this took me down a deep rabbit hole of researching the mechanical properties of PETG - just so i can design some snap fit joint for a simple box i made. that brochure is amazing.
@yoremkastor4 жыл бұрын
Just to note: These are mostly applicable to plastic injection you need to consider a lot more cases when building for 3D prints because of layer building hierarchy.
@yoremkastor
3 жыл бұрын
@@dr.n3246 Search for plastic injection and compare with 3d print. You will notice plastic injection is more sturdy.
@lo2740
19 күн бұрын
additive 3D printing is only good for hobby, it is unsuitable for production. So yeah, industrial design is all about injection, what would be the point of "building for 3D print (whatever it means)" when you work on actual consumer / industrial products? In these cases production efficiency, quality of the part, precision and surface finish are the actual concerns, nothing additive 3D printing can achieve.
@ROBJECTS2 жыл бұрын
Back to work! 😜 Thank you for sharing!😁
@KurauPlastics2 жыл бұрын
Explaining how snap fit joints work with animation might be clearer.
@enyoc3d4 жыл бұрын
do you have a link to the pdf? thanks for sharing this video
@ImKittyCow
2 жыл бұрын
if you look up "plastic snap fit design fasteners.pdf" the first result is an MIT page that has the pdf!
@@ImKittyCow Much obliged, exactly what I was scrolling for!
@ThePhilbox3 жыл бұрын
Thank you!
@veganjackson7 ай бұрын
How is you looking at a document a KZread video?
@SoulOne7133 жыл бұрын
What they made off ?
@Wushu17 Жыл бұрын
Hello. I have an electric charcoal lighter from the 1980s that I'm trying to take apart. I was able to remove the 2 metal screws with no issues. However, the plastic cover won't come off. I was able to slip through the seam with a flat screwdriver, but gently prying it won't pop the lid open. And I don't want to damage it with excessive force. I'm thinking that theres some snap fit joints involved, but I'm not 100% sure. Is there a tool you could recommend for releasing the snap joints regardless if they're permanent or not? Without damaging or breaking anything of course. Thanks
@fakesupremebag
Жыл бұрын
In the same spot as you my friend let me know if you figured it out
@Wushu17
Жыл бұрын
@@fakesupremebag Hey there. After numerous attempts at gently prying and lifting, the lid just wouldn't come off. So I figured out there was an area inside the handle where there were some stubborn snaps. Luckily I I could slip a flathead screwdriver through the narrow opening where the power cord is attached. Since the snaps were located in an obscure area, i decided to apply force in that area with the screwdriver to break the snaps. Once i did that, it popped right open. I just wish I figured it out sooner and not caused hairline cracks on the lid due to fiddling around that whole time.
@gamingmix72372 жыл бұрын
can you help me sending a pdf about " snap joint connections of frp structures" ?
@alonsiu3 жыл бұрын
Hola, como se llama el libro? de donde lo puedo bajar o comprar..? gracias
@benjaminfacouchere2395
3 жыл бұрын
Entrar "snap-fit joints design guide bayer" en google da por ejemplo lo siguiente enlace: studylib.net/doc/18095695/snap-fit-joints-for-plastics---a-design-guide-by-bayer
Пікірлер: 29
this took me down a deep rabbit hole of researching the mechanical properties of PETG - just so i can design some snap fit joint for a simple box i made. that brochure is amazing.
Just to note: These are mostly applicable to plastic injection you need to consider a lot more cases when building for 3D prints because of layer building hierarchy.
@yoremkastor
3 жыл бұрын
@@dr.n3246 Search for plastic injection and compare with 3d print. You will notice plastic injection is more sturdy.
@lo2740
19 күн бұрын
additive 3D printing is only good for hobby, it is unsuitable for production. So yeah, industrial design is all about injection, what would be the point of "building for 3D print (whatever it means)" when you work on actual consumer / industrial products? In these cases production efficiency, quality of the part, precision and surface finish are the actual concerns, nothing additive 3D printing can achieve.
Back to work! 😜 Thank you for sharing!😁
Explaining how snap fit joints work with animation might be clearer.
do you have a link to the pdf? thanks for sharing this video
@ImKittyCow
2 жыл бұрын
if you look up "plastic snap fit design fasteners.pdf" the first result is an MIT page that has the pdf!
@ArnaudMEURET
Жыл бұрын
fab.cba.mit.edu/classes/S62.12/people/vernelle.noel/Plastic_Snap_fit_design.pdf
@heresoneavailable
Ай бұрын
@@ImKittyCow Much obliged, exactly what I was scrolling for!
Thank you!
How is you looking at a document a KZread video?
What they made off ?
Hello. I have an electric charcoal lighter from the 1980s that I'm trying to take apart. I was able to remove the 2 metal screws with no issues. However, the plastic cover won't come off. I was able to slip through the seam with a flat screwdriver, but gently prying it won't pop the lid open. And I don't want to damage it with excessive force. I'm thinking that theres some snap fit joints involved, but I'm not 100% sure. Is there a tool you could recommend for releasing the snap joints regardless if they're permanent or not? Without damaging or breaking anything of course. Thanks
@fakesupremebag
Жыл бұрын
In the same spot as you my friend let me know if you figured it out
@Wushu17
Жыл бұрын
@@fakesupremebag Hey there. After numerous attempts at gently prying and lifting, the lid just wouldn't come off. So I figured out there was an area inside the handle where there were some stubborn snaps. Luckily I I could slip a flathead screwdriver through the narrow opening where the power cord is attached. Since the snaps were located in an obscure area, i decided to apply force in that area with the screwdriver to break the snaps. Once i did that, it popped right open. I just wish I figured it out sooner and not caused hairline cracks on the lid due to fiddling around that whole time.
can you help me sending a pdf about " snap joint connections of frp structures" ?
Hola, como se llama el libro? de donde lo puedo bajar o comprar..? gracias
@benjaminfacouchere2395
3 жыл бұрын
Entrar "snap-fit joints design guide bayer" en google da por ejemplo lo siguiente enlace: studylib.net/doc/18095695/snap-fit-joints-for-plastics---a-design-guide-by-bayer
@alonsiu
3 жыл бұрын
@@benjaminfacouchere2395 gracias
👍
can I get this PPT notes please
@sam90o48
2 жыл бұрын
i found it tyvm
@atharvaattarde2402
Жыл бұрын
@@sam90o48 hey where did you find it?
@jaduyare
8 ай бұрын
fab.cba.mit.edu/classes/S62.12/people/vernelle.noel/Plastic_Snap_fit_design.pdf
This would have benefited from some enthusiasm.