So you bricked your TBS Crossfire Tango Mambo Tracer? Now what?
Жүктеу.....
Пікірлер: 169
@amen_ra69262 жыл бұрын
I love all the out takes. I just had to laugh because it reaffirms that even the pros have the same frustrations, have the same reactions, and utter the same expletives 😂🤣😂.
@dr0n3droid2 жыл бұрын
Had TBS done a better job of getting the word out about Agent X issues, this wouldn't be such a thing. It caught me too.
@MoppelMat
2 жыл бұрын
Their hp still promotes the agent x …. Dumb
@13FPV
2 жыл бұрын
Keep an eye on this channel, the man himself explains all known issues and the solutions here in detail. kzread.info
@MoppelMat
2 жыл бұрын
@@valentin.kompatscher they show „use agent m“ if you try to bind …
@jessiahd.6143
2 жыл бұрын
Their software Quality Assurance is non existent. Most companies will pull bugged software down from production. It shows that there's a big miss somewhere in their company.
@OCD_FPV
Жыл бұрын
@@MoppelMat i think his may be my problem.
@willsintheair2 жыл бұрын
I've been flying FPV for years now and sometimes it upsets me that things are more overly complicated today than they were a few years ago. All the bugs, incompatible parts, jenky firmware issues etc make it extra daunting for new pilots that actually want to build. something. That being said....there are MUCH better BNFs now so that's good. I've often said that FPV is full of companies that sell us products that are essentially in BETA and we're the testers.
@MrSabram07
2 жыл бұрын
Thank you
@ForwardBias
2 жыл бұрын
Hasn't Frsky been doing these incompatibilities on purpose for a few years now though? At least between receivers and transmitters?
@willsintheair
2 жыл бұрын
@@ForwardBias They're one of the worst ones. I've been on crossfire for years and my last FrSky TX (QX7S) needed to be opened up and have a extra chip added just to make crossfire work.
@emeraldcitycreative6892
2 жыл бұрын
Yes! TBS is supposedly the market leader in rx, but their products are so counter-intuitive, so operator- UNfriendly, it's ridiculous.. Seems like they're purposely making things more difficult for us mere mortals.
@remizik2 жыл бұрын
Just got a TBS Tango 2 last week, flashed it to the last firmware with Agent X directly. Couldn't bind. But the screen of the Tango 2 told me to use Agent M ! So I did, reflashed, and it worked and bind in the end.
@ghall052 жыл бұрын
0:09 THIS has been my entire crossfire experience from day 1! Nothing but frustration! But thank you for making this video JB!
@cynthiaanger1137
2 жыл бұрын
my whole fucking fpv experiance since day 1 in 2017
@MrSabram07
2 жыл бұрын
I think everybody interested in starting this hobby should watch this video and if they're not interested in dealing with stuff like this should turn and walk away
@user-gj1lu9gn3z5 ай бұрын
you are THE. BEST teacher. EVER. man, i HAD to donate you something
@pacificnorthwestpilots60502 жыл бұрын
ELRS😃
@MCsCreations
2 жыл бұрын
Right?
@kingofjesters23
2 жыл бұрын
I use ELRS on my Mambo! Works great! I wonder what Trappy would say about this. lol
@willsintheair
2 жыл бұрын
I'm deeply invested into crossfire so I don't use ELRS but would 100% suggest it to any new pilots or anyone wanting to move up from 2.4. Such cool stuff going on in the ELRS world!
@MrSabram07
2 жыл бұрын
There's a lot of firmware updating and flashing with e l r s and it's real easy to make a mistake doing that. You're working with Bin files updating Lua scripts. Elrs can be no walk in the park either. Unless you're already great at flashing firmware
@slamonfpv2 жыл бұрын
I have no idea what I'd do without your help jb you are a god send thankyou now and in advance for when I have to do this again tomorrow 🙏 ❤
@mason89972 жыл бұрын
Just another fine example of why I'm never disappointed with being a Patron! Thanks JB!
@kantony66942 жыл бұрын
KZread needs to include a 👍👍 double thumbs up for these kind of content, thanks JB.
@micsherwood49302 жыл бұрын
YOU ARE MY HERO! My Mambo did this just a few hours ago! Where did you go for information? TBS should be paying you for this video! I am so F'n pissed with the lack of their support. I tried to follow your SD card recovery but It didn't work for my Mambo, so now i have to spend the rest of today entering all my models back in. First, I have to figureout how to get it to calibrate correctly.
@bradserls78753 ай бұрын
Used this video twice now.! Thanks you, One very happy Patreon member :)
@chadhilburn56872 жыл бұрын
Got me too. For about 2 days straight I regretted updating the firmware. I figured it out by reflashing old firmware and then moving back to the latest release.
@MerinKumar2 жыл бұрын
I had done all these on ,,🙁my Tango 2 and tracer a month ago ... Never thought I would have these issues in TBS
@LalapopApple2 жыл бұрын
Agent M on my Android Smartphone works All the time... At Second try 🤣 Thanks, i Hope this helps a Lot of ppl ... My Tipp, hard reset (Emergency Recovery) at least once Ur RX before try Binding and updating
@aphinion2 жыл бұрын
Glad they didn't break the bootloader yet :P Tried to get a DOA CRSF rx to work (radio seems dead inside) and tried to get it to bind by cycling/downgrading firmwares of RX & TX. Ran through every single issue you showed here. "bricked" tx, not relinking after flash, having to flash twice, having to rebind everythnng, rx recovery & golden firmware, etc. Took me hours to realize that one RX might just be dead and get everything back to work after… and a ton of mental energy not to throw that shit into a wall. What happened to TBS being always rock solid… x.x
@creaturefpv2 жыл бұрын
Thx for the info man. The hobby would be a nightmare without you and the others that help everyone else out. Good work man. Keep it going.
@MrSabram07
2 жыл бұрын
Absolutely I mean how would you know this if Josh didn't show this video
@emeraldcitycreative6892
2 жыл бұрын
Oh it's still a nightmare lol..
@RadBeardFPV2 жыл бұрын
I had this issue like a week ago and went nuts!!!!! I’m so glad I got it working and this is what someone said on discord
@emeraldcitycreative68922 жыл бұрын
Thank you! I was just about to order a new radio.. and NOT a TBS one, that's for sure
@MCsCreations2 жыл бұрын
Awesome! Thanks a bunch, Joshua! 😊 Stay safe there with your family! 🖖😊
@colbiecallister23072 жыл бұрын
I’ve run into some confusion in the past, good information! I don’t know what we would do without you man! 🙏
@sherwinS_132 жыл бұрын
Great video...finally graduating to a Tango 2...glad I saw this video my Tango is arriving today, as a matter of fact.
@InTheWoodsFPV2 жыл бұрын
Lol. I just went through this tonight with a new rx and tango 2. Finally figured out out. Then I go on KZread and see this video. Would have saved a couple hours of frustration.
@MrSabram072 жыл бұрын
Lol there's always something with this hobby, always. I had an issue connecting to Wi-Fi on my new Express lrs. And I was just thinking to myself how much easier crossfire was and now there's this. Seems like we're beta testers
@JonE5FPV2 жыл бұрын
I realized its largely due to chip shortage, hopefully things can get all fixed soon, The old RXs' that require no update have started becoming so sought after, since people are worried about flashing and crashing.
