Can we use adjust fan with this same volt and sensor

Hi bro,please make a video on how to connect it with exaust fan in the kitchen to start automatically detecting by smoke ..my mother suffering a lot because smoke..

Can you add motor also for this project if yes please reply how to add motor

Sir MQ135 gas sensor ki power Light hi nahi jal rahi hai kiya problem hi.. Mai connection proper kar raha hu phir bhee.

Amazing all other videos were shwoing with useof the arduino board helped alot for my school project

@TechTrendsShameer

2 жыл бұрын

Thanks a lot. Keep supporting.

@vihaankedia8134

2 жыл бұрын

@@TechTrendsShameer do you know how to split 1 9v battery to 2 sets of cables

@maharashtravidhyalaya

5 ай бұрын

@@TechTrendsShameer

Sir, apne lighter ko kese modify kiya h, matlab vo only gas kese spray kar raha h...

Can we use led

Not working 😡😡😡😡

I LIKE PROJECT

@TechTrendsShameer

Жыл бұрын

Thank you

Bor i make this project connect the battery buzzer automatically alarm .pls help me bro Monday i have submitted the project fast bro pls

Its ok sir, but how can use it longtime?

Shameer Sir, please share the Circuit Diagram...... sir Output wire connected DO or AO..... sir please reply 🙏.....

@TechTrendsShameer

Жыл бұрын

Can you please check the video and check which Pin I mentioned?

@tazamulhaque6599

6 ай бұрын

! ?

Where can i get 1pin connecting wire

sir ye gas sensor 9 volt ki battery me heat ho ja raha he is liye properly work nahi kar raha he

What is the code of the gas sensor

I gave all circit connection but it din t give any sound

Bang kalau pakai 3.7vol disa enga yah bang

Great project 👍

@TechTrendsShameer

2 жыл бұрын

Thanks you so much.

Bhai mene apke jase he wire joda hai per mera buz nahi raha hai mera school project hai please help kare do

அருமை யான பதிவு ஐயா செ ஆனந்தன் விஞ்ஞானி இந்தியா

@TechTrendsShameer

5 ай бұрын

Thank you 😊

Can I use 12v supply in VCC

@TechTrendsShameer

Жыл бұрын

Please check the specification of your device before you use.

I have purchased a li-ion cell battery will it work for this project ???

@TechTrendsShameer

Жыл бұрын

Just try. It should work. I haven't tried with that.

@sakshishivalkar8333

Жыл бұрын

@@TechTrendsShameer thank you very much for replying 👍✌️😄😃😀

Can i use normal wire Because i have not jumper wire

@TechTrendsShameer

Жыл бұрын

Yes you can use normal wire

Sir it is contineously ringing

@suruchishahi1048

20 күн бұрын

same here even without gas

Can we use mq2 with 9v battery?

@TechTrendsShameer

Жыл бұрын

Yes

Sir can I use it for making fire alarm?

@TechTrendsShameer

5 ай бұрын

Yes you can

I tried this but tge buzzer keeps turning on anytime i connect the battery without any smoke, please what can I do sir

@smirti025

8 ай бұрын

Yes sir please reply

Sir liter me fire kyu nahi nikal rahi h, sirf gas hi leak Ho rahi h apke kese

Can we use mq6 sensor

@TechTrendsShameer

7 ай бұрын

Yes

Which sensore it's?

@TechTrendsShameer

11 ай бұрын

Gas Sensor

Can I use MQ-2 sensor

@TechTrendsShameer

Жыл бұрын

Yes. You can.

which gas sensor did you use mq 6 or mq 135 or another one

@TechTrendsShameer

2 жыл бұрын

MQ 135 www.electronicscomp.com/sensors-module/sensors/gas-sensor/mq135-air-quality-gas-sensor-module-india

@charanyenni7427

2 жыл бұрын

I am having mq2

@charanyenni7427

2 жыл бұрын

@@TechTrendsShameer can i use mq 2

@avix9903

Жыл бұрын

​@@TechTrendsShameer Sir, please share the Circuit Diagram...... sir Output wire connected DO or AO..... sir please reply 🙏.....

@gameblockers6669

7 ай бұрын

Sir I can't reach the website

do i need male to male of male to female cables

@TechTrendsShameer

2 жыл бұрын

You can use female to female or female to male wires. Then cut the pin from one end and take the wire out. Connect that wire to the battery and buzzer

@vihaankedia8134

2 жыл бұрын

@@TechTrendsShameer thanks for telling me!

Thank you sir i did this project for my chemistry and got gud score 👍

@TechTrendsShameer

Жыл бұрын

Great. Thank you. Please subscribe

@neelamnegi2796

8 ай бұрын

Sir mera to buzzer hi sound nahi kar ra please help

Sir ye pura saman kaha par milega please help me

@TechTrendsShameer

6 ай бұрын

Check video description

Can I get circuit diagram

SIR WE WANT SMOKE DETECTOR PROGRMMING CAN U PLEASE HELP US

@jubaeribnabdullah843

2 ай бұрын

You can contact with me, i can help you with programming

SIR can i use a 3 volt battery?

@TechTrendsShameer

5 ай бұрын

Try 9V battery

sir can we use alcohol sensor in place of smoke sensor

@TechTrendsShameer

Жыл бұрын

Yes

Hey can we also use normal connecting wires instead of those clip jumper wires pls reply?

@TechTrendsShameer

5 ай бұрын

Yes. You can also use normal wires.

