√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@am.ahmedd

2 жыл бұрын

Save us, good people my husband and I have three children orphans needed to help him To continue and the number is present in the personal image of the KZread channel

Great video. I love watching and learning from 1A auto. Keep up the great work.

Another great video buddy. Why you dont have MILLIONS and Millions of views on this I have no clue. Keep up the great work. Thanks for your help.

The quality of the videos are getting better and better, I love the breakdowns how a part works and the camera angles great work.

Oh yea my man Len is back at it again! Nice work bruddah

THIS GUY IS ENTERTAINING. VERY GOOD TECH. GREAT TEACHER

Super informative! Thank you guys for this video

@1AAuto

2 жыл бұрын

+Luxor Slopski Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

Great video sir The breakdown definitely gonna help me out with my vehicle I am having the same issue as you were also i have a question for u you did not show bench bleeding the brake master cylinder did u need to do that or was it not needed ?

Gotta love Len.

I’m having the Same issue but can’t find a fluid leak anywhere :/

There is a Primary Piston and Secondary Piston in that master, if that master is leaking in booster the fluid is going to be suck in the engine via the booster hose..check inside of booster hose.

Great video!

Great video 💪🏻🔥

@1AAuto

2 жыл бұрын

+Miguel Gomez Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

Great video, thanks My question is when flushing the brake fluid from my friends car I cannot get fluid to come out of any of the 4 wheels, if it was only one wheel that wasn’t bleeding I know that it would be likely a bad caliper but on all four wheels, could it be the abs unit that giving problems or master brake cyclinder. Thanks

You are the man brother.

@1AAuto

2 жыл бұрын

+Jayflow23 Entertainment Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@jayflow23

2 жыл бұрын

I always do .💪🏾💪🏾💪🏾💪🏾💪🏾

Only been dealing with this for 2 years. Neat

Great vid,

Wow you're a rly good actor

Scotty, Chris, and others recommend using flare wrenches to unscrew the nuts from brake cylinders. Flare wrenches hold 5 sides of a nut, whereas regular wrenches hold 2 sides only. You did use flare wrenches too. Just noticed.

Great people 1aauto guys

It would have been nice if you would have talked about bench bleeding it. Good video. Thanks

@GMoney-B

Жыл бұрын

I am no expert so take this with a phat grain of salt, but I would think with a pressure bleeder that you might not need to bench bleed since it forces all the air through. Tthat is what it does with regular bleeding of the system but I don't know for sure though.

@getminesallday24

Жыл бұрын

You can bleed it on the car just loosen lines up and push brake till no air comes out attach lines back uo bleed all 4 calipers

This is going to help so much bro hy

That thumbnail image is priceless.

veey underrared channel, Keep it up ! :)

@1AAuto

2 жыл бұрын

+iGambled Thanks for the kind words!

nice job, you really know what you are doing

Enough with the cutaways and more with the info. Thanks for being thorough & talking fast. Good job.

My 07 Lexus RX 350 break padel sink, (not all the time and not everyday) master cylinder has been charged twice problem still exists, has been bleeded couple of time, everything else is good, no leak anywhere why do you think it’s happening? Thanks

I’m having the same problem but I haven’t got a leak and have bleed the brakes,iv tested the servo and it good, so now I’m thinking it’s the master cylinder.? My brake pedal sinks to the floor when engine it on, and it’s like you have to pump the brakes to get a hard brake.? Any information would be great

Hi. I am sensing some issues with my brake pedal. Let's say I am driving on highway and not using brake pedal for 15 mins. I have noticed that to apply brakes, it needs a little hard foot. It becomes scary at times. However in city driving like stop n go driving the brake pedal works very good. What could be the issue?

Seal failed due to contamination? Oil or old brake fluid?

Hey guys, it would mean a lot if you could help me with a question. So I have a soft pedal and one of two things, master c. or air in the system. My car has hill assist and when the brakes lock up it is the abs doing the job right? In that moment if my master cylinder had an internal leakage my pedal would still be soft because its the same as blocking the master c. outputs right? BUT, when hill assist is activated my brake pedal is rock solid meaning my master C. has no internal leakage and the problem could potentially be air in the system am I thinking right? Another thing, I bleed all 4 wheels but the pedal is still soft, could the abs module itself need bleeding? I see on youtube people bleeding the abs module for that reason. Please tell me if im thinking right. Thank you

How are you i need to know How do you remove Wire connector from the Master brake Booster pls

Very helpful video! I'm gathering information on how to replace master cylinder!

My master cylinder is about 3 months old. I went to leave work a few days ago and when I pushed the brakes the pedal went to the floor and stayed. I can't figure out what it could be. I can't find any leaks anywhere

The best brakes I know of are the titanium calipers on the Bugatti Chiron Super Sport.

I just replaced the passenger side entire hub assembly, caliper, rotor, break line, when that obviously wasn't the problem. My passenger side break froze to the rotor causing a fire. 2009 Silverado. Yup i need a master cylinder

The rust! It's crazy to live in the rust belt.

What about the fuel that leak in to the booster....you have to remove it and how.......what happens if the engine suck the fuel in the intake valve

Can't tell if you cause my issues or know them personally. The exact video I need the day my issue arises! 🤣

@1AAuto

2 жыл бұрын

+Jesse Turner Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

Where can I get the kit to bleed the master cylinder

@kevinmanning4880

2 жыл бұрын

Find another master cylinder on a vehicle at the auto Wreckers. Remove the fittings , cut the lines, long enough to bend the lines to sit in the reservoir to submerge under the fluid level to bleed the master cylinder. If buying over the counter, it should come with bleeder kit.

U can replace the seals nt the master cylinder

I'm 99% sure you only pulled out half of the stuff in the mc as in only the primary circuit piston and spring, I'm pretty sure there should have been another thing and another spring

What if there’s a stream of fluid squirting straight upon the reservoir

@1AAuto

8 ай бұрын

+Marques Wilson We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

You skipped bench priming the new MC.

My brake lines have a leak and I am still driving it.

He should start his own show for himself He could be another Scotty Kilmer!!!

In this video he sounds like Chris fix doesn't he?

8:00 not true. If you loose brake fluid in one side of reservoir, the pedal will still sink. The air from one side will get into the other.. air can get past the MC piston seal. A true safety measure is dual master cyl. The only way to keep both separated.

oh no!!!!

1

Why didn't you show, or at least mention that you bench bled the master cylinder? Trying to bleed a system with an empty master cylinder is infuriating

Replace Master Cylinder and Booster. Attempt to fix this rusty crap will come back to haunt you later just when you need them the most. Go new on the Master Cylinder, do not trust remanufactured parts.

You need to 1. Stop doing acting scenarios you can't act. 2. Just do the install, we don't need a scenario and a story behind it.

What I get from this Video is the company you work for doesn't pay you enough money to buy a better truck .U have communication skills get paid for it .

PLEASE - SLOW DOWN!! I'm an old lady that needs time to process what you are trying to say.

Save us, good people my husband and I have three children orphans needed to help him To continue and the number is present in the personal image of the KZread channel

Thank you

I've seen 80 year old cars in better shape. gross!

Quit yelling. Good video otherwise.