Up at 3 am watching mike finally admit what none of us really want to " I'm getting old " . Like you I buy what ever it takes to make my work day easier at this point in my life .

@Ram2253spd

5 жыл бұрын

Gary Harms I’m 38 and I’m buying everything to make it easier including thick foam mat for kneeling to set up lift etc

@michaelstjohn6086

5 жыл бұрын

@@Ram2253spd I'm eyeballing the Top side creeper myself!

@shaneribucan3362

4 жыл бұрын

Gary Harms ur gay

It does have a bright display and I always thought the same that when you buy a decent meter silicone test leads should always be included. Thanks for the review!

FINALLY!!! Normalized audio. Please continue to include the outtakes, those were great.

Great review man. I've got the backlit screen in their eedm525cf. I love it. It's slightly smaller than this one. But you are absolutely right about being easier to see. I do a fair amount of work after the sun goes down. And it's nice to not have to keep pressing the light button on a fluke meter.

I know this video is now 3 years old but I recently purchased one and I have to say it’s an awesome DMM. I too am a avid scope user but I believe that the DMM/DVOM are still great tools for working on “chassis” electrical . The leads could be better but they’re not the worse I’ve seen lol . Great video

I couldn’t resist...I picked one up on Friday. Such a nice tool.

@flatratemaster

5 жыл бұрын

The screen was the selling point for me

Instead of the thermo couplers and RPM sensor, a current clamp would be nice.

@daveh9907

4 жыл бұрын

Another review by," Rustbelt Mechanic" shows even plugging a Snap-on Current clamp into this unit was a waste of time. Better try before buying.

@JD730

4 жыл бұрын

@@daveh9907 Always heard that current clamps are useless with DMM and really only good on a scope because a meter is too slow to really utilize a current clamp.

@titotitodiablo6697

3 жыл бұрын

Clamp meter should be perfect for me I’m industrial mechanic, I like this meter but I really love if I can connect the clamp to this

@scientist100

2 жыл бұрын

Do you know what kind of thermo couplers work with this meter? I tried a k type that is used by my other and it kept saying "open". Thanks!

Thanks for sharing your experience with this dvom

You should totally do more bloopers, I watched that blooper multiple times it was super funny

@flatratemaster

5 жыл бұрын

I will as long as they are funny and PG

Thanks for the review! Even my snap on dealer said the same thing about those cheap leads lol

Great video thanks brother. Great review of the dvom. I think at this point in my life I will stay with my Fluke. I think for everyone in the trade probably would be nice to have. Keep up the great work see you in the next video thanks again brother

Thanks great video and like the bigger display

I also have this meter. So far I love it. I have no issues with the app on my phone or my iPad. I love the built in thermometer I use that a bunch. Expect check your adaptor that plugs into your meter. I'll put money on it that it is loose in the banana Jack's. Also the distant on the Bluetooth is amazing. It's great for working on rvs. One. Thing I don't like is there meter shuts off after a few minutes. I need it to stay on longer

@jcran42

4 жыл бұрын

Greg Dixon don’t know if you have learned this yet being that your comment is 8 months old, but you can disable the auto off on this meter. Hold the Function button down while turning it on until the little power icon goes off.

Good review Mike. After seeing that display and review it looks like I’ll be dropping some cash on a new meter 😂

@flatratemaster

5 жыл бұрын

😉😈😈😈

Looks a nice bit of kit... Dont know if it justifys the price though. Ive got the fluke 233 and it does have a back light. With nice silicon leads....think ill stick with that for a while

Congrats on 20k

@flatratemaster

5 жыл бұрын

Thank you!

Love the scanner, can't find much information on how the spark plug clamp work. Do they work for coil on plug application or only on traditional plug wires?

The app is slot better than what it was when the meter first came out. Haven’t had any app issues on my IPhone. Only thing I’d have liked to seen put into the meter is Isolation testing for hybrids....and like you said, better leads. Great video man.