@jc.cantrell2 жыл бұрын
Thanks! Was very frustrated when trying to bind two of my crossfire quads. The recommendation to use "Agent M" and to activate the "Golden Firmware" (with the comment that sometimes you might have to reboot or redo it) was the key to getting me in the air.
@bergermanfpv Жыл бұрын
You are the man JB. Thought I bricked my Mambo, you saved me once again 😁✌️
@rincewind6662 жыл бұрын
learnt that smoke stopper trick from you a while ago, kudos for it, it's so useful :) especially with my toothpick motors where the screw holes become loose if i move the screws a lot
@JThemelis Жыл бұрын
I experienced an interesting phenomenon in the last day, resulting in 2 issues, only one of which has been resolved, the other i'll attempt to address later this evening. 1. After a month of not flying anything I attempted to fly yesterday (8/31) with a Tracer equipped quad. I had used this quad before heading to EU for vacation, and expected no issues. Well, I tried to arm and realized nothing was happening. Upon further inspection, the rx had a solid red LED; following the bind procedures, none worked and i couldn't update. So, I updated my Tx tracer module and wasn't able to connect or bind still. For this, I'll need to use the emergency recovery process, but this issue led to #2. 2. I powered up my Mambo, and still, no dice. I couldnt bind to or update the Rx. I plugged in another Tracer quad, and it would connect to the Mambo, but not my Tx module. moving on, I decided to update the mambo; in the middle of the update, I received an error and it bricked the tx. I could not start the tx, the computer wouldnt recognize it, and if i plugged in, it only showed the charging battery sequence. I followed along with every video, advising to hold down the page button while plugging in to activate the bootloader mode. I did this, tried to update firmware, and every attempt failed when restarting as it required a linked device. After hours of trying, i gave up and decided to dig some more, ignoring every video out here. Then , i found it - hold down the MENU button to activate TRACER Bootloader mode - THIS allowed the Tracer firmware update and 'unbricked' the device. Upon completion the tx started up right away as per normal, and i was able to complete my updates. I think a blip in my home internet connectivity may have caused the initial failure. I still can't understand why the Rx's failed to connect prior to any update activity. Hope there's a nugget of help in here somewhere for someone else!
@90s_sascha2 жыл бұрын
Had same Problem with the app. Web based agent worked for me. Had to Troubleshoot this on my Own. Also the radiomaster sorro has a bug with crossfire you cannot connect to rx menu to setup your channels. Sometimes it works sometimes the lua will not work. I connected the crossfire modul and the copter to the pc and set up all the different settings with my Computer. That worked for me
@jessiahd.61432 жыл бұрын
Thanks buddy!!!! Seriously appreciate your videos!!!!
@alanwood1592 Жыл бұрын
Thank you, a great big thank you. I most definitely learned something.
@markedwards41692 жыл бұрын
Thank you Joshua!
@kinzokushirogane15942 жыл бұрын
Hahahahaha man the beginning of this video. Those outtakes are exactly my experience. Everyone always saying crossfire is super hyper easy. Nah man. I had so many issues that even Frsky:s stuff seemed easy and reliable.
@janlencer2 жыл бұрын
Mr.Bardwell you saved me
@MadManFPV2 жыл бұрын
Another great video! Great job.
@jeromeguibert2623Ай бұрын
Thanks you so much! You saved my day.
@FlyZoneFpv2 жыл бұрын
Thanks Joshua 👊🏻
@roman87472 жыл бұрын
Thanks I just flashed the new version to a receiver and module. I haven't had any problems though for now. Didn't know anything about this so it's great to know if it comes up.
@andresssather5521 Жыл бұрын
THANK YOU
@mattgu43312 жыл бұрын
thanks
@zarsterАй бұрын
Saved my behind
@jacovanderwalt14975 ай бұрын
safed my tango 2 pro today tx
@jjll123412 жыл бұрын
this caught me also still cant figure out how to get everything back
@JohnCuppi2 жыл бұрын
From day #1 of owning the Tango 2, the crossfire ecosystem has never been trouble free for me. Tango was shipped with a software bug out of the box making it necessary to open and unplug the battery. I almost returned it right then, then a few days later the power bug was acknowledged and fixed. From that point, binding bugs bit me with every update. I suffered from the "half-bound" firmware bug that you called out on last year. It was never fun knowing that 50% of my xf receivers would fail to update OTA, and require a reset using emergency recovery to fix. Thanks for the video on this crossfire debacle... I've been seeing people complain about crossfire failsafes for a while with 4.3, failed flashes, etc, this sums it all up perfectly. I'm going to hold off updating for as long as possible.
@gmivisualsjason37292 жыл бұрын
Before the issues with agent X I was getting frustrated that I had to regularly (in order to keep upto date with the TBS updates) put my nano receivers into emergency mode to get them to work. Personally I've found Elrs to be much easier.
@cacamacaaa2 жыл бұрын
Nice video Joshua, however if you have a bricked radio like mine, and do the flashing, when the radio restarts, you can’t just turn it ton like you did in the video, because it’s bricked, so it does not flash
@JoshuaBardwell
2 жыл бұрын
After flashing in bootloader mode it shouldn't be bricked any more. Or am I misunderstanding....
@cacamacaaa
2 жыл бұрын
@@JoshuaBardwell well, that was not my case.. kzread.info/dash/bejne/qYijuaOIo7a7c5s.html jump directly to min 02:20. However TBS was kind enough to send a replacement
@paulfpv
2 жыл бұрын
@@JoshuaBardwell There are cases, like mine (and CTFpv.. and Aarons14bugs) where this doesn't work. This is what I sent to TBS: kzread.info/dash/bejne/oJqAq9xum9rblsY.html ...and TBS is avoiding to acknowledge the issue is happening to some customers... and it's days I'm waiting an answer to my last email. I'll love to send you the whole email exchange so you can understand better what is happening with TBS support. Are you interested? How can I send everything to you?
@itshd74052 жыл бұрын
I recently went to update my tracer nano tx and agent m gave me all kinda of problems 🙃 after spending 3 hours working on something that should have taken 15 minutes, I've decided I'm gonna switch to ELRS
@MrSabram07
2 жыл бұрын
You can still have problems with ELRS. I recently spent two days trying to update and connect an ep+1 receiver. Turned out it was my PC, who knew? My PC worked with my TBS and Flsky receivers
@itshd7405
2 жыл бұрын
@@MrSabram07 yeah ,I understand that but the purpose of spending so much on something like tracer is to have a simple and seamless experience. If I have to sit for hours fiddling with something trying to get it to work, I'd rather be working with something new and subjectively better
@Bobikska1
2 жыл бұрын
TBS is crap if you want flash firmware i got Tango 2 and its imposible to flash it no mather what you do…. i spend like 4h and folow every steps gues what nothing. TBS radios are junk but TBS make great VTX no radios… Still use my Tango but looking to switch to ELRS
@CloneTechDrones-6192 жыл бұрын
The chip shortage caused all new crossfire receivers to be shipped with new version 6.10, but my crossfire TX module won't bind with any receivers when updated to version 6.10. I'm still using version 3.27 and never encountered failures so I just choose not to update since firmware updates are a mess!!!
