SkyWatcher EQ6-R Pro Telescope Mount ASCOM DIRECT (EQMOD) without Hand Controller| Astrophotography
Ғылым және технология
In this tutorial I explain how to connect your SkyWatcher EQ6r-pro telescope mount to your PC or Laptop via the ascom direct driver (EQMOD) without using the hand controller.
LINK TO ASCOM DIRECT DRIVER:
sourceforge.ne...
LINK TO SKYWATCHER EQ6R-PRO TELESCOPE MOUNT:
USA OPTCORP: bit.ly/2SHvFcf
USA AMAZON: amzn.to/2tIR8I7
EU ASTROSHOP: bit.ly/2L9ZvkU
PLAYLIST: Sequence generator pro (setup gear, setup platesolving videos):
• Sequence Generator Pro...
Music: A quiet thought - Wayne Jones
/ astroforum
www.astroforum...
Пікірлер: 119
Great. Someone explained how to set up EQ mod. Many thanks
Thank you, so helpful, and great timing since I took delivery on my EQ6-R Pro yesterday ("Christmas in February"). Little things like setting the baud rate correctly probably saved me hours of frustration. Thanks again, and hope you get rewarded with clear skies over there for all of your efforts. -from New Hampshire, USA.
@AstroForumSpace
3 жыл бұрын
Thanks! And we finally had some clear skies last week, i was able to test my new edge HD telescope so I'm happy😉
@astroadventures3559
2 жыл бұрын
Dude I've been waiting just as long for mine. But it was supposed to get here January from optics planet I believe. But my wife found 20 of them at First light optics. And she ordered that one instead and it got here today. She just placed the order a week ago. So we cancelled our other order and the mount is amazing! I won't get first light for a few more days though, as the mount is still a couple days out.
Thank you so much Wido's AstroForum, I have been tearing my hair out over no connection and the Baud missmatch issue. Everything else worked but there's been no ASCOM to computer connection. I tried everything to no avail until I searched for tutorials and you put me right at 2:20 It was a close call for a minute there, I had a hammer at the ready for a perminent fix!
@AstroForumSpace
Жыл бұрын
Cool, thanks!
Thank you so much! I don't know what would I do without your explanation.
@AstroForumSpace
3 жыл бұрын
Happy to help!
Thanks very much for this easy to follow tutorial. I've now got my eq6 working with eqmod and phd2👍
Thank you for this! Made it so easy! Just got the new EQ6-R and it's already set for the night sky! Much appreciated.
@AstroForumSpace
4 жыл бұрын
Great to hear Sean, glad I could help. Clear skies!
@matty-lawrence-real-estate
Жыл бұрын
@Sean Gallagher Where you able to use your mount without the HC?
Love your videos Wido👍
Very nice! I’m glad you got it up and running. Sweet. This is a very clear and easy to follow video. Clear skies.
@AstroForumSpace
4 жыл бұрын
Thank you Garnett! Yes, it's still not perfect but I'm capturing the eastern veil nebula right now so I'm happy. Clear skies!
Thanks for this clear video - I also purchased the EQ6-R pro mount and got linked to NINA and changed com port but wouldn't work. Through your youtube video I saw that I had overlooked something, The Baud rate was set at 9600 had this changed to 115200 and now it works fine with the USB cable. 👍
@AstroForumSpace
4 жыл бұрын
Great to hear that, glad I could help!
Bro, how about if you do a vid related to the back focus and air gap between the camera chip and the telescope, focal reducer and field flattener. I guess it will help many people, since all new people to this hoppy are always complaining to this problem. Once again thanks for your vid and i wish you a great life and clear sky.
Thank you for this video just got my new mount and worked first time connecting to the mount with your advise
@AstroForumSpace
2 жыл бұрын
Glad it helped
Great vid as usual. True the Eqmode cable is way better than the ST4 cable. Tracking is more accurate and eventually much better images results. Keep up bro.
@douweodh4146
4 жыл бұрын
Especially since EQASCOM allows one to navigate by any suitable planetarium software, for instance Cartes du Ciel or Stellarium. Really like that possibility
I was trying out GS Server and could not get my mount to connect to GS Server until I saw your tip about changing the baud rate. GS Server now works fine. Perhaps I'll stick to eqMod since I know where to find troubleshooting issues. Thanks for the helpful video.
