Massive School Boy Error by me. Apologies... I've updated accordingly and given myself a talking to about taping up your wheels if you go on Sand! It's actually not to bad once the diffs are sorted! shop.makerfire.com/collections/1-10-scale/products/wltoys-104019-1-10-2-4g-4wd-55km-h-brushless-high-speed-racing-car?aff=286

@FarmerFpv

Жыл бұрын

You should punch holes in the top of the tires so the sand and water escape when driving. I do it to all my RCs with a leather punch. If the tires are already glued on using a brass tube in a drill and sharpen it by running an Exacto blade inside it then drill holes in the tire. I put 4 holes most people put just 2 holes. Rich Duperdash has a good video on how to do it with a brass tube.

@LGHTSPD675

Жыл бұрын

Tomley, I've bought 3 different WLToy RC Cars due to your videos. They are great value. But could still be some bizarre initial build quality or adjustment issues on this one, really twitchy handling has many culprits. It would be interesting to see the wheel alignment measurements. A little toe in at the rear and a smidge of toe out at the front can help straight-line stability for off road soft tire and suspended vehicles. Also a little negative camber on the rear helps as the travel on a-arm suspension changes the camber naturally over the stroke from fully compressed to full drop out (and vis-versa), crossing over the tire center line while the wheel is slipping/spinning changes the way the tire pushes on the vehicle. That tire hop and differential lumpyness was a great observation, i couldnt tell if it totally fixed the issue or not. Keep us posted if you continue working it through it. Always appreciate honest reviews, something seemed wrong and you are helping us figure out.

@muhammadrifqi8024

Жыл бұрын

can you review the rc zd racing mx 07?

@JohnRobinsonRC

Жыл бұрын

HUGE thanks to you Phil. I just received my review copy and both diffs are locked. I never watch someone else's video before reviewing my own but your title was so cryptic and I am glad i did. What a pain they are to open though to get to the diffs! 🙄😳 But seriously. Thanks for the tip! have a lovely evening. 😊👌👍🏼

@TomleyRC

Жыл бұрын

@@JohnRobinsonRC I'm glad you watched. It should means you'll have a better experience than me! I'll look out for your video... and yes, they are a right pain to access!

It's a testament to your integrity to admit mistakes, good man!

This just shows your ethics, Phil! Thanks a bunch and kudos!!! Fantastic review as always! 😊 Stay safe there with your family! 🖖😊

Yet again Phil you show your ethics as a good person. Watching this again with the new cut. Love bounce montage. Miss the lil blue truck soundclip.

@TomleyRC

Жыл бұрын

Yes, once I’d removed the sand, the difference was so much that I couldn’t leave the original video without mentioning it. So decided to do a quick re edit. (Well.. 2hrs or so isn’t all that quick lol)

This is why I love this channel! Who else admits thier mess up and shows fixing it! Love honest reviews and this is were it's at! He actually reads his comments! So awesome! Thanks

@TomleyRC

Жыл бұрын

Thanks dude. I can't always reply to them all... but I certainly look at them

@oneforall549

Жыл бұрын

@@TomleyRC see prefect example! Your Killing it dude!

@klippschliefer4968

Жыл бұрын

The RC saylors done it before. They admited a mistake too, and except from Spectrum stuff, they review 100% honest.

Just got my WLtoys 104018 (Same as 104019 except different body) and can confirm the diffs are still an issue. I ended up designing and 3d printing a 1mm spacer for the diff housing so I could leave the little washers in. They also lacked grease on the inside and absolutely zero grease on the outside. Finally got to take her for a rip after I sorted out the diffs and greased them up. It's quite a good little 1/12 monster truck. Thanks for mentioning the diff issue!

Great stuff, I really admire your honesty, that is quite literally your best character trait, well done once again on an excellent preview, review!!!

@TomleyRC

Жыл бұрын

Thank you. As well as giving fair reviews for you guys, I also like to be fair to the manufacturers as well.

Babe, wake up. Phil uploaded twice in one day.

Thank you Phil I reckon this could be our upgrades from the hbx16889

Djeezes those wltoys cars are getting seriously good

Wow, one of the very few KZreadrs who cares about his viewers by actually reading their comments, this is what will make our community of RC enthusiasts flourish!!!

