My socials: beacons.page/eddievak Use discount code EDDIEVAK for 5% off at www.thecubicle.com/
Жүктеу.....
Пікірлер: 365
@user-km8ww7tv4k6 ай бұрын
When i look at speedcubers it feels like they are only doing r and u moves
@Supergoat1332
6 ай бұрын
They do it because it’s usually easier and more precise to turn the side with their right hand and turning the top with your left finger is quite easy
@Minjeyo_
5 ай бұрын
@@Supergoat1332what a weird reply
@tiniustreider9466
5 ай бұрын
@@Minjeyo_why
@Minjeyo_
5 ай бұрын
@@tiniustreider9466 because, it doesnt make sense. The comment is stating that "it feels like they are turning R and U moves only". But the reply is telling what he already knows. Which is weird, of course they are turning with their right hand and using the top finger is easy. It doesnt explain anything at all.
@akmuchbetter9782
4 ай бұрын
@@Minjeyo_I think he thinks the og comment wasn't talking about prime moves
@Justincow6 ай бұрын
I will definitely put this one into practice!
@alirahman1015
3 ай бұрын
Same
@mehmetkhadra21106 ай бұрын
Its really useful the fact you dont regrip
@Eddievak
6 ай бұрын
You regrip at the beginning of the alg. The nice thing about this e perm is that you get AUF on the U face and not the F face
@danggumball5730
6 ай бұрын
no, u can do it without regrip at the beginning, just get good
@thirxzy
6 ай бұрын
insanely unergonomic lmao@@danggumball5730
@MyoKyawKhant
5 ай бұрын
@@danggumball5730The hell kind of fingertricks are you using. Thumb on B face is mad 💀
@abrahamjh5742
5 ай бұрын
@@MyoKyawKhant probably a rolling R’ (lift the thumb off the cube and do an R’ with either of your fingers)
@Cubehand693 ай бұрын
step 0: get a good cube
@manface3167
2 ай бұрын
Can't
@MapleLeafRoblox
2 ай бұрын
That’s so true
@Mason-is4mr
Ай бұрын
$8 Amazon easy. Or $14 but it's not that hard or expensive lol
@nirnaysinha8864
Ай бұрын
@@Mason-is4mr Bro even if it's $1, I would still feel pain. Forget about $8. That's sky high expensive.
@pierceduckworth5678
Ай бұрын
@@nirnaysinha8864The Rubik’s brand cube is literally more expensive, if you spend 8 dollars you can get a good functioning budget cube
@YahyoonyAlAmrie3 ай бұрын
I tried this all in the beginner method and all it did was put the corners in their correct spot
@myweirdsecondchannelwithap9070Ай бұрын
This alg is literally the beginner method step but just put together
@DomenG33K
Ай бұрын
No its isnt... It literally isnt...
@ILoveMath_Cats_Coding
4 күн бұрын
No?
@myweirdsecondchannelwithap9070
Күн бұрын
@@DomenG33K it literally is
@seemagupta11793 күн бұрын
Never thought an E perm could be good
@Eddievak6 ай бұрын
Credit to Monkey League for the Tymon clip kzread.info/dash/bejne/o6pt0MORcbaxm5M.html
@_ThatRandomCuber_
6 ай бұрын
First
@NabihAhmadKhanАй бұрын
I love the color scheme of the MoYu Weilong v9 special edition the blue internals look sick
@prithwi38111 күн бұрын
Would it work in every situation of last layer after matching all yellow?
@Uminguss2 күн бұрын
Just fix the corners, orient the edges, solve the 2 edges on the side then solve the rest
@AngelPlayz_II3 ай бұрын
I learned the left version that includes a rotation at the beginning (though it feels more like a r' regrip)
@svoda6 ай бұрын
I use the inverse but I should probably switch
@Eddievak
6 ай бұрын
Yeah idk who’s teaching the inverse of this to you guys
@svoda
6 ай бұрын
@@Eddievak no one lol I figured it out myself
@LucyDogGuy
5 ай бұрын
@@svoda Lol yeah I found the same thing and have been using the inverse, did you end up switching?
