I finally did it after 2 years I gotta say this tutorial was a bit confusing at some points but I did it and I owe it to you so, thanks.

@daniellee560

Жыл бұрын

Glad you finally got it! The axis cube can be a beast to get the hang of, but it's worth it when it finally clicks!

@tirubachiniechetty51

10 ай бұрын

​@@daniellee560can you make a tutorial for the stickerless version

@daniellee560

10 ай бұрын

@@tirubachiniechetty51 I don't currently own a stickerless version, but I'm sure you would solve it the same way unless the colors were different.

@sumi-2312

8 ай бұрын

@@tirubachiniechetty51 you solve it the same way

@shivanshsinghiitbombay8407

8 ай бұрын

​@@tirubachiniechetty51search for "ghost cube" solving

Tried about 4 other tutorials before I found yours and all the others were so hard, thanks for helping me out. You're the best

@daniellee560

Жыл бұрын

So glad to hear it!

This man is going on my will I never thought i could solve this cube but this man just proved me wrong

I got one of these, from a company called Inverse Beyond the Cube. It's called a Stratosfear, but it is the same color (sky blue) on every side. I didn't know it is an axis cube. Now that I finally figured that out I might have some hope of solving the thing! 👍

I tried every tutorial and finally got it with this one. I watched the video probably 20 times but once i got it, it makes complete sense. It was confusing how you were holding the cube at some points but if i just compared it to a 3x3 and always kept the top layer up, it did the trick. Thanks so much. I feel on top of the world!!

@daniellee560

7 ай бұрын

So glad to hear you figured it out; that's why I do these videos - for people like you! Thanks for watching, and keep solving!

thank you soooooooooo sooooooo much i finally did it but the only thing is i had trouble making the yellow cross can u help me with that

@daniellee560

7 ай бұрын

The yellow cross can be difficult; sometimes you just need to do the edge swap algorithm a couple of times until you see one of the situations that I show in the video. After you get the hang of what to look for, it gets easier.

You are one of the best KZreadrs To teach how to solve weird puzles. this is a very good channel, And your tutorials are so easy to understand!

@daniellee560

11 ай бұрын

Thank you; I appreciate that!

Hey man this was awesome. Learned a new algorithm for the second row. I was using something else. That was awesome. Your last few steps might need a bit more explosion for different orientations. A bit of fiddling around between a couple of the algorithms for me there in the end. Thanks a lot

@daniellee560

Ай бұрын

Glad to hear it helped you out; I appreciate the kind words!

tysm for the tutorial i couldnt find any other for axis cube sadly a piece popped before i could complete it

The 3rd layer is not comprehendable at all

@addiej6188

6 ай бұрын

Glad I’m not the only one

@valiantwarrior4517

2 ай бұрын

Yeah. The algorithms for 3x3 don’t seem to work right. Not sure why.

Finally figured it out! Thanks!

Thank. This helped me to finally solve the cube

Bro Exellent no other tutorial helped me but your one did. I subscribed and liked and very very much thx

@daniellee560

Жыл бұрын

That's great to hear; thanks!

@enderbucket3519

Жыл бұрын

Same!!!

Thanks for the tutorial! Had issues with my second row centers being rotated as I wasn’t setting them up with the first cross. Also feel like there is a move at the end here I don’t use with my normal 3x3 but your walk though got me through it. Thanks!

I still need a slight tutorial on orientation on this thing but I got most of it thanks to this video. The perspective is a little confusing but after several rewinds and slow downs I got this

Thank you for the tutorial. I tried to learn this from many more videos but this tutorial was the best.😊

Thank you the only part that I still struggled with was F, U, R, U', R', F' but after I practice a lil bit I got the hang of it

Used your tutorial to finally solve my Mirror axis cube 😅 thank you

@daniellee560

Жыл бұрын

Glad you figured it out!

Thank you sir. This is one of the most frustrating cubes I’ve solved. I’ve always used F R U R’ U’ F’ to get the last layer cross on a regular 3x3. Then R U R’ U R U2 R’ (sometimes ending with another U) to position the cross pieces correctly. Not sure if I learned differently or changed something myself along the way. Regardless, it doesn’t seem to work well on the Axis.

@daniellee560

2 ай бұрын

This cube can be frustrating for sure. This is just the method I use; I'm sure there are other methods out there, but you're right, the last layer takes a little trial and error sometimes, but it always works for me.

