This is so satisfying to watch. Not being a guitar repair person but guitar, lover, and player. I get lost in all the things that you do wondering what it is that you’re doing. No matter, I am mesmerized. Like others have said, it’s so therapeutic. Go figure. Thank you for everything you do to keep people playing their guitars. Stay safe.

@williamsporing1500

5 ай бұрын

She does great work!

Great work..the repair..the filming….thecamera work…the editing. Thank you so much.

Amazing work! We need to see you play the guitars after you fix them! It'll make the video even more entertaining!

@danielktdoranie

Жыл бұрын

THIS!

@nicksnisar4135

Жыл бұрын

Погоджуюсь на 100%

@julianandres8712

11 ай бұрын

Yes !

@zachfrank7394

9 ай бұрын

You know Leo fender couldn't play guitar right?

@jackyboygee777

8 ай бұрын

I agree that Tanya needs to show a full setup, and actually let us see and hear the results.

Watching Tanya's videos and work is such a therapeutic experience, and congratulations on your rapidly increasing subscriber base, it's testament to the quality and pride you put into all your work!

7:08 I like the way you modified the super glue nozzle! 😆👍

Sorcery! The fix on that crack! You performed magic! It definitely looks tricky dealing with acoustics.

@TanyaShpachuk

Жыл бұрын

thank you!:)

Brilliant job and setup, Tanya. Thank you !

You did excellent work repairing this Martin ✌❤

That ebony finferboard is just gorgeous

@bluescreekguitars3346

4 күн бұрын

that ebony may have been dyed , Martin used to use Feibing leather dye to make them black. enjoy watching your work

@peterdefrankrijker

4 күн бұрын

I came here to say this, only to discover that I already said it six months ago. Well, at least I’m consistent.

!!!! ATTENTION !!!! We have a huge YT scam activity, so I remind you again - I do not hold any giveaways or contests, moreover, I do not have a public telegram channel, if someone try to contact with you like this - block them! Be careful and don't fall for such scams.

I can’t even imagine.I have a 98’ D28 I bought new on 01-08-1998.It’s like one of my children.I can’t even IMAGINE!

That’s a beautiful Martin. Wish I could have heard it sing. Great work on the repair.

As an aspiring luthier, I absolutely love watching your videos!

Good job Tanya, love watching you work. I hope all is well over there… 🙏❤️🙏

I love these videos so much. So relaxing to watch these and very inspiring aswell!

Love how your work speaks for itself. Great job

@Bflatest

Жыл бұрын

I was wishing she did voice over after because I listen to videos as I work and watch a lil too.

@xXVintersorgXx

Жыл бұрын

@@Bflatest there's always twoodfrd if you want narration.

Congratulations Tanya!!!!!. ❤

Great idea with the pipette - brilliant

i like your woek because you dont talk you do the job very well keep it on & thanks.

Just discovered your channel - this is the most enjoyable and relaxing content to watch - inspiring !!!

Fantastic job!

therapeutic videos. Thanks Tanya ❤

It's amazing how quickly you managed to build a channel! Congrats from a long time follower 😊

A bigger crack just means more gluing surface to make a better repair! Great job tanya.

Fascinating to watch, but also enjoy the foot notes as well. It helps with the details.

I really enjoy watching you work your talent is top-notch, thank you for all the videos you do

@TanyaShpachuk

Жыл бұрын

Thank you so much!

Beautiful work, can't wait for the next video

@TanyaShpachuk

Жыл бұрын

Thank you, so much💙

I love watching your videos (-: I'm trying to absorb your technique, and the products, and tools you use to get beautiful frets, and fretboard. I have a few refret projects, and I want to make sure I get them done right. Keep up the great work! Have a great day/night! ✌️🤘👍🎸

Well done, you fixed that split.

From a Martin employee, great work!

This is so relaxing! Nice job.

What a pro!

Amazing work! A joy to watch…..I just wish they were a little longer. 😬🙏🏻

Amazing work! I hope you are staying safe!

A master luthier at work, very cool!

The thing that shocked me the most wasn't that the crack opened, it was the damage the bolt threads did to the side during the repair clamping. There were many ways they could have been protected!

@OhHeyFergy

6 ай бұрын

It looks like that was just glue residue that she wiped away.

