Skunk2 rear camber kit install on my 96 Honda Civic hatchback cx Honda Civic /delsol 88-00 Acura 94-01
Жүктеу.....
Пікірлер: 54
@richardguerra17124 жыл бұрын
Seeing the joint made me subscibe bro
@qualitytouch
2 жыл бұрын
tru that....sub to mine to.
@NV_Tensa
2 жыл бұрын
Drug addict
@hydro6263 жыл бұрын
Just a heads up: you had the arms oriented the wrong way when you first put them on and then fixed them without saying anything. You might wanna put an annotation that mentions this. Otherwise great instruction.
@tkn24s3 жыл бұрын
Good video, i just lowered my EK hatch and same my rear wheels got hella camber. Imma order this and hopefully it works
@LilSMOOVEera Жыл бұрын
Just bought the same upper control arms for my integra and (1) came also flat, thank you for the tip man it was very helpful. I figured you just had to put a little elbow grease in it but didnt want to screw anything up ive waited a week for these things to arrive lol.
@pyrotechnic4759
3 ай бұрын
Hey looking to buy the integra rear kit I’m wondering about how much negative degrees it can go max. I need about 10 degrees to make my tires not hit the fender and am not sure if these are all I need
@outhere96224 жыл бұрын
To get that hella flush look because we about that life 😂
@Nighthawkrsx Жыл бұрын
Great video, thanks!
@theusedblink3 жыл бұрын
Thanks man. I'm gonna install one for some negative camber. I lowered my 96 civic coupe but the wheels wouldn't slant.
@dukebmxrider4 жыл бұрын
Hmmm, joint brought me to comment section.
@Snafu2346 Жыл бұрын
would it be good to put anti seize on the components?
@TheLatinlover95743 жыл бұрын
Thanks a lot
@Euro.sosa.mane74 жыл бұрын
How’s are the camber kits after 2 years ?
@itchyslothballs5 жыл бұрын
Cheers bro :D
@oneday385710 ай бұрын
Would that piece cause shaking?
@cognac8297 Жыл бұрын
The jack under the spindle is right . Should have removed the other jack. Then put a digital level on the trunk and jack the spendel until the car is level. Then adjust camber. I did it and mine are 0.. and if you don't level the rear of the car side to side with one wheel on. And if you just jack the car up to an unknown hight and set camber it won't be right when your done. Then put the digital level on the break rotor cause that's flat. And adjust..
@dudoydwex4 жыл бұрын
where can i buy this one sir?
@rc-nf3dy3 жыл бұрын
I know I'm coming in a little late, so I'm sure someone else already got but... bro, like, you totally coulda like counted the threads man 🥴
@riduanyusuf65186 жыл бұрын
Hisap rokok gulung tu hahaha
@edersanchezconchasotelo9068 Жыл бұрын
Q buen troncho de Mari jejejeje
@vanquishstorm38065 жыл бұрын
Is it recommended to apply grease to the rubber bushings prior to installing these arms? Silicone grease etc.
@g35tho11
2 жыл бұрын
Did you ever find out ?
@vanquishstorm3806
2 жыл бұрын
@@g35tho11 I never was able to find out for certain so I applied a little bit of Honda silicone grease inside and around the bushing
@g35tho11
2 жыл бұрын
@@vanquishstorm3806 makes sense . Just seen a skunk2 LCA bushing replacement and they recommend greasing the outside
@shhMyKill5 жыл бұрын
@latommyla to save the day lol
@jpenadelaify4 ай бұрын
My tires are leaning in on my 89 and eating my tires up. Will this shit fix mine. It's lowered on some speeding rods atm.
@AutoBodyEverything5 жыл бұрын
Also the rear driver side on my del sits way lower than the rear passenger side so the coils are all the way up on the driver side and all the way down on the passenger side and now the rear of the car is even. Is there a reason for this or was my delsol hit or something in the past?
