Thanks for this amazing video! Just ordered the Bee35 and will do a self build 🙂 already have a speedybee drone and controller plus goggles so just adding to the collection

@WhirlyBloke

2 ай бұрын

You'll love it and it's super strong.

@stewartabel

2 ай бұрын

@@WhirlyBloke It's coming tomorrow, i can't wait 🙂

Thank you so much was considering getting this now I definitely will

@WhirlyBloke

3 ай бұрын

You're very welcome. You'll love it!

Good video and that looks like a very nice quad

@WhirlyBloke

10 ай бұрын

I love it.

Very nice video and very nice pictures ;)

thank you Nice review😍

@WhirlyBloke

5 ай бұрын

That's for the comment and for watching.

Goddamn gorgeous drone

@WhirlyBloke

9 ай бұрын

It sure is.

That's a beautiful cinewhoop. I built a 3 inch with very similar components about a year and half ago. Even put a bottom sensor on it for altitude and position hold at low altitudes, which works decently. It is an old school frame though and even though it flies real well, I love the looks of this one. I think II'll move everything over to this frame in the near future. Time to update Inav on it as well, so I'll be looking for your setup video.

@WhirlyBloke

10 ай бұрын

INAV is the only to go if you want performance similar to a DJI Avata. Maybe not the long flight times, but certainly the smooth handling, altitude and poshold to get great cinematic footage.

@kurtzFPV

10 ай бұрын

@@WhirlyBloke Just pre-ordered the pro direct. Shipping is free as well. Great deal on a beautiful frame! Thanks for showing it to us. I will be using a full size flight stack, which they said would fit, but be a bit challenging. Can you tell right off-hand what the difficulties will be? Will the USB port be difficult to access? Using the Speedybee V2 full sized stack.

@Sonic_Ox

6 ай бұрын

Hey Kurtz, Were you able to wedge the full size FC into the Bee 35? I'm auditioning flight controllers right now. Every thing I'm reading including the Speedy Bee 35 manual advises against the 30mm stacks for this build even though it has 30mm holes... I'm looking at 20 and 25mm FCs and all in ones but I'm hesitant because I've only ever used the full size versions. Happy flying amigo. 🍻

@kurtzFPV

6 ай бұрын

@@Sonic_Ox Gracias compadre. Yes, I was able to fit the Speedybee V2 30 X 30 stack, but it is a weird build with the flight controller on the bottom and the ESC upside down on the top. It flies great though, so it was worth the trouble. There is a really good build video by Bilu Media showing the 30 X 30 stack mounting. That said, I'd probably go with an AIO if I didn't already have a few of the V2 stacks. Found a deal on F7 40A aio on Nick Burn's channel and bought two, but haven't received them yet. Oddity RC is the place where I purchased.

@Sonic_Ox

6 ай бұрын

Thanks for the reply Bryan. I've been enjoying your channel and did see that you were able to fit the full size stack. I do think I'll look at the AIOs if I find one that satisfies my wishes for this build. I intend to go digital with the 03 air unit and I also like to have full GPS functionality (INAV) and I'm planning 6s power. So I want an AIO with sufficient UARTs and with sufficient amp rating on the ESCs. I've been looking at the offerings from Diatone (Mamba) but I am also still thinking about the mini F405 and keeping it all Speedy Bee. I'm running their full size F405 V4 55 amp in my 7" build and it's been flawless. It's nice to have options. Thanks again for your input Bryan. Happy flying amigo! 🍻

Good content. Love your channel. Lack of artificial happiness present elsewhere is so pleasing :) I wonder how much quieter is this as Avata screams as kid during first vaccination. Flown it at dawn to make sunrise shoots and woke up people nearby, not mentioning all birds. There are phone apps measuring dB, maybe you can do short test making next vid. The only thing I'm missinig with these builds (have 5" cinewhoop) comparing to Avata it ability to make easily nice top-down footage.