@tonyd2764

6 ай бұрын

@@OhHeyFergy not convinced, even so, the threads on those clamp bars were precariously close to an unprotected finish. The fretboard gets taped but the sides don't? Hmm...

@MM-vs5ej

3 ай бұрын

@@tonyd2764 "not convinced" lol She literally wiped the glue residue away with a rag, and you're complaining?

@tonyd2764

3 ай бұрын

​@@MM-vs5ejnope

great video - cool little trick for making the CA glue tube thinner

Good as new! Very impressive.

Très beau travaille , et très belle dextéritée . J'appréçies beaucoup le cté Zen de chaque vidéos .Merci beaucoup.

That's an acoustic resonance soundhole pickup in that little guy. We call them acoustic expander pickups here in my shop. Not many players know what they are, but they are the next gen of the Tonewood Amp. . I sell a ton of them in my shop, but only after players try it in our demo guitar. They are very cool.

Such expert and loving care for that instrument. I wish I could have you care for my guitars too

That was a really neat trick with the lighter, to reduce the diameter of the pipette tip.

To fix it you had to break it, awesome work!!

This is probably the only KZread channel that I subscribe to that I’ve seen all of its videos. 😉 Keep up the good work, young lady. Be safe and God bless!

@TanyaShpachuk

Жыл бұрын

Thank you!🙏🏻

@robarnold6998

Жыл бұрын

@@TanyaShpachuk you’re welcome!

thank you for shearing this great video

You learned very well, Grasshopper.

Splendidly done... ✌️❤️😊

Good morning, beautiful, that lp that you renovated a while ago, it was wonderful

wow, an excellent job!!! ❤❤❤❤

👍 Tanya I love to watch you work, I sure would like to hear you play.

Gostei dessa ideia de sargento,top e parabéns pelo trabalho

Great Art and skill 🙏

I love guitar work anyway, but the ASMR way of filming is amazing!

That was awesome!! I would’ve been pulling my hair out after the split!! Beautiful work

@TanyaShpachuk

Жыл бұрын

Thank you!

@Stratsrule

Жыл бұрын

@@TanyaShpachuk I live in USA. I work on my personal guitars on easy issues. I have an acoustic that the string height at 12 feet is super high. My neck is straight. What should my strings measure at 12th fret? If u don’t mind me asking ? Ty

@GrB-M

Жыл бұрын

@@Stratsruleyour guitar almost certainly needs a neck reset. That’s a job for a professional, unless it’s a Taylor or something else with a bolt-on neck. This isn’t a cheap job, it’ll be at least $250. At very, very least. Whatever you do at least pay someone to check it out to make sure this isn’t going to create structural damage over time. The neck should be parallel to the topsheet but over time the strings pull it up at the nut, increasing its angle to the topsheet. Which can push the fretboard extension down into the topsheet etc. depending on design. You might be able to just lower the saddle and forget about it without anything getting damaged but don’t assume you can. Unless it’s not worth it to you to spend a few hundred dollars on it. There is no correct string hight but most companies set them up to be as low as possible without buzzing.

@w13rdguy

10 ай бұрын

​@@Stratsrule1.5-2mm(It's personal preference, really, but you can find your specific model spec sheet online) and, after you set proper neck relief, if it's still high, you can "shave the saddle." The first step of shaving the saddle is to have an extra saddle on hand, in case you shave it too much. How to do it? Look it up on KZread.

Another fantastic job! You got some skills :)

@TanyaShpachuk

Жыл бұрын

Thank you 😊

That was an outstanding recovery after the crack worsened while attempting to expand it for applying cleats, and gluing. Like you, I'm also on the fence regarding the use of hide glue. I normally thin Tite-Bond with a bit of distilled water. Then again, I agree that the hide glue does set more rapidly, Nevertheless, this was well done. I'd like to buy you a coffee.

Thank you for your great job. I learned a lot from you. 🧿🙏

Good as new!! 👏🏼

Very nicely done ☮️❤️🎶

Entende Portugues, Brasil, Congratulations !!!

We need a lick after this brilliant work 👌

Thanks for the therapy

Good job ! You are the best !

@TanyaShpachuk

Жыл бұрын

Thank you

Congratulations warrior

Excellent work 👏 ❤ Nesrly invisible repairs sre hard to get right!!

nice work!

That was definitely beautiful work!!!😎

@TanyaShpachuk

Жыл бұрын

Thank you!