@svoda
5 ай бұрын
@@LucyDogGuy nah, I actually ended up using the standard alg (it’s consistently sub 0.9 for me)
@LucyDogGuy
5 ай бұрын
@@svoda alright, thanks
@CwDoo201229 күн бұрын
Ain’t no way bro made me just do it so I had the same cube
@abdullahalhanbali485425 күн бұрын
Its cool how there are different methods to solving certain layers. I just learned how tp solve a rubiks cube, and ill be setting this as my next goal!
@BuildandCreateWithUs5 ай бұрын
I've always used this one, one of my favorite algorithms 😅
@ThomasKhandelwal
26 күн бұрын
It requires a certin case?
@IloveBloxFruitsAndCats5 ай бұрын
Non cubers: here is a much easier one it has one less move! Oh wait i forgot it Cubers: E perm go brrrr
@haleemashahid4405 ай бұрын
I dont know what i dud wrong but ut is not working
@benleonard1602
7 күн бұрын
Did you do PLL before attempting?
@doraemonoldvideo
4 күн бұрын
@@benleonard1602 BTW I have the same problem and I am pretty sure I made no mistakes. What's PLL BTW?
@ilitomili55545 ай бұрын
Can’t figure out what I’m doing wrong but it won’t work
@Yaseen_7861
5 ай бұрын
Same
@Lukcarrot
4 ай бұрын
Did it turn into H perm?
@akmuchbetter9782
4 ай бұрын
Only works on two sides
@master_0f_gaming
4 ай бұрын
That's E perm
@ARCmusic101
4 ай бұрын
@@Lukcarrotif it gave u H perm then you excuted the alg from wrong angle . E perm can be excuted from 2 angles and the rest of the times ( ie incorrect angle) will give you a H perm .
@diamondhunter694Ай бұрын
I love me a perfect rotationless e -perm
@levistepanian5341Ай бұрын
I like the e perm, it’s slow for me but it’s fun to execute. I used to do it the wrong direction lol
@KoCubing5 ай бұрын
I'm already using this E perm. Great alg, probably one of my favs
@dailydoseofshitpost75115 күн бұрын
basically an e perm without the rotation
@theunknown617725 күн бұрын
Best E perm out there, fuck the standard alg
@myrashakya509918 күн бұрын
I always used this alogo for E perm
@OmegaMaschennar4 ай бұрын
Note that before you call this fake, I'm pretty sure this only works on 1 certain case.
@Schizo_Phrenia45
4 ай бұрын
Yea, I tried multiple times but it seems that it only works at cetain cases like what's shown in the video...
@notyou8508
3 ай бұрын
Well yea, it's an E perm
@jackanderson1063
3 ай бұрын
😭
@WanAtiqi-kn3cf
3 ай бұрын
What is this comment😭
@heckersson988
3 ай бұрын
@@WanAtiqi-kn3cf Do people watching these videos actually even cube? 😭
@uncledengszarmwrestlingtv63753 ай бұрын
I prefer the commutator algs for tht case
@EVIL_G354 ай бұрын
It won't gonna work in 99% of situations
@danlambo6752
4 ай бұрын
same it just wont work
@sitaro1207
4 ай бұрын
If you don't know how to recognize the case then of course it won't work. But top cubers have already switched to this alg
@adioloos27
4 ай бұрын
?????
@dumflame
3 ай бұрын
It’s an E perm
@myweirdsecondchannelwithap9070
Ай бұрын
wtf?
@Rares_S321 күн бұрын
Thanks
@M789105 ай бұрын
The original e perm has rotation as well as we have to regrip also , i will try this 👍
@AsbjornOlling5 ай бұрын
Yes but the old E-perm is so fun and symmetrical... :'( I will miss it.