@AstroForumSpace
2 жыл бұрын
Great to hear it worked, thanks for the positive feedback!
Tru lu ru...i like that . Thanks, I just have a EQ6 r and I try it yesterday, very impressive mount, but fail connect properly, that is why I am here, thanks, all clear for me, greetings from Bonaire, Dutch Caribbean.
I have the EQ6Pro without the USB cable port on the mount like yours BUT, that same port for USB-A to USB-B IS on my Synscan controller. I'm guessing this is the correct place to connect the cable? My mount and controller were purchased in April 2019 - Appreciate any advice.
Nice, As always your videos are super easy to understand and very useful 👍👍👍
Thank you so much for this very helpful video, it made setting up Eqmod very easy with my EQ6-R Pro.
@AstroForumSpace
4 жыл бұрын
Glad it helped
This was really helpful! Thank you 🙂
@AstroForumSpace
4 жыл бұрын
Hi Helena, thanks. Hope you were able to get phd2 working, clear skies!
Just tried my telescope last night, it was a complete failure 😂. Will be trying it tonight again
@AstroForumSpace
4 жыл бұрын
Good luck!
First thank you for taking the time to make a video about connecting the mount to the computer but WELL you gave no overview of all the software you just presented, sections, menus, parameters. you went from window to window with no detail explanation so we dont freak out 😂 Remember that many of your followers are students or apprentices or yours. keep it up! love your videos!
@AstroForumSpace
2 жыл бұрын
Hi there, ofcourse. Maybe best to check out my website: astroforumspace.com If you check the tutorial section, you'll find a guide to the capturing program I use: Sequence Generator Pro. Hope this helps, good luck!
Thanks for all the helpful videos. Is there a way to connect your laptop inside your house with the mount outside your house without using a usb cable (ie some sort of Wi-Fi setup)?
Thank you!
@AstroForumSpace
2 жыл бұрын
You're welcome!
Nice and easy... Thank you, so much.
@AstroForumSpace
3 жыл бұрын
You are welcome 😊
Great work so much detail I don’t see anything pulsing on my phd2 Any idea why I also stopped guided few minutes after start guidance
@AstroForumSpace
Жыл бұрын
I don't know. Maybe a cable issue?
@AstroRef68
Жыл бұрын
@@AstroForumSpace From my scope to computer I’m using the cables are used for printing And from guide camera the cables are use for Samsung phones . You could be right.
Thanks. Do you just need the USB A to B cable. I thought you also needed a shoestring adapter or a shoestring EQ direct cable. Perhaps that was for older mounts
@AstroForumSpace
2 жыл бұрын
Hi Hugh, see my other response. I only use the USB cable, nothing else. Previous mounts did need an additional adapter, you're right, but the EQ6R-Pro doesn't.
So how do you star align for goto visual use with EQmod if you don’t have your EQ6-R Pro handset plugged in for 2 or 3 star alignment, and what about initializing your EQ6-R Pro every time you turn the mount on if you never want to use your hand controller .. is it possible to initialize an EQ6-R Pro with just EQmod and no hand controller? Thanks
@AstroForumSpace
3 жыл бұрын
yes, you can use eqmod with the eq6-r pro without a hand controller, that's what I do. I'm using platesolving in sequence generator pro and also stellarium to position my mount. I have other videos on my channel that explain how to connect your scope to these software programs. Clear skies!
Thanks for doing this for us.
@AstroForumSpace
4 жыл бұрын
My pleasure Mac. Clear skies.
Great vid! I'm having a bit of a hard time, though...when I download the eqmod from sourceforge and look at the file in the start menu, I don't see a whole list of files, I only see the controller and Uninstaller. I'm totally stuck there...
@AstroForumSpace
2 жыл бұрын
Hi there, weird. Did you manage to solve the issue? Perhaps try an older version of EQMOD?
@bigrobmartin1998
2 жыл бұрын
@@AstroForumSpace not quite yet. Gs Server does talk to my mount, but thinks home is 90°W which throws goto in APT 90° off, and Stellarium won't work with it at all...but holding out to figure out why EQMOD won't work. Thanks for the reply!