@WhirlyBloke

10 ай бұрын

Now that we have prop guards rather than full ducts things are a bit better. I did a whole video on cinewhoop noise about 3 years ago when cinewhoops were THE big thing kzread.info/dash/bejne/po6N1LmAorPFYaQ.html

@tobydz

7 ай бұрын

Yeah that Avata is LOUD AF....just screams...

Very interesting and informative video. I just ordered the pro version today. Running 4S on this motor and prop combo? Looking forward to seeing your inav video. Thank you for sharing. 😎

@WhirlyBloke

6 ай бұрын

Have fun.

would have been nice to have seen it fly and how smooth the motors and props really work for a Cinewhoop. Assume you are running on a 4S witha 2300KV motor?

Looking forward to the inav part of this - Im building one of these right now and Im going to use your solution for mounting those diversity antennas ... Did you use anything special for mounting the receiver? Just subscribed - I guess the Bee35 search I did is what got your content in my feed, glad i found it.

@WhirlyBloke

4 ай бұрын

Coming soon. I'm maxed out with my day job. 🤪

At the end you say you will do a video where you set up INAV on this drone, can you tell me when that will be out? I am very interested in that!

does the yellow back tpu includes 2 sleeves to fit 2 DJI air unit antennas? i can see holes on 2 sides on some pictures but does it have that open cutout so the antenna slots in? much like 5inch speedybee fs225 frame tpu mount

@WhirlyBloke

8 ай бұрын

The multi-function mount has holes to fit all sorts of antennas. Checkout the manual and images on their product page bit.ly/3PslIeJ

nice review i will build one of these... would be interesting which lipo with wich flighttime you have? thx

@WhirlyBloke

8 ай бұрын

Around 4-5 minutes with a 1300mAh LiPo

Hello friend, this frame is an original speedybee, I want to build one, do you have the link to the frame where you built your drone?

Why this motor on protek35 need 55A esc?do you fly with 4s or 6s with 35A?

Great video and great build. Would you be so kind as to list all of the components used for the build? Thank you.

@WhirlyBloke

10 ай бұрын

I've listed them all in the video description now. Thanks for watching.

Really nice video. To connect DJI o3 to UART1 - Do I need to solder any wires?

@WhirlyBloke

4 ай бұрын

That totally depends on the flight controller. Some have a JST type connector on and some have solder pads. Some even have both. The F405 Mini I used on this build kzread.info/dash/bejne/pJWVsdaSp6bdnps.html just has solder pads. Thanks for the awesome feedback.

I have a hglrc sector 132 2'5 im wondering if I can frame swap and upgrade motors? Vista/crossfire

@WhirlyBloke

8 ай бұрын

It sounds plausible, but I don't have an HGLRC sector 132 so I can't be 100% sure. Do let me know how you get on. And thanks for watching.

Nice review and an interesting looking build. Tempted to try one but struggling to find Xing2 2205/2300Kv motors in the UK. Where do you source yours from? I can see the Xing 1 versions online but th V2's are much better looking ;) All I have are some RCX 2205/2633KV on a old Karearea Talon clone. Alternative is to use 1806, 2004, 2006 as per the official SpeedyBee recommendations. Any pointers appreciated👍

@WhirlyBloke

10 ай бұрын

I've now listed all the components in the video description. I got bucket of Xing 2205 2300Kv for my Shendrone Squirt builds earlier this year from HobbyRC. I'm not sure if they still carry them. But I've found ordering direct from iFlight is reasonably fast an reliable. It's one of the nicest cinewhoops I've built and watch out for the INAV setup - i'ts the only way to go for true cinematic and smooth cinewhoops. Thanks for watching.

@Ddraig62SPD

10 ай бұрын

@@WhirlyBloke Thanks for putting the list up :) No stock on HobbyRC but I see the old Xing versions on your Buzzflyer link. I'll continue to look for deals! Still have to build my Master V2 so plenty of time ;) Keep up the great content! 👍

Hi, thnks for video, what are your thoughts if try to build it with analougue VTX? Or better to choose another frame?