Thanks for the your correction and honesty. We all make mistakes. If the tires still tend to wobble to some degree I would mention one thing to consider. I bought an Arrma Infraction Mega and the rear wheels wobbled a lot. When I move the rear tires to the front they did not. I found that the rear axles in the wheels were not straight. You could hardly tell by looking at them, but once they were changed it made a huge difference.

@TomleyRC

Жыл бұрын

Cheers Michael. When I tested it with once removing the sand, it was like a night & day difference. I was not happy to leave the original video up as it was not really fair

Really cool shots on the beach!

😍🥰👍👍👍 wow, Phil!!!!!) Lightning faith calibration 😀🤭🤫👍

Impressed mate that you have made the decision to remove and apologise. Many channels would not so well done. Wishing you a lovely evening.

This is the way the go. Respect. 🙂

@TomleyRC

Жыл бұрын

🙏

That's definitely why you always want to seal the wheels and vent the tires. Sand can't get stuck in them and get them unbalanced. Also stops water from getting stuck in and ruining the foams. Got a video on my channel that shows how to do it :-)

It makes you a better man admitting when you’re wrong. My compliments to you💪🏻👊🏻

Oooh, thanks for that. Gonna check my 1/8 truggy tyres for sand as they wobble all over the place. Great video. Looking for something for my little one, this could be the one

@TomleyRC

Жыл бұрын

Yes, big thanks to the comment section for pointing out my mistake!

some great footage here ...love the beach stuff. Great reviews man ..thanks

@TomleyRC

Жыл бұрын

Thanks Rich

A very interesting car. Above all, I am very jealous of this great beach, which makes this work even more fun! 👍 Awesome and funny video, thanks! 😃

Everyday is a school day. Quite impressive then, apart from the diff issue 👏 👍

@TomleyRC

Жыл бұрын

Yes, made a big difference!

Oh uh 1612 here in Arkansas USA!! Afternoon Tomley! Thanks for the vid e o!

You made it much better doing the work on those diffs

@TomleyRC

Жыл бұрын

Yes, huge difference!

Hey mate .. this updated vid is more fair on this little rc .👍🏼 I had trouble initially on mine first few minutes. After that it opened up and drove fine ! Still keep up the good work Phil 👍🏼👍🏼

You naughty boy, you, lol. Excellent video, Phil.

HI PHIL SIR THIS IS WHY WE ♥️ YOU'RE CHANEL. THANKYOU FOR POSTING A TRULY HONEST VIDEO SIR.🇬🇧🕊️👍🏼

@TomleyRC

Жыл бұрын

Thanks Mike. I like to give fair reviews for not just the viewers, but the manufacturers as well 👍

@mikebird8290

Жыл бұрын

@@TomleyRC GREAT MAN, I SALUTE YOU SIR 🇬🇧🕊️✌🏼

Double upload is always nice even if it’s kinda the same video 😝 great to see you figured it out.your absolutely correct about the diffs and it’s actually common with a lot of cheaper rc’s where theirs either no diff fluid,mold defect,and some just cranked down too tight.

@Rcjamaica876

Жыл бұрын

Ok so when I purchase all I hve to do is take apart and check diff right??

hello, I just want to say thank you for your videos, and today the hyper go 16209 arrived.... it's a little beast!!!! (I got hooked on her in your video) just thank you!!! keep doing what you do cause you do it so nice. 👍

RC Expats Hong Kong did a review a Couple days ago and also said it didnt steer very well and also broke the cvd. I dont know about this one. I want to love it but im torn LOL. We have the brushed version and absolutely love it. My daughter named it Dr. Danger LOL

@MangoJim90

Жыл бұрын

👍🤭🥳🙌

@TomleyRC

Жыл бұрын

Yes, the brushed is really good. Might be worth waiting to see if the update it with stronger CVDs and sort the diffs

I see this as further confirmation of your honest reviews ;)

The old thinner CVD joints in the 124019 yes they where thinner but much much higher quality, I run a 540 absima 8.5t with 3s (80mph) and never yet broke a standard CVD

That’s probably what was causing your runtime to be only 6 min too! Good job figuring this one out Phil!👍🏻👊🏼😃

U honest bastard! Thanks for the info and great vid, as usual! U rock, mate!

Hello keep up the good videos that have helped me and my people. Does this new wltoys 104019 have a control delay? Or in other words if there is a delay in the accelerator like for example the wltoys 124017 v2?

