT1 MTD Riding Lawn Mower
Тәжірибелік нұсқаулар және стиль
In this video, I show you how easy it is to change from the proprietary "S" lawnmower blade type to the much more common "star" pattern lawnmower blade by changing out the spindles on your zero-turn lawnmower. The cost was not much more expensive than a new set of OEM Cub Cadet blades and the new spindles allow for easy maintenance with the zirk grease fittings. Total install time 1 hour. Note: The spindles I used on my Cub Cadet ZT1 50 were not a cross referenced part number as one did not exist that had the "star" pattern. Make sure and measure your spindles before ordering.
Products Used:
Heavy Duty Professional Pistol Grip Grease Gun 6000 PSI: amzn.to/3Vi2wo5
Grease Gun Coupler, Quick Release: amzn.to/4aDqwXl
Lithium EP Grease Tube: amzn.to/3X2jbO0
8TEN Spindle High Lift Blade Kit 50 inch Cut Deck for Cub Cadet MTD: amzn.to/3yD3h2t
Craftsman Lift - 500lb Lifting Capacity, Fits Most Residential & Zero Turn: amzn.to/4eagsYW
The above links will take you to Amazon.com. As an Amazon Associate I earn a small percentage from qualifying purchases.
Email: TDMikeFan@gmail.com
Пікірлер: 31
I have the same mower, Thank you for posting this. I've spent the last day and a half trying to research what parts I need to do the same thing. I wish I had found this video sooner
@ThatDadMike
5 күн бұрын
Glad you found the video! The spindles are working great, in fact I just mowed tonight. Let me know how the install goes if you end up changing yours out or if I can help in any way!
I think a lot of people were waiting for MTD to do something nice for their customer... This s series spendle was a hell of a thing to do to us as we're going into the worst depression in history... I like the green colored lawn mower blades. It makes me start thinking John Deere.
@ThatDadMike
Ай бұрын
Here is one that appears to be for your model. Double check it to be sure and make sure to grease the zerk fittings before you mow if you end up buying them: amzn.to/3KBqFjj
8ten has really good quality parts and I’ve used them for 3 years in shop, even the belts are holding up great 👍
@ThatDadMike
Ай бұрын
I agree, they are working great! The representative I spoke with before I ordered was also very helpful.
If you disassemble those spindles, you may find the bearings are still sealed on both sides, and you can't pump grease into a sealed bearing.
@ThatDadMike
Ай бұрын
That's certainly possible. They seemed to take the grease well (one overflowed slightly where the shaft exits the spindle) and are cutting beautifully.
@philliphall5198
Ай бұрын
Yes so I take them apart and remove the inside covers 😊😊😊 Fast and easy to do ❤
@danielsmit11
17 күн бұрын
Actually there's a video proving you can just have to pump enough grease in instead of stopping at 4 pumps or so.
Good info
@ThatDadMike
2 күн бұрын
Thank you!
Just order a set for my zt1 54. I had a spindle break. I almost bought just that one new spindle for the same price has the whole kit to replace them all. Glad I found your video. And yeah the s shape center hole sucks. One of the biggest cons in my opinion. Glad I’ll be changing them to the 6 point.
@ThatDadMike
27 күн бұрын
Thanks for taking the time to comment! Glad the video helped, I think you will really like them and no more proprietary blades!
@garyprofitt5698
21 күн бұрын
Which ones you order and from where? I need some for my zt1 54"
@ThatDadMike
21 күн бұрын
These look like the ones you need. Double check the part number of your spindles and mower in the description to be sure. amzn.to/3VZCipy
Now if you can figure out how to put a normal size battery in.instead of the smaller gel coat battery we would be in business thank you for making this video I looked at home Depot and my home Depot doesn't have the s shap blades in stock Suprise Suprise
Think the spindles would be the same for my Troy-Bilt Super Bronco 50? They have the S Shaped spindles. Second season with it and I just bought a pair of mulching blades for it. The star pattern spindles would be so much better.
@ThatDadMike
25 күн бұрын
It looks like it probably will! Double check the models listed on the page here: amzn.to/4cOGf7c The good thing is the Amazon listing states free returns in the event you need it. If it were me, I would give it a shot and then double check the dimensions on the new spindle with the one from your mower before you install. Let me know how it works out if you order them!
I have the same zt1 mower. I was able to source Rotary brand blades for it From Ebay for $11.42 each. So didn't seem worth it to change spindles. Also, the spindle bearings fail because the outside seals fail. They get contaminated and destroyed. Filling that void between the bearings doesn't add much life if any to the bearings imho. The bearings are easy and inexpensive to replace compared to a spindle assembly.
@ThatDadMike
10 күн бұрын
Did those blades have the star pattern?
@basshnter1997
10 күн бұрын
@@ThatDadMike no, s shaped pattern. Rotary 17224. I agree the star pattern is in most cases less expensive and much easier to find replacement blades.
I have a 2022 Cub cadet XL1 46 inch deck riding lawn mower... I'd like to know what star spindles I would use... I would have never bought this lawn mower if I would have known about this...😮
@ThatDadMike
Ай бұрын
I was surprised as well, frustrated to be honest. The blades also only lasted 30 hours - I have never had a set last that short of time. With a new set over $70, I had to figure out something else. To get started, look at your spindle and get the part number off of it. Email that to 8ten and see if they have a star version replacement. If not, get the part number that they give you and then you can begin to look at dimensions to find a star that fits. It's a bit of work but once you are done, you will really like it. I have cut my lawn 3 times since installing and could not be happier. Here is one that appears to be for your model. Double check it to be sure and make sure to grease the zerk fittings before you mow if you end up buying them: amzn.to/3KBqFjj
I have a Craftsman Z5800 54in zero turn with the terrible S shaped spindles but I can’t figure out with spindles to get with Star pattern to replace them 😢 Can someone help me please
@ThatDadMike
Ай бұрын
See if you can find a website that sells the s shaped OEM replacement for your mower with the dimensions. Once you have the dimensions, you should be able to find the star pattern spindle that will replace it on the 8ten site (link in my video description). That's the process that I used and the 8ten spindles and blades have worked excellent. Partstree.com says that the spindle on your mower is an 619-04183B which is now a 719-07293-M. Double check the part number on your spindle and the dimensions as the cross reference may not work since you are changing from the s to the star. Here is one that appears to be used on a lot of 54" mowers - check and see if the dimensions are the same as what you have installed before ordering as it may not work: amzn.to/3XMMcxy
@MotoD124
Ай бұрын
@@ThatDadMike you sir are a hero! After finding out the new spindle assembly housing part number all the sudden there’s a million aftermarket spindle assemblies that fit my deck! My lawn says thank you 🫡
@ThatDadMike
Ай бұрын
Excellent news! When you get the new spindles, double check all of the dimensions and pulley size before you install them so you can return if needed - I had a terrible time trying to cross reference with the MTD/Cub Cadet part number on mine and ended up just ordering what I thought looked like a match based on dimensions and I got lucky. Let me know how they work once you get them all changed out!
I’m not happy with the change MTD has made, seems there pretty much trying to screw us over all the time Praying Murray will go back in business 😊❤
@ThatDadMike
Ай бұрын
It is certainly unfortunate, I do wish they would go back to the way they used to be.
@danielsmit11
17 күн бұрын
Murray is back in business. Saw a couple new Murray's in home Depot this year. Probably still owned by mtd though, nearly all box store mowers are made by mtd even John Deere box store mowers were up to a couple years ago.