@WhirlyBloke

9 ай бұрын

There no reason you can't use an analog VTX in this frame. TBH the frame is such good quality and flies well I use it in place of my Shendrones Squirt. It's OK at acro, but that's not what it's designed for. But it is a great FPV camera platform and you can fly it slow if you want that cinematic footage. Best of luck with your build.

@Dude17239

9 ай бұрын

@@WhirlyBloke thanks for replying, I am currently researching what I can use for first drone to build, but a bit on a budget.

Thanks for another brilliant video Whirly Bloke. As always, your content is interesting, informative, and entertaining. This video was the main inspiration behind me ordering a Speedy Bee 35 pro led frame just yesterday! This build will take me awhile though because I plan to go digital with no compromises. My drone budget is currently only $100 per month so this one may take over a year lol. Oh well, I have my recently completed 7" analog build occupying my time and imagination as I slowly acquire parts for the 3.5". I too plan to exploit the GPS functionality that INAV offers though I've found INAV 7 to be inferior to INAV 6 as far as GPS functionality is concerned. Have you (or anyone reading this) experienced this? I seem to get fewer satellites to lock with INAV 7 than with INAV 6 and the GPS hold function is way less stable. If anyone has suggestions, I'd love to read them. But I digress lol. Thanks again for another great vid Whirly Bloke. Happy flying amigo. 🍻

@WhirlyBloke

6 ай бұрын

Thanks a ton for your awesome comment! It's fantastic to hear that you enjoyed the video and that it inspired you to order the Speedy Bee 35 Pro LED frame - that's a solid choice! Going digital with no compromises sounds like an exciting plan, and it's great that you're taking your time to build something special. Your budgeting strategy is both disciplined and admirable - a year might seem long, but the anticipation will make that first flight even more rewarding. Your 7" analog build sounds like a blast too! As for the INAV GPS functionality, your insight is valuable. I haven't personally experienced the differences between INAV 6 and 7, but your question might resonate with others in the community. If anyone has suggestions or experiences to share, feel free to chime in! Happy flying on your 7" and best of luck with the upcoming 3.5" build. 🚀 Cheers, amigo! 🍻

@Sonic_Ox

6 ай бұрын

Thanks so much for the reply Whirly Bloke. I know you're a VERY BUSY guy. I really value your opinion. You're huge in the KZread scene and obviously have a great deal of experience with RC technology of all sorts. Thanks again also for producing such a wonderful channel. I hope you have a happy, healthy, and prosperous 2024. Happy flying amigo. Cheers.

@WhirlyBloke

6 ай бұрын

@@Sonic_Ox I try to do my bit where and when I can. 😀

@Sonic_Ox

6 ай бұрын

I wanted to mention that I think I've discovered a fix to my GPS functionality issues in INAV 7. Well, I didn't come up with it but I did just discover a video from Mr. D - Falling With Style. Darren explains that in INAV 7 the GPS page looks and acts differently than the GPS page in INAV 6 and when you activate all the constellation tabs in INAV 7, they will reset to a deactivated state upon save & reboot! Darren also suggested activating the UBLOX 7 tab if you have a newer GPS module to see if it is UBLOX 7 capable. I live in Arizona, USA (Darren is in the UK) but I activated the constellation tabs for EU and CN (not RU) as well as activating the UBLOX 7 tab and VOILA! Upon save and reboot, I acquired 15 satellites INSIDE at my computer almost instantly! I was lucky to get 10 outside with INAV 7 before. I was routinely acquiring 20 outside with INAV 6. I can't wait to flight test tomorrow (hopefully). I will paste a link to Darren's video at the end of this comment. I just wanted to gain exposure for Darren's video because I think quite a few folks are seeing decreased GPS functionality with INAV 7 compared to INAV 6. Happy flying amigos! kzread.info/dash/bejne/fKqJqcmpc9XFlbQ.htmlsi=4h6AnKoS1g1aBfIu

Thanks for the video!! Woild you be so kind to let me know, which batteries you are using with this build? Thanks

@WhirlyBloke

9 ай бұрын

Nothing special 4S 1300mAh.