Looks like a nice rc

I do not quite understand the brico that you have made to correct the deviation in line of the differentials. Add a washer or remove a washer to prevent sprockets from skipping? Thanks for your videos.

Better to see 2 times ,is no much really to see on KZread been boring lately just waiting for new videos,but yes not perfect wltoys but little work makes little smile on your face.i not got any bad to say to my wltoys,got my 12423 for 4 years and still all stock electronic,and is working fine happy days

@TomleyRC

Жыл бұрын

It has certainly been a bit quiet recently. Hopefully it’ll pick back up

Very well done ! Thanks does any rc car have perfectly balanced wheels/tires…nope. Very rare if they do.

I got one of the brushed ones. Less than 7 days of owning it and the rear diff sounds like its eating itself. I only used it on grass and bought it because of a few tubers saying its a good starter car so I was pretty pissed. Supplier is saying they are replacing it but I have been waiting for a replacement now for longer than I owned the bloody thing. Including the time it took to ship to me originally. it simply shouldn't have happened to start with so WLToys haven't got a great name in my books atm.

Bounce montage deserved a like xD

Good job 👍

always respect a man who's ready to call himself out. Great vid chap, looks fun. You reckon this one or the 144010 as a basher?

Good job 👏

Thanks for the updated vid Phil 👍. I'll bet the battery life is considerably extended now you've sorted out those diffs too? The ESC and motor must have been working overtime overcoming all that additional friction.

@TomleyRC

Жыл бұрын

Yes, I expect it will be better. I'm so glad it was just the diffs :)

Im thinking to buy a vorteks but i dont know if these one is better😅

Battery don't last long cuz it's brushless taking a lot power

Thanks so much. Much better!

I converted a brushed version to brushless,I keep snapping the right cvd,I broke 3 of them so they need to get that sorted out

That's why you should tape the holes on the tires

What thing do you use to hold stuff when you solder

Everyone makes mistakes, you corrected it and retested so no harm done.

Thanks for the updated video. A query unrelated to RC, what beach did you visit? I know I don’t live far from you and it looks really nice.

@TomleyRC

Жыл бұрын

Mablethorpe 👍

Is this better or the bezgar hm101?

Hello, I just bought the wltoys 104018 model. Is there any part I need to lubricate? Should I do running-in for the battery? If I want to buy a second battery, what is the highest mah battery that is suitable?

i see you're gettin' a speed run in before getting a speed run in at the Fitness club. =oP

Is there any CVD upgrade for the 104019? It breaks...

Good on you for admitting the mistake and changing your vid. To err is to be human.

@TomleyRC

Жыл бұрын

Yeah… when I removed the sand it was too much of a difference to ignore.

How did sand get into the wheels if they're supposed to be glued and sealed off?

can you review the rc zd racing mx 07?

What excatly did you do to the diff please??

If wltoys makes a 10th scale short course truck that runs like that, I'll be the first, and second, and third in line to buy one.

I wouldn't say you messed up it shouldn't come like that. That's entirely there fault. imo Appreciate ya showing these things. Looked like it ripped pretty well once the issue was worked out. 👍🏻

hi phil got one myself today diffs still poo ive taken one washer out so far see how it goes

Your a good man for admitting being wrong. Made a huge difference after. It’s funny because I’ve had expensive RC’s where right from the start had loose pinions,no shock oil, loose wheel nuts,drive shaft pins fall right out etc. etc. So it’s even more aggravating when you pay so much & have to wrench on it & like you said how many people have the time or skill to wrench on it. A good example is my Losi Lasernut I absolutely love it but it breaks or shall I say falls apart all the time & I keep having to buy parts. It’s been down & just got a new pinion & gear because the pinion came loose for the lost count time & ruined both the pinion & the gear was bent. I also got a set of center dog bones because the pins on the end keep falling out. It’s becoming a money pit. But hopefully after these new parts it’ll be up & running. I’m pretty gentle with mine I see people bashing them & I’m like ok did I just get a bad one because mine would fall apart. Oh ya & the rear rod ends keep breaking 🤨

@TomleyRC

Жыл бұрын

Yes, I get a lot of comments saying this is ‘cheap junk’ etc… when I have also had expensive stuff that has issues straight out the box. That’s why it’s important to have a little hand on experience with this stuff

@legomotorsytmk230

Жыл бұрын

lemme guess it was a losi dbxle 2.0

98.5k subs. Time for a comp to get to 100k!

