I started watching this video in 2017. Almost done, can’t wait to see the ending in late 2019.

@thanhclips

4 жыл бұрын

I wasn't the only one that felt this way. Omg...

@reggietjevans

4 жыл бұрын

Lol RIGHT!! Why is he talking so slow??!!!

@mjktrash

4 жыл бұрын

2020 now and it's still not done...

@EternallApprentace

4 жыл бұрын

I put it on times 2 speed ahaha...

@MajorC202

3 жыл бұрын

Now, that was damn funny.

Pro tip and how I think 99% of these can be fixed. Simply take out the white "plug and flush out the hole-pipe-channel. When I inspected mine it was clogged with half congealed detergent. Flushing and cleaning it and problem solved. This is not a complicated part, so unless your detergent tray is warped, I'd think it should last forever. Just clean it.

Although it was a long video for a simple solution- I really appreciate it! This is exactly what was going on with mine. Wouldn't have known I needed a new one if it wasn't for this! PS: The fact that this video has 280,229 views, you've helped a lot of people Mike! Thank you!

Thank you!!!!! I truly appreciate the detailed illustration! Saved me from making an unnecessary claim with my home warranty company!

Wow. This fixed my problem!!! I didn't even know that there was supposed to be a cap on the soap tray! Thank you. Thank you. Thank you!

Thanks so much! Relieved to know it's not that big of a deal and an easy fix! I'm starting to get sick of dumping the water out which is always full after EVERY cycle! I'm bummed because we've only had it for 2 years but hey, at least it's a $10 fix. Thanks for the advice!

Thanks! I finally understand how those trays work. Solved our problem quickly.

Never had a washer with this cup before I moved into my current rental recently. It was filling up to the top after a cycle and wasn't sure if this was normal. Turns out the cap is missing and I know that now thanks to this video. Thank you

Thank you Mike! I had this very problem. Began to tackle the problem and first stop was your video. Simple. Solved! Thank you! Andy

I ordered this part online for less than $15 verses $50 @ the local parts house. Much to my surprise my problem of detergent not dispensing was resolved. Repair estimates locally were $79- $128 plus parts. This video saved me a bunch! Thanks a lot!

@sandraDeveze

6 жыл бұрын

Steve Hilliard I have the same problem, the detergent remains mixed with water during the wash cycle, being wasted during the rinse cycle.

@stevehilliard1495

6 жыл бұрын

I have wondered if you drilled the white tab out 1/16 or 1/8 th inch bigger if that would fix the problem & be cheaper yet?

@georgepetrillo7316

Жыл бұрын

@@stevehilliard1495 Don't even need to do that. Just take the white t-shaped part out and clean the gooped up soap from the passage and the drain hole on the bottom of the tray. Literally takes 3 minutes.

@kristinesharp6286

Жыл бұрын

@@georgepetrillo7316 I hope it worked. This was my problem. Gunk in that white thing and around the ring on the blue. Water didn’t go down. I took it apart and washed the gunk out and now the clear water is going down. Nice to fix the problem found out after 10pm with this video. Still might get a replacement part.

@kellyannlacasse3179

9 ай бұрын

My washer is one week old and it's doing this.

Thank you for solving my washing machine problem. I have the same issue on my LG washer which I was scratching my head and couldn't figure out.

@HankinsMT

7 жыл бұрын

Glad to hear this helped out ... Mike Mikes-Appliance.com

Thank you. Helped me a lot by confirming how it drained through the small tower hole things (whatever they're called).

August 2023 reporting in - thank you! Echoing others, I didn't understand the siphoning function of the white tab either. I appreciate your taking the time to explain it thoroughly.

If you clean and it fails try this... I cleaned up everything but still no quick drainage, in fact no drainage. After much experimenting I determined that the white dispenser has to be pushed down into the blue cup just the right amount or the siphon fails. Push down white piece too hard and fail and likewise too loose fail, with a little work you'll get it just right. Yes, slow video but still very informative, especially the siphon info. Appreciate.

@staticklingon2182

3 жыл бұрын

Wow thanks! I will try this, too. Good information.

You are the only one that explained the water siphoning property of the dispenser. Thank you! How about the bleach dispenser behind the soap? Mine doesn't dispense at all. Frank

@nancyp7301

5 жыл бұрын

take the drawer out and look at the water jets, they are probably all gunked up with mold.