@valiantwarrior4517

2 ай бұрын

@@daniellee560 It did work for me also. I had to do the algorithms more times, but once you get the cross in the last layer it’s pretty easy to finish.

Thanks for the tutorial man

Guys, if you get your center twisted on the last layer, do this algorithm, R, U, R', U. Do that 5 times and it should fix it.

Thank you! Took a few months, but I did it!

@daniellee560

6 ай бұрын

Glad to hear it!

17:35 third layer 19:55 next step

Love your vids.You also explain it very well❤❤❤Edit: all because of you I can average about 15 to 16 seconds I’m telling all my friends to subscribe to you

@daniellee560

2 ай бұрын

Thank you; I'm glad I can help!

@farhanaaktertanin7213

2 ай бұрын

Can you make a tutorial of 5x5

@farhanaaktertanin7213

2 ай бұрын

Ty

THANK S MAN,,,WONDERFULL EXPLANATION

Thank you for this! Watched a few videos and I found this one to be the most well explained.

@daniellee560

6 ай бұрын

You're welcome; thanks for watching!

Thanks Daniel! I finally solved it thanks to this video, again thank you 🙏

@daniellee560

6 ай бұрын

Good job; keep it up!

Solid tutorial to follow! Took me a good 3 days cuz I kept messing up, but I finally got it! Thank you!

@daniellee560

2 ай бұрын

You're welcome!

now this is tutorial. hat off mister

At the last part where you only need to orient the pieces you were lucky to have two already in place but what if you have 4 pieces all not in the right place? I did the first two then after wards idk how to continue since you didnt mentioned that in the video

@daniellee560

Жыл бұрын

You can use the same method to do 1, 2, 3, or all 4 corners. Just orient a corner, moves the next one into place and orient it, then the next, then the next. It will all work out in the end as long as you do the moves correctly.

My mind... officially boggled because of centers

@daniellee560

3 ай бұрын

They can be a pain at first, but once it clicks, you'll be like Neo seeing the code in the Matrix for the first time!

I AM THE 1000TH LIKE I HAVE ALL THE POWER

thank you very much! i've finelly did it. your tutorial is the best one i've seen

@daniellee560

8 ай бұрын

Glad to hear it!

I made the cube with your tutorial. So thank you so much

@daniellee560

Жыл бұрын

You're very welcome!

How do you move around the center pieces if they arent where they belong?

@daniellee560

Жыл бұрын

For this cube, I don't think you can do that; you'll need to start with the centers and build everything around them.

tysm

@daniellee560

11 ай бұрын

Yvw!

With the second last step, whta if it's one the other side of the cube? I tried doing it and it didn't work

@daniellee560

Жыл бұрын

If you mean making the cross, some of it is just trial and error. The method I show here works for me every time, but 8f you're having trouble, maybe check out another video and see if there is another method that makes sense. I've found that there are usually many ways to solve a cube!

At 14:54, what if the red piece is flipped

You helped me SOOOOO much cause my cube has been mixed for 2 YEARS

@daniellee560

Жыл бұрын

Glad to hear it!

Yea, so the thing with my situation is that the axis cube was already mixed up and I have no idea hoe to solve it since its the first time I've ever seen it

Very nice now I need to buy one it looks hard but the way you explain it much easier. I have a ghost cube but can't solve it do you have one?

@daniellee560

2 жыл бұрын

I actually do have a ghost cube but have never learned to solve it. I will get to it eventually but it seems pretty involved so it might be a while before I have that much time to devote to it.

@ginos.9771

2 жыл бұрын

@@daniellee560 I will wait you will explain better and make it easier.

The last layer cross algorith isn't working.what am i supposed to do?

@daniellee560

10 ай бұрын

Try doing an edge switch algorithm, then look again and see if you get what I had in the video. There are lots of different situations that are possible.

👍

Tip: solve it in shapes well if it helps

I finished the 2nd layer but the orange yellow edge is flipped. Help

@daniellee560

Жыл бұрын

You probably need to kick that piece out by inserting another piece into its place, then reinsert the yellow/orange piece correctly.

@Jacknoham

Жыл бұрын

@@daniellee560 how do you kick out a center? It isnt an edge.