@TomleyRC

Жыл бұрын

Nope.. I’m done with Comps. To much hassle 😎

Very nice little budget truck also me likey bouncey 😆

What size 3s did you use

Phil can you post a link for those paddle tires? I want to get this model & add those tires i live across from beach, thanks mate 😉👍🏽💯

@TomleyRC

Жыл бұрын

Of course :) s.click.aliexpress.com/e/_DDvBUQJ

Tell me, does this model have a delay when you press the gas?

Can crystal and controller be change

Where did you get those paddles!?!?!? Great update!!!

@TomleyRC

Жыл бұрын

Aliexpress.

Mine wont go well full throttle in a straight line, it swops ends rapidly!! It came with the front wheels toed out a bit What can I try please

Hi guys sorry for the late comment 😅 but can anyone tell me how do you loosen up the diffs? Kinda new to this. Anything helps!

"Its got more girth" Perfect that's what she said opportunity missed not once but twice!

Can it safely run 3s out of box

fair enough, vents in rims can take in water dirt or sand pretty quick.

EVERYONE KNOWS your legit. Not at all surprised if something wasn't the best/accurate content it would be fixed. I was tired, just home from work. Do not recall anything out of line. A prop balancer for R/C planes and some home made adapters for various tires and rims. I would imagine there's a better way. The rims on this truck are good looking.

you should review the 104016

Hey man~ can you make a simple bashing video of this with new wheels? I feel like this one actually has a lot more potential but with a few fix. This feels like a kit for the intermediate peeps who wants something cheap that they can ticker with

There is a great chassis brace available on Aliexpress for this a the whole series 124002a-10

"dont wanna be pulling things apart" oh god no - noone wants to do that! *glances sideways*

@TomleyRC

Жыл бұрын

🤣🤣

so in summary u don't recommend this rc to do well right out of the box ?

The brushless Wltoys 1/12th and 1/14th cars will need the "metal upgrade" center shaft and at least the rear diff upgraded. The upgrade parts appear to have solid bronze gears vs the original sintered metal parts. Also, a set of LC Racing CVD's wouldn't not be a bad idea. The originals are spaghetti. They bend easily.

@TomleyRC

Жыл бұрын

Yes, a few of the LC Racing parts fit straight on 👌

By that lamp post look like you was on two wheels

@TomleyRC

Жыл бұрын

Yeah… so so close!

Guess I’ll check my wheels for sand now.

Honesty goes a long way

@gbraadnl

Жыл бұрын

I actually wondered: Beach first didn't seem like a good idea. Glad this partially got sorted

@TomleyRC

Жыл бұрын

Yes… it make sense that sand would have got in… but I’ve ran so many cars on that beach and never had this issue. At least I’ll remember for next time!

@gbraadnl

Жыл бұрын

@@TomleyRC While most of the wheels are glued the venting hole might be bigger. Without foam this can collect sand. My cars immediately showed signs of wear off ceased up on the steering because it collected sand around the servo (12428). Many things can contribute to this behavior. Nonetheless, great to see you come back to this so quickly!

Question, could you make a video comparing Adventure Force RCs to WLToys RCs? It'd be really interesting to see just how bad Adventure Force's copying of hobby grade designs are in comparison to something that has much more substance to it

Yeehaw

A great place two take a cheap basher the beach .

I tip my hat to you good sir

I hope wltoys see this video n make improvment.

3660 is the same size as Arrma 3s line. Lots of Power for the SIZE

The diffs are the same as the 104001's.

#respect

Did you get a strongly worded email from wltoys saying "please help us out here Phil" only joking, nice honest re-review 👍

@TomleyRC

Жыл бұрын

Haha.. well considering I released the original video at 13:00 today, and within the first 2hrs a few comments suggested Sand in the tyres. So at about 15:00 I removed the sand, charged a battery, grabbed my GoPro… shot some footage, re-edited the original video and uploaded it. WLToys are probably still asleep 😅

I also got to remember it's a low quality battery it might not be right on a capacity

Very nice video mate you should not go on sand it mess it all not

Whhhhaaaaaaaaattttttt!!!

We forgive you, don’t let it happen again! 😏😁