South Bend's "How to run a lathe" (stabilised)

Ғылым және технология

If anyone has the original footage please let me know, it would be great to get it digitized properly.
This version is stabilised with KZread's built in tool

Пікірлер: 74

  • @gristlepounder
    @gristlepounder3 жыл бұрын

    I have one of these my Dad got in 1947. Still runs great to this day!

  • @tinucus9218

    @tinucus9218

    Жыл бұрын

    just bought one from 1936, I'm getting into machining, and this was the most inexpensive tool I could find, such a cool piece and of such quality.

  • @Chris-pb3se

    @Chris-pb3se

    2 ай бұрын

    Great machine. I want one to replace my Chinese benchtop anchor. I have a 1924 Van Norman mill with a Bridgeport head and it runs fantastic. The old ones aren’t good for productivity but for precision and prototype work they’re a joy to run.

  • @pamtnman1515
    @pamtnman15154 жыл бұрын

    Makes me love America even more. Thank you for posting this

  • @Hotbeefsamich
    @Hotbeefsamich7 жыл бұрын

    This classic film will never die! Nor will lathes until everything is eventually burned up!

  • @flatheadronsgarage7345
    @flatheadronsgarage73456 жыл бұрын

    Thanks for sharing. Timeless and inspiring.

  • @dw.7655
    @dw.76554 жыл бұрын

    Nice to see a video from the archives of South Bend Lathe Works. Have to put this with our documentation of our 9 inch SBLW

  • @KohalaIronWorksCase
    @KohalaIronWorksCase10 жыл бұрын

    This video, in spite of it's age...still applies...

  • @FrustratedBaboon

    @FrustratedBaboon

    6 жыл бұрын

    Except safety. No goggles.

  • @kevinpulver4027
    @kevinpulver402710 ай бұрын

    Thank you for posting this! I've got a heavy ten south bend but I need to learn to thread with it

  • @littlestworkshop

    @littlestworkshop

    10 ай бұрын

    There is a book by the same name, still available which might be worth getting. Here is an OK pdf of it: www.vintagemachinery.org/pubs/1617/3789.pdf

  • @jeremyarnold1979
    @jeremyarnold19792 жыл бұрын

    That's a beautiful lathe

  • @mrhhj
    @mrhhj7 жыл бұрын

    I just bought a south bend from the late teens early 20's. this helped a lot because I didnt receive info just the machine.

  • @littlestworkshop

    @littlestworkshop

    7 жыл бұрын

    Google "how to run a lathe". It's a good book by Southbend covering a lot of things, really handy even now. There are a pdfs available online.

  • @thespiritof76..
    @thespiritof76..5 жыл бұрын

    Back then a mechanist came to work in a tie! We could learn a lot from looking back

  • @deependz3231

    @deependz3231

    3 жыл бұрын

    Sure he did, and his chauffeur dropped him off at the main gate.

  • @JosephDAndrea0121
    @JosephDAndrea012111 жыл бұрын

    Would Love to have the original as well. Thanks for posting it.

  • @MatthewHolevinski
    @MatthewHolevinski2 жыл бұрын

    A machinist and his lathe is a terrifying force to be reckoned with. One of those early nuclear research reactors had a guy and a lathe supporting operations, and they apparently needed something like an Ion chamber, and he was like I had no idea what a plasma chamber was but once they showed me what it looked like I made em one and they were able to get the reactor built.

  • @Jankyvision
    @Jankyvision10 жыл бұрын

    I love watching old videos like this. Very informative. I also find it amusing to see that in 1941 safety glasses were of no concern in a trade where there is flying metal bits.

  • @rosecorder3550

    @rosecorder3550

    Жыл бұрын

    No need, they had the good old-fashioned safety squints! Lol

  • @patrickvedder2623
    @patrickvedder26238 ай бұрын

    Thank you for this video. I just bought a SB 10L Heavy. This video answered a lot of questions I had.

  • @littlestworkshop

    @littlestworkshop

    8 ай бұрын

    This may also help: www.vintagemachinery.org/pubs/1617/3789.pdf print copies are still available.

  • @RustyInventions-wz6ir
    @RustyInventions-wz6ir3 ай бұрын

    Just found your channel and Subscribed. Very nice video

  • @BH_tradie
    @BH_tradie3 ай бұрын

    I still got 1 was the first lathe I ever bought. ❤

  • @Jpetovic
    @Jpetovic6 жыл бұрын

    Thank You!!!