@daniellee560

Жыл бұрын

@@Jacknoham you can't with a center; you'll have to start over and rebuild that side.

@Jacknoham

Жыл бұрын

@@daniellee560 ok

@akashgarg3609

Жыл бұрын

What if your edge is in the right place but it is swapped?

When doing the yellow cross, no matter what I do 2 of the edges are flipped but in the correct spot. What do I do?

@daniellee560

9 ай бұрын

It sounds like that would be the "L" shape, where two are correct, and two are incorrect. I have that situation at 19:45 in the video.

@lt1652

8 ай бұрын

Thank you I learned it.@@daniellee560

What do I do if two of the center pieces on the second layer are flipped?

@daniellee560

11 ай бұрын

I always orient the centers at the beginning when I am solving the cross. That way, you don't have to worry about them being rotated.

@lt1652

11 ай бұрын

@@daniellee560 ok I figured it out thanks

Where you try to get the yellow cross I just keep getting the L and then one point over and over

@daniellee560

11 ай бұрын

Try doing the edge switch algorithm, then see if you are able to get what I had in the video. That yellow cross can be tricky sometimes.

Can you say how to solve it when there is one corner left?

@daniellee560

Жыл бұрын

R', D', R, D until the corner is oriented should fix it. I explain this toward the end of the video.

I just got an offbrand one with no colors for christmas, and got stuck trying to line up the cross with the centers of the second layer. How am I meant to do this???

@daniellee560

6 ай бұрын

I've never solved one of those. Maybe since there are no colors, you only need to do the algorithm randomly until you get the cross pieces lined up smoothly. Then, I would think you'd do each corner piece until they line up smoothly with the rest. Let me know if that works out or not.

@Brass319

6 ай бұрын

@@daniellee560 As far as I've been able to find out, if this happens you just need to start over from a different center because you can't exactly slot a new one in

@daniellee560

6 ай бұрын

@@Brass319 that may be the case. I've never solved one like that, so I couldn't say for sure.

For some reason, on the last layer two of the corners are flipped. Only 2 of them. The cube is solved (like its back in square formation) but two of the inside triangles are flipped. I dont know what happened😭

@daniellee560

11 ай бұрын

It sounds like you just need to do the corner orientation on the two that are flipped. R', D', R, D until the first one gets fixed, then fix the second one the same way.

is mine corner twisted my top later cross wont work

@daniellee560

Жыл бұрын

It could be that yours is different; I'm not sure. Try to pause the video at some point and make sure yours is like mine; if it is, this method always works for me so it should for you as well. Good luck!

Friendly suggestion-instead if saying just do this create a video and explain what is the face up downright left movements in comparison to a 3x3

@ryangriffiths5179

Жыл бұрын

I have no idea what side is what. You could make five or six videos 10 minutes long each breaking this down. Doing the d r d’ r’ algorithm means nothing if it don’t know d or t are

@ryangriffiths5179

Жыл бұрын

Do you focus on the trapozoid😊

@daniellee560

Жыл бұрын

Sorry if it was unclear; I compared it to a 3x3 at the beginning and showed how the different axis move compared to each other. Keep trying and you'll get it.

What is the left algorithm?

@daniellee560

Жыл бұрын

U', L', U, L, U, F, U', F'

@jameshorton3038

Жыл бұрын

@@daniellee560 Thanks.

The algorithm at 18:24 is not working for me

@LIMITLESS_356

Жыл бұрын

Never mind it worked thx

@LIMITLESS_356

Жыл бұрын

Thx this is the only vid that helped out of all of the axis vids

Can you add timestamps in the description? The tutorial is great but I need timestamps

@daniellee560

Жыл бұрын

Yeah, I'll try to remember to do that in the future.

Every time time I get to the last part it always scrambles the cube

@daniellee560

Жыл бұрын

You may want to check out my 3x3 tutorial and watch the last step which is orienting the yellow corners. It's the same process on the axis cube; maybe it can help you see the step a little more clearly.

@JAYDENVERSE_EDITZ

Жыл бұрын

@@daniellee560 I have gan and I practice the turns on it but when I replicate it to the cube it doesn’t but I’ll try

good tutorial, don't listen to those mf in the comments

Trying to solve the cube for 2 days until i realized it had on side turned so it can never be solved. 10 hours of starting from scratch it time it came to the last detail moment

@daniellee560

Жыл бұрын

Keep practicing and you'll be able to solve it in just a few minutes. Glad you didn't give up!

