Muy buena explicación de como utilizar el sheet metal en solidworks, gracias.

Justo lo que necesitaba. ¡Muchas gracias!. Saludos desde Colombia.

Retired over 10 years but still learning... thx for the clear explanations. I prefer to use equal angles to avoid non symmetrical parts.

Congrats! You make this appear easy ! Thanks for sharing your knowledge!

@CADCAMTUTORIALBYMAHTABALAM

8 жыл бұрын

thanks

Thank you, very helpful video !

Thank you sir, this helped me alot.

Really nice video , easy to understand. Really helpfull 😉

thank you so much from turkey. :)

Just what I needed, thanks

THANKS, YOU MADE IT EASY.

Many thanks. Very helpful

An important lecture for sheet metal basic understanding, I enjoy very much and request more piping and sheet metal videos, thank you!

@CADCAMTUTORIALBYMAHTABALAM

7 жыл бұрын

Thanks, i will try more for piping and Sheet metal,

@valentinlishkov9540

7 жыл бұрын

kzread.info/dash/bejne/eWyI1dWKqdy4fc4.html wmlwdp.com

@valentinlishkov9540

7 жыл бұрын

kzread.info/dash/bejne/eWyI1dWKqdy4fc4.html wmlwdp.com

@valentinlishkov9540

7 жыл бұрын

wmlwdp.com kzread.info/dash/bejne/eWyI1dWKqdy4fc4.html kzread.info/dash/bejne/f3iFj6Ohp9uxebw.html kzread.info/dash/bejne/fJ-WmqignpvJl8Y.html kzread.info/dash/bejne/q22Jqc98qZi-mZM.html kzread.info/dash/bejne/l5-MmJWShrqfic4.html

Very, very, very helpful. I really thank you. You are the master ;-)

@CADCAMTUTORIALBYMAHTABALAM

7 жыл бұрын

thanks.

Thank you teacher.

thanks man you help us a lot

If you evaluate the assembly for interference you find that the parts overlap. Therefore the more sections you use in the assembly, the more out of square it will be when welded. At 7:28 you can see that all of your parts are fixed, if you float the parts and remate them with a realistic none interference you no longer have a 90 degree elbow. Could be to do with the split feature adding material for the flat pattern, I'm not sure as this is the first time I've used this feature.

Thank you very much for your kind elbow production lesson.

@CADCAMTUTORIALBYMAHTABALAM

7 жыл бұрын

you are the most welcome,

thanks a lot .. for this video,, its perfect for beginers . sorry, when you select a body its a nice blue special.. how you change the colors of the selection tool.... thanks in advance Joan

Super PROJECT learn BEGINNERS sir

Thank you so much

Thank you so much 😙😙😙😙😙😙😙😙😙😙😙

Çok teşekkürler (Thank you very much)

@CADCAMTUTORIALBYMAHTABALAM

7 жыл бұрын

you are the most welcome,

thanks it was help full . just starting with solidworks need to under stand the commend and how to use it , can u help please?

Thank you

Thank you!

@CADCAMTUTORIALBYMAHTABALAM

7 жыл бұрын

Thanks for watching

thanks, but do you know how to do it with external references ?

Which software and version your using?

thank you very much

@CADCAMTUTORIALBYMAHTABALAM

7 жыл бұрын

Thanks for watching i hope you enjoyed.

how to do this if the A diameter is different of the B diameter of the circle? Always get a non-linear edge error. Ex Straight Tube 30mm to 60mm (cone shaped)

ขอบคุณครับ (TH)

@CADCAMTUTORIALBYMAHTABALAM

7 жыл бұрын

thanks for watching.

Awesome..Can please help me out to give the additional detail about the pattern thanks.

VERY LIKE

Hi..sir can you make tutorial on how to draw 2 stroke exhaust pipe using solidworks?

Nice work dude!.. I had to design the cuts in a schedule 40 pipe, and you heldped too much... :D

When I am going to insert a bend to one of the bodies, it gives me error and I can not continue with the flatten. How is this resolved?

@CADCAMTUTORIALBYMAHTABALAM

7 жыл бұрын

please mention time where you feel problems,

Hello I have one problem i can't flaten the parts( can't add bands(edge) ) If you nou what is problem? Thank you.

@CADCAMTUTORIALBYMAHTABALAM

7 жыл бұрын

restart to build and follow the steps.

5:35 in my pc split option is in grey...unable to use this feature...what should i do? plz explain

thanks

@CADCAMTUTORIALBYMAHTABALAM

8 жыл бұрын

thanks for watching.

why you selection glow like this in blue? and how you do that?? Nice video btw

@CADCAMTUTORIALBYMAHTABALAM

6 жыл бұрын

Rafou G For Real view you need professional graphics card in your system like Nvidia Quadro series or AMD firepro Series. other cards will not support real views.

@rafoug

6 жыл бұрын

I have real view but I like only the glow selection, it's not possible to stay normal view with glow selection?

HOW TO MAKE THIS KIND OF BEND BUT BOTH CROSS SECTION ARE DIFFERENT. LIKE ONE SIDE ROUND AND SECOND IS RECTANGLE

Hello Sir, There is a problem, when i choose the path it shows open group. How it will be resolved? Help me

@CADCAMTUTORIALBYMAHTABALAM

7 жыл бұрын

mention time,

@bibhuprasadsahoo2453

7 жыл бұрын

At the time of swept boss/ base

this is probably the most long-winded way that you could make a sheet metal part

@CADCAMTUTORIALBYMAHTABALAM

7 жыл бұрын

i am shows here a way of doing the task,

ოქრო!

Многогранник ?? - не, не слышали, Разрыв?! - никогда не применять! Короче результата он добился но методы...обнять и плакать, и простить.

minute 7:46.

@CADCAMTUTORIALBYMAHTABALAM

7 жыл бұрын

check previous all relation are perfect and here select outer age of any side,

you will never do this in real life. one of the reasons never make cross welds