Nice work again. There will always be work whenever the cowboys come to town ☺️.

@brighton_locksmith

2 жыл бұрын

This is true! But it’s a shame they’re in town at all! 😁 Thanks for watching buddy 🙏🏼

@garethmcgrath5988

2 жыл бұрын

@@brighton_locksmith 100% they can leave some trail of destruction for the poor customer. Keep up the good work.👍👍.

that's a nice door jig.

@brighton_locksmith

2 жыл бұрын

Thanks mate. It’s great 👍🏼

Great video, just found you on YT, looking forward to watching you other videos

@brighton_locksmith

2 жыл бұрын

Thanks Giles. I’m glad you enjoyed the video. Hopefully you’ll enjoy the other too 😊 Thanks for watching 🙏🏼

Nice neat work Andy, - It's a pleasure to be the first person to work on a lovely new solid wood door like that, not having to circumnavigate old holes and other people's mess-up's... - I actually just did 5 mortice sash-locks today, all for one customer, - only one of them was a fresh install, but I was still gutted I didn't have a morticer jig to use on it. Got to gets me the Souber kit, I'm thinking. - It's not a lot of money and once you've used it once or twice, it's a justified purchase... These 49-ers are becoming 59-ers more often than not around here. must be so much better for that extra tenner... - I know everybody loves a bargain, but why do people still think that they are going to get away with calling a locksmith, at god knows what time of day, and only pay a £39/£49/£59 bill? - I thought the consumer was supposed to be savvy nowadays, - I wish they were in our industry. (Blood boiling again... but rant over, this feels like a safe place.) - Keep up the great content Andy 💪

@brighton_locksmith

2 жыл бұрын

Thanks George. Yes you must get yourself the Souber Jig. It might take a couple of uses before you get to grips with it but once you do it’s well worth using mate. Yeah I wish there was a way of alerting the consumer of the scammers! And like you say, can they really believe it’ll cost that little?? 🤷🏻‍♂️

Nice one 😀

@brighton_locksmith

2 жыл бұрын

Thanks mate 😊

I've said it before and I'll say it again "I love my mortice jig". The four bits for mine start out at 18.5mm and go up to 25mm. I am feeling inspired to pick up a 30mm cutting bit myself after watching this. Andy you are the kind of tradesman that puts faith back into ther public. My daughter has just been done over badly by a dodgy plumber. She asked if there are any honest tradesmen out there. I told her absolutely there are, I was thinking of you buddy. I am going to point her to your channel to restore her faith 😉.

@brighton_locksmith

2 жыл бұрын

Aww bless you Roy, Thank You. That’s very kind words. I haven’t even checked to see if you can get a 30mm cutter yet 😂 I’ll keep you posted 😊 Thanks again for your lovely words Roy 🙏🏼

Great video, Paul souber. Makes some great tools, Just wanted to tell you when you chop in mortise locks right we’re the middle rail Your chopping away the dowels or tenon. That holds that rail into the door stile. Play it safe. And off set it in future….

@brighton_locksmith

2 жыл бұрын

Yeah thanks buddy. I am aware of that. I possibly could of gone a little lower or higher in hindsight 😐

Another great video nice work with the mortice jig thanks andy😊😊

@brighton_locksmith

2 жыл бұрын

Thanks mate, and thanks as always for watching 🙏🏼

What a lovely job Andy,well done mate.👌🏼

@brighton_locksmith

2 жыл бұрын

Thanks as always Murchie 😊😊

Great stuff as always Andy 👏

@brighton_locksmith

2 жыл бұрын

Thank you kind sir, and thanks as always for watching 😊

Nice work. The same type of 'locksmith' scammers are very present and very expensive in Canada and USA as well.

@brighton_locksmith

2 жыл бұрын

I know mate!! They are everywhere!! Hate them all 😡 Thanks for watching as always Gumby 👍🏼

@ImGumbyDangit

2 жыл бұрын

@@brighton_locksmith 839 - Getting closer

@brighton_locksmith

2 жыл бұрын

@@ImGumbyDangit I know buddy. But only just over a month to hit my target😬

Nice job mate as per👍

@brighton_locksmith

2 жыл бұрын

Thanks Steve. Hope you are well buddy and keeping busy?