@UnCuboide4 ай бұрын
fast in 4 seconds 🥵😎
@BourghirАй бұрын
Its so funny when you try to say his name
@ThePham-ks4jd28 күн бұрын
Thank you❤
@electric97826 ай бұрын
I just imagine that its a burger first the top wich going down and back then we have the meats and veagies so up down left or rightthen we have the bottom bun
@Tugg_on_a_segway1013 ай бұрын
a question my friend asked me is "Does it work on every side?
@uppummulakumthuglife12344 ай бұрын
Thank you
@TechbrethrenАй бұрын
It's possible to do this since you have a good cube. My cube is so bad, I spend at least 5 seconds to make one turn.
@seethujoseph31845 ай бұрын
How did u get ur oll solved at the same time ur yellow edges align with the yellow cross???
@imugly71036 ай бұрын
Oh i think this is the easier solve/solution for the E perm PLL
@muhammaddayyan26423 ай бұрын
thank you
@fellowcuberhere6 ай бұрын
Thanks I'm finally sub 5 at ally plls. I used to be sub 3😊
@Twistedcubezz2 ай бұрын
Thanks super helpful
@darnelljr2261Ай бұрын
I hate how everyone just has their own terms for the cube like we're supposed to know like wtf is R2 cause looks Like it was just a normal R
@Dorfkind-zm4xi
26 күн бұрын
He turned R twice.
@cube17203 ай бұрын
This reminds me of a ZBLL I know
@enriqueff46015 ай бұрын
This solve is very diff
@blok4202 ай бұрын
I will use the standard alg. You don't even need to regrip
@IForgotTbh6 ай бұрын
I actually already use this
@ukim51075 ай бұрын
Don’t forget he got a below average solve using this e perm plus they both start with a regrip
@user-uo1gv6bz6p2 ай бұрын
It took me what felt like an hour dont know how long to get to the last step and I fucked it up and had to restart I was so pissed
@Hermes_francis77345 ай бұрын
I already know how to do the e perm
@luminiteshark6 ай бұрын
rotationless e perm?
@Rainbow-Dude6 ай бұрын
Gotta practice
@ItsmeRU08Ай бұрын
Pls fast way to get middle top side layers solved
@FortniteForLife1225 күн бұрын
Thank you I’m more fast now
@pullfunnystick6 ай бұрын
under what case can you use this algorithm?
@minechan7385
6 ай бұрын
Yes that's the question
@AwesomeEv
6 ай бұрын
e perm
@stemcareers8844
6 ай бұрын
E perm
@pessimistic55796 ай бұрын
Did the world forget the word E perm
@ironic8340
4 ай бұрын
Yes, because not everybody is a CFOP master
@pessimistic5579
4 ай бұрын
@@ironic8340 we're talking about the E perm, one of the easiest PLL algorithms. and even beginner cfop users at the 30 second mark should know full pll
@TechSupportDave
3 ай бұрын
@@ironic8340you dont need to be a master for it you cant be real bro 😂
@myweirdsecondchannelwithap9070
Ай бұрын
@@ironic8340the brainrot is insane
@vinayakashet1532Ай бұрын
In which angle it works? I returned to same position after trying
@PhoenixTheCuber6 ай бұрын
Dont use it, do a wide L into standered e perm instead of rotating and no regrips
@mineq4967
6 ай бұрын
Lmao bro thats a way worsw algorithm
@PhoenixTheCuber
6 ай бұрын
@@mineq4967 it's the same length if not shorter, no re-grips and easier to fingertrick..... How is it worse
@patrickponce4838
5 ай бұрын
@@PhoenixTheCubernot good if you have to AUF after
@PhoenixTheCuber
5 ай бұрын
@@patrickponce4838 that is true but it's not too hard to do
@justend3658Ай бұрын
does the yellow part have to be fully solved to do this?
@Real_Xavier.5 ай бұрын
I just use E-perm
@hira_khan2504 күн бұрын
BOSY
@hira_khan250
4 күн бұрын
Hwy
@juicejosh1520Ай бұрын
does this only work when no corners are solved?
@bob-pm2bq6 ай бұрын
E perm ofc
@Aysha-kx4jcКүн бұрын
Can you teach me middle column of Rubik cube ....