Fantastic video , i was doing the steps as you were explaining ,so i could understand them and all worked fine , as a foot note , do you have any videos on troubleshooting with the zwo cameras , i seem to have trouble getting it to work ,the computer wont recognize the camera , thank you again ,im subscribed
@AstroForumSpace
4 жыл бұрын
Hi Nelson, Thanks! I don't have a video on zwo cameras. I guess you downloaded the regular drivers from the zwo website? If yes, maybe try another usb cable? You can also check your device manager in Windows (is you're using a laptop). Check if the cameras are visible in that menu.
@nelsonrivera6575
4 жыл бұрын
AstroForum thank you
Really nice video
Do you need Eqmod to control the EQ6R-PRO within APT?
@AstroForumSpace
2 жыл бұрын
I'm not using APT, but it is the way to go as it connects your EQ6R Pro to an ASCOM standard - that is generally used to connect your gear to various astrophotography software tools.
hey kan jij mij helpen? als ik het instaleer en toolbox open doe dan op driver setup druk komt er opstaan "run time error klasse niet geregisteerd" ?
Hi, again ,so i finally got my camera working but there seems to be a problem , i was out tonight trying to image but all the exposure kept coming back blank at first i thought it was the gain so i lowered it but nothing happened , i was using the asiair app , no computer , but i was watching this video , and i was wondering can you make a video or do you have a video going to the process ,connecting the cables and where everything goes ,thank you , you can tell im a total rookie , could it be out of focus? anyways thank you again
@AstroForumSpace
3 жыл бұрын
Hi. Nelson, your camera was probably out of focus. It may help to focus on a bright star or the moon. Good luck!
Would you say this is more accurate than the hand controller/2-step alignment? This HC set up just inexplicably stopped being accurate. Ive now wasted two imaging nights in a row...did EQMOD solve this problem for others? I'm for sure adding PlateSolve2 with AP Tool...
@AstroForumSpace
4 жыл бұрын
Hi Derek. I use EQMOD in combination with platesolving in sequence generator Pro to avoid these alignment issues. Here are some videos on my sgp setup: kzread.info/dash/bejne/Z5yozaaDnciribA.html. Hope this helps. Cheers!
Im Having an issue where it says "ascom platform not found" do you know why this might be happening
Thanks very much. Do you just need the USB A to B cable or do you need a shoestring EQ direct adapter or cable with it?
@AstroForumSpace
2 жыл бұрын
Hi Hugh, I only use the cable. Clear skies!
I’m desperate for help. I have a eq6 pro, is it same setup for it? But I have usb/serial cable going through Synscan handset, so do I also need Synscan drivers?
@AstroForumSpace
Жыл бұрын
You can use direct accom on the mount. You don't need to connect the controller
@napper1496
Жыл бұрын
@@AstroForumSpace well,update. I’m not having any luck. The eq6 pro had a burned motherboard so took it back to seller. I then bought a brand new eq6-r pro mount and it had problems with buzzing sound so that has been sent back to skywatcher for a replacement coming soon hopefully
Hello, when I connect the hand control to the computer, it does not work with the computer. Of course, I should choose "director pc mode" and it works? Is this true
Hi, i have this mount! My question is regarding the (2.0) USB A to USB B cable will the length say 16 feet communicate ok with this mount? I want to make sure i get the correct cord. Thanks in advance & love all your videos
@AstroForumSpace
4 жыл бұрын
Gracias Mary! I'm using a 7 meter cable (23 feet) and have no issues.
Hi! Always enjoy your videos, very informative. I am in the market for a mount but I was thinking about the step below this one, HEQ5, do you know if I can use ascom as you show here on this video?? Thanks and clear skies!!
@AstroForumSpace
4 жыл бұрын
Hi Edwin, thanks! Are you referring to the HEQ5 pro? This one? bit.ly/3aeKWap To the best of my knowledge, this HEQ5 pro can be connected via the synscan handcontroller using an RS232 to USB cable. I had a similar solution for my Celestron AVX mount, have some videos on that on my channel and it should also work with SkyWatcher mounts.
@edwinsanchez1167
4 жыл бұрын
AstroForum cool, yes that is the mount and the reason I like it is because its $500 less than EQ6-R and I can use it towards a dedicated astro camera, I saw your vid. on AVX so basically you connect using hand controller vs directly to mount. Thank you again! Looking forward to your videos! Clear skies, stay safe!🤝
@AstroForumSpace
4 жыл бұрын
@@edwinsanchez1167 yes that's it. I read the newer HEQ5 mounts have a mini usb connection on the hand controller through which you can connect your mount to your PC. Clear skies Edwin!