@flatratemaster

5 жыл бұрын

Thanks!

@crazyelmokong

10 ай бұрын

That’s the same thing I thought if they would’ve put for isolation testing it would definitely feel a little more worth the price but I still can’t stop smiling when I take it out lol

Ive seen those meters, but haven't had a chance to use one myself. That screen does look good in the picture from under the dash.

@flatratemaster

5 жыл бұрын

The screen is the best feature of the meter PJ

Great ! I’ve been waiting on this one ! Thanks for the info . I probably won’t buy one anyway

It even measures dwell time if you work on an old car that has points

Ha ha liked the blooper🤣🤣 Snap on Master!

@flatratemaster

5 жыл бұрын

😉🤣🤣🤣🤣

@ghostofthedeep

5 жыл бұрын

I was just about to comment this it made me spit I was laughing so hard

Thanks for sharing info Swr

Great review with your matco hat and jacket 😁😂😂

I'm just starting to get into electric work and am a student still. I have all my basic tools and a lot of specialty tools before anyone thinks I'm jumping the gun. I've been a mechanic for about 5 years and am just now working my way into electric work. I'm wondering if I should take advantage of the student discount for this meter now while I still can even though I'm not quite at the point where this hood of a meter is necessary.

Traded my 504D meter for it, I love it except for its power consumption. It EATS 9v batteries. I have learned to keep a couple of Energizer Lithium 9v batteries in the carry bag.

Would you say it’s just as good as the fluke 88. Thinking about getting a new meter. Either the fluke 88 or the snap in advance

what kind of warranty do they come with? just curious

I Like it. But my Fluke works fine

Can you get wireless probes for that DVOM?

And for some reason the automatic closed captioning thought you said "I am the flower master" 7:11 Lol.

great video FM snap on marketing geniuses

Nice meter and great video

I prefer the flute 223 with a removable display It doesn't measure pulse width or duty cycle but that's better done with A-scope

I just got my but the screen bright is to dark I don't know how to make it more brightness

Flat rate, does the texture on the meter screen interfere with the way the numbers look?

I brought the metre you used to use on your recommendation and I agree that it can be hard to see under a dash but as a young technician I can’t justify spending £500+ on a metre until I find that the one I’m using isn’t working for my needs I’d rather spend £500 on a Milwaukee impact gun that will increase my productivity or a specialist tool for a job I do regularly but it does look like a neat bit of kit

@flatratemaster

5 жыл бұрын

Don't blame you on that, my old meter worked well, not much difference other than the display and the app

@jamiefenner123

5 жыл бұрын

Flat Rate Master maybe one day mate

what is wrong with the vantage

I’ve not had any issues on my iPhone

I had that same hat 12 years ago.

How do you change the battery on the eedm596

hey car dad, what fluke leads are those?

Is it auto ranging or manual

I still have the same snapon one as your old one.

@gregoryfairchild2460

5 жыл бұрын

Mine was $349...btw

Hey FRM, I'm buying a scan tool which one would you recommend for an independent tech? Give me two options please one for best quality in your opinion and other best value but still good scanner thx sir

WTF Mr flat rate master it’s been 2days without a new video

Maybe a 10 dollar cheapo case for a 700 dollar dvom. Kinda like the 2 dollar case I got with snap on thermal imager...lol

Get the Fluke 289 with the ir3000 wireless connector. It puts the Snappy to shame for the same price.