@toddbeal43732 жыл бұрын
Hell you should have showed all these ppl the video I sent you on fb about what mine done, with the warning crap and if I flip a switch it goes away. Still haven't figured out why it does that
@mitchwyld68382 жыл бұрын
I liked in case I get bricked in the future, helps us both this way 😀
@JHB1412 жыл бұрын
This is why I've learned, the hard way sometimes, that if everything works, do you REALLY need to ALWAYS update to the latest firmware ? Nah, bruh, I'm good.
@MrSabram07
2 жыл бұрын
Lol exactly
@slapstickfpv2 жыл бұрын
Everyday is a school day when watching bardwell
@zorianfpv2 жыл бұрын
Wow! This video is long enough I'm glad I didn't brick my crossfire!
@josephduke4502 жыл бұрын
Croosfire reciver caused my computer to show error for bootloader. Had to remove crossfire reciver to flash firmware to the flight controller.
@kapnmorganfpv57842 жыл бұрын
Got a question about micro tx v2. What causes the blue light and no connection when you set output max power to 1 watt and dynamic power on? You can hold you hand on the antannae on the tx module and the light stays green and connects but move it and there goes your connection and you get the blue light
@willpowerfpv32462 жыл бұрын
My problem wasn't with Agent x, it was with Agent M. I tried to use M on Android to use the Telemetry feature on the latest update, and it bricked the Wi-Fi in my full-sized module... pretty annoying. Because I updated from 6.13, I had to pull everyone of my quads apart and manually hit the bind button. Since the beginning of the year, I've had to update all of the firmware on my 8 quads three times, and the flying season hasn't even started yet. I have new Nano rx's, old ones, and a TBS 69, and a couple of my quads are on 4.3.. I really hope they sort this out soon.
@spikester
2 жыл бұрын
OTA update from 6.13 to newer firmware appears broken once again, rollback to 6.13 if you can't be bothered to hit all the bind buttons again, worked for me.
@willpowerfpv3246
2 жыл бұрын
@@spikester thanks! yeah I found that out from Trappy a week or so ago... 6.13, and 6.14 had the broken binding button issue. I had to upgrade to 6.17 because I'm running betaflight 4.3 on a couple of my quads, and there was an issue with Baud rate negotiation, resulting in fail-safes at short distance. I had to take apart seven of my eight quads to get to the bind button. It sucked. It took me about six hours to update all of my Crossfire receivers. Trappy promised me that that would be the last time I would have to deal with this..😅🔫
@spikester
2 жыл бұрын
@@willpowerfpv3246 Indeed regarding BF 4.3, I believe I hit that CSRFv3 bug a few months ago and crashed once or twice, if thats the same bug that also lags the entire remote screen when it happens. I do have a 2nd Tango 2, so I will see if I can force the receivers into bind mode with my existing 6.13 flashed t2 and then try the OTA update with the 6.17 flashed t2.
@spikester
2 жыл бұрын
@@willpowerfpv3246 I can confirm it works was able to get one of my nano rx to 6.17 without taking it all apart. with 6.13 tx module already bond to nano rx, factory reset the nano rx, upon next power cycle it will then be in bind mode. enter bind mode on 6.17 tx module, it will then OTA update to 6.17, if it doesn't bind at this point try toggling off & on multibind if you use that, perhaps this is where the OTA updates are breaking those using multibind. You unfortunately need a 2nd crossfire tx module however.
@MrSabram07
2 жыл бұрын
I regret updating to BF 4.3. I don't understand why I did everything was running great on 4.2. I buy the hype I guess
@hitoma6896 Жыл бұрын
8:18 But how do I get into USB Agent if my TBS Mambo is bricked?
@quelafamiglia11 ай бұрын
You help a lot thank you ! I'm using a tbs mambo with an ears module and crossfire module. Both of the module don't power up when I plug them on the radio. Do you have any idea was happening ? I need to power up the module with an usb port at the same time the module is plug on the radio
@Bolot_Drake Жыл бұрын
Thank you very much! You have made my day happier.👍👍👍
@eugenioromerovera35542 жыл бұрын
hola amigo ....mi mambo no me enciende e echo todo lo que tu dices pero no me enciende que puedo hacer????
@user-vu4vu6gw1p6 ай бұрын
Hi in my tango 2 what let me search to even be able to bind just stays on the window n doesn’t show up with any crossfire option to bind
@rolliseventeen2 жыл бұрын
Error Code 9 means error in Layer 8 + Input error extension level 1 = 9.
@Aarons14bugs2 жыл бұрын
Well, I am definitely not happy right now. During fw update, after the main fw and then the restart is checked I get no lights on my micro tx v2. This is not a recognizable condition and i am forced to try replug but get no lights. Then only option is to press the button and am back at square 1, in bootloader mode. ☹
@tSobota2 жыл бұрын
Hi Joshua, I have a question. So there is a lot of things about controllers, protocols, video transmitters etc. Why is no one just using over internet transmission? Especially for long ranges that would make sense to just hook up your drone to some raspberry pi with a mobile internet connection, you could fly your drone in the USA from the basement in Europe. I know that latency would be a nightmare but I'm more focused on transmission speed and reliability. Or maybe there is something like that but I was looking around the internet poorly?
@JoshuaBardwell
2 жыл бұрын
Latency of internet connection is too high for proximity flying.
@tSobota
2 жыл бұрын
@@JoshuaBardwell How about iNav mission control?
@661FPV
2 жыл бұрын
Technically long range is illegal in every country. But yes there are systems that allow control link over the internet, and actually Rotor riot has done an episode doing exactly that. But like JB said the latency would be extremely high, and you would be limited to areas with cell coverage or internet connection. Modern control links are capable of going over 100KM and have near zero latency so why would you need anything else? And the reliability of an internet connection is near zero so it's very unsafe to use for control. Also Orqa has teased 5G video link systems for commercial use. It is not for hobby grade rc, racing, or freestyle at all.
@tSobota
2 жыл бұрын
@@661FPV Thanks for the reply. Got to see that RotorRiot video!
@tSobota
2 жыл бұрын
Found the video, you guys were right. For acro mode, it is not possible to fly. Here is the video: kzread.info/dash/bejne/a2ejlLeId9bTldo.html
@keoki859 ай бұрын
min 8:13, I was not able to get my screen to any menus. In fact it says I'm connected, got the green circle but still is giving me the "Link USB Device" pop up. After clicking I can link but firmware does not continue. This continues to happen and I'm not able to unbrick this TBS Mambo
@notkira_x2 жыл бұрын
Happened to me with 3 different receivers about half a year ago. They won't even do the emergency update receiver anymore, though the receiver itself looks fine. Switched to a different system because of it, very disappointed in TBS on this one.
@admranch8154 Жыл бұрын
having trouble with my tbs tango 2, the display keeps freezing when binding (like the small arrow that rotates on the display), tried many times but still no good result.