@maxshir6675

Жыл бұрын

@@daniellee560 if only i wasn’t that stubborn that twisted piece would have stopped me from solving

These shape mods make my head hurt. I've yet to solve the first piece.

@daniellee560

Жыл бұрын

Stay with it and follow to steps closely and you'll get it.

I haven't watched the video yet, but smashed the like button anyway! 😁 This is definitely what I will be doing after work tomorrow. I've been struggling to learn the turning logic on this one. I think I'm about halfway there on my own, but some guidance would be just the thing 👍

help the cebter is rotaged 90 degrees

@daniellee560

11 ай бұрын

I always orient my centers at the beginning. You can try an edge swap on the face with the rotated center, then redo that last layer. If that doesn't work, you may need to start over.

I can't get passed 15:00 I always mess it up and have to start over. will update when I get passed

@bedrockcommander1924

4 ай бұрын

I made it to 17:33 I am too scared to touch it, don't want to lose all the progress.

@bedrockcommander1924

4 ай бұрын

now I solved it. finally got it back in the box

I don't know what am I doing wrong, I do the exact thing you do and it works for you but not for me

@daniellee560

10 ай бұрын

The last layer can be tricky; you have to be very careful with the rotations and algorithms. Don't give up; you'll get it!

@Kazuke-Suzaki

10 ай бұрын

@@daniellee560 thank's I do everything in the video but none of theese tutorials work, don't worry I'm not gonna give up

Vertaling Nederlands zoeken🎉

So hard solving😢

Ondertiteling nederlands

√

Only chapter 4 not clear 🥲

We all know his solving-the-cross algorithms don't work all the time for all cases, you gonna get real stuck, regardless how many times you try the algorithms again and again, you can only then scramble up the cube and do it again, hopefully you get the case you saw in the video. Please Daniel, don't waste people's time if you don't really know how to solve the Axis. You lied in the video too. You guys should go check out other tutorials.

@daniellee560

Жыл бұрын

I solve it every time using this method and I talked about the different situations that can happen and what to do in each. I don't know how that means I lied in the video. Maybe if you were more specific we might could figure out what the issue is.

@park_sapp

Жыл бұрын

Bro you gotta work on your cube knowledge lol they are algorithms for a reason, they work every time. The third layer might take a couple of times using the algorithms to get it right but saying that the algorithms don't work makes you look dumb. You don't need to mess the cube back up, you just need to do it right. The only part his setup that was lucky was the middle pieces not being rotated. You can solve the cube without having the middle rotated the right way, just like a normal cube but its flat so you don't realize they rotate on the same face. Once you get to the end and all that is left is to rotate the middle pieces, use (R U R' U) 5 times and it will rotate it 180 degrees.

@PiCyclone

Жыл бұрын

@@park_sapp ​​You know what makes a mindful tutorial? You're gonna cover up all the cases. Period. He was just going along with what's going on and that's the problem. You don't even know which part I'm talking about and you dumb brain chimed in too fast to bark sh•t. 🙄🙄🙄 I commented 3 months ago after I had learnt how to solve it. That 5 times at the end you said, you think everybody got stuck at that easiest part? And really Parker? Just perform the algorithm at 18:17 multiple times and you're gonna receive that blue & red piece in a correct place at 18:35??????? 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣 🤣🤣🤣 What if all 4 edges haven't got flipped correctly yet? That algorithm at 18:17 is used to swap the edges to the correct positions, so the edges flush with the center piece. He got lucky cos 1 or 2 of the edges has been flipped correctly already, that's why we have the case shown at 18:35. If none of the edges have been flipped correctly, you perform the algorithm at 18:17 til the rest of your life and nothing will happen. You Parker a.k.a the dumb brain better shut your mouth. You work your mouth faster than your brain that's why you make a fool out of you. And well yeah, guess you have knowledge of algorithms from a brain of a 5 year-old. 😂🤣 And for your stupid brain, "the lucky middle piece" does not exist hahahahaha. Because all the algorithms used to solve the last layer of the Axis work to rotate the edges or swap the edges but they keep the middle piece THE SAME PLACE. Learn to spell "algorithm" before being delusional enough to apply it. 🥹🥹🥹 I refuse to exchange further words with a low IQ sh•t like you. Stop bothering me with your big mouth but limited knowledge. Literally no one's impressed. 😂😂😂 F•ck off mate. 👌🏻🏁