Perfect. Thanks for the vid. Was just what I was looking for!

@HankinsMT

6 жыл бұрын

Glad to hear and thank you for the positive feedback!!!

Been looking for this cup with no hope, thanks to you i know where to bigin from. thanks for the part No.

Thanks so much for the positive feedback!

@staticklingon2182

3 жыл бұрын

And lots of negative haha. But this did still help me. I now know where to start before I throw this expensive thing out in the yard. Thank you.

Thank you. This was very helpful!

Thank you! I thought the problem was so much bigger!

Thank you so much! I did exactly what you said and it worked! 👏🏻🙌🏻

Every single LG appliance I've ever purchased has been an overrated piece of garbage. Short answer solution to any LG problem? Have a friend over to help you load the washer into the back of your pick up truck and drive it to your local garbage facility.

@hopenoneya8161

4 жыл бұрын

Agree, crap products, and the flat screens are the same.

@kristinesharp6286

Жыл бұрын

Kenmore washers are really LG with the Kenmore name. Like is not that simple. That said I hate the seal on the front washer. I hate we need another product to clean the washer. They are all like this. There is no escape.

omg so easy and quick answer for the problem. Thank you

Thanks for educating me about the water siphoning properties of the dispenser cups. However, after cleaning everything thoroughly, I finally learned what is causing water to remain in the cups after a full cycle! Check the water pressure at the main water valve to your house. It should read somewhere between 60 and 75. (If you don't have one, you can purchase a pressure gauge on line or at any hardware store for about $6.) My valve needed to be replaced, and then was set at 65 psi. Not only does the water no longer make squealing noises as it enters the washer, the cups are no longer filled with water after a cycle has completed! Voila! It's all about too much water pressure roaring into the cups!

@spaceedementia

4 жыл бұрын

Mine made that awful squealing noise before the cup started not using the detergent. I'll see if I can look ino that. Thanks

@roberttoews2775

Жыл бұрын

I'm glad you found your solution. However, it didn't apply in my case. Our water supply is well dourced with a pressure switch set to operate between 30psi - 50psi. It is gauged and monitored. This hasn't changed, but after 5 years of service, water is now left in our LG dispenser (all three compartments) even after a thorough cleaning and replacing one part. Still investigating.

Thanx so much! I had no idea how the water gets out of there!

@KewlQT

3 жыл бұрын

Me too!

"Once again... ...real quick" OMFG

Very helpful solved my problem and $150 technician fee.

OMG! This video was painfully SLOW! When you poured a 2nd cup of water in the cup I just about lost it. This 9 minute video could have been done in 3 minutes! BTW, how about pouring hot water in the cup to melt away the detergent buildup and clear the residue clog?

@fgarriel3

5 жыл бұрын

the water will evaporate by the time this is done

@95countach

5 жыл бұрын

@@fgarriel3 LOL!

@rickdavila6969

5 жыл бұрын

I want 9:03 minutes of my life back. This video could have accomplished its objective in 10 seconds... 15 tops. Watch it if you're having trouble falling asleep at night.

@andymonte3189

5 жыл бұрын

OMGosh..ya know!! you took the words right outta my mouth!! OYE

@sarahamilton3234

5 жыл бұрын

Same.

In my experience, it's always been the cold water valve causing the box not to dispense.

Thank you for explaining the siphoning process. Never could understand how the system works. I damaged the tray, probably because I didn't know that the release button would aid in the process. They've discontinued the tray for my model (WM2277HS). Rolled the dice on #PD00034805 and found after swapping the face plates, it was a match.

Thank you for sharing your knowledge, what about the bleach dispenser, I just found it full of water, my washer is just 2 months old.

This really helped me. Thanks 👍

I have been dealing with this for a while. I have cleaned and cleaned, and just today finally took the top off my washer to get into the entire soap dispenser and clean it, because there really is no other way to clean out all the tiny holes. At any rate, my issue is of course standing water, but also, after I do a load of whites and put bleach in, the next load of laundry, will get bleach spots everywhere from the standing bleach left in the tray! So, it's obviously not just clean standing water sitting in there. We have destroyed a lot of clothes unfortunately due to this. So..... what I want to ask, is, why did the original soap dispenser cup stop working? And why is a replacement better? Also, how do I ensure all the bleach is being used?