@sashageagea45914 ай бұрын
After holding F and plugging my rc, at the step link device, i try to do the same as you but end up with reconnecting my rc only to get an error message saying, should try again in booting mode… error code 15. I’ve been stuck at this point forever, please help🙏🏻
@afifathnin2 жыл бұрын
Hey Joshua, im having troubles with my bf4.3 and my tango2 pro(updated go latest versions) some how when im flying im kinda losing linkage. Its like when I do a flip , it will lagged or somekind of rclink not getting proper signal and my quad will tumble mid air and catch it back. Theres no prompting of tele loss or rx loss. This happened with bfrc3 and new tbs update. Was working perfectly fine with old bf4.2.11 and the old 2yrs back tango2 fw.
@antonrickert9427
2 жыл бұрын
This problem may not be a Crossfire problem, but rather motor desyncs. If this problem only happens after harsh movements (flips and rolls etc) it might be an indicator for motor desyncs.
@afifathnin
2 жыл бұрын
@@antonrickert9427 but once in awhile i my quad will just lost its telemetry and just land somewhere. Tbh i really have no idea what may have caused the problem. Yes desyncs maybe im experiencing those but sudden tele loss or rx loss like a few feet behind me is not normal though
@antonrickert9427
2 жыл бұрын
@@afifathnin yeah that sounds strange. Hopefully you will find a fix
@destinyhazee1192 жыл бұрын
I’m bricked up
@BRadFPV2 жыл бұрын
Please follow up with a video about latest 6.17 not working with Matek 722-HD. I hade to roll back to 4.08 to get UART comm working. Maybe connected?
@micsherwood49302 жыл бұрын
Could you do the Happymodel EP1 RX's now?
@rre95182 жыл бұрын
The only thing I could get was the Micro TX V1 , b/c V2 are sold out.. Using Agent M It loaded the 6.17 firmware in step 2, but in the next, 3rd step it said it could not find a compatible device. I see Micro TX (bootloader) but I'm stuck. It says it's paired, but now I see Error Code 5. SOS.
@rawpicsfpv35162 жыл бұрын
Had to send my Tango 2 in to get it recovered, i was not able to. It was soooo freaking frustrading
@jswiatekfpv Жыл бұрын
Hello!I have a problem with my tbs crossfire,it only works with external battery,what can i do?
@michaelcocroft97002 жыл бұрын
For the first time in years I’m considering moving off Crossfire because of the latest firmware issues. The Tango 2 is actually worse, I’ve had to move all receivers to the Module to resuscitate them then bind the again on the Tango. Super irritating.
@afifathnin
2 жыл бұрын
Yo you experienced some kind of rxloss/teleloss issue with the new fw update? Mine kinda losing reception and failsafed like a few feet behind me. Aint got issue with the older firmwares
@michaelcocroft9700
2 жыл бұрын
@@afifathnin There’s a Apex 4” stuck on my roof thanks to firmware. So I’m fairly unhappy. Luckily the next quad dropped in the grass. Lost the battery, but quad survived. So let’s just say I’m displeased.
@afifathnin
2 жыл бұрын
So i bet the new firmware caused your quad to lose its signal right? Mine doesnt even prompt any warnings and my quad just landed for no reason. All thanks to the new fw updates on rx and tx as well. Newer isnt any better. The firmware back 2years ago was the most stable one
@michaellopezgarcia4285 ай бұрын
Dost work for me
@danieleteodorosi89832 жыл бұрын
Does anyone know how's the durability of the dji goggles screws? I still have the stock antennas and find myself screwing/unskrewing them almost every day
@Flyby_Magee Жыл бұрын
I am installing my fifth one and every single one has had problems...
@SirFlukealot2 жыл бұрын
Would the process be the same for Sixty9 as well?
@SkyOrez2 жыл бұрын
Sadly a week to late, but still very helpful. :D
@gavysekhon5552 Жыл бұрын
stuck on 'link a device' as my tango 2 is not getting on, so cant select that usb agent, any solution to this ?, anyone ?
@farkoffcnt6 ай бұрын
what does error 11 mean?
@dronerant2 жыл бұрын
What about the wifi component. That’s not as simple right? What a mess..
@roadkill4twenty541 Жыл бұрын
This didn't fix the problem with my MicroTX V2. It only goes into bootloader mode, and will finish step 2 (Ma8n Firmware) of the update, but then gets stuck on the "Linking USB Device" screen to move on to step 3 (Subsystems) of the installation and won't go any further. If I push the button again it will flash light blue/teal volor really fast but won't reconnect the USB device. Is there a factory reset or something that I can try. I haven't found much helpful Information on this problem.
@alexvincent3500
Жыл бұрын
Have you found a solution to your problem? I faced exactly the same problem, I would be grateful if you write a solution to your problem
@FlyingMohsinRC Жыл бұрын
I am stuck at Update Receiver 0% in TX while updating tracer RX after doing an Emergency update
@JoshuaBardwell
Жыл бұрын
Generally if you just wait long enough it will start working. Otherwise power cycle and try again.
@FPVHans2 жыл бұрын
we want to update a mambo from tracer 5.15 to the latest firmware. after the update, both with agentx and m, the software says "successful" but the mambo remains on version 5.15. Is this a known problem or does anyone know a solution?
@JoshuaBardwell
2 жыл бұрын
Are you sure you are flashing the Tracer firmware and not the FreedomTX firmware.
@FPVHans
2 жыл бұрын
@@JoshuaBardwell yes. FreedomTX is Not a Problem to change the firmware. We up and downgraded it without any Problems. Only tracer is Stuck at 5.15.
@Naru072 жыл бұрын
My mambo is still bricked and this isnt working someone please help. I just got the radio and i bricked it
@JoshuaBardwell
2 жыл бұрын
If bootloader doesn't restore it, contact TBS support.
@mamoshimiloni9559 Жыл бұрын
I am SO so sorry that I bout this SH. I put lots of money into tbs and the time that I flew is minimal compare to what I use to buy and enjoy before!!!? I have burnned up several of their recievers!!? and I have been solderrin for over 20 years and I have all the equipment. it works fine until you connect to the internet or the tbs or what ever freakin thing. mY ADVICE. Once it works destroy the wifi on your dron so that no one wanted or unwanted can access it. SO YOU NEVER AGain have to PAY LOTS OF MENEY AND Get fked.....
@fobosfpv2 жыл бұрын
Joshua, unfortunately lately your channel has been receiving too many messages about new videos. They filled up the entire tape for me and now it is impossible to use it. This was not the case before. Forced to turn off all notifications from your channel. I hope in the future everything will be back as it was
@Fly_High_FPV2 жыл бұрын
Lol i warned you months ago
@salomaramona72862 жыл бұрын
I updated to 6.17 and have had no issues, should I still reflash 6.17 with agent m?
@JoshuaBardwell
2 жыл бұрын
If you have no issues, then I wouldn't mess with it.
@Waarjoo2 жыл бұрын
On my tango 2 tbs bootloader on agent m it says: firmware: v0.00 and under it says No settings. So what now?? there is no other options. There is not even option to update or downgrade firmware on agent m in normal mode.
@JoshuaBardwell
2 жыл бұрын
The answer is to re-flash it with the latest version available. If you're unable to do that, contact TBS support.
