Sony FX6 Remote Control & Liveview APP (CBM & M&C)
Фильм және анимация
How to connect the FX6 to the Sony Content Browser Mobile app. The registration and use of the new app „Monitor & Ctrl“ works the same way. It's not that easy, but once you've done it, the app offers amazingly extensive functions. All camera settings can be adjusted, but you can also pull focus or use touch to focus, for example. The video quality of the livevew is not particularly high-resolution and pulling focus is a bit rough, but the app saves me when using the camera on a crane, for example.
Instagram: deadendboredom?...
Discord: / discord
Пікірлер: 62
Just wanted to thank you for your assistance with setting up this app with my FX6.
Thank you!!! I have been searching for this everywhere!
Thank you for the explanation, this worked for me.
You make really good content
thanks for sharing! Very useful!
Well done 👍
Is it just me or is there no way to set the camera date/time using the CBM app? This feature is so helpful when using the FX3 and other Alpha cameras as it syncs the time for all of them.
Love your videos! Question: So, however I choose to setup(compose) my shot through the app, that same composition is automatically applied to that shot via the Sony camera...including the focus and picture profile?
@deadendboredom
Жыл бұрын
Thank you very much and this is a very interesting question. The image section of what the camera sees and records is identical to the image section you see in the app. The colors in the app are independent of the recording in the camera, whether you get a view Lut displayed there or not, depends on whether you have activated „MLUT“ on page 5 in the quick menu or not. The focus you set in the app is of course identical to that of the camera, but you won’t really be able to estimate the sharpness in the app because the resolution is too low for that. You can change much of the camera settings in the app, but by far not all of them. In particular, you will find settings that you would like to change more often during the shoot, such as iso, Iris, ND and focus, but special settings such as the choice of the codec or HDMI output settings you have to make in the cameras menu.
@1ladylane
Жыл бұрын
@@deadendboredom Thank you so much for the clarification. God Bless! :)
Thank you for the good explanation, only one thing I'm missing in het app and that is CAMERACONTROL 2 , in my app only CAMERACONTROL, ASSIGN and PLAYBACK appears.
@deadendboredom
Жыл бұрын
Unfortunately, I don’t have a solution for you. I just checked again and have not found an option to design the menu items myself or the like. I can’t think of more than saying that you may not have the latest version installed right now. I have installed the app on several devices (Tablet & Phone) and cameracontrol 2 Is available everywhere. However, they are all iOS devices, how it looks on Android, I don’t know.
Update: Sony has released a new app called "Monitor & Control" (M&C). Currently, it includes the same options and display quality, and the "old" app continues to function. The login process remains the same.
@samluo7369
10 ай бұрын
Please tell me it can work on firmware 4.0
@deadendboredom
10 ай бұрын
@@samluo7369 Yes! This tutorial still works the same with firmware 4.0 - with the new app and the old one.
My APP does not connect with my FX6. I dont know why. But is the newer app. Good video!
@deadendboredom
10 ай бұрын
Are you already on firmware 4.00? Is the WiFi activated in the FX6, Can you already see the WLAN of the FX6 on your mobile phone or tablet?
@thomaskistler4274
10 ай бұрын
thanks für answwering so fast@@deadendboredom :-) I do not have the latest firmware installed yet. I have to check the version. Otherwise i did every step on the video. Thanks i could be the solution. I will check the firmware. Yes i see the wlan on the mobile phone.
@deadendboredom
10 ай бұрын
@@thomaskistler4274 Supposedly, the new M&C App works from firmware version 3.00 onwards, but having version 4.00 can't hurt. If you can see the Wi-Fi, that's already a good sign. My next question would be at which point it exactly fails. The biggest challenge during setup is that there are two sets of passwords and names. One set is for connecting to the Wi-Fi, and the second set is for accessing the camera.
@thomaskistler4274
10 ай бұрын
@@deadendboredom thank you so much, it was the problem. I was running an old firm ware and after updating it works. Very nice and thanks a lot!!! :-)
@deadendboredom
10 ай бұрын
@thomaskistler4274 I’m glad to hear that and good luck! Grüße gehen raus ;)
Can you control it over a network? Mostly control iris in another room from the camera.
@deadendboredom
Жыл бұрын
To my knowledge, there is no web interface like with the FR7. But what you can do: connect the camera to your normal WLAN router and then control the camera with a tablet or smartphone and the app via your WLAN network. For this, don‘t select „Access Point Mode“ in the settings, but „Station Mode“. Then connect the Camera to your network in „ST Mode Settings“ and enter the password and then the communication runs over the network and not directly between the camera and tablet.