@IzzySk10
9 ай бұрын
Ever figure it out? My coupe has the same issue
@lamydora457
7 ай бұрын
@IzzySk10 hondas are like that from factory you dont really notice it with stock height but once you lower it if you set the coils all 4 same height the driver side front and rear will be lowere than left side even if the coils are same height thats why you have adjustable coils so you can adjustit to be even.
@IzzySk10
7 ай бұрын
@@lamydora457 unfortunately I went with the truhart “basic” kit so I can only adjust dampening. Need to get a fully adjustable set
@AngelPerez-ug3sl3 жыл бұрын
When I tried to take out the front 14 bolt the trail arm started to expand. Should I keep goin ?????
@BigPowerstrokeguy
3 жыл бұрын
Yes that’s normal . The tabs will space out just a touch
@AngelPerez-ug3sl
3 жыл бұрын
@@BigPowerstrokeguy thanks but turns out the bolt was seized in the bushing
@throttlefilms2 жыл бұрын
so i didn't hand tight the inner 2 bolts, and now they are all stripped. someone help please
@juanv4375
2 жыл бұрын
Your fucked
@derekwilson80113 жыл бұрын
I have a 97 Honda CRV tires are leaning inward wearing them out alignment shop could not do it will these help and do I also need to get the inner toe ones so they can adjust any which way they want any advice would be greatly appreciated thank you
@BigPowerstrokeguy
3 жыл бұрын
If your car is lowered these help getting it all aligned . I would recommend
@derekwilson8011
3 жыл бұрын
@@BigPowerstrokeguy no my car is stock height I'm thinking the trailing arm bushings I got her to stiff I don't know I've got toe arms coming and Camber arm so hopefully we'll see
@derekwilson8011
Жыл бұрын
I have a 97 it's the car is stock height still having trouble with rear alignments wearing tires out I've got these brackets and I have the inner toe I'm going to install them hopefully they can align it
@andre49993 жыл бұрын
LOVE to see the honda cool kids using harbor freight tools....ya cant missem. Why would you spend 5x+ for snap on, matco, blackhawk when they last....but get lost or stolen???
@raeeqmohamed16072 жыл бұрын
Does a camber kit reduce the chances of replacing tyres frequently
@raeeqmohamed1607
2 жыл бұрын
And does it reduce risk of play on cv joints
@BigPowerstrokeguy
2 жыл бұрын
Yes if your lowered
@lilcoks4 жыл бұрын
Smoking one Green is atencion car enjoy
@richardguerra17124 жыл бұрын
I see alot of hondas with negative camber
@4thgenlude3974 жыл бұрын
Those are not coilovers those are Amazon or eBay 50$ coil over sleeves just FYI nothing wrong with it we have all had them once before no need to fake the funk 😂
@NV_Tensa
2 жыл бұрын
True 😂😂😂 I was like, what kind of skunk2 are those lol
Пікірлер: 54
Seeing the joint made me subscibe bro
@qualitytouch
2 жыл бұрын
tru that....sub to mine to.
@NV_Tensa
2 жыл бұрын
Drug addict
Just a heads up: you had the arms oriented the wrong way when you first put them on and then fixed them without saying anything. You might wanna put an annotation that mentions this. Otherwise great instruction.
Good video, i just lowered my EK hatch and same my rear wheels got hella camber. Imma order this and hopefully it works
Just bought the same upper control arms for my integra and (1) came also flat, thank you for the tip man it was very helpful. I figured you just had to put a little elbow grease in it but didnt want to screw anything up ive waited a week for these things to arrive lol.
@pyrotechnic4759
3 ай бұрын
Hey looking to buy the integra rear kit I’m wondering about how much negative degrees it can go max. I need about 10 degrees to make my tires not hit the fender and am not sure if these are all I need
To get that hella flush look because we about that life 😂
Great video, thanks!
Thanks man. I'm gonna install one for some negative camber. I lowered my 96 civic coupe but the wheels wouldn't slant.
Hmmm, joint brought me to comment section.
would it be good to put anti seize on the components?
Thanks a lot
How’s are the camber kits after 2 years ?
Cheers bro :D
Would that piece cause shaking?