Has dector 🔗links

which lighter did you use

@team_discoverers

5 ай бұрын

Gas lighter

@Amarmesham9277

4 ай бұрын

Please send the photo of gas lighter

Can i use mQ6

@TechTrendsShameer

7 ай бұрын

Yes you can

Sir entha conting wirse set pannalama

@TechTrendsShameer

8 ай бұрын

Question puriyala. Please make it clear.

How to make with mq 5 gas sensor

@TechTrendsShameer

Жыл бұрын

Replace the sensor

Does it work with Incense

@TechTrendsShameer

Жыл бұрын

Just try it

Mujhe koi batao ye sman kha milega

mine is working without the smoke or gas. any suggestions to fix it?😊

@suruchishahi1048

20 күн бұрын

same here

Will it works in 9v buzzer

@TechTrendsShameer

6 ай бұрын

Depends on battery power

@abhinabphukon956

6 ай бұрын

So you mean less power

@TechTrendsShameer

6 ай бұрын

Yes.

The smoke detector beeping when there is no smoke. What is the problem .

@user-rl3xg1uy5m

10 ай бұрын

Isn't there any mistake in connection

@user-rl3xg1uy5m

10 ай бұрын

Can you respond faster

can i use mq5??

@TechTrendsShameer

9 ай бұрын

Yes

@user-to1zy2sl1t

9 ай бұрын

hello, why mine keeps ringging even it don't have smoke plsss help mee

Does it work on match smoke?

@TechTrendsShameer

Жыл бұрын

Yes

Without smoke also buzzer is turning on

@santoshgondhale775

Жыл бұрын

Same

I used mq-6 but it's working by fire not by smoke

@TechTrendsShameer

Жыл бұрын

Try with MQ 135

😊😊

MQ6?

@TechTrendsShameer

2 жыл бұрын

MQ135

I am faling to make this becouse without sensing buzzer is going on ringing

@TechTrendsShameer

2 жыл бұрын

Can you please send your code?

@mikemierspadios7036

2 жыл бұрын

Same issue

@LegendGamings756

Жыл бұрын

Sme issue

the MQ6 needs 5 volts not 9 volts

Sir mera to buzzer hi sound nahi kar raha hai please help me

@TechTrendsShameer

8 ай бұрын

Please check the connection.

@neelamnegi2796

8 ай бұрын

@@TechTrendsShameer sir check kar liya phir bhi buzzer baj ra

@neelamnegi2796

8 ай бұрын

@@TechTrendsShameer connection aap hi ki jesa h

Did you install codes in the sensor

@TechTrendsShameer

2 жыл бұрын

No need to install any code.

Sir Mera Bina kisi smoke ka hi aawaj kar Raha hai

@TechTrendsShameer

8 ай бұрын

Check your sensor

What number of MQ gas sensors did you use?

@TechTrendsShameer

2 жыл бұрын

MQ 135 www.electronicscomp.com/sensors-module/sensors/gas-sensor/mq135-air-quality-gas-sensor-module-india

@prashanthkumar1359

Жыл бұрын

@@TechTrendsShameer can't we use mq2 sensor?

@user-pr8qk2sb9s

8 ай бұрын

Mq4

@gameblockers6669

7 ай бұрын

Sir I can't open this website

Bhai mera work hi nhi kar rha hai

Sur please reply quickly

does this also work with other detectors

@TechTrendsShameer

10 ай бұрын

yes

Can you please reply

@TechTrendsShameer

10 ай бұрын

Which sensor you are using?

Not working

Why mine does not work . Trust me I follow all steps exactly 100%wring,etc ... 1.My sensor works when I use Arduino uno . 2. Does not work when I didn't use any micro controller. . Any speculation s why mine does not work???

@TechTrendsShameer

2 жыл бұрын

There is a potentiometer on the back side of sensor. Can you please adjust that and try ?

@mikemierspadios7036

2 жыл бұрын

@@TechTrendsShameer clock wise or counter clockwise?? For highest sensitivity.

@TechTrendsShameer

2 жыл бұрын

Please adjust and try. Sorry I am not sure.

@jumbo999614

2 жыл бұрын

I bought 2 of this MQ6. I thought 1st one is broken so I ordered another one. Turned out that both are working fine. To get it work without Arduino, make sure you battery is not drained out. Same wiring as the video. But when connect a buzzer, you'll probably hear long continuous beep from buzzer. This is the reason I thought mine is broken. I immediately remove the buzzer and assume it's broken. Actually you should let it beep until it stops. Mine take around 9-10 seconds. You'll probably see green led come up on one side of the module. Adjust the potentiometer until the green led goes dark. Now test the gas sensor with cigarette lighter. I finally got both sensors to work. Hope you get it work too.

@adityapratamaputra2216

Жыл бұрын

@@jumbo999614 punya Saya hidup terus bang? Ini harus bagaimana

Bang kok gabisa

Not working😅

Not work

The buzzer is ringing without sensing the gas

@TechTrendsShameer

10 ай бұрын

Which sensor you are using?

@leela..14

10 ай бұрын

​@@TechTrendsShameermq 5 sir and it's ringing continuously without smoke also plz reply fast sir it's urgent

Thank you sir this is work ❤️🫂

Kis kis ka kam nahi kiya

@TechTrendsShameer

Жыл бұрын

Check the video

This is waste worst 👎👎👎👎👎

@TechTrendsShameer

10 ай бұрын

Thanks for your compliment. BTW can you show your good work ?

Bro l did this project about when batter is kept automatically buzzer is ringing .Bro give me your number

Not working

Not working

Not working

@TechTrendsShameer

Жыл бұрын

may i know the error ?

@nagoorjameen9667

Жыл бұрын

Sir ple u are cell no