I have a question. After connecting the camera with the application I get the following message: "The connected device can't stream to this app for some reasons." Could you help me with this? Thank you so much
@deadendboredom
Ай бұрын
I haven't seen that message before. First, I would check the basics: camera firmware? Which app are you using? (CBM or M&C?)
can you connect multiple FX6s and monitor them side by side over the app?
@deadendboredom
Ай бұрын
Not that I know Update: Perhaps… There's a new multicam switch in the app. I assume it only works if all devices are connected to a router. I'll have to test that out sometime.
What firmware do I need on y FX 6 to get this to work?
@deadendboredom
Жыл бұрын
Firmware 3.00
I am trying to do this and I do not have the setup for mobile app this what am I missing
@deadendboredom
3 ай бұрын
My first assumption would be that the camera has an older firmware version and that an update is necessary to unlock this feature.
How much distance it will come
@deadendboredom
Жыл бұрын
Basically as far as the WLAN range is from the tablet and camera. After 10m and through a wall it still goes, from there it becomes more unreliable. It is not comparable to a professional Videotransmitter, but I find it surprising how far and how well it works.
I'm stuck at 0.55. There's no sign of the camera in my iphone. A 6s, maybe that's why?
@deadendboredom
Жыл бұрын
The app should actually work from iOS 14 and the 6s should be theoretically compatible with iOS 15. Are you sure that the wifi of the camera is active?
Does this work with FX30 Fx3 A7IV?
@deadendboredom
Жыл бұрын
No, there is the „Imaging Edge“ app for these cameras, which supports less/more and other functions.
@nyambe
Жыл бұрын
@@deadendboredom Thanks, would love to control it from my laptop
My CBM cannot monitoring when the camera set 24p,do you have this problem?
@deadendboredom
Жыл бұрын
That's very interesting! I just tested it, and at 24p, I actually encounter the exact same issue. Interestingly, it works flawlessly at 23.98. One thing I noticed is that at 24p, we can't change the recording resolution and are limited to 4096x2160, while in other framerates, we can adjust the resolution. I can imagine that might be the reason behind the problem. Let's wait for the upcoming firmware update.
@bearland7541
Жыл бұрын
@@deadendboredom thanks
@lukastemberger
10 ай бұрын
They released a firmware update and even a new app - Monitor & Control, but it still doesn't work with 24fps :-/ Strange
@bearland7541
10 ай бұрын
@@lukastemberger I realize that too, and the image quality is the same, feel like nothing improve right now,maybe Sony will upgrade in the future
@deadendboredom
10 ай бұрын
@@lukastemberger Thank you for the tip! Interestingly, the old app also continues to work.
Im stuck at trying to connect to the camera through the app. It keeps saying wrong password. I even reset the network settings, tried a different device and set my own passcode. Cant get anything to work. Any tips ?
@deadendboredom
Жыл бұрын
There are two different passwords: the first thing you need is the WLAN password to join the camera’s WLAN. The second password is the one you need together with the user name to log in to the camera after you are connected to the WLAN. The WLAN password can be found under >Network >AP Mode Settings >SSID & Password. The password to log in can be found at >Network >Setup for Mobile App >Setup I hope that can solve the problem
Doesn't seem to have a preview of the audio levels which is the whole reason i got the app :L come on Sony!
But how do I tether it
@deadendboredom
7 ай бұрын
What exactly do you mean by that? There is a way to „tether“ the data via an FTP server, but this seems to be complicated and of course requires a server. I only found a tutorial for the FX9 here, but that should work the same way with the FX6. kzread.info/dash/bejne/p592utuBhc-fZJs.htmlsi=ccZuO9hEwTgU1UtL
does anyone know how to stream from a Sony fx9 if that's even possible lol?
@deadendboredom
Жыл бұрын
What kind of „stream“ do you mean, RTMP directly from the camera to KZread etc., or stream to the tablet similar to this video with the FX6?
Setup up for mobile app is greyed out. I swear everytime I watch a tutorial the damn setting I need is greyed out.
@deadendboredom
Жыл бұрын
When I encountered the problem, it was because the camera was still on firmware version 2.0. Are you already on firmware 3.0?
My FX6 DOSENT SHOW SET UP MOBILE
@deadendboredom
Жыл бұрын
Do you have the latest firmware 3.00 ?
@EscapeThe9
Жыл бұрын
No
@deadendboredom
Жыл бұрын
@@EscapeThe9 That should be the solution to the mystery
What an overwhelmingly unnecessary procedure to connect ;-/
@deadendboredom
Жыл бұрын
Yes - as soon as it is set up, however, it is very quick to connect to it again, even after the camera was off. On the whole, it’s a bit like connecting a computer to the wireless network... You do that once and not again afterwards.