@KhizerDaProАй бұрын
How to do the finger tricks
@Ace_CorderoАй бұрын
i tried, now my cube is broken
@susmanjig.2233 ай бұрын
why homie hands so big 😂
@EKTAGUPTA74 ай бұрын
Thank
@BEAST_BOY_SHINOBI5 ай бұрын
Which cube u used in this video??
@emmanuelarredondo53652 ай бұрын
Does that only work if the yellow is solved?
@Brycebaz14 ай бұрын
Is there a way the last layer has to be
@AvgeekRPLL6 ай бұрын
When i search for this e perm algorithm, it always shows the L U version but im better at using my right hand so i looked for an R U version which is exactly the one in your video
@gabrielsia4578
6 ай бұрын
Alternatively u can take the LU alg and mirror it onto your right hand
@AvgeekRPLL
6 ай бұрын
@@gabrielsia4578 yeah
@praveen84395 ай бұрын
Not working
@Cheesehead8214 ай бұрын
Yea but that’s only an e perm
@faisalhasnain95923 ай бұрын
already set
@lavacurly2 ай бұрын
Hi, can I ask? I just bought a rubik's cube, and stupidly I scrambled it out of order. When I look at the toturial on ytb, I position the yellow center at the top, and the green center facing me. but I found a difference, where my red center was on the right side, and the orange center was on the left side. It looked different from the Rubik's video I watched.
@beybladebeyond094 ай бұрын
Is there a specific way to do this like do you have to have all the yellow on the top or what?
@justrelax4084
2 ай бұрын
Yes thats why it dont work in beginner method
@AleDuran.4 ай бұрын
Why it doesn't wooooooork 😢
@skyroq_osu7 күн бұрын
This does seem pretty fast. I personally use "x' (L' U L) D' (L' U' L) D (L' U' L) D' (L' U L) D". The cube rotation is weird to get used to but I think it is also very fast.
@emmadonaldson42236 күн бұрын
Wait cant i just (twistes coner)
@artwithanushka24474 ай бұрын
Useful algorithm 😮
@Thechessc2 ай бұрын
I’ll stick with r prime d r1 d prime
@DaoneanonlyBlud6 ай бұрын
I have no idea what those letters mean😅
@chrisdrayton
6 ай бұрын
look up cube notation
@zaynab27
4 ай бұрын
r stands for the right side of the cube l is for left u is for up d is for down f is for face
@Xeroc524
4 ай бұрын
@@zaynab27little note is that letter capitalization is important in notation since lowercase letter signify wide moves.
@zaynab27
4 ай бұрын
@@Xeroc524 do you mean capitalization shows clockwise and anti clockwise moves?
@Xeroc524
3 ай бұрын
@@zaynab27 denotes the difference between moving just the outer layer(capital letters) vs moving 2 respective layers together(lowercase letters). A ' in front of a letter denotes clockwise or anticlockwise. R would be a clockwise turn of the right layer while R' would be an anticlockwise turn of the same layer.
@Parasyte41412 күн бұрын
What cube is that?
@Bunz6855 ай бұрын
I did this with a Moyu Weilong WR M 2021 and I did a D6 by accident. My magnets are at max strength and my lube hasnt arrived yet 😢
@luuho156217 күн бұрын
can I apply it on PLL of CFOP ???
@amrihakim30826 ай бұрын
My average e perm is 3s 😅
@k3ndr1ck275 ай бұрын
What rubix cube product is that?
@MrSau2age6 ай бұрын
what cube do you use
@JunJun238
6 ай бұрын
wrm v9 ball core I think
@MrSau2age
6 ай бұрын
thx, Im looking to get a new cube for christmas
@user-jb6ix5gw5i
6 ай бұрын
Noooooo, looks more like a moyu ys3m
@monodragon
6 ай бұрын
@@user-jb6ix5gw5ii literally am holding a ys3m and it looks nothing alike, the ys3m is much flatter
Пікірлер: 365
When i look at speedcubers it feels like they are only doing r and u moves
@Supergoat1332
6 ай бұрын
They do it because it’s usually easier and more precise to turn the side with their right hand and turning the top with your left finger is quite easy
@Minjeyo_
5 ай бұрын
@@Supergoat1332what a weird reply
@tiniustreider9466
5 ай бұрын
@@Minjeyo_why
@Minjeyo_
5 ай бұрын
@@tiniustreider9466 because, it doesnt make sense. The comment is stating that "it feels like they are turning R and U moves only". But the reply is telling what he already knows. Which is weird, of course they are turning with their right hand and using the top finger is easy. It doesnt explain anything at all.