@BentRim

5 ай бұрын

@@WhirlyBloke What kind of flight times are you getting? I need to order some new batteries now that my build is complete. Have you made the inav video you talked about yet?

Ola amigo como q faço pra comprar essses motores

Would you please share your iNav config dump for this one? I would like to build my first iNav drone, but the configuration (especially tune) is too intimidating, so that I only are on betaflight till now.

@WhirlyBloke

6 ай бұрын

The INAV version isn't finished yet, but I'll post all that when I get the update video done.

@HansBaier

6 ай бұрын

Great, thanks 👍

Can you tell me if anything else fits in other than 03 air unit?

@WhirlyBloke

5 ай бұрын

It's designed for the O3 and RunCam Link, but with a bit of work you could fit practically anything.

@RohitJalui-qq5jt

2 ай бұрын

Speedybee vtx

What battery did you use, and how long the flight time was? Thanks

@WhirlyBloke

7 ай бұрын

GNB 1100mAh 6S and I get between 4 and 6 minutes depending on how I fly. Thanks for watching.

I've made this build and flies great. I've posted a video of my speedybee bee35 build on my channel

@WhirlyBloke

9 ай бұрын

It's a dream to build.

Great video Which GPS system will you use? tnx

@WhirlyBloke

10 ай бұрын

I'm using the Matex M10-5883. Video coming soon.

@horizonskyfpvrc6152

8 ай бұрын

@@WhirlyBlokewill it fit into the GPS mount?

@BentRim

5 ай бұрын

@@WhirlyBloke Looking for this video? Sorting this out at the moment myself.

will it accommodate avatar moonlight vtx?

@WhirlyBloke

Ай бұрын

That shouldn't be a problem, but you'll probably need to modify the VTX module mount a bit.

Did you have to solder the o3 to the fc? I mean UART ports .

@WhirlyBloke

4 ай бұрын

That totally depends on the flight controller. Some have a JST type connector on and some have solder pads. Some even have both. The F405 Mini I used on this build kzread.info/dash/bejne/pJWVsdaSp6bdnps.html just has solder pads. Thanks for the awesome feedback.

@dronefilmsgermany

4 ай бұрын

@@WhirlyBloke Thanks a lot. Actually I found the FC which doesn't require soldering its the SpeedyBee F405 V4 BLS 55A 30x30 . I wanted to know if I can add the same motors as per your Build to this? Xing 2205 2300kV

@WhirlyBloke

4 ай бұрын

@@dronefilmsgermany I don't see why not, but they're a bit hard to find these days. I bought a few sets ages ago for my other builds.

Hello! Great video! Will it work on 4s or do you recommend the 3200kv? Instead of the 2300kv?

@WhirlyBloke

3 ай бұрын

That combo should work fine.

@Pieter3979

3 ай бұрын

@@WhirlyBloke thank you for the quick answer! Just ordered the 2300kv with this drone for a 4s setup! Keep up the good work! 💪🏻

@WhirlyBloke

3 ай бұрын

@@Pieter3979 let me know how you get on.

@Pieter3979

2 ай бұрын

It’s flying! 🎉 thank you for the help! 😊

@WhirlyBloke

2 ай бұрын

@@Pieter3979 Awsome work mate.

You no longer get the cushioned camera mount with the Pro version. It's an available option now.

@WhirlyBloke

8 ай бұрын

That's a shame. Thanks for letting me know.

Will the 35A esc be enough for the 2205 2300kv motor?

@WhirlyBloke

10 ай бұрын

It's a combo I've used on my Shendrone Squirts for a while now with no issues. If this was an all out racer drone, then no.

@nagylacky

10 ай бұрын

@@WhirlyBloke6s?

@WhirlyBloke

10 ай бұрын

@@nagylacky 4-6S

@nagylacky

10 ай бұрын

Thank you!

Do you think the Walksnail vtx will fit in this chassis? Thank you.