@sammygarcia5301

Жыл бұрын

@@TanyaShpachuk You're Very Much Welcome!!! Keep Up The Good Work ! 😉

Beautiful work you are a true artist

@TanyaShpachuk

Жыл бұрын

Thank you ☺️

Hey! New sub! You have an amazing gift Tanya! Keep up the content!

Tanya. You have restrung this differently than your stringing video! I do like this method

Ver4y nice recovery Tanya, sometime we make things worse before we make them better.

👏👏👏 great job! 👍

@TanyaShpachuk

Жыл бұрын

Thank you!

@rodrigoandril978

Жыл бұрын

@@TanyaShpachuk 😉

👌good job 😎

Гарна робота! Але мабуть потрібно на різьбові зʼєднання (болти) надіти короткі силіконові трубки. Це гарантує запобігти подряпинам на корпусі при такому варіанті склеювання. ;)

This Girl is very good.

клевые струбцины, надо бы тоже таких наделать, спасибо за идею :) А еще впечатлило, что лады полируете без малярного скотча даже, и все быстро и четко получается!

Very very good 👍😊 Love you too 💗😘❤

I have known and worked with Mastercraft people for quite some time and you would be welcome.....As you probably have discovered by now there is a spiritual language and a music that most of the world can't hear or see , only true Artisans are born with it .🙋

Great repair work on a lovely instrument 👍

@TanyaShpachuk

Жыл бұрын

Thank you ☺️

Well done! Did your heart skip a beat when that crack widened? Mine did a little. 😳 As many have suggested here, it's all in a day's work. But still... outstanding job as always!! 🤠👍

i enjoyed not having to do this job, and all the scritch scritch sounds.

доброго ранку) Таня, подскажите, 505 клей это обычный цианокрилатный клей? То есть в принципе можно использовать любой секундный клей или космофен например? дякую)

Always like to see what nail design on rhe video

Those braces looked a bit thick, but I'm only a clumsy amateur. Fish glue is a good alternative for hide glue I hear, though I haven't used it yet. Your work is solid, so and I like how you approach things.

Good job. I was scared seeing you use oversized gloves on the band saw. Simply wearing gloves with certain power tools is controversially thought by many to be dangerous, but wearing oversized gloves makes it much easier for the tool to hook your hand. I ask you to be more careful. Fretboard work is exactly what I do and I really enjoyed it. Brava!

Tanya, can you make a video on soldering? We would love to see your skills.

Fab video. Any chance of letting me know what's the pickup system on this guitar, please?

Great job! Did you use suction cups to migrate the glue into any parts of the crack?

Мало коментів українською. Неподобство! Виправляю 😎 Гарна робота, колись я вам привезу на реставрацію свою гітару

@TanyaShpachuk

10 ай бұрын

Згодна з вами:) дякую 🫶

Watch your every video gives me a new lesson, thanks for sharing your brilliant work, I wish I can have a workshop like your's, keep doing , love from Pakistan 🇵🇰, can I join your workshop?

Una pregunta … veo que usas para rascar el sobrante de pegamento … no se ralla el diapasón ? Gracias

You do very fine work Tanya, I'm impressed. If I may ask, how did you become interested in doing this kind of work?

3:15 at first i thought you started singing. 😄

Another great video. Awesome work! How are the English Classes coming along??

@TanyaShpachuk

Жыл бұрын

thank you, but weird question:)

@chrisoakmountain2387

11 ай бұрын

How is your Ukrainian coming along, Billy? Or any of the many other languages you are learning?

Awesome job. Congratulations Tanya.

@TanyaShpachuk

Жыл бұрын

Thank you 🙏🏻

@johngrant5749

Жыл бұрын

I could still see the crack in the side

Excellent repair and so well done! I really enjoy your work. Have an excellent day. Cheers.

@TanyaShpachuk

Жыл бұрын

Thank you!:)

Video molto bello .. per la richilite che pulizia fai? Puoi far vedere anche la lavorazione dell'interno ... come hai istallato i supporti sulla fascia - grazie

another excellent job, a question, what number of sandpaper do you use to level the frets?

@TanyaShpachuk

Жыл бұрын

Thank you! It`s 240p

Great video. That was not you fault. It was seriously cracked.

Awesome job! Where did you learn the trade?