Don't forget: you need to install the ASCOM Platform before EQMOD
So if I understand correctly, you don't need to get an EQDIR cable to plug in where the Handbox goes?
@AstroForumSpace
3 жыл бұрын
No, that's not necessary anymore. You can connect to the usb output on the mount. Cheers!
@pekwalker
3 жыл бұрын
@@AstroForumSpace That's great! Thank you. I just ordered my mount a couple of days ago and ordered a cable with it. I will have it as a backup suppose. Be well.
Hi, I have EQ35M-PRO and no matter what I do, I cannot make this working. I have connection through Hand controller with USB A-B cable. I got error messages either port not found whne I use binocular button, or if I set it manually to port 3, which I can see in device manager, it says Connection timeut. I tried it with my mini PC (Intel NUC) and also with my laptop. Same results. Tried also different USB ports. Any idea what could bea problem?
@AstroForumSpace
3 жыл бұрын
Hi Martin, did you update the software on your hand controller to the latest version?
@embeathome1
3 жыл бұрын
@@AstroForumSpace Hi, if you mean firmware, then yes, I did. A year ago, I had successful connection but then I abandonded astro stuff due to lack of time, and now after return to it, update of firmware was the firts thing I did. I don't remember exactly how I did it last year, but I had the same equipment, including the cable. But I think the method was slightly different. A year ago it was Win7, now it is Win10...so maybe something related to windows...
@embeathome1
3 жыл бұрын
Update - finally I got it working. But I hadto set Baud rate in Ascom toolbox to 9600. In device manager it works with both 9600 and 115000 and I think also with other rates. But in Ascom it needsto be 9600. I will test it more and see.
I use a skywatcher Eq 8 and the sequence generator pro. I got the eqmod cable (PegasusAstro EQDir USB stick for Skywatcher mounts with RJ45) so that I can control the objects with platesove2 .. now I have downloaded all updates and installed them. but none works. Can you help me please? what steps I have to take Thanks a lot
@AstroForumSpace
4 жыл бұрын
René, do you also have a direct usb connection on the mount? If yes, you could follow this tutorial and see if this works.
Do you have any experience connecting this mount via USB to the ASI Air Pro? I'm having a terrible time getting mine to work, it communicates but the goto is all wrong, even though it polar aligns and plate solves..
@AstroForumSpace
3 жыл бұрын
Sorry, can't help you there. But I'm considering the asiair myself so I hope there is a solution.
if you do not want to use the hand controller, can you use a FTDI go right to hand controller port? and do all same software?
@AstroForumSpace
2 жыл бұрын
Not sure what you mean. You can run a USB cable directly from the mount to your PC/Laptop and use ASCOM and EQMOD to control the mount.
Once you are connected, how do you do an alignment or is that not necessary as long as you are Polar Aligned?
@AstroForumSpace
3 жыл бұрын
Lately, I'm just making sure that I'm polar aligned within 1 arc minute using sharpcap and skip the star alignment. Clear skies!
@pekwalker
3 жыл бұрын
@@AstroForumSpace Thank's again. Be well.
Does this work with celestron evolution goto mount to asiair pro?
This can't be done with wifi?
@AstroForumSpace
Жыл бұрын
Nope, but there are many devices like the asiair plus that can control your mount over WiFi.
thank you , great explanation ,what OS you have , i have windows 10 . and im frustated because it wont recognize none of my hardware ,
@AstroForumSpace
4 жыл бұрын
Interesting. What astrogear do you use? I have windows 10. For some of the older software, you could try to set the compatibility mode to windows 7.
@frankskeen1310
3 жыл бұрын
Same issue here, Windows 10 sucks. I know they need more money every year, but win 10 is worse than win 7. I tried everything and the pc port with ascom does not see the port no matter which port I use, and yes I have the correct port number. Bummer !!!!
it says the ascom drivers need to be already installed on my PC before I install eqmod, where do I find this?