@Waarjoo
2 жыл бұрын
It had deleted tbs agent lite tools and when i put them back it says script syntax error attemp to call a table...
@Waarjoo
2 жыл бұрын
@@JoshuaBardwell Thank you for respond. Are they updating agent m or why i dont have anything to click here? It recognizes tbs bootloader but i has Only text "found no parameter"
@Waarjoo
2 жыл бұрын
Sorry my bad, there is. It was my tiny monitor and window over the border..
@Waarjoo
2 жыл бұрын
@@JoshuaBardwell Thank you! I finally got it work with your guide and patience. I actually got it first time to bind straight from the controller and somehow it solved all other problems with it.
@paulfpv2 жыл бұрын
I cannot fly since 16th of march for a bricked Micro TX. I already tried the bootloader mode flash with Agent M with no success (2 macs, 1 pc). TBS is giving extremely bad support for now. I'm thinking of releasing the email exchange with them, it's ridiculous. Maybe someone has this problem too: kzread.info/dash/bejne/oJqAq9xum9rblsY.html Probably a bad production batch (the soldering of the processor is a mess.. you can open your's and see if the production batch is the same: PCB V2 Batch 5)
@Aarons14bugs
2 жыл бұрын
Maybe you can locate this information on my circuit board?
@661FPV2 жыл бұрын
What is binding? (Laughs in ELRS)
@MrSabram07
2 жыл бұрын
That's something you do after trying to connect to my happy model ep2 for 5 hours because the Wi-Fi was not connecting to my computer
@661FPV
2 жыл бұрын
@@MrSabram07 5 hours? That's a bit too long lol. I have 7 HM Ep1 and Ep2 recivers flying fine and always flashed the first time. Only takes about 1 minute each. 30 seconds to connect 30 seconds to flash. Good luck!
@RLeeVisuals2 жыл бұрын
It’s a way to push tracer…….
@Belun-qj5iv2 жыл бұрын
i fucking love you
@vedasticks2 жыл бұрын
a good example on why the latest and greatest versons might not be the best. if it iant broke maybe dont fix it.
@MrSabram07
2 жыл бұрын
That statement has never been more true than with fpv drones
Пікірлер: 169
I love all the out takes. I just had to laugh because it reaffirms that even the pros have the same frustrations, have the same reactions, and utter the same expletives 😂🤣😂.
Had TBS done a better job of getting the word out about Agent X issues, this wouldn't be such a thing. It caught me too.
@MoppelMat
2 жыл бұрын
Their hp still promotes the agent x …. Dumb
@13FPV
2 жыл бұрын
Keep an eye on this channel, the man himself explains all known issues and the solutions here in detail. kzread.info
@MoppelMat
2 жыл бұрын
@@valentin.kompatscher they show „use agent m“ if you try to bind …
@jessiahd.6143
2 жыл бұрын
Their software Quality Assurance is non existent. Most companies will pull bugged software down from production. It shows that there's a big miss somewhere in their company.
@OCD_FPV
Жыл бұрын
@@MoppelMat i think his may be my problem.
I've been flying FPV for years now and sometimes it upsets me that things are more overly complicated today than they were a few years ago. All the bugs, incompatible parts, jenky firmware issues etc make it extra daunting for new pilots that actually want to build. something. That being said....there are MUCH better BNFs now so that's good. I've often said that FPV is full of companies that sell us products that are essentially in BETA and we're the testers.
@MrSabram07
2 жыл бұрын
Thank you
@ForwardBias
2 жыл бұрын
Hasn't Frsky been doing these incompatibilities on purpose for a few years now though? At least between receivers and transmitters?
@willsintheair
2 жыл бұрын
@@ForwardBias They're one of the worst ones. I've been on crossfire for years and my last FrSky TX (QX7S) needed to be opened up and have a extra chip added just to make crossfire work.
@emeraldcitycreative6892
2 жыл бұрын
Yes! TBS is supposedly the market leader in rx, but their products are so counter-intuitive, so operator- UNfriendly, it's ridiculous.. Seems like they're purposely making things more difficult for us mere mortals.
Just got a TBS Tango 2 last week, flashed it to the last firmware with Agent X directly. Couldn't bind. But the screen of the Tango 2 told me to use Agent M ! So I did, reflashed, and it worked and bind in the end.
0:09 THIS has been my entire crossfire experience from day 1! Nothing but frustration! But thank you for making this video JB!
@cynthiaanger1137
2 жыл бұрын
my whole fucking fpv experiance since day 1 in 2017
@MrSabram07
2 жыл бұрын
I think everybody interested in starting this hobby should watch this video and if they're not interested in dealing with stuff like this should turn and walk away
you are THE. BEST teacher. EVER. man, i HAD to donate you something
ELRS😃
@MCsCreations
2 жыл бұрын
Right?
@kingofjesters23
2 жыл бұрын
I use ELRS on my Mambo! Works great! I wonder what Trappy would say about this. lol
@willsintheair
2 жыл бұрын
I'm deeply invested into crossfire so I don't use ELRS but would 100% suggest it to any new pilots or anyone wanting to move up from 2.4. Such cool stuff going on in the ELRS world!
@MrSabram07
2 жыл бұрын
There's a lot of firmware updating and flashing with e l r s and it's real easy to make a mistake doing that. You're working with Bin files updating Lua scripts. Elrs can be no walk in the park either. Unless you're already great at flashing firmware
I have no idea what I'd do without your help jb you are a god send thankyou now and in advance for when I have to do this again tomorrow 🙏 ❤
Just another fine example of why I'm never disappointed with being a Patron! Thanks JB!
KZread needs to include a 👍👍 double thumbs up for these kind of content, thanks JB.
YOU ARE MY HERO! My Mambo did this just a few hours ago! Where did you go for information? TBS should be paying you for this video! I am so F'n pissed with the lack of their support. I tried to follow your SD card recovery but It didn't work for my Mambo, so now i have to spend the rest of today entering all my models back in. First, I have to figureout how to get it to calibrate correctly.
Used this video twice now.! Thanks you, One very happy Patreon member :)
Got me too. For about 2 days straight I regretted updating the firmware. I figured it out by reflashing old firmware and then moving back to the latest release.
I had done all these on ,,🙁my Tango 2 and tracer a month ago ... Never thought I would have these issues in TBS
Agent M on my Android Smartphone works All the time... At Second try 🤣 Thanks, i Hope this helps a Lot of ppl ... My Tipp, hard reset (Emergency Recovery) at least once Ur RX before try Binding and updating
Glad they didn't break the bootloader yet :P Tried to get a DOA CRSF rx to work (radio seems dead inside) and tried to get it to bind by cycling/downgrading firmwares of RX & TX. Ran through every single issue you showed here. "bricked" tx, not relinking after flash, having to flash twice, having to rebind everythnng, rx recovery & golden firmware, etc. Took me hours to realize that one RX might just be dead and get everything back to work after… and a ton of mental energy not to throw that shit into a wall. What happened to TBS being always rock solid… x.x
Thx for the info man. The hobby would be a nightmare without you and the others that help everyone else out. Good work man. Keep it going.