@park_sapp

Жыл бұрын

@@PiCyclone is that why it took you 3 months to learn how to solve a variant version of a 3x3? He made this tutorial assuming that whoever was watching had started with the first cube you should learn to solve lmao if you know how to solve a 3x3 the tutorial is just a guide to help you adjust to looking at the cube on an axis instead of a flat face. It is, down to the core, the exact same cube as a standard 3x3.. for how smart you seem to think you are, I’d assume that an R U R’ U would be common sense to rotate a center into the right spot.. this cube took 10 minutes to learn how to solve and there’s no reason for you to be going at creators throats because your dumb•ss couldn’t figure out how to solve a Rubik’s cube

@mikeythor7582

8 ай бұрын

@@daniellee560sorry dude, ive tried your tutorial 5 times scrambling up the cube each time on purpose because i wasnt as lucky as you in the vid. its definetly an unconsistent technique. i like this video because it includes algorithms im really familiar with, but still not the most optimal way to solve the cube

SOS i can not understand the rotation where it starts and where to stop... So confused and disappointed!! From 2x2 to 5x5 i have no problem but this is already 2 months unsolved... 😢

@daniellee560

Жыл бұрын

I know this cube can be really confusing; remember, the centers are the small, square pieces that have two colors. Everything rotates around those. The single color triangle pieces and the tri-colored pyramid pieces are the corners. Everything else is an edge. Pick a center, and try to orient yourself to the edges and corners surrounding it. A corner never rotates while touching a center, so a rotation would be turning a side 90 degrees until the next edge lines up with the center you are looking at. Once you get used to this, it's like seeing the code in the Matrix; even with the cube mixed up, you'll be able to tell how to rotate the edges around a center. If all else fails, order a second cube and really get used to it before mixing it up; that may help you solve the first cube more easily.

The algorithms at 14:10 and 15:04 don't work, they literally only just leave the piece there and mess up the rest of the cube Edit: Tried again a while later and it literally put me back to step one. Waste of time.

@daniellee560

7 күн бұрын

Sometimes you just have to try one or the other, depending on your scramble. Also, as I mentioned, sometimes you need to do an algorithm more than once in order to see the result you want.

Confusing af couldn't understand a singke thing

how tf is this a 3x3 one side doesnt even have 9 peices theres 2 edges 3 corners and 2 centers wtf why does everh tutorial do this "jUsT sOlVe iT LikE a 3x3"

@daniellee560

Жыл бұрын

In the video I point out how each side does have 9 pieces; they're just on a different axis, hence the name.

Thank you so much!!! This really helped. I’m gonna go burn that cube alive for all my pain and suffering

@daniellee560

Жыл бұрын

Don't forget to pee on the ashes!

@doglover87

Жыл бұрын

@@daniellee560 yoo thankk youuu

Did not help me one bit

@daniellee560

Жыл бұрын

Sorry to hear that; this method works for me every time.

@CubeWorld-jf6qi

Жыл бұрын

Idk why but my red and yellow edge was flipped and I couldn’t flip it back no matter what I did :(

The worst

@daniellee560

Жыл бұрын

It's a tough cube, for sure.

OMG !!! I WATCHED EVERY VIDEO ON KZread AND DIDN'T FIND THE GOOD VIDEO. I JUST BOUGHT AXIS CUBE YESTERDAY, AND I WAS JUST GOING TO SMASH IT FOR NOT FINDING A GOOD TUTORIAL .... BUT WHEN I WATCHED PEACEFULLY, I FOUND HOW TO SOLVE IT BY YOU DANIEL !!! I CAN'T EXPRESS MY EMOTIONS WHEN I JUST SOLVED IT RIGHT NOW !!!! THANK YOU SO MUCH FOR CREATING THIS VIDEO AND HELPING US DANIEL !!!! MUCH LOVE!!!!!❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

@daniellee560

Жыл бұрын

I'm so glad to hear that the video helped you; thanks for watching!

Thank you for the tutorial. I tried to learn this from many more videos but this tutorial was the best.😊

@daniellee560

Жыл бұрын

Glad to hear it; thank you!