My son's one has been build in an evening last friday, including all electronics , and made his maiden flight (4min.30) on the next morning. In the hands of a full rookie (apart of few hours on simulator), it's a formidable machine!

@OneManUnmanned

4 ай бұрын

Thanks, I appreciate the feedback.. I'm looking forward to building mine.

Very cool bro, I'm going to build mine now

Thanks for sharing, interesting design for sure! Cheers!

@OneManUnmanned

4 ай бұрын

Thanks, it does have a unique design.

Thanks for this video! I'm following it today/tomorrow to do my Mario build! very informative,. thanks alot. Just one question, for GPS, what options for mounting do we have? many thanks!

It's one of many easy builds I have done . Came together easy as.

@OneManUnmanned

Ай бұрын

Thanks

I just did the Master 5 V2 build, lots of fun and a solid frame.

@OneManUnmanned

4 ай бұрын

Awesome.. this one does feel VERY solid. I was skeptical at 1st, but by the time it was assembled, it felt sturdy.

@MikeCarr07

4 ай бұрын

@@OneManUnmanned I pulled a bonehead move, I was testing Rescue Mode and I didn't think it was doing anything, I went to switch modes but I disarmed it instead....130 feet drop, nose first, fortunately it landed in a bush but I don't think the frame would have been damaged much. Now I man practicing muscle memory drills on my transmitter.

Great review

@OneManUnmanned

4 ай бұрын

Thanks, I appreciate the support.

Been flying the old speedybee fs225 v2 for nearly 3 years now and still love the frame. Have you seen their mario 8 folding frame?

@OneManUnmanned

4 ай бұрын

I've seen it, but it's not for retail...At least not on the SpeedyBee site. I think you have to go to Bangoood or Alibaba to find it. I inquired about it months ago, but was not available for review.

Thank you again. I'm sorry, I do have one more question if you don't mind. Since I want to install a GPS, it looks like I will have to install the FC/ESC stack backwards in order to have the XT60 come through the front. However, I don't want to do that, since it will mess up the length of all the other cables from the connectors on my F7 V3 stack. If I mount the FC/ESC stack facing forward, is there enough room between the stack to pull a long XT60 pigtail through to the front?

@OneManUnmanned

4 ай бұрын

I'm confused about the last part of your question, but I just finished the build on this frame today. I used some electronics from a previous build, but I had to install the FC and ESC in reverse like you asked. I did NOT utilize the XT60 plug integrated in the rear TPU. I actually wired and routed the battery lead through the front hole. There was actually space for the capacitor between the front FPV camera and the flight stack.

@Binkoro

4 ай бұрын

@@OneManUnmanned No worries. I figured O can install tue FC facing forward and the ESC facing backwards. as long as the FC is facing forward, everything is good. i just have to reverse tue order and direction of the motors.

Good frame vid, will come back to see it get its' guts packed

@OneManUnmanned

4 ай бұрын

Thanks!

hey , do you have a v1 dji air unit you could test fit in that frame for me ? speedybee told me the v1 air unit would fit in the rear but my concern is if the camera cable will reach the front mount

@OneManUnmanned

4 ай бұрын

I just did the build this afternoon, but I don't own a V1 Air Unit, sorry.

@fnkycoldmedina

4 ай бұрын

@@OneManUnmanneddid you put a 03 unit in it ? if so was there length to spare as far as the cam cable? i believe the cable on the 03 is 115mm and the v1 is 100mm

You are right, not an easy one, beautiful tho ❤

@OneManUnmanned

4 ай бұрын

It is beautiful... But it was difficult to hold the mid/ bottom plates, keep the front camera parts together, and know what bolts to use during assembly. It did turn out great, though, and should be an awesome build.

@damaca_fpv

4 ай бұрын

@@OneManUnmanned yes, when I was finishing the build I notice the middle part was bent 🤦🏻 And I had to do it all over again hahaha but I love it. Hope it flights as well as it looks

is there enough space to fit a VTX with the following dimensions? 36mm*27.5mm*8mm

@OneManUnmanned

4 ай бұрын

What VTX is that? I'll be installing the components in the next day or two...I can check.

@Binkoro

4 ай бұрын

@@OneManUnmanned It's the Foxeer Reaper Extreme.

@OneManUnmanned

4 ай бұрын

OK, so I just did some measuring, and here is what I have. 40mm from front to back(mid standoff to where rear TPU starts) 38mm side to side (width) 23mm from mid plate to top plate (height) Hope this info helps.

@Binkoro

4 ай бұрын

@@OneManUnmanned thank you!

first 🤙

not so difficult

@OneManUnmanned

4 ай бұрын

Maybe not for you, or me for that matter, but compared to other frames, it's a bit more difficult. If you look at any reviewers that built this frame on camera, they had a few "fumbles" or mishaps, including myself. It's still a good quality frame and done, just not the easiest to assemble, especially with the not so clear instructions.