@MrSabram07
2 жыл бұрын
Absolutely I mean how would you know this if Josh didn't show this video
@emeraldcitycreative6892
2 жыл бұрын
Oh it's still a nightmare lol..
I had this issue like a week ago and went nuts!!!!! I’m so glad I got it working and this is what someone said on discord
Thank you! I was just about to order a new radio.. and NOT a TBS one, that's for sure
Awesome! Thanks a bunch, Joshua! 😊 Stay safe there with your family! 🖖😊
I’ve run into some confusion in the past, good information! I don’t know what we would do without you man! 🙏
Great video...finally graduating to a Tango 2...glad I saw this video my Tango is arriving today, as a matter of fact.
Lol. I just went through this tonight with a new rx and tango 2. Finally figured out out. Then I go on KZread and see this video. Would have saved a couple hours of frustration.
Lol there's always something with this hobby, always. I had an issue connecting to Wi-Fi on my new Express lrs. And I was just thinking to myself how much easier crossfire was and now there's this. Seems like we're beta testers
I realized its largely due to chip shortage, hopefully things can get all fixed soon, The old RXs' that require no update have started becoming so sought after, since people are worried about flashing and crashing.
Thanks! Was very frustrated when trying to bind two of my crossfire quads. The recommendation to use "Agent M" and to activate the "Golden Firmware" (with the comment that sometimes you might have to reboot or redo it) was the key to getting me in the air.
You are the man JB. Thought I bricked my Mambo, you saved me once again 😁✌️
learnt that smoke stopper trick from you a while ago, kudos for it, it's so useful :) especially with my toothpick motors where the screw holes become loose if i move the screws a lot
I experienced an interesting phenomenon in the last day, resulting in 2 issues, only one of which has been resolved, the other i'll attempt to address later this evening. 1. After a month of not flying anything I attempted to fly yesterday (8/31) with a Tracer equipped quad. I had used this quad before heading to EU for vacation, and expected no issues. Well, I tried to arm and realized nothing was happening. Upon further inspection, the rx had a solid red LED; following the bind procedures, none worked and i couldn't update. So, I updated my Tx tracer module and wasn't able to connect or bind still. For this, I'll need to use the emergency recovery process, but this issue led to #2. 2. I powered up my Mambo, and still, no dice. I couldnt bind to or update the Rx. I plugged in another Tracer quad, and it would connect to the Mambo, but not my Tx module. moving on, I decided to update the mambo; in the middle of the update, I received an error and it bricked the tx. I could not start the tx, the computer wouldnt recognize it, and if i plugged in, it only showed the charging battery sequence. I followed along with every video, advising to hold down the page button while plugging in to activate the bootloader mode. I did this, tried to update firmware, and every attempt failed when restarting as it required a linked device. After hours of trying, i gave up and decided to dig some more, ignoring every video out here. Then , i found it - hold down the MENU button to activate TRACER Bootloader mode - THIS allowed the Tracer firmware update and 'unbricked' the device. Upon completion the tx started up right away as per normal, and i was able to complete my updates. I think a blip in my home internet connectivity may have caused the initial failure. I still can't understand why the Rx's failed to connect prior to any update activity. Hope there's a nugget of help in here somewhere for someone else!
Had same Problem with the app. Web based agent worked for me. Had to Troubleshoot this on my Own. Also the radiomaster sorro has a bug with crossfire you cannot connect to rx menu to setup your channels. Sometimes it works sometimes the lua will not work. I connected the crossfire modul and the copter to the pc and set up all the different settings with my Computer. That worked for me
Thanks buddy!!!! Seriously appreciate your videos!!!!
Thank you, a great big thank you. I most definitely learned something.
Thank you Joshua!
Hahahahaha man the beginning of this video. Those outtakes are exactly my experience. Everyone always saying crossfire is super hyper easy. Nah man. I had so many issues that even Frsky:s stuff seemed easy and reliable.
Mr.Bardwell you saved me
Another great video! Great job.
Thanks you so much! You saved my day.
Thanks Joshua 👊🏻
Thanks I just flashed the new version to a receiver and module. I haven't had any problems though for now. Didn't know anything about this so it's great to know if it comes up.
THANK YOU
thanks
Saved my behind
safed my tango 2 pro today tx
this caught me also still cant figure out how to get everything back
From day #1 of owning the Tango 2, the crossfire ecosystem has never been trouble free for me. Tango was shipped with a software bug out of the box making it necessary to open and unplug the battery. I almost returned it right then, then a few days later the power bug was acknowledged and fixed. From that point, binding bugs bit me with every update. I suffered from the "half-bound" firmware bug that you called out on last year. It was never fun knowing that 50% of my xf receivers would fail to update OTA, and require a reset using emergency recovery to fix. Thanks for the video on this crossfire debacle... I've been seeing people complain about crossfire failsafes for a while with 4.3, failed flashes, etc, this sums it all up perfectly. I'm going to hold off updating for as long as possible.
Before the issues with agent X I was getting frustrated that I had to regularly (in order to keep upto date with the TBS updates) put my nano receivers into emergency mode to get them to work. Personally I've found Elrs to be much easier.
Nice video Joshua, however if you have a bricked radio like mine, and do the flashing, when the radio restarts, you can’t just turn it ton like you did in the video, because it’s bricked, so it does not flash
@JoshuaBardwell
2 жыл бұрын
After flashing in bootloader mode it shouldn't be bricked any more. Or am I misunderstanding....
@cacamacaaa
2 жыл бұрын
@@JoshuaBardwell well, that was not my case.. kzread.info/dash/bejne/qYijuaOIo7a7c5s.html jump directly to min 02:20. However TBS was kind enough to send a replacement
@paulfpv
2 жыл бұрын
@@JoshuaBardwell There are cases, like mine (and CTFpv.. and Aarons14bugs) where this doesn't work. This is what I sent to TBS: kzread.info/dash/bejne/oJqAq9xum9rblsY.html ...and TBS is avoiding to acknowledge the issue is happening to some customers... and it's days I'm waiting an answer to my last email. I'll love to send you the whole email exchange so you can understand better what is happening with TBS support. Are you interested? How can I send everything to you?
I recently went to update my tracer nano tx and agent m gave me all kinda of problems 🙃 after spending 3 hours working on something that should have taken 15 minutes, I've decided I'm gonna switch to ELRS
@MrSabram07
2 жыл бұрын
You can still have problems with ELRS. I recently spent two days trying to update and connect an ep+1 receiver. Turned out it was my PC, who knew? My PC worked with my TBS and Flsky receivers
@itshd7405
2 жыл бұрын
@@MrSabram07 yeah ,I understand that but the purpose of spending so much on something like tracer is to have a simple and seamless experience. If I have to sit for hours fiddling with something trying to get it to work, I'd rather be working with something new and subjectively better
@Bobikska1
2 жыл бұрын
TBS is crap if you want flash firmware i got Tango 2 and its imposible to flash it no mather what you do…. i spend like 4h and folow every steps gues what nothing. TBS radios are junk but TBS make great VTX no radios… Still use my Tango but looking to switch to ELRS
The chip shortage caused all new crossfire receivers to be shipped with new version 6.10, but my crossfire TX module won't bind with any receivers when updated to version 6.10. I'm still using version 3.27 and never encountered failures so I just choose not to update since firmware updates are a mess!!!
