Looks like the work of an apple authorized repair facility.

@MrPnew1

13 күн бұрын

some of the Genie-Arses finest work 🤣

@HalfOgre0520

13 күн бұрын

Seems legit. 🤣

@themysteriousspeeddemon

13 күн бұрын

💯 What I'd think, they care not for their customers' satisfaction so much as their wallets.

@Ojref1

13 күн бұрын

all the holes destroyed gave it away

@Kane0123

13 күн бұрын

Isn’t this related to the thing where people were not permitted to resell so they would break the device to enable selling as parts only?

The way they destroyed it makes me feel like it was a developer unit or something…. As if they wanted to hit the bare minimum to clear “destructed” status for tax reasons…

@gmcnewlook

13 күн бұрын

That kind of makes sense

@MrEdes7

13 күн бұрын

Intentionally destroying something should just make your stuff non tax deductible, we are creating so much waste from this behavior.

@ABaumstumpf

13 күн бұрын

@@MrEdes7 "Intentionally destroying something should just make your stuff non tax deductible" There are many reasons why you would WANT to destroy the hardware, often it even is a requirement. But this here is just slightly damaged.

@MrEdes7

13 күн бұрын

@@ABaumstumpf ok then they just can't deduct taxes on that expense, if security is important to them then they can just pay for it.

@Slay1337pl

12 күн бұрын

@@ABaumstumpf Such as? You know, considering it's a company that prouds itself on it's eco approach and recycling.

You are such a treasure being able to resource and repurpose e-waste parts so that broken hardware may live again. That box of intentionally destroyed boards must have thousands of dollars worth of donor parts just waiting to be tapped. You are a good man for being financially "green".

@megatronskneecap

13 күн бұрын

I wouldn't class an M2 logic board as "e-waste parts" at all.

@Look_What_You_Did

13 күн бұрын

Hope you find sobriety.

No need to damage them. Just leave an AppleID signed in, then the thing is fűcked anyway

Apple: Destroy those prototypes! grind them and make them unusable! dosdude1: Hold my beer

@bennaambo2716

13 күн бұрын

well keep in mind apple and all other Tech companies are obligated by law to destroy any prototypes after the validation is finished

@JamesTK

13 күн бұрын

@@bennaambo2716all the SOC’s should have been drilled then at the minimum before sending for recycling…

@Look_What_You_Did

13 күн бұрын

@@JamesTK Nope.

@ranjitmandal1612

9 күн бұрын

🫣

Great repair! Very resourceful using those DTK boards. 👍

@rockpie.squashfs

13 күн бұрын

Holy poo it's Mac84

@harryroesser3916

6 күн бұрын

Holy cow it's the guy himself mac84

Watching you dismantle and reassemble logic boards, I/O ports, etc. is like watching a neurosurgeon at work. I sit and watch in total amazement as you work your magic. Thanks for taking the time to do these videos.

Reminds me of something. Found a guy who was throwing away a G3 imac that had similar damage. He said he needed to destroy it because of HIPPA laws. The thing still booted.

@soundspark

12 күн бұрын

If he spelled it that way then he was probably a fake doctor...

@PlumGurly

11 күн бұрын

Generally, it is the hard drives they want destroyed. I don't see why a x3 or x7 wipe wouldn't be enough. But bureaucrats.

@nathanharrellyoutube

10 күн бұрын

It could have been owned by the state they destroy their devices when they get new ones

@psirvent8

12 сағат бұрын

@@PlumGurly x3 and x7 wipes take literal days to be done.

Wow, I had considered buying this very mac mini on ebay, and had even sent the seller a low-ball offer. Then I saw somebody bought it and was kinda like "Well I don't quite have the repair hardware to fix that so that's kinda a bullet dodged" that is so funny!

I worked as an intern for a company, and one of my tasks was destroying hard drives. They told me that taking a flathead screwdriver and ripping the board sufficed. Given that we're now in the era of soldered-on SSDs, this is probably the same assignment I had ten years ago.

@askhowiknow5527

12 күн бұрын

But this technique doesn’t work… This is done to make it unusable so that it can’t be resold except for parts

@SapphicCode

12 күн бұрын

@@askhowiknow5527 well... yeah. The hard drives were encrypted and wiped. I'm guessing it was only done to belay the superstition that wiped media is not truly wiped. The Mac here was wiped too.