I got one see if worth it😉

Great Video

I did upgrade the leads to fluke when I got the snap on manual dvom you recommended me. I love its simplicity if I get another meter i getting a fluke though. You thoughts on the snap vantage pro. Ived used it off and on but never liked the price

@flatratemaster

5 жыл бұрын

I like the Vantage Pro as a starter scope, it has limitations but good tool. The price tag on the current production Vantage Ultra is too high and they removed the internal amp setting, so you can't use it if draw issues putting it inline like the pro

@anthonygm85

5 жыл бұрын

I'll try looking for an older vantage like I used in school years ago. I was never to good with a scope

Hey had a question in regards to doing drain testing.. does this thing go to sleep and no longer allow use of the remote viewing.. would be great to hook it up and leave your remote device on your box and monitor throughout the day

@flatratemaster

4 жыл бұрын

There is an option on the tool so it stays on, until the battery dies or you shut it off

Milwaukee has an amazing multimeter

I think Snap On would have an opinion on you being the Snap On Master. XD

I'm thinking of buying one of these but could you tell me do you get a plausible ghost voltage with the leads open, my current colour DVOM sits at 300mV, not ideal for seeing if I have a open circuit on a wire. Cheers

@flatratemaster

5 жыл бұрын

I will check monday at the shop

@flatratemaster

5 жыл бұрын

very low ghost voltage

@antthecat147

5 жыл бұрын

Brilliant, thanks for answering. Might be time to upgrade. Many thanks.

U probably wont see this being a 3 yo video but I'd love to know how you feel about in 3 almost 4? Years later??

Hey FRM does this tool have a graphing function,luv the vids thx

@69greger

5 жыл бұрын

Threw the app it does

@georgebonney90

5 жыл бұрын

That's really cool 😎 I guess I expected that from snap on

what are good test leads to put on a multi meter w the crappy factory leads

@flatratemaster

5 жыл бұрын

Fluke

@ronvonbargen8411

4 жыл бұрын

Probe master test leads are the best

Good video

I have the enhanced version and it shuts off at the worst possible moment when I really need it ...... That's my pet peeve

@flatratemaster

4 жыл бұрын

before you turn it on, hold the function button, that will kill the auto turn off function and it will stay on until the battery goes dead

@chrislore2681

4 жыл бұрын

@@flatratemaster ......... Thank you for the tip............I'm chasing a voltage drop on a 70 hemi cuda with a charging problem...........lol..... When it kept shutting off I got mad and got my father's 20 year old blue point....... Yeah I mainly bought the snap-on because you could see it easier and it's got a bigger screen........

You can admit it, same reason I bought it, its snapon, and it is a sexy meter, I absolutely love it, I didn't need it, the same with the snap on probe, it's a sexy tool, and works really well I was impressed with both and bought them together, but ultimately it is a nice looking unit, I dont ha e a problem with the app, it might b your wifi, the only thing I don't like about the app is the graph, it only records up to 1 sec real time, I think they should have thought that threw a little better, but an awesome unit, love the videos frm, keep doing good work buddy,

Do you have your own projects/toys at home ?

@flatratemaster

5 жыл бұрын

Don't have time or parking for a project

@mikeaze423

5 жыл бұрын

Your a beast and a money maker in the shop

You can get cheaper fluke meters that have backlit screens

Maybe I’m old but I still think one of the first tools a young buck needs to master is a basic DVOM. Years ago you had two choices. 1. An expensive Fluke or 2. A cheap piece of Chinese junk. Not so anymore. There are decent and reliable meters for less than $200 today. I’ll always have a decent DVOM.

Thats alot of 💰

I hope it lasts for you. The price of this Snap-On DVOM is actually not that bad (weird, ain't it). The price I paid the MAC guy for my Fluke 88 was about the same ($700). It came complete with the current clamp, case and some really good leads. The Fluke has been absolutely bullet proof for the two years I've owned it, which is what I expect from a Fluke, but it doesn't have the nice display and Blu-tooth stuff that the Snap-On has. I'm not sure what I would buy today. The Bosch FSA 50 has a big screen, it does wireless, and it can do the higher voltages and current draws you will need if you work on highbred cars. I suppose it all comes down to what works and what will last, which is why I count on reviews like these. My track record with the durability of Snap-On electronics goes from really good to absolutely terrible. Scanners like my Solus, Modis, and "Brick" (MT2500) never gave me any trouble and served me well until I traded them in. But, I got HOSED on my MT3000A lab scope (w/4-gas), MT3750 battery tester, and my "Computerized" wheel balancer (I don't remember the model number because it didn't last very long). Those three EXPENSIVE pieces of equipment didn't last long enough to cover the payment period... they were JUNK, plain and simple. I suppose that is why I'm more inclined to buy from the specialist companies today... like Fluke for volt meters. I like Hunter and Ranger for anything tires, for battery and charging system testing I've gone to Bosch (BAT151), and I've got a Pico scope (like everyone else seems to have). I also think that with the new Bosch and Autel scan tools showing better performance, people will be less likely to look at Snap On for scan tools in the future.

