Thank you for your time and help in doing the video.

Good clear no nonsense Tutorial, Thanks for taking the trouble to post.

SUBSTANTIAL Rick Motorsport Thank you very much for sharing what you know with us From Nick Ayivor from London England UK 🇬🇧

Thanks for your help. 😉

Perfect video

what software do I need to program the gear changes like you did?

interesting video for my by I changed my actuator but I still have the light of the box flashing and of key on the dashboard do you have an idea to erase all that

Did you actuated clutch actuator after install the new one?

Quality video mate. Had the same problem with my car, only to find out it was the actuator. Whats the point of hiding back plate and then to discover the reg while getting into the garage? 🤷‍♂️

Hello , gracias por la enseñanza del cluch actuator, pude extender la posicion del cluch , el mio lo puse asi

@felixafanador8300

3 жыл бұрын

Pero lo puse muy para dentro y Ahora pude ver el que Tu instalastes esta a mitad , voy acer lo asi , tratare , gracias

! NICE !

Hi Rick, brilliant video. Quick question, did you get a genuine Smart/Merc part or an after market one? Thanks

@Rick_Motorsport

2 жыл бұрын

Hi, I got it from Amozon, it's an aftermarket part. The link is in the description. Cheers

@y24ped

2 жыл бұрын

@@Rick_Motorsport Thanks very much!

I see some guys have the car in neutral or reverse before disconnecting negative. or am I good in park since i cant pull the keys out if i have it in neutral

Yep the clutch actuator is a pain but if you regularly grease it up it isn't that bad, I have also discovered by putting some tension on the actuator I found the gears engage better.

@fernandocuevas8123

Жыл бұрын

Hi¡ how did you do the tension? You mean move ir forward to the clutch? I will do that today, thanks

@ovu850

Жыл бұрын

@@fernandocuevas8123 hi, have you tried it?

I have the same issue where it won't go in reverse. But it drives. My BlueDriver code reader gave me a code 7053e. Beneath that it shows TCM: actuator stuck. That lead me to this video. At the KIA car dealer waiting to get it fixed.

Any idea car judders at pull off had flywheel and clutch change still does it peugeot 3008 semi auto

wat is the best scanner computer for a 2012 451 smart

Can you help me if just manual gear working but no automatic? Smart city-cabriolet car

Hi mate. is it possible to rester the gearbox if the clutch actuator is dead? when i try to relearn clutch position nothing happen. And it wont learn the gearbox. Thnks u

Hello, I have a mitsubishi colt, recently I changed the clutch, everything is ok, while I'm driving, when the gearbox changes from gear 2 to gear 3, there is a noise like a crack and then it goes into gear, do you have any idea what it could be? possible to be from the actuator? Thanks a lot

Could this cause the transmission light come on?

Thanks for the video, can we just change the clutch actuator without any computer and make it work? Or do we must have a computer ? Thanks in advance

@Rick_Motorsport

3 жыл бұрын

No you don't need a computer, just make sure before removing the old actuator, you mark it. so when installing the new one you put it on the same position.

Is the clutch actuator from Amazon reilable?

Tell us more about the gearbox learning part

@Rick_Motorsport

3 жыл бұрын

The gearbox learning process is mostly done when the clutch is replaced and its easily done with a computer! If you're just changing the clutch actuator you don't need to do the gearbox learning, but if you have a computer and you wanna do it, just go on transmission/special functions & gearbox learning and the computer will do the rest.

@javiervillarrealjr.4149

Жыл бұрын

@@Rick_Motorsport what software was installed on the computer?

What computer do you use

Replaced the clutch actuator spent over a thousand and the dumb car still does the same thing. I love it but can't depend on it. Chatters when backing up. Sticks in gear after the engine gets hot and have to fiddle around to get it to go Vibrates all the time. time to replace the ac squirrel cage fan again not the motor just the fan gets dirty and makes noise. I will also replace the cabin filter as it has been a couple of years since I replaced it. The Mercedes dealer is a long way from my house and It is hard to find someone to work on it. It is a shame I have had so much fun driving it passing others AT 80 on the turnpike. NEVER MET A PERSON WHO DID NOT WANT TO ASK ME ABOUT IT. MADE A LOT OF FRIENDS....

Hey man i have a problem with my smart fortwo 2008 when i insert the key and tried to start it the 3 bar symbol came out III horizontal. do you know what could be?? I did the thing to move the gear from P to D and started it again nothing happened. It will be so helpful if yoy know something. thanks man

@Rick_Motorsport

3 жыл бұрын

How's it going bro, I'm sorry I don't know what it could be. If you bring the car to me, I can diagnose it for you. Cheers

@huntmatthewd

2 жыл бұрын

Press and hold the brake. Turn the key to on, but don't start the car. Keep the brake on and you will hear the transmission learning the gears. It takes a few seconds to a minute to reset the thing.

Need help with my 2008 smart car i replaced clucth actuator will not strat

My actuator went out a few years back and I spent a ton of money to get it fixed. The shop was clueless and rips me off since it took them so long to figure problem.