@lukedavis436

12 күн бұрын

Where I used to work I couldn't take anything from E-waste, I still did but I pulled the hard drives so they couldn't pull the "Data Breach" Card

@JoducusKwak

12 күн бұрын

makes sense, the method to make to "destroy" data does not need to be actually effective it just needs to be legally "effective" and that means as long as the common guy from the street cant get at it thats enough

@PlumGurly

11 күн бұрын

@@SapphicCode -- It seems they should allow just removing and destroying the NAND array or whatever. Then there is no chance of recovering data, and the drives can be recycled without a data breach. Virgin storage chips could then be installed.

Awesome work Colin! Btw I highly recommend getting a good vacuum desoldering gun, it’s the cleanest ands fastest way to clear solder from through holes.

I'm so surprised, shocked, that they are using through-hole components for these ports. I didn't even know they made thru-hole USBC ports. Every other repair video I've seen the last few years (Xboxes, PS5, Laptops) all use surface mount ports, which of course increases the chances of breaking the port off the pads. I see the downside of using thru-hole parts is the ends of the legs act as antennas with the very high frequency signals, thats why they need the RF shields on the back of the pins.

@ozzelot3349

13 күн бұрын

They do. We use them in a (small run) product, perhaps someone decided they'd be easier to hand solder. Idk who that someone was, but they clearly didn't know of drag soldering.

It is always awesome watching you work your magic. Not only is it relaxing, but satisfying when you get a machine that has suffered such serious damage up and running again. Great job in keeping this beautiful Mac alive and well.

@Techforlife280

11 күн бұрын

I agree he is awesome keepin a brand new computer running back again.i wonder why it was destroyed in the first place?

Your soldering skills are amazing! Watching you bring old hardware back to life is inspiring. Thanks for sharing your knowledge and helping the community improve our own repair skills!

Low melt solder plus desoldering gun could have been great to that port replacement method. And that bit warping on USB-A ports could have been avoided. But still a great save on poor devices! Kudos! 😊

@JorgeTamezPhoto

13 күн бұрын

I don't think the usb ports were warped, I think that shape follows the curvature of the housing, no?

@Levent_Ergun

13 күн бұрын

@@JorgeTamezPhoto yeah I dont think so either, didnt even think there was anything wrong with the end result until I checked the comments.

@mikepxg6406

13 күн бұрын

NAH !!!

@crashoverride328

12 күн бұрын

Low melt is key.

The damage is definitely unusual, but what’s more strange is that this isn’t even an old machine. How often do they need to upgrade to new Macs if this was from a company? It’s unfortunate to see that damage on a new Mac but at least it wasn’t completely destroyed. Great repair!

@keneshindev

13 күн бұрын

that's because it's a developer transition kit

@memediatek

13 күн бұрын

​@@keneshindev It's an m2

@pap3rw8

13 күн бұрын

My guess is it was a surplus unit from an industry with tons of funding and a requirement that all electronics be "destroyed" before disposal. Government/military contracting, etc.

@TheOriginalCollectorA1303

12 күн бұрын

I know about the DTK units, very cool system. I was talking about the M2 Mac.

@TheOriginalCollectorA1303

12 күн бұрын

That makes sense, definitely seems like it had to be done in order to meet requirements of some kind.

Great job as always !

Another very impressive repair.

Desoldering through -hole components is quite easy with the proper tools. You need to get yourself a desoldering iron that has a vacuum to suck the solder off the lead and out of the hole at the same time. As someone who used to teach soldering and rework of boards, this video gave me anxiety.

Awesome video! Your soldering skills are awesome!

I‘ve seen these damaged ports on amazon return devices that went to liquidation pallets.

There’s a special place in hell for people who destroy perfectly good electronics.

@Kepler_2258

2 күн бұрын

its cause they dont want ordinary people to get "free" electronics from the trash so they destroy them, its nothing but Greed

Great job as always 👍

You are from another planet my friend. Congratulations

Superb work

you are doing such awesome work

First time watching you, I love how calm your voice is!!

Wow, this is draconian!

The work you do is very important. I appreciate you sharing the information as you do your repairs, how informative and well researched you are. Keep on keepin' on! -Mark

Impressive skills!!!