Thank you for posting this video. Good to know that this isn't a big deal or a big issue to worry about with the washing machine... but, I may buy a new liquid detergent dispenser if I get tired of dumping the extra water out. Great demonstration!

Thank you very much. Mine was clogged and I cleaned the blue cup and white contraption. Now it drains clear water. Also found PART number. Will keep an eye. The question is why is suddenly clogging. Part, change in HE tide, just needed cleaning? I hope it is the cleaning part. But honestly it is after 10pm and so glad I could problem solve it with the video. Clothes starting to smell out of dryer. And a few full dispensers of water. Something definitely off.

for front load it's ok to put liquid detergent inside the washer with all the clothes right? will still clean great like in the detergent drawer slot spot?

Its normal for all compartments to have some water left in afterwards. If its full to the brim with water then theres a problem. So you're good👍👌

Thank you!!! I thought it was something I was doing wrong.

Thanks Mike had same issue but it was draining to washing unit and building water up while not in use.. Smelly odet with wsterjust sotting in the unit while not in use

GE Front Loader Model GFWR4805F0MC. The fabric softener cup does the same thing. It has been replaced 3 times. It either works, clean water stays in cup, or a mix of softener and water is found. Many times it overflows and runs down the front of the machine. The only fix was to stop using fabric softener and switch to dryer sheets. I would like to fix this problem. Thank you.

All my cups in my washer do that except for the softener cup in this machine is new !!!!! Ughhh 🥺🥺🥺😩😩😩🥺🥺🥺 thanks for the video !

How about the easy solution? Cleaning out the gunk in there with a toothbrush... sometimes you neeed to do with all the containers and the drawer itself. Seems like I have to do it every year or so... what I want to know, is how do you know if there is a clog or forming INTERNALLY or pump going bad? There are some times when we run the washer through the cycle, and the soap is still in there after. ALSO... our fabric softener one doesn't work at all. We went to strictly dryer sheets

Thank you!

Thank goodness for KZread settings where I can play this at 1.5x speed! Even then, YAWN!

@EFCONNECT

4 жыл бұрын

Great information. Both what was provided by the content provider and setting the play speed suggestion. I used 2x and it worked perfectly.

@EricCDixon

3 жыл бұрын

Thx 4 reminding ME!

Ok, from what I'm seeing, these things do n.v t go bad and it doesn't get clogged. The problem is like he mentioned the machine isnt level.

@KewlQT

3 жыл бұрын

Not the case. My brand new LG Steam washer was dead on level. Front to back, side to side and diagonally. The problem was there from the very start and LG customer service is no help whatsoever! Waste of money buying LG products.

Thanks, nice to know this. However it should NOT of been happening with my brand new, top of the line, LG Steam w&d set right off the get go. I tried all the suggestions in the manual. LG customer service could only suggest the same pointless steps listed in their manual. Why doesn't LG know about this? And why didn't LG offer me a replacement soap cup right off the get go!?!?!! Solution buy a different brand next time.

How long should it take for the dispenser to be out of soap when you put the machine on.

Thank you 😘 Mine doesn't drain every time and soap is left, same work water so new one... Thanks agian

@Kyogen.

5 жыл бұрын

R/ihadastroke

Thanks for the tip. Im gonna try and clean it, How about bleach and softner? Is there a clean out there?

@staticklingon2182

3 жыл бұрын

I'm amazed there isn't some sort of kit or cleaner for this exactly. Such a small problem for such an expensive machine.

I have a brand new LG washer pictured here. It did this after the test wash. It has done it every time since. It was purchased new and professionally installed. Why would this still happen?

Good to know the replacement part is cheap but would have expected at least an inspection of the drain hole for obstruction

Thank you Sir, I had a problem on the rinse/conditioner side, I removed the newer style holder and discovered a huge build up of conditioner, I also put he soap side as a pre caution in my ultrasonic bath that I use to clean my eyeglasses to remove any build up on the soap side.:) All is well after a little cleaning, er maintenance...

Thank you SO MUCH

Hi there. I know this video is older, but hoping you still monitor this channel. This video was so helpful. Thank you! The liquid bleach and softener containers behind the detergent container hold water in my washer. Would the fix be the same - replacing the trays?

my softner cup holds water and stays full of water. How do I fix it or clean it?