Hell you should have showed all these ppl the video I sent you on fb about what mine done, with the warning crap and if I flip a switch it goes away. Still haven't figured out why it does that
I liked in case I get bricked in the future, helps us both this way 😀
This is why I've learned, the hard way sometimes, that if everything works, do you REALLY need to ALWAYS update to the latest firmware ? Nah, bruh, I'm good.
@MrSabram07
2 жыл бұрын
Lol exactly
Everyday is a school day when watching bardwell
Wow! This video is long enough I'm glad I didn't brick my crossfire!
Croosfire reciver caused my computer to show error for bootloader. Had to remove crossfire reciver to flash firmware to the flight controller.
Got a question about micro tx v2. What causes the blue light and no connection when you set output max power to 1 watt and dynamic power on? You can hold you hand on the antannae on the tx module and the light stays green and connects but move it and there goes your connection and you get the blue light
My problem wasn't with Agent x, it was with Agent M. I tried to use M on Android to use the Telemetry feature on the latest update, and it bricked the Wi-Fi in my full-sized module... pretty annoying. Because I updated from 6.13, I had to pull everyone of my quads apart and manually hit the bind button. Since the beginning of the year, I've had to update all of the firmware on my 8 quads three times, and the flying season hasn't even started yet. I have new Nano rx's, old ones, and a TBS 69, and a couple of my quads are on 4.3.. I really hope they sort this out soon.
@spikester
2 жыл бұрын
OTA update from 6.13 to newer firmware appears broken once again, rollback to 6.13 if you can't be bothered to hit all the bind buttons again, worked for me.
@willpowerfpv3246
2 жыл бұрын
@@spikester thanks! yeah I found that out from Trappy a week or so ago... 6.13, and 6.14 had the broken binding button issue. I had to upgrade to 6.17 because I'm running betaflight 4.3 on a couple of my quads, and there was an issue with Baud rate negotiation, resulting in fail-safes at short distance. I had to take apart seven of my eight quads to get to the bind button. It sucked. It took me about six hours to update all of my Crossfire receivers. Trappy promised me that that would be the last time I would have to deal with this..😅🔫
@spikester
2 жыл бұрын
@@willpowerfpv3246 Indeed regarding BF 4.3, I believe I hit that CSRFv3 bug a few months ago and crashed once or twice, if thats the same bug that also lags the entire remote screen when it happens. I do have a 2nd Tango 2, so I will see if I can force the receivers into bind mode with my existing 6.13 flashed t2 and then try the OTA update with the 6.17 flashed t2.
@spikester
2 жыл бұрын
@@willpowerfpv3246 I can confirm it works was able to get one of my nano rx to 6.17 without taking it all apart. with 6.13 tx module already bond to nano rx, factory reset the nano rx, upon next power cycle it will then be in bind mode. enter bind mode on 6.17 tx module, it will then OTA update to 6.17, if it doesn't bind at this point try toggling off & on multibind if you use that, perhaps this is where the OTA updates are breaking those using multibind. You unfortunately need a 2nd crossfire tx module however.
@MrSabram07
2 жыл бұрын
I regret updating to BF 4.3. I don't understand why I did everything was running great on 4.2. I buy the hype I guess
8:18 But how do I get into USB Agent if my TBS Mambo is bricked?
You help a lot thank you ! I'm using a tbs mambo with an ears module and crossfire module. Both of the module don't power up when I plug them on the radio. Do you have any idea was happening ? I need to power up the module with an usb port at the same time the module is plug on the radio
Thank you very much! You have made my day happier.👍👍👍
hola amigo ....mi mambo no me enciende e echo todo lo que tu dices pero no me enciende que puedo hacer????
Hi in my tango 2 what let me search to even be able to bind just stays on the window n doesn’t show up with any crossfire option to bind
Error Code 9 means error in Layer 8 + Input error extension level 1 = 9.
Well, I am definitely not happy right now. During fw update, after the main fw and then the restart is checked I get no lights on my micro tx v2. This is not a recognizable condition and i am forced to try replug but get no lights. Then only option is to press the button and am back at square 1, in bootloader mode. ☹
Hi Joshua, I have a question. So there is a lot of things about controllers, protocols, video transmitters etc. Why is no one just using over internet transmission? Especially for long ranges that would make sense to just hook up your drone to some raspberry pi with a mobile internet connection, you could fly your drone in the USA from the basement in Europe. I know that latency would be a nightmare but I'm more focused on transmission speed and reliability. Or maybe there is something like that but I was looking around the internet poorly?
@JoshuaBardwell
2 жыл бұрын
Latency of internet connection is too high for proximity flying.
@tSobota
2 жыл бұрын
@@JoshuaBardwell How about iNav mission control?
@661FPV
2 жыл бұрын
Technically long range is illegal in every country. But yes there are systems that allow control link over the internet, and actually Rotor riot has done an episode doing exactly that. But like JB said the latency would be extremely high, and you would be limited to areas with cell coverage or internet connection. Modern control links are capable of going over 100KM and have near zero latency so why would you need anything else? And the reliability of an internet connection is near zero so it's very unsafe to use for control. Also Orqa has teased 5G video link systems for commercial use. It is not for hobby grade rc, racing, or freestyle at all.
@tSobota
2 жыл бұрын
@@661FPV Thanks for the reply. Got to see that RotorRiot video!
@tSobota
2 жыл бұрын
Found the video, you guys were right. For acro mode, it is not possible to fly. Here is the video: kzread.info/dash/bejne/a2ejlLeId9bTldo.html
min 8:13, I was not able to get my screen to any menus. In fact it says I'm connected, got the green circle but still is giving me the "Link USB Device" pop up. After clicking I can link but firmware does not continue. This continues to happen and I'm not able to unbrick this TBS Mambo
Happened to me with 3 different receivers about half a year ago. They won't even do the emergency update receiver anymore, though the receiver itself looks fine. Switched to a different system because of it, very disappointed in TBS on this one.
having trouble with my tbs tango 2, the display keeps freezing when binding (like the small arrow that rotates on the display), tried many times but still no good result.
After holding F and plugging my rc, at the step link device, i try to do the same as you but end up with reconnecting my rc only to get an error message saying, should try again in booting mode… error code 15. I’ve been stuck at this point forever, please help🙏🏻
Hey Joshua, im having troubles with my bf4.3 and my tango2 pro(updated go latest versions) some how when im flying im kinda losing linkage. Its like when I do a flip , it will lagged or somekind of rclink not getting proper signal and my quad will tumble mid air and catch it back. Theres no prompting of tele loss or rx loss. This happened with bfrc3 and new tbs update. Was working perfectly fine with old bf4.2.11 and the old 2yrs back tango2 fw.
@antonrickert9427
2 жыл бұрын
This problem may not be a Crossfire problem, but rather motor desyncs. If this problem only happens after harsh movements (flips and rolls etc) it might be an indicator for motor desyncs.