Awesome. Since watching you, Louis, etc picking up pointers and some confidence I have started trying with smaller and smaller components with better and better luck. Not quite ready to reball chips but getting there. Appreciate what you do. If you do more through hole I totally advise a decent solder vac. Not the plunger crap or the sucker bulb but an actual unit with a vac pump. I have a new chinesium hakko clone at work and an old pace at home. The latter has a foot pedal so it it's extra easy to deal with and couldn't work without it.

@MrPnew1

13 күн бұрын

it's Louis Rossmann not Lewis

@JamesHalfHorse

13 күн бұрын

@@MrPnew1 I know I know. Habit/not paying attention. Feel better?

Well saved!👍👍

Great job as always! Instead of using desoldering wick and air to get these type of components out. Would it help you to use a desoldering like the FR-301? I personally wouldn't do it any other way and it saves me so much time.

I've previously had success with desoldering combined 4 ethernet port thingies from routers with a soldering iron, without melting the little plastic tabs. You just get a really big copper soldering iron that outputs like 50-100w of heat (they're dirt cheap), put a big solder blob on there, kind of haul it around the pins with the soldering iron, and it eventually just falls off if you're quick enough. The little components in between the pins can probably be removed either with a small hot air nozzle or with the same kind of quick soldering iron application (preferably not the 50-100w one), where you heat up one end, then quickly go to the other and pull with your tweezers.

@gleb.salmanov

13 күн бұрын

You can also probably do the same for resoldering the new ports to the board. Instead of wicking the old solder, just leave it there, and let the new port kind of penetrate it with the help of the heat from the 50-100w soldering iron.

I found that a friend of mine did the same with the ports on his old iMac that had failed (and he removed and destroyed the memory cards), because he thought it would prevent anyone being able to access his data.

How did you check the serial number for activation locking?

I love your videos, you come off cool as a cucumber. No problem too insurmountable. Thanks for the great content, keep it up!

Time for a Hakko FR-301 desolder gun? I know I want one :) And o man, that graveyard... Good you find use of them. Edit: awesome result

yeah! cheers dude

Fascinating

Where did you find a replacement for the damaged back plate?

What series of adapters are you using to connect this Mac to your Cinema Display ?

The hot air with a soldering iron is what you need to do on some early boards too, like an IBM PC, for instance. They have ground planes inside the layers, and they act as heat sinks. So you'd need the hot air to heat up the ground plane and then the soldering iron gets the other layers.

dude can you post videos on ram upgrades on apple silicon mac

I'm impressed how you managed to empty these holes only using wick, flux and the hot air gun. It has never worked well for me and I have to use the air pump, though it's not always great. Your video makes me want to try again and insist!

Amazing... What is the temperature of the board preheater?

I bought a couple of identical Mac's Mini's to an auction here in the UK for spares .. I was told the damages to the ports where made in order to make the machine unusable for some legal reason's or something to that effect.

Could be it came from an institution with some seriously anal retentive security policies. A place where I once worked literally epoxied shut just about every port on any computer that they provisioned. Yes, modern OS's these days have user profile level controls that can lock out stuff like USB port usage, etc. Even so, some companies still insist on physically locking things down. I've never personally seen anyone go medieval on ports with a drill or whatever like in this machine, but I'm sure it happens.

@Oyashiro_Chama

13 күн бұрын

Governments typically will do this too, but newer systems have a lockdown system that is software/account based.

@Dave102693

13 күн бұрын

@@Oyashiro_ChamaiCloud lock lol

@99domini99

13 күн бұрын

I know the Dutch police literally shreds every retired device. While a lot of those are laptops that can have their storage devices removed, they just toss all of them in a shredder. Literally millions of euros worth of e-waste. Perfectly good laptops, computers, tablets of maybe a few years old shredded to pieces. We should regulate the crap out of practices like this. All of us regular citizens are borderline bullied into being more aware of our waste, then government facilities come in with their “rules for thee but not for me” bullcrap.

@Oyashiro_Chama

12 күн бұрын

@Dave102693 no, active directory it's enterprise wide.

@soundspark

11 күн бұрын

@Oyashiro_Chama AD doesn't control the hardware however; the closest thing to that would be using AD to deploy BitLocker so you can't boot into an alternate OS and copy off data without having access to the BitLocker recovery key database.