What do you do if the Bleach container is full of water after the wash is done?

After a wash cycle if the detergent is gone but the dispenser is filled full with water does that means the detergent reached my clothes? Are my clothes still washed and cleaned?

I've discovered that the softener dispenser section is dispensing into the wash cycle instead of the rinse cycle. Has anyone else had this problem? I was thinking of simply lowering the water pressure is a machine. It seems the water pressure might be emptying everything out of the tray at once and that lower flow rate might keep the fill water confined to its intended section.

Much better to use powder anyway. Powder doesn't gum up the machine like liquid, or cause smells that accumulated scummy liquid residue can do. Powder is also much cheaper (at least in the UK) and more environmentally friendly as it comes in card rather than plastic packaging.

Do you have a fix for a Maytag 2000 series fabric softener ?

Six minutes to say replace the container. My wife's first labor was shorter than this explanation...

My issue is the two trays behind the one that you removed in the video are gunky. I cant seem to remove them so I can clean them properly. I have run the washer with a cleaning detergent and that seemed to clean the drum but it did nothing for the trays. Any suggestions on how to remove them?

@nancymcnally7849

5 жыл бұрын

Press down on the blue part where the bleach is and pull the entire drawer out. Trust me. I just did this and almost died when I saw what was UNDER it.

@SmokeyBlueDude

5 жыл бұрын

thanks:) I managed to figure it out after lol. I agree it was quite disgusting.

My LG is brand new and does this so I don't feel that buying a new cup would make a difference. Has to be something else. Also, why would you have to go pour the water down the sink, can't you just pour it right under where the cup fits in?

Wow this washing mchine is amazing 😍 in America everyhings is big

@robzero6751

5 жыл бұрын

It's because our clothes are bigger!

Our GE has started doing this, ever since we turned up our water pressure. It was working before. Don’t think our cup is removable

To you complainers - nobody forced you to watch the video all the way through. Thanks for the info, HankinsMT!

On my washer when I put the soap and the fabric softener leaks it to the washer ? What am I doing wrong anyone!

All this for a "replace"? I thought I was on .25 speed. Then I looked... nope. Sped it up to 2x speed, and it sounded pretty normal.

@RonPaul42069

5 жыл бұрын

Damn, that's a good idea. Thanks.

no no no no, waste of money. Use a degreaser cleaner, soak the tray fifteen minutes, scrub with small brush, rinse and you're done.

@HankinsMT

7 жыл бұрын

your correct many times cleaning as you mentioned works great but I have had a few jobs that simply does not work and cup needs replaced.

@taihsu2173

6 жыл бұрын

if it isn't sealing couldn't I use plumbers tape in the meantime?

My problem is the bleach starts to drain before I even push the dispenser back into the machine :(

My LG washer started doing this after only 4 years. I've tried all the other possible fixes and am willing to try this. But, what I want to know is what the heck causes this? Two plastic pieces with no discernable wear. They just stop working. Why? It's kinda crazy.

You might not have to buy new despenser,mine had a piece underneath that needed cleaning, the holes were plugged up,try cleaning it first. The detergent will harden and get in the holes.

Thanks for the video. I am trying to use LG washer in my new house. the machine dispenses soap into tub, but does not fill tub with water. it also stops at rinsing cycle giving me 0E error. is this something to do with dispenser?

@HankinsMT

6 жыл бұрын

Check for a clogged water pump filter or bad drain pump (bad drain pump motor).

@taroudant1421

5 жыл бұрын

the HE machines actually weigh the tub before dispensing. So I add a gallon or two of water first before starting the machine. this way the machine actually adds a bit more water based on "weight" in addition to the water weight that I put in to begin with. these HE machines are designed to run on just a tiny amount of water !

The point is, how do you not to get the new one?

8 minutes to tell the fix is to “buy another container”.

@vadatimberlake5958

3 жыл бұрын

If the first box assembly looks clean and not broken, why do I need to buy another? Why would the water be present if it isn't broken?

@staticklingon2182

3 жыл бұрын

@@vadatimberlake5958 I was disappointed in all that rambling that that didn't get covered. What's actually wrong with it??

@kristinesharp6286

Жыл бұрын

Actually he said to test it with overflowing the blue thing with water, if it didn’t drain he showed how to separate the two pieces, clean then and try the test again. He then told how to replace the blue thing. 350,000 near watched it.