@michaelmclean5088

2 жыл бұрын

Cost me 1200

@eddierosario1537

Жыл бұрын

This literally happened to me this week

Rick, where are you from? I saw a Texas license plate in the back ground I too have the same exact problem with my 2009 Smart Car…. Asking if you needed to do any computer programming at all after you installed the new actuator or did the gear learn on their own? asking because I don’t have a computer to program the smart car

@Rick_Motorsport

2 жыл бұрын

Hi Buddy, I'm from London. You don't need a computer to change the clutch actuator, just make sure before removing the old one you mark it so when installing the new one, it stays in the same position. If you want to do the gears learning process then you need a computer.

@roymtz5375

2 жыл бұрын

@@Rick_Motorsport Thanks Rick, Your Video Is A Big Help Bud…. You Be Safe Out There… Roy 🤓

@crud8244

2 жыл бұрын

@@Rick_Motorsport hello mate do you provide a service where i can bring my smart in to fix the same problem? (london)

@Rick_Motorsport

2 жыл бұрын

@@crud8244 I can do it for you, not a problem! I'm based in South East London

@crud8244

2 жыл бұрын

@@Rick_Motorsport hello mate is still have this problem have you got a email or phone number I can contact you on I am interested in bringing my smart car down to you to fix this problem I’m based in south west London

Hello bro , What computer have you got ?

@Rick_Motorsport

3 жыл бұрын

How's it going bro, I've got a snap on solus ultra.

@FastandFurious.

3 жыл бұрын

@@Rick_Motorsport Fine ,thanks , how about you ? I see ,it's too expensive though .

@Rick_Motorsport

3 жыл бұрын

@@FastandFurious. you can buy an Autel for a better price and does the same job as the snap on.

@FastandFurious.

3 жыл бұрын

@@Rick_Motorsport Thanks bro , take care .

Hi,where are you located please

how do i get rid of Three dashes flash in the instrument panel . Smart car 2004

@cmnightfaces

Жыл бұрын

Emergency break on, car in nutrial, disconnect positive cable, wait 30 + minutes, reconnect positive cable, turn key first key start position or first key turn (not the run position yet), you will hear the transmission conditioning itself for a minute, the move the shift through all the gear about two times D, N, R, N,D, N, R, P. Now turn the car key all the way to run. This should get ride of the 3 bars of death and will reset and can reset when the gear symbols start blinking. Mind start blinking when I reverse the car every now and then.

Olá amigo tenho um smart 451 não consigo da a partida do motor você pode mim ajudar tenho dtc de embreagem

it's funny how you cover the plate for just the first half of the video

Hello @Rick Motorsport, Hello friends, please i need help, I just bought a 2007 Smart 451 Diesel, When I start it there is the yellow engine light that stays on (1 time out of 5), On the other hand, when it stays on, the car apparently goes into Safe mode (Security) and therefore no function works, nor the change of gears, nor acceleration. I decided to change the actuator (the speed actuator) I bought a cheap one on Cdiscount without brand, Apparently it does not come from there, I changed the gearbox computer, it does not come from that either, I carried out a Mercedes diagnosis at a Smart Mercedes specialist in Marseille, the gearbox update etc. ... failed and the faults that come out are: P0805 “Clutch System Fault” (current in memory) P1700 "Resisting torque at gearbox input (current in memory) P1800 "Implausible gearbox data (current and stored event). Something else, The car sometimes starts cold and stops like it doesn't have enough power, so I cleaned the EGR valve, put it back in and it wouldn't start, I had to redo it started with a start pilot spray can, Then it worked normally, but yesterday it went out again when I started (cold engine), infact sometimes I have to accelerate a little so that it stays started (but only when cold on the first start) I should mention that I changed the glow plugs too. Anyway, my real problem is that famous yellow engine light that prevents me from driving when starting, I also specify that the Diagnostics guy, to find a method so that the light goes out when it is on just to drive, he plays with the gearbox by switching to R, N, D, 1 quickly several times in a row, and when he does this the light disappears, the engine speed changes (we feel like a slight acceleration), and then, once the yellow engine light is off, I can drive... Please help me, because I'm afraid to change the clutch unnecessarily, especially since the car is only 60,000 kilometers old. Thanks very much.

Sometimes its dont need repleacment just good oil most of cases its dirty and dry and wont work stuck

@epicsseven7686

3 жыл бұрын

That's what I saw on another video too. The boot sometimes needs lubricated.

@alekshandralves4893

3 жыл бұрын

@@epicsseven7686 yes because if you go to mechanic he Will put everything new because he wants gain money but sometimes its just need oil its dry because Manu years working all the time when you reach 100000 miles you need check that

@epicsseven7686

3 жыл бұрын

@@alekshandralves4893 I agree. But on the dual clutch, it's different.

Hi ive got P0900 , P0805 and P0901 as fault Codes it wont start

Got the same problem on my wifes car! Arggg

sorry bro how is the gears learnig, i repaced my clutch actuator

@Rick_Motorsport

2 жыл бұрын

If you want to do the gears learning procedure, you need a computer. Just go into transmission and follow the steps.

I have smart car 2008. It wasn't going into gear. I took it to Mercedes dealership they fix a clutch motor. I brought it home, drove once and it wouldn't start. I took it to a local mechanic who said now it have electrical issues. I only have 45'000 miles on it and so many issues. This car sucks!

@michaelsuzio4364

Жыл бұрын

I just started having electrical issues on mine at 190k

thats on a manual yes

Clutch actuator was not adjusted properly on install before tightening bolts.

Haha China actuator