Oh what a load of nostalgia. See that printed circuit board in back of odometer dials in 12:30? It says VDI Nitra in top left corner. It is acronym for former Výrobné Družstvo Invalidov Nitra. VDI was something like: Manufacture cooperative for invalids and Nitra is nice town in middle of Slovakia. Part of former Czechoslovakia where these cars were engineered and manufactured. It was special factory (not only one in country) where disabled people can find job with enviroments according to their disabilities. If someone was deaf or missing one or both legs, he/she could work with their head or hands. In this case probably assembly electronics of all sorts. Škoda itself is assembled in Mladá Boleslav in Czech republic till these days. BTW there is a brand new huge factory Jaguar-Land Rover in Nitra, or rather in outskirts of the city opened recently this year.

Step by step making everything work, and even an anti-rust treatment, Ian is in love with the Skoda Favorit.

I really love these longer Hubnut repair videos. It's one thing to buy an inexpensive car yet another to make the commitment to fix all the little things it needs to be perfect. I'm in the latter camp of thought so I really appreciate Hubnut's progress on this awesome little car. I think I would have put the odometer around 60,000 versus the 100 he chose since it would be a more educated accurate reflection of the miles on this car. Quality job replacing all the bulbs while he already had the cluster removed. No need to go back in there a second or third time. Lol. Great video.

To check that the temp gauge is working, remove the wire and earth it out to the housing, if the gauge rises to the top then the gauge is fine, proving that the fault lies in the sender or thermostat. Hope this helps.

Is it just me or does anyone else binge watch Hub Nut.... Really addictive viewing

I'm enjoying getting to know the Skoda she looks to be in brilliant condition. Isn't it great when you have success when effecting a repair. We even got a bonus ride in little TWC . Love it👍

HUBNUT ,I'M SO GLAD YOU KEEP THESE OLD RARE GIRLS ON THE ROAD , RESPECT TO YOU MATE ,LOVE YOUR VIDS ,KEEP IT UP BUDDY , TOO MANY OLD CARS ARE GONE NOW , LOVE YOUR WORK TAKE CARE!!!!!!

Cheap fixes that make all the difference are the best ones.

Watching you adjust the numbers on the milometer reminds me of a car sold at the MG/Rover dealership I worked at back in the day. We had a preregistered Rover 200 that never sold and had sat unused in the compound for 2 or 3 years. Nobody was going to buy a 3 year old brand new car, so the sales manager hatched a somewhat iffy plan. The mileage was clocked by adding (I think) about 12k miles to the delivery mileage the car already had, and then he used it as a runabout for about a month or so. The car was then cleaned up and put on the pitch for sale as a 'low mileage' second hand car. It sold like the proverbial hot cake. The dealership had pulled off a similar trick with a batch of Montegos that had just sat in a compound for a long period of time the year before. I was quite shocked to learn at the time that though it's certainly illegal to roll back a vehicle's mileage, it is not illegal to add miles to a car's reading. I soon learned that this sort of thing was just another day at the office.

@imnotamechanic3491

5 жыл бұрын

It's not illegal to 'clock' a car, it's only illegal to knowingly misrepresent a car for sale, so even if you increased the mileage it would still be illegal. HubNut just clocked his car, but he hasn't broken the law, unless he sold it and tried to convince someone his 24yr old Favorit was showroom fresh, which, as nice as it is, is gonna need more than a mop to get it like that. The difference between increasing and decreasing the mileage is that if you increase it, it would be difficult for people to accuse you of trying to profit, as well as the obvious fact it would be much harder to spot, as ownership under certain people does make the mileage shoot up, like those with long commutes.

Well done Ian for getting the odometer working and we even got a bonus ride in TWC as well.

Never thought I’d be sat here watching hubnut take a favorit speedometer apart 🤣 pretty fascinating if I’m honest

Go the Favorit! I have replaced the thermostats on several cars that I have owned and they always fail slightly open. You don't notice it until winter when you find that the engine won't warm up. I once had a Nissan Pulsar where the temp gauge showed normal but the thermostat was stuck open and the engine ran so cold the heater didn't work. It took ages to figure out what was going on and by that time I had got rid of it and gone back to a Corolla, which also had a stuck thermostat! But at least it was simple to fix, unlike the Nissan. It was heart in mouth stuff watching you take the odometer apart. What a satisfying achievement.

@robinturner2300

5 жыл бұрын

Pauline Hunter better to fail open than closed and cook the engine

Good work there Ian. It’s interesting how few screws need to be removed to dismantle the dash, yet the car is still rattle free. The build quality really has to be admired.

The inter-action is good on a growing channel such as Hubnuts & he always acknowledges comments. On bigger channels I don't bother, whats the point ........

It’s so pleasing to mend something like lights and, in your case, speedo. Simple things that make a huge difference to the whole driving experience! Great result! I’m loving this car!!👍👍

Your travels in the invacar always reminds me of the 170 mile drives I'd make from Aberdeen to my grandparents in the north Highlands in my 1978 Vauxhall chevette GLS. You'd be planning every overtake and hill ascend about a mile ahead. Bloody eyes were out on stalks by the time I'd get there. Happy memories!!!

About ten years ago a friend would occasionally borrow his dad's Citroen, might have been an XM. The speedo (and odometer) would only work intermittently, like register a few thousand km, then stop altogether and kick in again. I think he said it'd been working about half the time for years. Driving that thing was... interesting. I think it's also the only car I've ever co-piloted (changed gears from the passenger seat so the driver could drink from his water bottle without letting go of the wheel). Fun times!