You should get some low melt solder to help get the old solder and components off

The crazy part was I got one like this from the job I worked at let’s just say it “fell off a truck”. but at the end of the day all the ports worked, like everything worked fine. The only thing was the heat sink had like something jammed into it and it’s all messed up, but that’s only like a small part of it other than that it has dings and scratches everywhere, but I just use it as an extra computer that I mine on because I already have a MacBook Pro and a windows desktop PC. It also is a really nice looking desk piece, but I can’t wait to find more that fell off a truck, I did have to do a lot of troubleshooting and figuring out how to reset it and jailbreak it but otherwise it worked perfectly fine.😊😅

A apple hardware test, booting with the D key, could be helpfull 😊

11:24 what do you do with the wick when it’s removed for a few seconds at a time?

Great job. Another Mac resurected.

Brilliant! So, with SOC it seems the only way to ensure on-board drive data can’t be recovered or scavenged by third parties is to effectively destroy a whole good machine. Wow! Love to know where sustainability fits in with this. That’s progress alright.

@gleb.salmanov

10 күн бұрын

No, this isn't the only way. There's also the way Google does it with Android Verified Boot and their Pixel phones. You can set your own key with which the system image is signed, and only the correctly signed system image is loaded by the SoC. Thus, you establish a root of trust that originates with the user, and everything becomes completely replaceable by the user. From the OS to the flash memory. It's a crying shame that nobody but Google follows the standard properly for Android phones, and that there's no similar standard for PCs/laptops, at least as far as I'm aware. The secure boot nonsense on PCs/laptops seems to be a theatre more than a real good security measure.

you really are increadbly talanted, thanks for putting these videos out, i cant imagine how much work went into getting it all done.

I had something like this happen to my Mac Studio. They had to replace the entire Logic Board. I think it can be mechanical issue.

WOW!!! Someone was not happy. Good job. Apple would have most definitely rejected the repair.

@dosdude1 I am in the need for a PMIC of an M1 MacMini. Hard to come by that chip alone. Would be great if you could share the source of how to buy those DTK boards or similar M1 MacMini donor boards. Thanks!

@dosdude1

13 күн бұрын

The PMICs on the DTK boards are not the same as what's used on M1 systems. However, the PMICs on all regular M1 machines (not M1 Pro/Max/etc.) are all the same, so you can get one off an M1 MacBook Pro or MacBook Air as well.

@PhuketMyMac

13 күн бұрын

@@dosdude1 I've tried one from an M1 Air and even though it's starting (I can hear the chime) I get no display. I was told the PMIC on a MacMini is different hence why I get a partial working state. Are you certain here are the same please?

Real nice repair but I'm quite surprised they're not SMD parts...

Would a Hakko FR301-03P help clear the through-holes?

Dang, $200 plus repairs is a steal!

I should have a replacement back panel in excellent condition if you need one.

I enjoyed this video

I think it might be a way to discourage people from buying stuff to be able to repair them so some sort of anti-repair because if they see reports they’re less likely to want to try and fix it

It could have been interesting to do a deep scan to see what was on the storage.

Use low-melt solder to make wicking process way easier than just using leaded solder

Deep respect for getting this done. I fully understand the guy breaking them. I guess he had to replace one for himself and got mad 🤣

Probably this came from some enterprise setting or something and they did try to disable this mac mini, glad to see it survived! Crazy to see that the ports are actually through hole components! I thought they were just surface mounted! Even i could do this fix then :p

These used units are purposely damaged to prevent resale. However, they still manage to get to places like eBay from China. Often if it sounds too good to be true.............

Get yourself a Desoldering station. Yest they are expensive, but they make desoldering an absolutely a breeze. You need one that uses an air compressor to provide a vacuum. I used one for years and they make the desoldering of large arrays of pins like this so simple.

A desoldering iron would make cleaning out those ports super easy. I flood fill the lead free solder with leaded till it’s blobbed out on both sides. Then I’ll put the desoldering gun on the solder then watch it melt on the opposite side, then hit the button. Instantly sucks all the solder through the holes. Way easier than wicking.

You can use a serial number to check if it wasnt reported and locked but that does not mean it does not have an icloud account logged in.