  • @bluehornet6752
    @bluehornet67526 жыл бұрын

    Love the guy oiling with that thumb-powered can. Look at how fast he can go! Of course the fact that no oil is actually coming out (because he isn't actually depressing the can bottom) tends to simplify matters too...lol.

  • @jimmurphy6095

    @jimmurphy6095

    3 жыл бұрын

    For demonstration purposes only... I noticed that as well... I was waiting for the budunk budunk of the can bottom... His thumb never pushed it.

  • @rickybulao5112
    @rickybulao51124 жыл бұрын

    Mesin bubut klasik 👍

  • @austinwagoncompany
    @austinwagoncompany11 жыл бұрын

    I like this video, it has let me know how these work and what to look for on one I'm interested in. I run a cnc lathe at work but I've never ran one of these. We do have a DoAll lathe.

  • @65sgboogieman8

    @65sgboogieman8

    5 жыл бұрын

    So, how did it go?

  • @nevetslleksah
    @nevetslleksah2 жыл бұрын

    The lathe is said to be the only machine tool that can reproduce itself. That’s a ‘stretch’. Sure, there are a lot of round parts on a lathe, but how is a lathe used to produce the bed or the carriage, just to name two major parts that come to mind. These require milling and perhaps grinding.

  • @littlestworkshop

    @littlestworkshop

    2 жыл бұрын

    It's possible to mill on a lathe with an accessory to add vertical movement to the cross-slide and indeed many a model engineer has done this, I personally have held small parts in the tool holder to mill slots before I had a mill. Reproduce no, but producing a lathe on a lathe is certainly possible. But indeed it is a bit of a nonsense statement just used to describe the machines versatility which can certainly go well beyond basic turning with milling, broaching, jig boring, ID and OD grinding etc etc.

  • @micahatticus4257
    @micahatticus42572 жыл бұрын

    I bet this is the 13 inch model. Mines the 16 and almost exactly the same. mine does not have the underbelt drive in the cabinet though and I think its a early model because of this but not sure.

  • @sawboneiomc8809
    @sawboneiomc88096 жыл бұрын

    People forget that these craftsmen used inferior tools to create superior tools..no computers to do it for them

  • @thespiritof76..

    @thespiritof76..

    3 жыл бұрын

    Damn good point saw bone

  • @Wa3ypx

    @Wa3ypx

    2 жыл бұрын

    They actually had to do math equations e.g. how to cut gear teeth to the exact TPI and make the whole think come out even.

  • @RickRose
    @RickRose8 жыл бұрын

    Thanks for posting! Where did you find that footage?

  • @littlestworkshop

    @littlestworkshop

    8 жыл бұрын

    The interweb somewhere. I'd love to get the original to digitize

  • @waitemc
    @waitemc3 жыл бұрын

    Turning between centers , hehee

  • @yota4004
    @yota40043 жыл бұрын

    so much for using 4 different types of oil...

  • @ronaldooliveira5131
    @ronaldooliveira51315 жыл бұрын

    Sou fã desta marca (Southbend), tenho uma furadeira de bancada (drill press) gostaria de poder ter um manual original. Um pouco difícil, não é? Mas esta marca é uma perfeição!!! Ronaldo, São Paulo/Brasil

  • @littlestworkshop

    @littlestworkshop

    5 жыл бұрын

    vintagemachinery.org/pubs/1617/2004.pdf

  • @_kcirdlem_6816

    @_kcirdlem_6816

    3 жыл бұрын

    Gee thanks :-)

  • @ronaldooliveira5131

    @ronaldooliveira5131

    3 жыл бұрын

    Obrigado pelo manual. Fico muito grato mesmo. Que Deus abençoe você meu amigo. Ronaldo

  • @kennardwing3192
    @kennardwing31928 ай бұрын

    The lubrication instructions that I have for my 9" South Bend lathe call for 3 different lubricants for different points. This video shows one lube used all over the place. Spindle and carriage have their own lube (light). Gearbox has its own (medium). Most of the rest uses one (more viscous). There's actually a fourth for the shaft inside the back gear shaft ( a grease), but I haven't followed instructions on that. What are others doing?

  • @littlestworkshop

    @littlestworkshop

    8 ай бұрын

    It's quite possible they are faking the oiling to avoid complication swapping oilers for the film. Any oil is better than no oil and regular oil is probably best of all. On my Feeler/Hardinge a way oil is specified for the ways, a spindle oil for the spindle and an ATF for the gearbox plus some grease in the threading gearbox and I bought what was recommended but doubt it matters much for light use especially.