Do you know why with the LG washer and dryer combo ventless, the clothes doesn't smell good? I love the clothes when they smell like fabric softener. And no matter how much fabric softener or dryer sheets I use the clothes still doesn't smell like fabric softener.

@rh4584

6 жыл бұрын

michelle sevast kzread.info/dash/bejne/aKaIs82Lp8mYqM4.html

@rh4584

6 жыл бұрын

michelle sevast that goes for lg washers and dryers too

Thank you

We have one of those. A very odd design. I still wonder how the liquid is removed from the cup as the hle is at the top of the cup. I thought for a siphon to work you needed water at the end of the hose/hole.

@vpelss

Ай бұрын

So now that I know it is a siphon device, I believe my issue was caused by soap/sediment build up on the drawer just below the soap cup.We have hard country water. Maybe some CLRr would be a good idea.

But what was it about the old one that caused the problem???

@KewlQT

3 жыл бұрын

Good question. I want to know since mine did it since day 1 (so it wasn't worn out).

That is so unselfish of you to share this info. God bless you.

Hello, my soap doesn’t even dispense at all. Still full when wash is over. Full of soap. Any ideas? I’ve been just dumping it strait without the cup. I see very little water spraying out when it’s washing. Just trickles from the back when the tray is removed.

@jaime41823

3 ай бұрын

Same issue. Cleaned everything. Our LG is only months old.

I heard something pop on mines when it was spinning, now my drum is scrubbing when it turns. What I need to do? Or what’s wrong. I have the same washer

What if all three containers have water in them?

How do you remove the entire tray to clean all the containers out? Thanks

@anitayantz3324

10 ай бұрын

Don't know if you still need an answer to this question but I'll put it here in case someone else does. There's a small lever on the cover of the back left cup (in my washer and the one in this video) that says "PUSH" and it has a little indentation on it. You hold down on that spot and pull the tray forward. That button releases the catch. Hope that makes sense, I don't know all the right terms to use.

I wonder if he charges by the hour

Great comment thanks for your help and have a blessed day

Omg just take that white thing out of the tray bcs it’s probably blocked and just clean it. It happened to me

Change playback speed to 1.5. You're welcome.

My problem is that detergent is left behind as well. I washed it including hole with same issue

this video should be no more than 90-120 seconds

I have a brand new Maytag that leaves water in the fabric dispenser, sometimes the detergent dispenser. Had almost the same one, same dispenser and had no issue with it. it's not a big deal but it's annoying.

my top loader washer is leaking from the dispenser, how do I fix that? WT7200C

@portiagoss4943

5 жыл бұрын

Vanessa Carrion Hi. I’m having the same issue and I read on a forum that there may be calcium build up in the inlet valves causes the water to leak in and that CLR will clear up the issue. Please update me if you find any other solutions. Thanks in advance.

I have this problem but in the softener tray and that one doesn’t come out 😡

@deannasanto3656

4 жыл бұрын

JASON PALERMO me too

A classic example of over engineering for the purpose of bottom line profit. The simple and elegant solution to this issue is to simply remove the dispenser and pour your detergent (not bleach or softener) into the tray. Problem solved.

@notafanboy250

5 жыл бұрын

Your approach works but it's not really a case of over engineering. The siphoning system is used as a simple means to be able to time the dispensing of liquids in the different trays. In my washer, there are three separate water ports that dispense water separately into the different trays. By filling each individual tray with water at different times, you can fill the trays at the beginning of the wash cycle and "set it and forget it" instead of having to go back to the washer several times throughout the cycle to add liquids at appropriate time in the cycle. Without siphoning, your liquids would get dispensed immediately.

allllll this to say get a new one or deal with it, no big deal???? hahaha wow.

Mine is brand knew and it fills to just about the fill line and it’s either in the detergent tray or the tray beside it ..and they tell me this is normal ..lol never buy a LG product again

March 1, 2023. I'm sure the ending is almost here. Sheesh. This video could have been done in 30 seconds or maybe 1 minute max.

At what point does the useful information start? Five minutes in?

Mine is holding the softener. How do i fix that?

@KewlQT

3 жыл бұрын

I wonder if it's as simple as a buildup clog?

His solution @ 6:00 was to buy new cups