Hi you used the-off set rail,you just set it of centre set by the outside lines then reset to the opposite side,smaller bits use less pressure and give a cleaner finish

@brighton_locksmith

2 жыл бұрын

Ah I see!! I did think about doing the to be honest but wanted to see if there was a 30mm bit for it first!! Cheers buddy 👍🏼

Leeds eh call in for a brew you can show me some tips 🤣 hate 49ers man there awful! Might check out that group as long as they don't bully the new lad 😉🤣 another good video mate hope you feel better soon 👏

@OvermindAlpha

2 жыл бұрын

LS locksmith 49ers are operating there

@fortifiedlocksmithswakefield

2 жыл бұрын

@@OvermindAlpha there everywhere 🤣

@OvermindAlpha

2 жыл бұрын

@@fortifiedlocksmithswakefield I meant, LS Locksmith is the name of their company, so if you somehow have the means to do something about it, feel free

@fortifiedlocksmithswakefield

2 жыл бұрын

Not sure I have the power 💪

@brighton_locksmith

2 жыл бұрын

Hobbo, I did t realise you are in Leeds. Yeah my step daughter is in Leeds Uni. We stay in Headingley 😊 Join the group mate. It’s the best Facebook Locksmith Group there is 👍🏼

The £49’er absolutely butchered that Yale cylinder

@brighton_locksmith

2 жыл бұрын

Indeed they did mate 😢

Bloody 49'ers! Have you tried to hang a bag of your jig to catch the wood chips? 🤔👍👏

@brighton_locksmith

2 жыл бұрын

Wow!! Now that’s a n idea 👍🏼💡 Thanks for watching

Think I've got a 32mm for metal doors cost bout £20 pounds

@brighton_locksmith

Жыл бұрын

Yeah I have a few more on board now 😀

I love this type of hardware. I wish we used it here in the U.S. . Thanks for the video . The jog is awesome. Is it meant to be used with a drill or a router?

@brighton_locksmith

2 жыл бұрын

Thanks buddy. Yes it’s designed for a drill! You can get away with using a cordless drill but it’s advised to use with a corded drill 👍🏼 Thanks for watching 🙏🏼

Just a question what happens if you accidentally pushed the snip down on a night latch how do you open it from the outside.

@brighton_locksmith

2 жыл бұрын

I would use a letter box tool if the door had a letter box. If it didn’t the lock would have to be Micky Moused open. Unless it’s an outward opening door…….Sometimes you can get lucky and air wedge it 👍🏼

@lambertomidolini8027

2 жыл бұрын

Okay you Mickey Mouse it drill two holes either side to get to the screws, But the body of the lock is expose now even if you put a screwdriver in there it would not turn because it’s deadlocked.

@brighton_locksmith

2 жыл бұрын

@@lambertomidolini8027 that’s correct. So you then drill another hole through the back plate of the lock to expose the snib. The easiest way to do this is to buy Gav’s Snib Mouse Tool from Abby Locks and Security online shop here: www.abbeylocks.co.uk/store/ Enter the code Lockswood10 for 10% off You can buy from the store as long as you are a trading Locksmith or locksporter.

@lambertomidolini8027

2 жыл бұрын

Thanks for the reply, I haven’t seen many as we use 001 Lockwood just pick the rim cylinder and you’re in.

Not a criticism, but you should never install a mortice lock in the mid rail of a wooden door, it can destroy the tenon & weaken the door

@brighton_locksmith

2 жыл бұрын

Thanks Daz. This is an engineered veneered door so it doesn’t matter where the lock goes as there are no mortice or tenons. I am aware that if the door was a traditional solid wooden door that you should start away as much as possible from the mortise and tenons. Thanks for watching buddy 😊🙏🏼

@jamesmacdonald5881

Жыл бұрын

If the door has been made correctly middle rail should have a twin mortice and tenon with enough space for lock to fit in between.

Where to get the SOUBER 30mm bit

Mate class video yet again better than porn, Im new to locksmithing but constantly learning.

@brighton_locksmith

2 жыл бұрын

Hahaha maybe I should do this on an Only Fans page and get paid for it 😂😂 Glad you’re enjoying the videos mate 👍🏼