Love seeing these tutorial style videos from Doc!

Thank you for sharing. 👍🏻

Super helpful video

epic sir

Looks great, is any random effect configuration in wled, or only one by one effect, thanks

Good video but can I ask is it possible to use in Home assistant automation?

Is there a way to do this with the roof lights and music? For example a Christmas display

nice

I’m curious, is WLED compatible, or can it be configured to control DMX stage lighting?

Nice... Can be done in the quad?

Nice video. Thank you. I am working on something similar. Should the VCC on Mic go to 5v or to 3.3v? I thought the esp32 is working with 3.3v logic.....

@tannerhart4069

2 жыл бұрын

For the Max4466 here, it gets anywhere between 2.4 & 5v to power it [according to the listing I'm looking at right now anyways], DrZzs wired it up with 5v since it would take it and he's got a convenient place to plug it in. The output from the 4466 goes into the analog pin on the ESP32 [A0]. So, if you've got he 4466, you should be able to wire it up to 3.3v if you want without a problem. If you're using a different mic or one that's digital, you'd have to wire it differently according to its needs.

Hello sir. I appreciate all the work you are doing. Question, does needing power injection always result in dimming to red? I have a situation where my string just fades to nothing. Thank you for your help. Also, thank you for the 2 data boosters i bought from your store.

@changchung

2 жыл бұрын

How you installation is exactly?

Is there a way to take a line in (from a music player) instead ?

I have a question on Xlight, how do you set up a matrix using 16x16 matrix panels I have 8 of them and I would like to make a 64x32 matrix but I can't figure out how to set it up on Xlight. Thanks for all the videos it helps a lot. I'm using esp32 with six ports running espixestick 4.3.

@DrZzs

2 жыл бұрын

Sorry, I have no idea. Come to Discord and ask the Pixelheads :) discord.com/invite/drzzs

I'd love to see you fiddle with Mycroft voice assistant

@DrZzs

2 жыл бұрын

I did a video a couple years ago about mycroft. I liked it. Haven't seen what they are up to lately. It was a good project. Last I heard they had stopped developing hardware but were focused on the software to run on a raspberry pi.

Hey guys can you connect a ICS-43434 to the Dig Quad? Little bit confused! Many many thanks if you can help a fellow LED Geek

Anyway add mic to esp 32 witouth solderin?

Is there a way to send a line level audio signal from my computer into WLED? I'd rather not use a mic. I'm currently using version 14.0. I have xLights. But I'm still trying to figure it out. 🙂 Edited on 11/21/2023 Never mind. It was a stupid question. I see (now that I've looked more closely at the DIRECTIONS 🙂) in the setting that I could just used the analog settings. In the end, I bought some INMP441s. It works great.

Thank you for the video. But where does the controller box end up? I did something similar with some pig shaped Christmas lights, so enquiring minds want to know. :-)

@DrZzs

2 жыл бұрын

good question. I haven't put one with a microphone outside. Usually I hide the controller somewhere near where the LEDs are. Either that or I put the controller close to the power supply. Totally depends on your exact project.

You did a great job in doing the video I just wished you used the same chip that I'm using witch is the esp32 blue 40 pin chip ( the small one Mini32 ) and don't know how to set it up or what pin I use to get it going can you please help me out. Thanks!!

@DrZzs

Жыл бұрын

Have an LED related question? Be sure to ask your question in led-lighting-diy- Channel on discord! discord.gg/8gvF67h Our LED masterminds, the PixelHeads, generally hang out there and can answer your question(s) swiftly.

What about the Dig-Octa?

Great video! Q: can you substitute in a 3.5mm Stereo audio input? Also what are the other pins used for? Thanks!

@Thundermonkies

Жыл бұрын

I am also wondering about this! please let me know if you found the answer.

Anyone know how to wire up the digital I2S mic? Do we still use AO for the Serial Data pin or should we move it to one of the External GPIOs (Q1 - Q4)?

@DrZzs

Жыл бұрын

Have an LED related question? Be sure to ask your question in led-lighting-diy- Channel on discord! discord.gg/8gvF67h Our LED masterminds, the PixelHeads, generally hang out there and can answer your question(s) swiftly.

Great video as always.......HOWEVER when you try to install online it just hangs and never finishes....... suggestions?

@DrZzs

2 жыл бұрын

Try an older version of SR-WLED

@TheCowboysdude

2 жыл бұрын

@@DrZzs I just went and downloaded the bin file finally and it worked. Thank you

I've got a dig uno v3. When I plug into the A0 pin (supposedly pin 36) I get no sound reaction. I can set the pin to in the settings to 32 and lights flash randomly, but they are not responding to the music. Is your sound pin in the settings definitely 32 as it is in the video? You also hooked up to 5v and the wiki suggests 3.3v. Lastly, what flashing method do you use, and on what OS? Thanks!

@DrZzs

2 жыл бұрын

Try pin 36

@richardmorrall9

Жыл бұрын

@@kilarger7181 Oh man, i am now at least 16 hours deep in to this problem. Same set up as you, Dig-Uno, and MAX4466, Ive tried A0 pin, as 36, Q4 as 32, nothing i do ever gets a flicker from the SR version. i feel like im missing something and getting very frustrated by the whole thing. I have them working perfectly on normal WLED, and even Hyperion worked as described, but not matter what i do, never a single flicker on any WLED version and any combo of pins, is there another step i could be missing?

