Instructor need to appreciate that stress is a function of strain & strain a function of displacement and dynamic displacement is obtained fron vibration/modal/dynamic simulation. Meaning, dynamic stress is obtained from dynamic simulation . & stress is the core entity everything is designed for.

Thank you Arun !!

very useful

i have created single cylinder inline engg model in creo , can we do vibration analysis of it ?

Sir, can you help me to analyze a rock breaker carrier? How to get some data of its lifetime?

Great video ! Side question: Are you using a space mouse ? If so, what model and is it worth it for a mechanical engineer as far as productivity and ergonomics ? Thank you !

@goengineer

3 жыл бұрын

Yes. This is the 3dconnexion space mouse wireless. It is very convenient to use across multiple CAD programs especially SOLIDWORKS. Thanks.

Hey Arun, thanks for the great video! I think you forgot to mention just the additional steps needed to define the properties of the harmonic study correctly.

@goengineer

2 жыл бұрын

Thank you for the feedback. There is another video on our knowledge base titled “Harmonic Analysis Advanced Settings” in our youtube channel that goes over this information. Please be sure to check that out. Thank you.

Why didn't you choose the other 4 mounting holes when you're specifying fixed restraints?

Hello! Thank you for the video. Is it possible to get a displacement(or acceleration)-frequency graph in the response spectrum analysis or in the modal time history? I see that such a graph can be obtained harmonic analysis.

@goengineer

2 жыл бұрын

Hello! Thank you for your question. It isn’t possible to generate a frequency response graph with the response spectrum analysis because of the nature of the results calculated. You are able to obtain peak amplitudes of stresses, displacements, strains and accelerations. Please check out the video titled ‘Solidworks Simulation - Shock Response Introduction’ on our KZread channel for more details! Thank you.

@user-jw8hx8uj4l

2 жыл бұрын

@@goengineer thank you.

thank you for the video. at 18:09, how could you get 40 hz from the based time analysis ?

@kothilngammaring718

4 жыл бұрын

I also have the same question.

Hi Arun! Thanks for the video! Just two question: (1) why did you choose 1G as load instead of 10G in the second armonic analysis? (2) It's not clear to me your remark from 17:59 to 18:39, I want to understand that, can you help me in to that? Thanks!

@markgiannone9728

Жыл бұрын

He explains this kzread.info/dash/bejne/lJ5rxc1mdrbFltI.html. It is because the 10G load is an impulse, the other is a 1G load at a range of frequencies.

@markgiannone9728

Жыл бұрын

he doesn't give a complete explanation but I would assume that it is because he is making some assumptions about the operating environment of the assembly

good video.

@goengineer

5 жыл бұрын

Thank you for watching!

If you know that the vibration isn't going to exceed 990 Hz why look at 5 natural frequencies

@shapuyzat

5 жыл бұрын

the reason could be because it needs accuracy for the dynamic analysis. to accuracy at dynamic analysis you need mass partisipation at least %80 for the spesific direction. so he increased the valuse for modal analysis which will be needed later for the dynamic analysis.

Thank u so much for this such a great video..it's helpful of many Engineering students......sir..... actually I'm doing a electric go kart..so I have problem with simulation..can I have u r contact details sir .??