@WhirlyBloke

10 ай бұрын

At the moment it's just DJI or analog, but maybe they'll upgrade it. It only really depends on the fit in the bottom metal frame plate.

@martinbeavers1742

10 ай бұрын

Thank you. I will watch for additions. @@WhirlyBloke

@AxxieFPV

8 ай бұрын

I put the new Walksnail V2 (Dual Antenna) in mine, it fit fine. I didn't use the metal CNC bottom though. Just the standard carbon one.

@WhirlyBloke

8 ай бұрын

@@AxxieFPV That sounds great. If the Walksnail is too tall to fit with the bottom CNC plate, you could use longer screws and put spacers between the bottom plate and the central frame piece.

@AxxieFPV

8 ай бұрын

That's exactly what I did! @@WhirlyBloke

you dont get the cushioned go pro Camera mount with the Pro its an additional cost

@WhirlyBloke

6 ай бұрын

It's sometimes confusing when I get sent early products for review cos some of the final details haven't been 100% decided. Apologies if it confused you. And thanks for the update - it's always appreciated.

Not all the parts are included in the pro version as you say .. just bought 2 sets and there is no gopro mount included .. BEE35-AS

@WhirlyBloke

9 ай бұрын

Maybe it was my pre-production version that included that. Thanks for letting me know.

i did not get that instruction sheet

@WhirlyBloke

5 ай бұрын

Well surprise, surprise, it's downloadable from the SpeedyBee website. If you can't find it, here's the link store-fhxxhuiq8q.mybigcommerce.com/product_images/img_SpeedyBee_Bee35_Frame/SpeedyBee-Bee35-Manual-EN.pdf

I go with the same frame. Maybe i will choose the mamba f22 mini 55A. Which Motors and Props would you recommend? Still the Xing 2205 2300kv and the same props in the video? Need the Whoop for a GoPro12. A answer i would apprecriate.

@WhirlyBloke

7 ай бұрын

I've found the Xing 2205 2300kV HQProp Duct-89MMX8 props to be a combination that works well for me on several cinewhoops I've built. Although the Xing motors are harder to source these days, but I bought a bucket of them when I knew they were good and I'd need a few. Thanks for watching.

looks like a foxwhoop 35 or a cinelog 35

@WhirlyBloke

9 ай бұрын

They're all similar footprints, but the Bee35 is a much better design and quality. Thanks for watching.

Can you give the circuit diagram?

@WhirlyBloke

6 ай бұрын

Here ya go store-fhxxhuiq8q.mybigcommerce.com/product_images/img_SpeedyBee_F405_Mini_BLS_35A/SpeedyBee-f405-mini-stack-Manual-en.pdf

What’s the weight

@WhirlyBloke

10 ай бұрын

Without a battery it's 320g using the components listed in the description. Thanks for watching.

"Avata beater" Doesnt even has horizonsteady 😂😂😂

@WhirlyBloke

9 ай бұрын

If you use BetaFlight you're 100% correct. However my followup video will show how to use INAV that has sub cm accurate GPS position hold, altitude hold, optical flow/lidar, waypoint missions, reliable and accurate RTH. And that's how this excellent frame becomes a DJI Avata beater for a fraction of the price. Here's a small sample of what INAV can do kzread.info/dash/bejne/ZqOY1qt-nJPXYrA.html Thanks for watching.

@CappaGTC

9 ай бұрын

@@WhirlyBloke Im not talkin about horizon mode, I mean the footage stabilization. Thats the feature that made me buy one.

@WhirlyBloke

9 ай бұрын

@@CappaGTC The DJI O3 camera and Air Unit are almost exactly the same as the system on the DJI Avata including all the stabilisation processing. You can use the built in RockSteady or process the footage quickly and easily using GyroFlow for free. That has horizon lock if that's what you're after. Personally, I prefer to use GyroFlow cos I think it produces better results and you have more options and fine control if you need it.

@CappaGTC

9 ай бұрын

@@WhirlyBloke I got several o3 units, including the avata, I tested what u say and the quality of already stabilized footage doesnt even come close