Could there be arc damage too? It looks like the damage is following the ground plane. I have seen things like this when I was a kid and the TV would go out because of lightening hitting our apartment building.

@jhonjhon1740

10 күн бұрын

If it was any sort of arc damage than the board would be toast.

Great job, but man you need a solder sucker plunger for through hole stuff, it would go 10x faster

@gorak9000

13 күн бұрын

He needs a vacuum desoldering gun - if you're doing any amount of through hole desoldering, skip the manual pump, and go straight to the powered one - it saves a TON of time

Nice job, dude. ★★★★★

Could it be ex-display, so preventing the public from putting things into the ports?

Dear Mr. dosdude1 Great Morning... Is it possible to upgrade the A1311 21.5" Late 2009 unit? There isn't a gpu card slot on this unit...can we add solder the card bracket holder so we can slot the card in it and to put a 512GB card or 1GB card on this unit... is that even possible please advice Mr. dosdude1... Thanks

They clearly used a drill bit until it hit and chewed up the inside of the connectors, same as how some hard drives are mangled by drilling through into the platters. Likely for insurance reasons to buy newer equipment but have the originals not have resale value

How do you check iCloud lock with the sn?

hey dosdude does the i7 2700k work in the 27 inch 2011 iMac

i think companies should pay a fine for having electronics with damaged ports, cus now its just e-waste

the pins soldering seems to have cold joint

They often do this to make repairs uneconomical. Some companies have strange recycling policies, hoping their products won't end up on the second-hand market. But that doesn't always work, like in this case, they still ended up on the second-hand market. 😁

I wish I was doing stuff like this daily, I dont like macs though. I found the port design unusual, seems like a game console with how robust they are

Even cheap desoldering iron is great tool for through hole parts.

Yes apples drills the boards but did you know that you can actually still use those and put some to get back together especially if you find one of the developers kits you really want to do that

I'm wondering why you don't own a de-soldering pump with all this kind of work you do. It helps a lot with working on through hole components.

Well, it could be an attempt to lower costs on importing. Back in the day we would take expensive cars cut them in half and import them as scrap to avoid excessive taxes and fees for imports.

@jackgerberuae

12 күн бұрын

And thanks to you and your mates in the pc industry, they now decided to solder the components to prevent this type of monkey business. 😅 You rewelded the cars back into one again?

Apparently the same tech that worked on Snazzylabs’s iMac Pro, also worked on this mini lol

You know, if you can’t make my old and new Mac’s sing I don’t know who can, dosdude1!

6:02 Well, Apple really knows how to make stuff extra hard to repair…

I almost bought this unit. You beat me to it

Can I buy a dtk it would look cool for some wall art

Not a fan of apple products, at all and I'll never own one, but... These types of repair are interesting to watch... Weird sub for me but you've got it.

What did Action Retro do to this thing?

I have seen exactly the same damage in Sweden?

Why are those mini drilled?

I work at an electronics recycling facility which has contracts with the local university and school district. Word on the street is that the manufacturer (in this case Apple) requires the ports to be destroyed when the organization gets rid of their units to keep them off the secondhand market. I also see this done to Cisco network switches, and some Ubuiquiti stuff. It also seems like a great way for IT staff to vent their frustrations.

@diegog6032

12 күн бұрын

I'd be interested to see Ubiquiti products destroyed, didn't know they did that. The worst I've seen are just super dusty APs from being on ceilings forever lol

@gleb.salmanov

12 күн бұрын

This should totally be illegal

@lukedavis436

12 күн бұрын

I stab the EMMC chips on Modems, routers and IP phones as we have to be certain data is destroyed on Devices which couldn't be booted up.

@gleb.salmanov

12 күн бұрын

@@lukedavis436 you stab the shiny silicon ICs themselves, right? Right?

@lukedavis436

12 күн бұрын

@@gleb.salmanov i destroyed all 3 chips on the board as I had no clue which one was the EMMC, (this was a Cisco phone) I only did this as the phone was dead, if it worked I'd Factory reset it

I've gotten a few enterprise systems like this, it's some person thinking they can save company money to earn a potential bonus by not using a known reliable secure destruction service. Because in their mind: Ports unusable = computer unusable

Dude i though was hoarder of agp cards to cross flash for g4 power macs have about 50 of them , after seeing that box of logic boards zomfg hoarder dude