  • @alias1719

    @alias1719

    8 ай бұрын

    Your lathe came with instructions? 🙂 Mine predates this film, and I was told - by the previous owner - to add 90w gear oil for everything. But, he told me he was a farmer, not a machinist . . . . Hmmm.

  • @estibensoldador9353
    @estibensoldador93533 жыл бұрын

    Lastima que no tiene subtitulos en español

  • @drmodestoesq
    @drmodestoesq5 жыл бұрын

    Lathe: The only machine that can reproduce itself. That's a bit of a stretch. I can think of a lot of components of the lathe that would be a real challenge to recreate. And I'm not going to cheat and say, what about the motors and belts? How about the bed ways? The chuck jaws? How about, "A machine that can almost reproduce itself." Or, "A shop with and lathe and its brother the milling machine can almost reproduce themselves." It almost sounds like a challenge.

  • @littlestworkshop

    @littlestworkshop

    5 жыл бұрын

    You can make a lathe on a lathe but not the same lathe. It's a nonsense saying but they are very versatile and you can mill on them.

  • @richacker3994

    @richacker3994

    5 жыл бұрын

    What type of lathe is this ???

  • @debradisharoon
    @debradisharoon7 жыл бұрын

    God, don't let the P.C. police get hold of this one! LOL. Glad we still have conventional lathes to play with in spite of the CNC revolution.

  • @MaineMachinist

    @MaineMachinist

    5 жыл бұрын

    still around to "play with?" Manual Lathes are still in use every single day by Tool & Die makers and General Machinists. Just because much of the industry has gone to be Button Pushers, doesn't mean real Machinists still aren't around. I'm proud to be one.

  • @mrayco

    @mrayco

    5 жыл бұрын

    First and last manual machinist is the source of this revolution am one of them

  • @drmodestoesq

    @drmodestoesq

    5 жыл бұрын

    @@MaineMachinist And let`s not forget the hundreds of millions of people living in the Third World or in the middle of nowhere at a mining operation in the Andes or something. Parts are insanely expensive and have to be flown in. And a broken part can shut down an entire operation.

  • @ivankoran

    @ivankoran

    3 жыл бұрын

    What about this is against PC? Also, manual lathes are still very common. They still make brand new em and I still use them. I’d hate to rely on my cnc machines for every tiny job in my shop.

  • @andreweppink4498

    @andreweppink4498

    Жыл бұрын

    @@ivankoran - There are still hand machinists around but not very many of 'em anymore.

  • @JSokil
    @JSokil5 жыл бұрын

    He is applying the same oil everywhere which in incorrect according to southbend, should have 4 different oil cans...

  • @littlestworkshop

    @littlestworkshop

    5 жыл бұрын

    It's probably empty anyway :)

  • @jdirt1982
    @jdirt19826 жыл бұрын

    I think I watched this video at my maturation assembly ........

  • @ralmonrode
    @ralmonrode5 жыл бұрын

    I purchased the DVD set from someone that must have had the original movie mine looks much better than yours. I reference these videos all the time for my South Bend 10K commonly called a light ten. Please let me know littlestworkshop if you would like a copy of my DVDs. They also, sent with the DVD All the South Bend documents on running a lathe in PDF.

  • @3rdaxis649
    @3rdaxis6497 жыл бұрын

    Why are you using KZread video stabilization on this? Making me sick lol

  • @littlestworkshop

    @littlestworkshop

    7 жыл бұрын

    The original (which I have also uploaded) jumps around a lot this is better despite the odd weird bit.

  • @southbend3406
    @southbend34063 жыл бұрын

    Title should be South Bend Lathe....not Southbend as one word.

  • @littlestworkshop

    @littlestworkshop

    3 жыл бұрын

    8 years late but now fixed, thanks.

  • @southbend3406

    @southbend3406

    3 жыл бұрын

    @@littlestworkshop You're welcome. I was born and raised in South Bend, Indiana, and my dad even worked at South Bend Lathe Works in the late 40s or early 50s! This company and its products were a source of pride in the community because of their high quality products, sales success, great reputation all over the world. Excuse my pickiness, LOL!

  • @mdspaghetti4949

    @mdspaghetti4949

    3 жыл бұрын

    Just bought one and refurbishing it! Do you guys know where to find the year on the machine?

Келесі