Put the corner with the buttons in first!!!!! And yes I would buy one if it didn’t have the Apple Pencil slot as I don’t use one. 👍

@olewiseone1079

2 ай бұрын

I use the Apple Pencil and the pencil slot is the only problem I have with the Ultra Hybrid Pro case. I’m probably going to try and cut it off the case altogether.

Very good videos thanks! Thinking on the IPad Pro 11 M4!

Ive been buying spigen since the iphone 5s for my gear. Rocked the ultra hybrid for my 2018 ipad pro. Got the 2024 and couldnt wait for the case to be available so ended up going with ESR's Shift case. The idea of adding a small divot instead of a whole pocket that spigen is currently doing is what held me to staying with ESR this time around. The other reason is the magnetic aspect of the ESR shift case where i can basically just detach the pad from the stand portion and have a much more minimal option instead of carrying the whole thing.

Free and friendly advice, put the corners with buttons, first, and then all the corners, one by one adjacent corner

Awesome video, I was struggling to choose which case to buy. I bought a clear ESR Case, but thanks to this I really liked the white one. I think I'm going to give it a try , that one seems really useful to be able to remove part of the cover.

@JaysTech158

2 ай бұрын

Glad I could help!

Thanks for this video ❤

@JaysTech158

2 ай бұрын

Welcome! 😊

The only problem with the Hybrid model is the super thin magnetic latch. For my fingers, it’s a bit difficult to grab it to open. Also, over time I wonder how scratched up that clear plastic covering will be. Other than those two concerns, it’s a neat case.

Great overview Jay. Appreciate you showing all of these in detail 👍

@JaysTech158

2 ай бұрын

Thanks Kevin! Glad you liked it 😊

Is there a case recommended for IPad with nano texture?

On the Urban Fit, does the cover magnetize to the back when you fold it back?

Try JETech case and it is a actual brand

Hi Jay, nice review. I plan to buy the air skin pro case for my iPad Pro 11 M4. Can you tell me what’s the weight of the case without the front cover please (so just the bumper)

@JaysTech158

Ай бұрын

The bumper case for this without the front cover is 157g. Hope this helps 😊

@Mr.AlDodo

Ай бұрын

Thank you so much Jay !

@JaysTech158

Ай бұрын

You’re welcome!

Hey mate, deciding between these, which among the three have the strongest stability when on drawing mode or when drawing with the pencil? Most of the ones I’ve tried have flimsy cover and putting pressure on the screen when drawing, they feel flimsy and unstable. Hoping to hear from you soon.

@JaysTech158

2 ай бұрын

Hi, all of the cases shown are very stable when using in drawing mode. You shouldn’t have any worries about that with any of these cases. Hope this helps! 😊

Are all these cases compatible with both screen protection options from Spigen?

@JaysTech158

2 ай бұрын

I don’t know because I haven’t tried any Spigen screen protectors but I can tell you they are compatible with the ESR Armorite screen protector I have. Hope this helps!

I have a Zagg case on my new iPad BUT I hate the rubber that makes the cut out for speakers sloppy...are the Spigen cases made of "hard" plastic all over or is the cutouts sloppy as well...????

@JaysTech158

2 ай бұрын

These spigen case are all made with tpu sides on the top, bottom and sides which are protective and tight fitting but a little bit flexible at the same time. I wouldn’t describe the cutouts as ‘sloppy’ at all. Hope this helps!

@epona6

2 ай бұрын

@@JaysTech158 just ordered the Rugged one. 👍

@JaysTech158

2 ай бұрын

Great choice 👍🏼

What is the difference between the Ultra Hybrid Pro Case and the AirSkin Pro Case?

@JaysTech158

2 ай бұрын

The front cover can detach on the AirSkin Pro whereas on the Ultra Hybrid it does not. Other than that, not a whole lot of difference.

Paaji how does spigen cases compare to the ESR case I'm from india and I wanna buy the ESR case Pls Tell❤️

@JaysTech158

23 күн бұрын

Paaji if you have the 13” iPad Pro I would recommend the ESR slim trifold case if you are just using at home. If you take your iPad out of the house then I would recommend on the Spigen cases as they are more protective. Hope this helps 😊

@johncena5162

23 күн бұрын

​@@JaysTech158I have the 11inch version and I mostly use at home so I will go will ESR Thank you . Lots of Love from India❤️❤️❤️❤️

@JaysTech158

23 күн бұрын

Just to let you know that on the 11” version of the ESR slim trifold case currently the sleep/wake function does not work. If this does not bother you, you can still go ahead and buy it but just thought I’d let you know. Thanks for the love bro ❤️❤️❤️❤️

@johncena5162

23 күн бұрын

@@JaysTech158 ok bro

What about heat dissipation from behind ?

I've watched about 5 reviews on the spigen cases now... and no one shows what I want to know... Does the lid fold back flat and fix magnetically so it doesn't flap around if I'm sketching on my lap per se.

@Sean4realz

24 күн бұрын

I’m wondering the same thing, because the esr case does exactly that!

This case is compatible with iPad Pro m2 ???

@JaysTech158

23 күн бұрын

I haven’t tried it but I don’t believe so

Casetify iPhone cases are best for protection, ESR shift for IPad. The rest don’t match up

I look for cases SPECIFICALLY that do NOT have a Apple Pencil cutout. Too bad those are getting harder and harder to find from the "major" case makers.

If you had to suggest one to someone, which one would you .

@JaysTech158

2 ай бұрын

Everyone will have their own preference but for me it would be the Spigen Ultra Hybrid Pro

I don’t if to get a case for mine yet I should really as kids are always on Roblox lol

@JaysTech158

2 ай бұрын

Lol