Slammer -lowrider slammer- how to install a lowrider bike slammer the proper way
Жүктеу.....
Пікірлер: 52
@fredyates3061 Жыл бұрын
They are "Bolts" & "nuts". Not "Screws"
@MacNifty
8 ай бұрын
We call them socket heads screws. When you go to your material store... It is a SHCS or HHCS, BHSC etc. A bolt screws. Has threads to screw.
@therevolutionwillnotbeyoutubed Жыл бұрын
Is it possible to ride while slammed? Is there a way to adjust it so that I'm close to the ground while riding but not scraping the ground with my pedals. I barely wanna clear the ground but still be lower than stock.
@lht5dy31
Жыл бұрын
You can ride with it lowered, but you would have to change the cranks 2” smaller to make clearance
@Sillyrabbit._2 жыл бұрын
Will the slammer still hit the fender if it’s a straight fork .?
@AllonBakuth5 ай бұрын
Firme gracias.
@nonamedavid962 жыл бұрын
Is there a slammer with the twisted round tubes ?
@anaromero3325 ай бұрын
do you built your own bike
@mortenhansen34552 ай бұрын
Got a fit of 28" on my custom grandpa bike on my youtube page
@razah2339 Жыл бұрын
I need 2 may be 3 if the price is right where do I get them shipped to Ontario Canada
@yeetbro701110 ай бұрын
What parts am I going to need to buy if I don’t want a slammer but want my bike slammed
@Pursnikity_20022 Жыл бұрын
You don’t by any chance know anywhere they sell these do you? I checked what but the sellers discontinued
@OhMostBobulousOne20 күн бұрын
How many times do we need an explanation of not ending up with a dented bumper?
@Stearns-hj8kiАй бұрын
It can get lowered without hitting the fender I installed new forks and slamster it don't look the same
@nhickcox02 Жыл бұрын
Is that a dyno roadster in the background?
@lht5dy31 Жыл бұрын
Is there any kind of maintenance for when you want to lower an raise? Mines been really hard to move lately
@thesausage351
9 ай бұрын
Your bolts holding the fork and crown together are too tight. Undo the 2 bolts and maybe put a little grease on the bolts and then put a washer on before the nut and do them back up.
@lht5dy31
9 ай бұрын
Figured it out 😎
@ignaciogonzales73412 жыл бұрын
So if I change the 45° with the 90 it will lower? I don't have a crown. So I'm just gonna reuse the same parts
@_datuke_9291
2 жыл бұрын
No. The 90 will prevent the slammer from hitting your fender if it went lower. The 45 points the slammer directly to your front fender.
@kristenbroadway9995 Жыл бұрын
Can you delete the kickstand so it lays on the pedal to stand the bike up
@vultureline5918
Жыл бұрын
Yes . U can removed the kickstand. We have the kickstand when the slammer is up we used the kickstand. When the slammer is down we used the pedals to stand the bike
@bethantonioneto66048 ай бұрын
Olá eu sou o Beto. Sou serralheiro artístico gostaria aprender a fazer esse garfo. Gostaria saber se é possível enviar as dimensões e o passo a passo do trabalho
@juniorrosales7710 Жыл бұрын
Yo tengo una
@paulnewman75682 жыл бұрын
Hello, I'm interested in buying a slammer ,? Just slammer no crown or spring ? How much would it cost , shipping and all , I live in the bay area , Rodeo CA ! Thanks
@vultureline5918
2 жыл бұрын
323-309-3989 text me David
@peloncitosbikes431
2 жыл бұрын
I'm also building bikes as a hobby to do you guys also ship to Texas?
@nonamedavid96
2 жыл бұрын
I need one too with twisted round tubes if possible
@vultureline5918
2 жыл бұрын
Any information about lowrider bike parts needed text David 323-309-3989 text only . We specialize on building bicycles for celebrities, movie ,music & photo shoot .
@kristenbroadway9995 Жыл бұрын
How much does the slammer cost with the 90 degree
@vultureline5918
Жыл бұрын
Text David 323-309-3989
@Roblox_wrld10 ай бұрын
Mine just stays on the ground it does not go any where
@razah2339 Жыл бұрын
Can you ride the bike when the bike is slammed down??
@vultureline5918
Жыл бұрын
Some bikes !
@razah2339
Жыл бұрын
Need a couple of those slammers adapters
@Pursnikity_20022 Жыл бұрын
Is that a drop down fork?
@vultureline5918
Жыл бұрын
It’s a slammer will drop the front 3 inches “
@Pursnikity_20022
Жыл бұрын
I have one, I was talking about the fork. Looked different from your average style Im looking for someone that sells slammers
@pepehernandez1232 Жыл бұрын
👍👍👍👍🇺🇲🇺🇲🇲🇽🇲🇽
@superiormotorclub1278 Жыл бұрын
Where do I buy a Lowrider bike from ?
@ThatOneBagel
Жыл бұрын
u can buy frames on offer up, the bikes built are also there.
@ArtMonkey51502 жыл бұрын
What does a slammer do?
@Pursnikity_20022
Жыл бұрын
Lowers the front end
@Pursnikity_20022
Жыл бұрын
Front fork
@itsruf12 жыл бұрын
"Slammer"? It's a spring. Why a stupid made-up word?
@SamanthaTheyThem
2 жыл бұрын
Cause it lowers the front. Did you watch the whole video?
@itsruf1
2 жыл бұрын
@@SamanthaTheyThem no but why a made up stupid word?