@akmuchbetter9782
4 ай бұрын
@@Minjeyo_I think he thinks the og comment wasn't talking about prime moves
I will definitely put this one into practice!
@alirahman1015
3 ай бұрын
Same
Its really useful the fact you dont regrip
@Eddievak
6 ай бұрын
You regrip at the beginning of the alg. The nice thing about this e perm is that you get AUF on the U face and not the F face
@danggumball5730
6 ай бұрын
no, u can do it without regrip at the beginning, just get good
@thirxzy
6 ай бұрын
insanely unergonomic lmao@@danggumball5730
@MyoKyawKhant
5 ай бұрын
@@danggumball5730The hell kind of fingertricks are you using. Thumb on B face is mad 💀
@abrahamjh5742
5 ай бұрын
@@MyoKyawKhant probably a rolling R’ (lift the thumb off the cube and do an R’ with either of your fingers)
step 0: get a good cube
@manface3167
2 ай бұрын
Can't
@MapleLeafRoblox
2 ай бұрын
That’s so true
@Mason-is4mr
Ай бұрын
$8 Amazon easy. Or $14 but it's not that hard or expensive lol
@nirnaysinha8864
Ай бұрын
@@Mason-is4mr Bro even if it's $1, I would still feel pain. Forget about $8. That's sky high expensive.
@pierceduckworth5678
Ай бұрын
@@nirnaysinha8864The Rubik’s brand cube is literally more expensive, if you spend 8 dollars you can get a good functioning budget cube
I tried this all in the beginner method and all it did was put the corners in their correct spot
This alg is literally the beginner method step but just put together
@DomenG33K
Ай бұрын
No its isnt... It literally isnt...
@ILoveMath_Cats_Coding
4 күн бұрын
No?
@myweirdsecondchannelwithap9070
Күн бұрын
@@DomenG33K it literally is
Never thought an E perm could be good
Credit to Monkey League for the Tymon clip kzread.info/dash/bejne/o6pt0MORcbaxm5M.html
@_ThatRandomCuber_
6 ай бұрын
First
I love the color scheme of the MoYu Weilong v9 special edition the blue internals look sick
Would it work in every situation of last layer after matching all yellow?
Just fix the corners, orient the edges, solve the 2 edges on the side then solve the rest
I learned the left version that includes a rotation at the beginning (though it feels more like a r' regrip)
I use the inverse but I should probably switch
@Eddievak
6 ай бұрын
Yeah idk who’s teaching the inverse of this to you guys
@svoda
6 ай бұрын
@@Eddievak no one lol I figured it out myself
@LucyDogGuy
5 ай бұрын
@@svoda Lol yeah I found the same thing and have been using the inverse, did you end up switching?
@svoda
5 ай бұрын
@@LucyDogGuy nah, I actually ended up using the standard alg (it’s consistently sub 0.9 for me)
@LucyDogGuy
5 ай бұрын
@@svoda alright, thanks
Ain’t no way bro made me just do it so I had the same cube
Its cool how there are different methods to solving certain layers. I just learned how tp solve a rubiks cube, and ill be setting this as my next goal!
I've always used this one, one of my favorite algorithms 😅
@ThomasKhandelwal
26 күн бұрын
It requires a certin case?
Non cubers: here is a much easier one it has one less move! Oh wait i forgot it Cubers: E perm go brrrr
I dont know what i dud wrong but ut is not working
@benleonard1602
7 күн бұрын
Did you do PLL before attempting?
