Always taking the time to explain it !!!!

@Brian_the_repair_guy

Жыл бұрын

I hope this is something that helps you

Great video!!! Thank you!!!!

@Brian_the_repair_guy

Жыл бұрын

Hope it was helpful

Great explanation 🐓👍🏻

@Brian_the_repair_guy

Жыл бұрын

Thank you, I feel I could have done better on this one.

Hi,very helpful thank u!

@RafaelHernandez-fj2oz

Ай бұрын

How can I check the pressure with a gauge and where will that be? And what gauge do u recommend?

@Brian_the_repair_guy

Ай бұрын

@@RafaelHernandez-fj2oz you need a high pressure glycerine filled gauge. It will be attached to a T and will attach to the output of your pressure washer and your pressure hose attaches from there. If you find me on Facebook, I will give you pictures.

Hello.. You forgot to mention. To check hydraulic pressure first before. You do this step.. thank you

@Brian_the_repair_guy

Жыл бұрын

I didn't forget. This video was "how to calibrate the pressure control on a Speeflo" not "how to diagnose pressure issues on a Speeflo"

I have a speed flow as well, the top of the hydraulic piston head gets very hot within 15 minutes of use is that normal? Do you have any videos of repairing that issue?

@Brian_the_repair_guy

4 ай бұрын

I usually don't do Speeflo videos. Most of the repairs take longer and are more detailed. The hydraulic motor does get hot when used. The question is, does yours get too hot? Is this a machine you have used for some time or is it new? Are you familiar with them or is this a new type of system for you?

🤔🙂