@AstroForumSpace
4 жыл бұрын
check this link: ascom-standards.org/Downloads/Index.htm
Thanks! Eqmod or the hand controller? Why Eqmod would be better? Could you please make a video with the NINA software? SGP is too expensive for me :-(
@AstroForumSpace
4 жыл бұрын
I really like sgpro but I'll check out Nina.
@MegaBrebis
4 жыл бұрын
@Astro Imager Could you elaborate?
Beste ik heb een vraagje ik weet niet van welk merk het filterwiel is maar wat mij is opgevallen is dat uw camera niet rechtstreeks hierop is aangesloten het zal wel geen afbreuk doen op de kwaliteit van de opnamen maar in geval dit een filterwiel zou zijn van ZWO wordt er toch aangeraden om de camera rechtstreeks op het filterwiel te monteren en begrijp me niet verkeerd dit is niet negatief bedoeld; en eigenlijk heb ik ook nieuws te melden heb ook een ZWO 1600 mono pro aangekocht en stort ik mij in een nieuw avontuur dus het kan zijn dat ik ook al eens raad van U vraag.
@AstroForumSpace
4 жыл бұрын
Bedankt voor de tip! Ik gebruik het extra verloopstuk omdat ik dan de camera in de rotatie stand kan draaien dit ik het mooist vind voor het object. Als ik direct de camera vastschroef dan moet ik het filterwiel draaien (kan ook) maar dan komt het soms gevaarlijk dicht bij mijn driepoot als ik iets hoog in het Zenith fotografeer. Verder zit nu mijn field flattener met het verloopstuk op precies de goede afstand. Maar ik hoor graag hoe het beter kan hoor en ik verneem graag jouw avonturen met de zwo1600. Groeten! Wido.
@Bogfra1
4 жыл бұрын
@@AstroForumSpace Goed om weten maakt het voor sommige objecten wel iets gemakkelijker om volledig in beeld te krijgen
Where is the driver link for this mount as I don't see it
@AstroForumSpace
2 жыл бұрын
sourceforge.net/projects/eq-mod/files/EQASCOM/
Hey, just got a SW eq5 pro where i connection usb to handcontroller, but it works fine at 9600b, Strange, but which protocol dose you use to guide in phd2?
@AstroForumSpace
Жыл бұрын
This is the eq6r pro, not a 5. I used to control it with eqmod and sgpro. Lately, I've also used ab asiair. There are many different options.
@tommyharbofriis
Жыл бұрын
@@AstroForumSpace Thx, yes i know, but iam sure the firmware is the same that control the Mount ofc not the gear ratio, but the rest is proberly very same, the only thing i wonder is which protokol to ise in phd2 in ordre to use pulse in-sted of st4 🙂
Hey, i have a HEQ5 v.5, and i have a usb B in my SynScan controler, but is didn't work connect with this usb B to A any advice for it? Tnx four your video, it very helpful! Greeting from Belgum !
@AstroDenny
4 жыл бұрын
If you use the controller, you don't use the eqmod driver. You'll need to use the synscan driver.
@visandaniel175
4 жыл бұрын
@@AstroDenny but i can't see my connection, and I can't connect to pc, I was trying to update the controller! So Is work usb b direct to pc ? From controller? Is not recognized...
@AstroDenny
4 жыл бұрын
@@visandaniel175 Not sure- I would make sure you have the correct tool to flash the controller and see in your windows device manager if the hand controller shows up as a device.
@AstroForumSpace
4 жыл бұрын
I never connected a skywatcher mount via the handcontroller. I had some trouble connecting my celestron mount via the handcontroller. In the end it turned out to be a bad cable. @Dennis is right about the driver, you'll need the synscan driver.
@justin-michaelemmanuel8770
4 жыл бұрын
@@AstroForumSpace @dennis ruzeski I am currently attempting to do the same thing, connect my EQ5 to my computer via the USB B to A cable that connects from the Synscan Controller to the laptop, just as you have done in the video (expect directly on the EQ6) All I would need to get this going is the synscan driver instead of EQmod correct? So the software I would want to be using is the ASCOM diver and Synscan Driver to have my eq5 mount connect to my laptop via the synscan controller? sorry for long winded question, just trying to figure this out and this is the only resource i have to help me lol. Thanks for any info.
I have always used 9600 Baud rate same as 100 other people I know. 115200 does not work for me.