@afifathnin
2 жыл бұрын
@@antonrickert9427 but once in awhile i my quad will just lost its telemetry and just land somewhere. Tbh i really have no idea what may have caused the problem. Yes desyncs maybe im experiencing those but sudden tele loss or rx loss like a few feet behind me is not normal though
@antonrickert9427
2 жыл бұрын
@@afifathnin yeah that sounds strange. Hopefully you will find a fix
I’m bricked up
Please follow up with a video about latest 6.17 not working with Matek 722-HD. I hade to roll back to 4.08 to get UART comm working. Maybe connected?
Could you do the Happymodel EP1 RX's now?
The only thing I could get was the Micro TX V1 , b/c V2 are sold out.. Using Agent M It loaded the 6.17 firmware in step 2, but in the next, 3rd step it said it could not find a compatible device. I see Micro TX (bootloader) but I'm stuck. It says it's paired, but now I see Error Code 5. SOS.
Had to send my Tango 2 in to get it recovered, i was not able to. It was soooo freaking frustrading
Hello!I have a problem with my tbs crossfire,it only works with external battery,what can i do?
For the first time in years I’m considering moving off Crossfire because of the latest firmware issues. The Tango 2 is actually worse, I’ve had to move all receivers to the Module to resuscitate them then bind the again on the Tango. Super irritating.
@afifathnin
2 жыл бұрын
Yo you experienced some kind of rxloss/teleloss issue with the new fw update? Mine kinda losing reception and failsafed like a few feet behind me. Aint got issue with the older firmwares
@michaelcocroft9700
2 жыл бұрын
@@afifathnin There’s a Apex 4” stuck on my roof thanks to firmware. So I’m fairly unhappy. Luckily the next quad dropped in the grass. Lost the battery, but quad survived. So let’s just say I’m displeased.
@afifathnin
2 жыл бұрын
So i bet the new firmware caused your quad to lose its signal right? Mine doesnt even prompt any warnings and my quad just landed for no reason. All thanks to the new fw updates on rx and tx as well. Newer isnt any better. The firmware back 2years ago was the most stable one
Dost work for me
Does anyone know how's the durability of the dji goggles screws? I still have the stock antennas and find myself screwing/unskrewing them almost every day
I am installing my fifth one and every single one has had problems...
Would the process be the same for Sixty9 as well?
Sadly a week to late, but still very helpful. :D
stuck on 'link a device' as my tango 2 is not getting on, so cant select that usb agent, any solution to this ?, anyone ?
what does error 11 mean?
What about the wifi component. That’s not as simple right? What a mess..
This didn't fix the problem with my MicroTX V2. It only goes into bootloader mode, and will finish step 2 (Ma8n Firmware) of the update, but then gets stuck on the "Linking USB Device" screen to move on to step 3 (Subsystems) of the installation and won't go any further. If I push the button again it will flash light blue/teal volor really fast but won't reconnect the USB device. Is there a factory reset or something that I can try. I haven't found much helpful Information on this problem.
@alexvincent3500
Жыл бұрын
Have you found a solution to your problem? I faced exactly the same problem, I would be grateful if you write a solution to your problem
I am stuck at Update Receiver 0% in TX while updating tracer RX after doing an Emergency update
@JoshuaBardwell
Жыл бұрын
Generally if you just wait long enough it will start working. Otherwise power cycle and try again.
we want to update a mambo from tracer 5.15 to the latest firmware. after the update, both with agentx and m, the software says "successful" but the mambo remains on version 5.15. Is this a known problem or does anyone know a solution?
@JoshuaBardwell
2 жыл бұрын
Are you sure you are flashing the Tracer firmware and not the FreedomTX firmware.
@FPVHans
2 жыл бұрын
@@JoshuaBardwell yes. FreedomTX is Not a Problem to change the firmware. We up and downgraded it without any Problems. Only tracer is Stuck at 5.15.
My mambo is still bricked and this isnt working someone please help. I just got the radio and i bricked it
@JoshuaBardwell
2 жыл бұрын
If bootloader doesn't restore it, contact TBS support.
I am SO so sorry that I bout this SH. I put lots of money into tbs and the time that I flew is minimal compare to what I use to buy and enjoy before!!!? I have burnned up several of their recievers!!? and I have been solderrin for over 20 years and I have all the equipment. it works fine until you connect to the internet or the tbs or what ever freakin thing. mY ADVICE. Once it works destroy the wifi on your dron so that no one wanted or unwanted can access it. SO YOU NEVER AGain have to PAY LOTS OF MENEY AND Get fked.....
Joshua, unfortunately lately your channel has been receiving too many messages about new videos. They filled up the entire tape for me and now it is impossible to use it. This was not the case before. Forced to turn off all notifications from your channel. I hope in the future everything will be back as it was
Lol i warned you months ago
I updated to 6.17 and have had no issues, should I still reflash 6.17 with agent m?
@JoshuaBardwell
2 жыл бұрын
If you have no issues, then I wouldn't mess with it.
On my tango 2 tbs bootloader on agent m it says: firmware: v0.00 and under it says No settings. So what now?? there is no other options. There is not even option to update or downgrade firmware on agent m in normal mode.
@JoshuaBardwell
2 жыл бұрын
The answer is to re-flash it with the latest version available. If you're unable to do that, contact TBS support.
@Waarjoo
2 жыл бұрын
It had deleted tbs agent lite tools and when i put them back it says script syntax error attemp to call a table...
@Waarjoo
2 жыл бұрын
@@JoshuaBardwell Thank you for respond. Are they updating agent m or why i dont have anything to click here? It recognizes tbs bootloader but i has Only text "found no parameter"
@Waarjoo
2 жыл бұрын
Sorry my bad, there is. It was my tiny monitor and window over the border..
@Waarjoo
2 жыл бұрын
@@JoshuaBardwell Thank you! I finally got it work with your guide and patience. I actually got it first time to bind straight from the controller and somehow it solved all other problems with it.
I cannot fly since 16th of march for a bricked Micro TX. I already tried the bootloader mode flash with Agent M with no success (2 macs, 1 pc). TBS is giving extremely bad support for now. I'm thinking of releasing the email exchange with them, it's ridiculous. Maybe someone has this problem too: kzread.info/dash/bejne/oJqAq9xum9rblsY.html Probably a bad production batch (the soldering of the processor is a mess.. you can open your's and see if the production batch is the same: PCB V2 Batch 5)
@Aarons14bugs
2 жыл бұрын
Maybe you can locate this information on my circuit board?
What is binding? (Laughs in ELRS)
@MrSabram07
2 жыл бұрын
That's something you do after trying to connect to my happy model ep2 for 5 hours because the Wi-Fi was not connecting to my computer
@661FPV
2 жыл бұрын
@@MrSabram07 5 hours? That's a bit too long lol. I have 7 HM Ep1 and Ep2 recivers flying fine and always flashed the first time. Only takes about 1 minute each. 30 seconds to connect 30 seconds to flash. Good luck!
It’s a way to push tracer…….
i fucking love you
a good example on why the latest and greatest versons might not be the best. if it iant broke maybe dont fix it.
@MrSabram07
2 жыл бұрын
That statement has never been more true than with fpv drones
Do you unbrick Xbox? Lolz