@SamanthaTheyThem
2 жыл бұрын
@@itsruf1 Well you see, in the lowrider/car world "slammed" means your car, or truck or whatever you "slammed", is pretty much dragging on the ground. Example: Dude, check that '82 square body, its fuckin' slammed! So if you are from the car world and know the slang of the car world, a "slammer" makes total sense.
@itsruf1
2 жыл бұрын
@@SamanthaTheyThem @ForkSpring - say "fork spring" fast 3 times. That's your new nick name.
@juliafigueroa2819
Жыл бұрын
@@itsruf1 they didn’t replace the fork spring birdbrain, they replaced the rod inside the the spring. “ the slammer “
@Jdogg5110 ай бұрын
No need to put that nut cap when u already screwed in the fork bolt.
Пікірлер: 52
They are "Bolts" & "nuts". Not "Screws"
@MacNifty
8 ай бұрын
We call them socket heads screws. When you go to your material store... It is a SHCS or HHCS, BHSC etc. A bolt screws. Has threads to screw.
Is it possible to ride while slammed? Is there a way to adjust it so that I'm close to the ground while riding but not scraping the ground with my pedals. I barely wanna clear the ground but still be lower than stock.
@lht5dy31
Жыл бұрын
You can ride with it lowered, but you would have to change the cranks 2” smaller to make clearance
Will the slammer still hit the fender if it’s a straight fork .?
Firme gracias.
Is there a slammer with the twisted round tubes ?
do you built your own bike
Got a fit of 28" on my custom grandpa bike on my youtube page
I need 2 may be 3 if the price is right where do I get them shipped to Ontario Canada
What parts am I going to need to buy if I don’t want a slammer but want my bike slammed
You don’t by any chance know anywhere they sell these do you? I checked what but the sellers discontinued
How many times do we need an explanation of not ending up with a dented bumper?
It can get lowered without hitting the fender I installed new forks and slamster it don't look the same
Is that a dyno roadster in the background?
Is there any kind of maintenance for when you want to lower an raise? Mines been really hard to move lately
@thesausage351
9 ай бұрын
Your bolts holding the fork and crown together are too tight. Undo the 2 bolts and maybe put a little grease on the bolts and then put a washer on before the nut and do them back up.
@lht5dy31
9 ай бұрын
Figured it out 😎
So if I change the 45° with the 90 it will lower? I don't have a crown. So I'm just gonna reuse the same parts
@_datuke_9291
2 жыл бұрын
No. The 90 will prevent the slammer from hitting your fender if it went lower. The 45 points the slammer directly to your front fender.
Can you delete the kickstand so it lays on the pedal to stand the bike up
@vultureline5918
Жыл бұрын
Yes . U can removed the kickstand. We have the kickstand when the slammer is up we used the kickstand. When the slammer is down we used the pedals to stand the bike
Olá eu sou o Beto. Sou serralheiro artístico gostaria aprender a fazer esse garfo. Gostaria saber se é possível enviar as dimensões e o passo a passo do trabalho
Yo tengo una
Hello, I'm interested in buying a slammer ,? Just slammer no crown or spring ? How much would it cost , shipping and all , I live in the bay area , Rodeo CA ! Thanks
@vultureline5918
2 жыл бұрын
323-309-3989 text me David
@peloncitosbikes431
2 жыл бұрын
I'm also building bikes as a hobby to do you guys also ship to Texas?
@nonamedavid96
2 жыл бұрын
I need one too with twisted round tubes if possible
@vultureline5918
2 жыл бұрын
Any information about lowrider bike parts needed text David 323-309-3989 text only . We specialize on building bicycles for celebrities, movie ,music & photo shoot .
How much does the slammer cost with the 90 degree
@vultureline5918
Жыл бұрын
Text David 323-309-3989
Mine just stays on the ground it does not go any where
Can you ride the bike when the bike is slammed down??
@vultureline5918
Жыл бұрын
Some bikes !
@razah2339
Жыл бұрын
Need a couple of those slammers adapters
Is that a drop down fork?
@vultureline5918
Жыл бұрын
It’s a slammer will drop the front 3 inches “
@Pursnikity_20022
Жыл бұрын
I have one, I was talking about the fork. Looked different from your average style Im looking for someone that sells slammers
👍👍👍👍🇺🇲🇺🇲🇲🇽🇲🇽
Where do I buy a Lowrider bike from ?
@ThatOneBagel
Жыл бұрын
u can buy frames on offer up, the bikes built are also there.
What does a slammer do?
@Pursnikity_20022
Жыл бұрын
Lowers the front end
@Pursnikity_20022
Жыл бұрын
Front fork
"Slammer"? It's a spring. Why a stupid made-up word?
@SamanthaTheyThem
2 жыл бұрын
Cause it lowers the front. Did you watch the whole video?
@itsruf1
2 жыл бұрын
@@SamanthaTheyThem no but why a made up stupid word?
@SamanthaTheyThem
2 жыл бұрын
@@itsruf1 Well you see, in the lowrider/car world "slammed" means your car, or truck or whatever you "slammed", is pretty much dragging on the ground. Example: Dude, check that '82 square body, its fuckin' slammed! So if you are from the car world and know the slang of the car world, a "slammer" makes total sense.
@itsruf1
2 жыл бұрын
@@SamanthaTheyThem @ForkSpring - say "fork spring" fast 3 times. That's your new nick name.
@juliafigueroa2819
Жыл бұрын
@@itsruf1 they didn’t replace the fork spring birdbrain, they replaced the rod inside the the spring. “ the slammer “
No need to put that nut cap when u already screwed in the fork bolt.