@jedidiah4004

5 жыл бұрын

What was the failure mode on your battery tester? Myself and another guy have the EECS150 and they have been bullet proof

@leoashrae4199

5 жыл бұрын

@@jedidiah4004 I don't know anything about your EECS150. I never owned one and, judging by the catalog description, it isn't remotely anything like my MT3750 that gave me so much trouble. The problems I had with the MT3750 started the first year I owned it...the AMP display started showing only the last digit. The Snap On "equipment guy" (who was a real flaming Axx Hxxx) took it to the "depot" in Harrisburg for repair. I didn't get it back for TWO MONTHS! Then, when I did get it back, I couldn't "zero" it. Bottom line: It was one problem after another for almost three years until finally all the annunciator lights came on at once and the "volts" display would go to (and stay at) 8888 as soon as you turned it on. That was when the "depot" told me that it needed a new "board", but replacement boards where no longer available. I was ripped-off, plane and simple. Snap On doesn't carry parts for any of their proprietary electronic and air tools for very long. And, it seems that parts for the tools that had serious quality/design issues from the get-go always run out the day after Snap On discontinues it. Just remember: If you buy one of Snappy's proprietary tools, they are the only game in town when you need parts or service, and their equipment warranties are NOTHING like the lifetime, no questions asked, warranty on their hand tools. Usually it's only one year. Be careful...

Maybe Mike should be called flat matco/snap on tool master lol. ;) Just saying!

RPM??!!... Real Pretty Measurements

You know I'm 35 years old and the only reason why I bought the snap-on was cuz it was big and I could see it and read it lol............

Just about every decent dvom has a backlight. My Fluke 88 does.

@flatratemaster

5 жыл бұрын

still a crappy LCD screen that is hard to see though

That's like a Corvette on 15k mile Chinese tires No good

@flatratemaster

5 жыл бұрын

My Snap on dealer thinks it stupid too

The fix for that is a new phone did I mention snap on phone😂2000

Lil too much money for a DVOM

@prevost8686

4 жыл бұрын

What did you expect from Scrap-Iron? Overpriced and outrageous compound interest are their calling cards.

Nice multimeter for rich mechanics, but no thanks i love my $130 multimeter lol

I have one of these meters and cannot find anyone to buy it off me. The screen looks cool but washes out in any light. The auto shut off is annoying Eats 9v batteries alive and changing them is a bitch. I go through one battery about every to cars. The Bluetooth feature is a joke and has no support! $100 Autel 539b kicks this things ass everyday

Where is it made ? Cheap leads. Force you to buy better leads. Scammers.

its made by fluke

@flatratemaster

4 жыл бұрын

With a bosch sensor🤣🤣🤣

Your the what? Lol

Why wouldn't you just buy a fluke for that money? Snapon aren't experts, but fluke are. And that's not an item you're gonna need to replace on the tool truck you know. They have an android app too Sockets, ratchets, spanners, extensions, stuff you're gonna break and wear out. I get, but buying a multimeter from snapon makes no sense.

@flatratemaster

5 жыл бұрын

Because it made a good youtube video😉

@TheMegaross91

5 жыл бұрын

Fair one, made me watch it ha ha

@mharradine57

5 жыл бұрын

Because new tools are cool.

is it still worth it