@doraemonoldvideo
4 күн бұрын
@@benleonard1602 BTW I have the same problem and I am pretty sure I made no mistakes. What's PLL BTW?
Can’t figure out what I’m doing wrong but it won’t work
@Yaseen_7861
5 ай бұрын
Same
@Lukcarrot
4 ай бұрын
Did it turn into H perm?
@akmuchbetter9782
4 ай бұрын
Only works on two sides
@master_0f_gaming
4 ай бұрын
That's E perm
@ARCmusic101
4 ай бұрын
@@Lukcarrotif it gave u H perm then you excuted the alg from wrong angle . E perm can be excuted from 2 angles and the rest of the times ( ie incorrect angle) will give you a H perm .
I love me a perfect rotationless e -perm
I like the e perm, it’s slow for me but it’s fun to execute. I used to do it the wrong direction lol
I'm already using this E perm. Great alg, probably one of my favs
basically an e perm without the rotation
Best E perm out there, fuck the standard alg
I always used this alogo for E perm
Note that before you call this fake, I'm pretty sure this only works on 1 certain case.
@Schizo_Phrenia45
4 ай бұрын
Yea, I tried multiple times but it seems that it only works at cetain cases like what's shown in the video...
@notyou8508
3 ай бұрын
Well yea, it's an E perm
@jackanderson1063
3 ай бұрын
😭
@WanAtiqi-kn3cf
3 ай бұрын
What is this comment😭
@heckersson988
3 ай бұрын
@@WanAtiqi-kn3cf Do people watching these videos actually even cube? 😭
I prefer the commutator algs for tht case
It won't gonna work in 99% of situations
@danlambo6752
4 ай бұрын
same it just wont work
@sitaro1207
4 ай бұрын
If you don't know how to recognize the case then of course it won't work. But top cubers have already switched to this alg
@adioloos27
4 ай бұрын
?????
@dumflame
3 ай бұрын
It’s an E perm
@myweirdsecondchannelwithap9070
Ай бұрын
wtf?
Thanks
The original e perm has rotation as well as we have to regrip also , i will try this 👍
Yes but the old E-perm is so fun and symmetrical... :'( I will miss it.
fast in 4 seconds 🥵😎
Its so funny when you try to say his name
Thank you❤
I just imagine that its a burger first the top wich going down and back then we have the meats and veagies so up down left or rightthen we have the bottom bun
a question my friend asked me is "Does it work on every side?
Thank you
It's possible to do this since you have a good cube. My cube is so bad, I spend at least 5 seconds to make one turn.
How did u get ur oll solved at the same time ur yellow edges align with the yellow cross???
Oh i think this is the easier solve/solution for the E perm PLL
thank you
Thanks I'm finally sub 5 at ally plls. I used to be sub 3😊
Thanks super helpful
I hate how everyone just has their own terms for the cube like we're supposed to know like wtf is R2 cause looks Like it was just a normal R
@Dorfkind-zm4xi
26 күн бұрын
He turned R twice.
This reminds me of a ZBLL I know
This solve is very diff
I will use the standard alg. You don't even need to regrip
I actually already use this
Don’t forget he got a below average solve using this e perm plus they both start with a regrip
It took me what felt like an hour dont know how long to get to the last step and I fucked it up and had to restart I was so pissed
I already know how to do the e perm
rotationless e perm?
Gotta practice
Pls fast way to get middle top side layers solved
Thank you I’m more fast now
under what case can you use this algorithm?