@Rick210Texans

Жыл бұрын

@@richardmorrall9 don’t know if this will help my I used the VP pin 2 pins over from the 34

@richardmorrall9

Жыл бұрын

@@Rick210Texans and what PIN number is that for WLED?

@TheMc2nv

Жыл бұрын

I had this issue aswell. Use the same pins he shows in the video on the Dig. Change your settings to Squelch 5 and Gain 243. I then used a small flat head on the gain screw attached to the mic itself and turned it all the way up. This is what got it working for me. Im going to flip to a digital mic tho as I have had better input luck with thos. The above method does work, however. TIP: When setting the screw turn your music up and set it to the "gravcenter" fx and go each way on the screw to see what works. I fought with this for 20 minutes or so before i sorted out the gain levels.

Do u have any uno in stock? Because when I check it says no. I just spent $76 on 2 of them from China on Friday.

@TheCowboysdude

2 жыл бұрын

They are IN right NOW..... I just ordered 3 of them!!! I have a couple other things in mind for them..... ;)

@martinholland1652

2 жыл бұрын

dont hold your breath on that order I ordered a quad a month ago, still not arrived! rip off merchents.

@TheCowboysdude

2 жыл бұрын

I ordered them from Dr zzz site... so we'll see. I'm hoping not

@toddcoello6461

2 жыл бұрын

Hey Drzzz, is there dimensions to these somewhere or a 3d model so I can design some cases for the ones I've ordered? I could measure it out but it would be better if that information was already available.

Is there a way to connect an aux signal to a nodemcu for this purpose?

@DrZzs

2 жыл бұрын

Not that I know of right now. Check out the SR WLED github page or ask in the WLED discord chat. If it's possible, they'd be the ones who know how to do it.

Yo!

Did you have to go back and do power injection? With 5 meters of 5V, I was expecting to see that (but maybe not since they are not all on at the same time). 🤔

Can I use nodemcu instead of Dig uni ?

@DrZzs

2 жыл бұрын

Yes you can. The esp8266 has an A0 pin also. That's where you'll connect the microphone. Or you can use an ESP32 based nodemcu. Both will work just fine.

You can get that from AliExpress much cheaper than Amazon 😄

@DrZzs

2 жыл бұрын

Always true!

I know this is going to sound made up, but just yesterday I was looking at the mics bought for my Wemos D1 minis and what it’ll take to recreate dig2go functionality on my DigUNO. Looks like I won’t need to guess! 🎉

@DrZzs

11 ай бұрын

Nope! it's all been figured out already! Have fun!

@thesuperknot_

11 ай бұрын

Looks like the D1 Mini is not yet supported by SR. I got very far into the process before I realized this. Guess I’ll stick to NodeMCU for now.

Nice Project, but SoundReactive it doesn't work the way how the name describes it

@DrZzs

2 жыл бұрын

how so? There are effects that respond to the frequency of the sound, and others that respond to the volume. If you're looking for lights that are "Synced" to the music that requires software like "xLights".

I am pulling my hair out!, (no offence) :) I have a DigUno, a MAX4466 and SK6812 RGBW LED's. They work perfectly well on all versions of WLED, except, when I try and use an SR version, I can not get a single reaction that is SR. So, the connections go just as in this video, VCC to 5V, GND to GND, and OUT to A0. I set the analog input PIN to 36, nothing. I check, and there is indeed 5v at the MAX4466, I try various different MAX4466's, nothing. I move PIN A0 to Q4, and update the pin number to 32, reboot, nothing. I try powering from the 3V PIN, test it, getting just over 3V to the MAX4466, both pin configs as above, nothing. Its like I'm banned from using it, or there are a ton of secret setting I just don't know. I'm very frustrated and sad and annoyed at how long I've spent on this, and still have nothing to show for it. Does anybody have any idea what else I can try please?

@DrZzs

Жыл бұрын

Maybe try the new version 14 beta version of wLED. The SR stuff is baked in.Ask your question in led-lighting-diy- Channel on discord! discord.gg/8gvF67h Our LED masterminds, the PixelHeads, generally hang out there and can answer your question(s) swiftly.

@TheMc2nv

Жыл бұрын

I had this issue aswell. Use the same pins he shows in the video on the Dig. Change your settings to Squelch 5 and Gain 243. I then used a small flat head on the gain screw attached to the mic itself and turned it all the way up. This is what got it working for me. Im going to flip to a digital mic tho as I have had better input luck with thos. The above method does work, however. TIP: When setting the screw turn your music up and set it to the "gravcenter" fx and go each way on the screw to see what works. I fought with this for 20 minutes or so before i sorted out the gain levels.

This can quickly turn into a waste of time. My ESP32 do not have an AO or #36 pin...? Any other assignable pins...? It is the latest ESP32 as there are a few with different pin references.....anyone willing to assist...?

@TheMc2nv

Жыл бұрын

use pin 35 and change it in wled

@DrZzs

Жыл бұрын

Have an LED related question? Be sure to ask your question in led-lighting-diy- Channel on discord! discord.gg/8gvF67h Our LED masterminds, the PixelHeads, generally hang out there and can answer your question(s) swiftly.

WLED sound reactive is very poor, doesn't react how sound reaction supposed to be, hardly to keep with the beat, unless the volume is set to loud, and when set to loud it's not reacting, only flickering lol

@DrZzs

2 жыл бұрын

Is there something better you'd recommend? There are many different effects in SR-WLED. Some don't seem to do much. Others perform pretty well in my opinion. Would love to know what you've found that works even better.

😴 ᑭᖇOᗰOᔕᗰ