The jack under the spindle is right . Should have removed the other jack. Then put a digital level on the trunk and jack the spendel until the car is level. Then adjust camber. I did it and mine are 0.. and if you don't level the rear of the car side to side with one wheel on. And if you just jack the car up to an unknown hight and set camber it won't be right when your done. Then put the digital level on the break rotor cause that's flat. And adjust..
where can i buy this one sir?
I know I'm coming in a little late, so I'm sure someone else already got but... bro, like, you totally coulda like counted the threads man 🥴
Hisap rokok gulung tu hahaha
Q buen troncho de Mari jejejeje
Is it recommended to apply grease to the rubber bushings prior to installing these arms? Silicone grease etc.
@g35tho11
2 жыл бұрын
Did you ever find out ?
@vanquishstorm3806
2 жыл бұрын
@@g35tho11 I never was able to find out for certain so I applied a little bit of Honda silicone grease inside and around the bushing
@g35tho11
2 жыл бұрын
@@vanquishstorm3806 makes sense . Just seen a skunk2 LCA bushing replacement and they recommend greasing the outside
@latommyla to save the day lol
My tires are leaning in on my 89 and eating my tires up. Will this shit fix mine. It's lowered on some speeding rods atm.
Also the rear driver side on my del sits way lower than the rear passenger side so the coils are all the way up on the driver side and all the way down on the passenger side and now the rear of the car is even. Is there a reason for this or was my delsol hit or something in the past?
@IzzySk10
9 ай бұрын
Ever figure it out? My coupe has the same issue
@lamydora457
7 ай бұрын
@IzzySk10 hondas are like that from factory you dont really notice it with stock height but once you lower it if you set the coils all 4 same height the driver side front and rear will be lowere than left side even if the coils are same height thats why you have adjustable coils so you can adjustit to be even.
@IzzySk10
7 ай бұрын
@@lamydora457 unfortunately I went with the truhart “basic” kit so I can only adjust dampening. Need to get a fully adjustable set
When I tried to take out the front 14 bolt the trail arm started to expand. Should I keep goin ?????
@BigPowerstrokeguy
3 жыл бұрын
Yes that’s normal . The tabs will space out just a touch
@AngelPerez-ug3sl
3 жыл бұрын
@@BigPowerstrokeguy thanks but turns out the bolt was seized in the bushing
so i didn't hand tight the inner 2 bolts, and now they are all stripped. someone help please
@juanv4375
2 жыл бұрын
Your fucked
I have a 97 Honda CRV tires are leaning inward wearing them out alignment shop could not do it will these help and do I also need to get the inner toe ones so they can adjust any which way they want any advice would be greatly appreciated thank you
@BigPowerstrokeguy
3 жыл бұрын
If your car is lowered these help getting it all aligned . I would recommend
@derekwilson8011
3 жыл бұрын
@@BigPowerstrokeguy no my car is stock height I'm thinking the trailing arm bushings I got her to stiff I don't know I've got toe arms coming and Camber arm so hopefully we'll see
@derekwilson8011
Жыл бұрын
I have a 97 it's the car is stock height still having trouble with rear alignments wearing tires out I've got these brackets and I have the inner toe I'm going to install them hopefully they can align it
LOVE to see the honda cool kids using harbor freight tools....ya cant missem. Why would you spend 5x+ for snap on, matco, blackhawk when they last....but get lost or stolen???
Does a camber kit reduce the chances of replacing tyres frequently
@raeeqmohamed1607
2 жыл бұрын
And does it reduce risk of play on cv joints
@BigPowerstrokeguy
2 жыл бұрын
Yes if your lowered
Smoking one Green is atencion car enjoy
I see alot of hondas with negative camber
Those are not coilovers those are Amazon or eBay 50$ coil over sleeves just FYI nothing wrong with it we have all had them once before no need to fake the funk 😂
@NV_Tensa
2 жыл бұрын
True 😂😂😂 I was like, what kind of skunk2 are those lol
420 likes
420
No torque specs lol