Slim Can Conversion for MRSLOTCAR McLaren - More speed and better handling in a 1/32nd scale slotcar
Спорт
Slim Can Conversion for MRSLOTCAR McLaren - More speed and better handling in a 1/32nd scale slotcar
#slotcar #slotcarracing #slotcars #scalextric #slotcarsareback
Пікірлер: 17
Hello Jim, Thank you for breaking down the reasoning behind the switch. Looking forward to benchmark testing of before and after timed runs. Best Regards, Jack
I did My MRSLOTCAR McLaren 2 years ago and is a great and fast running car well worth it the up grade
Interesting stuff Jim. Thank you
Hi Jim, great video sir. I think I will put one together. Thank You!
Nice concept Jim, interesting to follow
Thanks!
@norcalslotcarsceneandvinta3518
5 ай бұрын
Thanks for your support. Funds from the Super Thanks will enable me to do more videos in the future.
Hi Jim when are you going to do an update for this project
@norcalslotcarsceneandvinta3518
4 ай бұрын
I'll try to get it done within the next week or so. I have to arrange to use one of the tracks in my area to do a proper evaluation.
Hi Jim, I am ordering a car and some parts tomorrow, I don't want to jump the gun but would you tell us/me what guid flag you might use on this (my favorite GOAT body) build? Thank you for your time and help!I think you might see me at the track soon too.
@norcalslotcarsceneandvinta3518
5 ай бұрын
Any standard 32nd scale guide will fit, but as long as you are starting from scratch you can get the MRSLOTCAR guides, MR2202 for wood tracks or MR2201 for plastic tracks.
@ipdtt
5 ай бұрын
@@norcalslotcarsceneandvinta3518 JIM, thank you so much for the fast replay and part #'s. This will be FUN!
Hi Jim can you tell me what the code is for the pod?
@norcalslotcarsceneandvinta3518
5 ай бұрын
MOTOR POD SIDEWINDER FOR FK050 "SLIMLINE" MOTORS WITH BUSHINGS MR2112 Use with 4.5mm Pinions/16.5mm Axle Gears OR 5.5mm Pinions/15.5mm Axle Gears
@larrycariglio909
5 ай бұрын
Thanks I have ordered all of the parts. Looking forward to the next installment. Looks like the motor shaft has to be cut down. What is the best way to accomplish this?
@norcalslotcarsceneandvinta3518
5 ай бұрын
A Dremel with a cutoff wheel. Put the motor in a plastic bag (with the shaft sticking out) so the dust from the shaft doesn't get into the motor.
@norcalslotcarsceneandvinta3518
5 ай бұрын
Also chamfer the end of the shaft so the gear fits easier.