@minechan7385
6 ай бұрын
Yes that's the question
@AwesomeEv
6 ай бұрын
e perm
@stemcareers8844
6 ай бұрын
E perm
Did the world forget the word E perm
@ironic8340
4 ай бұрын
Yes, because not everybody is a CFOP master
@pessimistic5579
4 ай бұрын
@@ironic8340 we're talking about the E perm, one of the easiest PLL algorithms. and even beginner cfop users at the 30 second mark should know full pll
@TechSupportDave
3 ай бұрын
@@ironic8340you dont need to be a master for it you cant be real bro 😂
@myweirdsecondchannelwithap9070
Ай бұрын
@@ironic8340the brainrot is insane
In which angle it works? I returned to same position after trying
Dont use it, do a wide L into standered e perm instead of rotating and no regrips
@mineq4967
6 ай бұрын
Lmao bro thats a way worsw algorithm
@PhoenixTheCuber
6 ай бұрын
@@mineq4967 it's the same length if not shorter, no re-grips and easier to fingertrick..... How is it worse
@patrickponce4838
5 ай бұрын
@@PhoenixTheCubernot good if you have to AUF after
@PhoenixTheCuber
5 ай бұрын
@@patrickponce4838 that is true but it's not too hard to do
does the yellow part have to be fully solved to do this?
I just use E-perm
BOSY
@hira_khan250
4 күн бұрын
Hwy
does this only work when no corners are solved?
E perm ofc
Can you teach me middle column of Rubik cube ....
How to do the finger tricks
i tried, now my cube is broken
why homie hands so big 😂
Thank
Which cube u used in this video??
Does that only work if the yellow is solved?
Is there a way the last layer has to be
When i search for this e perm algorithm, it always shows the L U version but im better at using my right hand so i looked for an R U version which is exactly the one in your video
@gabrielsia4578
6 ай бұрын
Alternatively u can take the LU alg and mirror it onto your right hand
@AvgeekRPLL
6 ай бұрын
@@gabrielsia4578 yeah
Not working
Yea but that’s only an e perm
already set
Hi, can I ask? I just bought a rubik's cube, and stupidly I scrambled it out of order. When I look at the toturial on ytb, I position the yellow center at the top, and the green center facing me. but I found a difference, where my red center was on the right side, and the orange center was on the left side. It looked different from the Rubik's video I watched.
Is there a specific way to do this like do you have to have all the yellow on the top or what?
@justrelax4084
2 ай бұрын
Yes thats why it dont work in beginner method
Why it doesn't wooooooork 😢
This does seem pretty fast. I personally use "x' (L' U L) D' (L' U' L) D (L' U' L) D' (L' U L) D". The cube rotation is weird to get used to but I think it is also very fast.
Wait cant i just (twistes coner)
Useful algorithm 😮
I’ll stick with r prime d r1 d prime
I have no idea what those letters mean😅
@chrisdrayton
6 ай бұрын
look up cube notation
@zaynab27
4 ай бұрын
r stands for the right side of the cube l is for left u is for up d is for down f is for face
@Xeroc524
4 ай бұрын
@@zaynab27little note is that letter capitalization is important in notation since lowercase letter signify wide moves.
@zaynab27
4 ай бұрын
@@Xeroc524 do you mean capitalization shows clockwise and anti clockwise moves?
@Xeroc524
3 ай бұрын
@@zaynab27 denotes the difference between moving just the outer layer(capital letters) vs moving 2 respective layers together(lowercase letters). A ' in front of a letter denotes clockwise or anticlockwise. R would be a clockwise turn of the right layer while R' would be an anticlockwise turn of the same layer.
What cube is that?
I did this with a Moyu Weilong WR M 2021 and I did a D6 by accident. My magnets are at max strength and my lube hasnt arrived yet 😢
can I apply it on PLL of CFOP ???
My average e perm is 3s 😅
What rubix cube product is that?
what cube do you use
@JunJun238
6 ай бұрын
wrm v9 ball core I think
@MrSau2age
6 ай бұрын
thx, Im looking to get a new cube for christmas
@user-jb6ix5gw5i
6 ай бұрын
Noooooo, looks more like a moyu ys3m
@monodragon
6 ай бұрын
@@user-jb6ix5gw5ii literally am holding a ys3m and it looks nothing alike, the ys3m is much flatter
Im going to practice this😊
Any move? Its to long hahaha
😂❤❤❤❤😊😊
Sjsjs
Nono 😮
Slow down 😂😂😂
Found this algorithm from cubeface
What method ?
💚
I have a much faster than that.