Braver man than me taking the speedo/odometer down to its constituent parts 😱, Well done getting them back together and working properly. 😅 Looking forward to seeing the Favorit all spruced up, and doing justice to what it is... a good, sound, well sorted bangernomic buy.

Excellent stuff as always. I've been very much enjoying the Favorit story so far. On your (was) live new car reveal, my loud exclamation of joy at your choice of vehicle piqued my wife's interest very briefly, until she realised it was 'just that Nutty Hub bloke again'...

I really enjoy all of your videos, as a Škoda enthusiast I particularly look forward to updates following your sympathetic restoration of this gorgeous Favorit, you’re doing a great job, keeping a classic Škoda on the road!, maybe we could welcome you to the Škoda Owners Club UK, you, Mrs Hubnut and your Favorit would be well received at any of our meetings !! x.

@HubNut

5 жыл бұрын

That could happen. I'm good friends with the club magazine editor. ;-)

@skodakatie7341

5 жыл бұрын

HubNut yes I know Rob well, he lives in Wales also doesn’t he lol ! x

Since watching my first video of yours a couple of weeks ago, I’ve been inspired to do all the jobs needed to bring my Astra (2004) back to its former glory (new wing mirror, rear quarter light, various bulbs, wheel trims and service etc, it now looks like it just stepped out of the factory).. so thank you Mr H for the kick up the backside I needed! 😊👍

I bought a brand new Skoda S110R back in 1976. Nice car inside all black and soft padded but the exterior rotted badly. One day I had a puncture and as the wheel nuts cracked undone, it turned out that it was the studs that had snapped off like carrots. Such was the quality of the steel. The steering box (which was worm and peg ... think pedal car) needed oiling regularly but the nipple was hard up against the boot floor so most never got done. Making a hole in the boot floor and making a removable panel was the cure for that. King pins also had grease nipples and play could be adjusted as they wore. Replacement kingpins revealed that the wearing surface was a yellow coloured nylon. I'm sure that Skoda's improved as the years progressed, even before they came under VW's wing. I think the Favorit is a transition period car ... pre VW but continued into the VW era.

Well done Ian and Mrs Hub Nut! With the needles in red the whole set up is spot on! and its working as it was designed to do!

I had a Favorit hatchback, bought new in 1994. I ran it for 84000 miles and only had to change windscreen wipers, tyres and brake pads. Nothing ever went wrong. It was my second SKoda after an Estelle 130 withe the 1300 engine and 5 speed box. That also served me for 80.000 miles without any trouble or failure. I had 6 Skodas, ending with an second hand Octavia. Modern Skodas are too expensive, so I have run 2 Diahatu Sirions in recent years and now have a Suzuki Splash, which has been perfectly reliable for 37,000 miles.

The best bit was the Took drive, nice to see it coped with with what nature threw at it.

Good to see TWC out and about, and picking up parts for other members of the fleet! 👍

A tip for testing/repairing rear hatch seals (possibly any door seal) I was given was to remove it and feed a length of the plastic-coated type washing line through it and cut to fit. It expands it enough to cure the flattening out and usually re-seals it nicely. It worked a treat on a Renault 14 I had the same issue with. Was meant to be a test and then replace the seal but it just stayed in there forever as it was doing the job. One of those permanent temporary fixes...

That Favorit is is in better nick underneath, inside and out than my 14 plate fiesta. That's truly amazing. I think you really have struck gold with this one Ian.

@bazasulli4975

5 жыл бұрын

@@TomAlter1000 If I were to tell you what's wrong with it I would need this whole comment section. Moral of the story is don't by ex lease cars.

I'm glad my monthly contribution made it to buy 1 and 1/3 of halfords dash bulb :) Thanks for yet another great video, Ian

Just stumbled across the channel. I am from the United States but I am fascinated with this car!

Well done with the odometer fix Ian, and very brave too! I tried to repair a stuck ignition switch on my Granada a few years ago, two hours before the car was need to get me to work. Removed a circlip and 'TWANG' springs and switch bits all over the car! Wonderful.....Oh dear!

I hope you get paid by the Welsh tourist board, it will be a new year resolution of mine to spend a few days there, to drive those wonderful roads and enjoy the spectacular scenery. Favorit looks to be in Superb condition, no obvious rust, all red paint turns flat pink just needs cutting back, have to say its a damn good looking car. I mean that. I would keep it de-badged, keeps a bit of mystery! Never ceases to amaze what the great unwashed still say about Skodas.

A good fix i love how easy that Skoda is to work on

Definitely liking the Skoda and it certainly fits the ethos of this channel. Like the idea o every journey in an Invacar being an adventure - reminds me of my 1960 Ford Popular 100E!

Well impressed, full on dive into the dash.Seek and seal the windows in the back first then underseal, That's a good chap! Felt Mrs Hubnut, could go for rouge nail varnish, Bling always fore-fills greater achievement. Cheers all.

I have never seen such an enjoyable video about dashboard dismantlement and reassembly. I also agree totally with your remarks about us having reached 'peak car' by about 2000. This is a fine and humble example of a quality vehicle that is user-friendly. Look after something like this and it could last a lifetime. Modern cars are hideously over-burdened with unnecessary extras and engineering complexity that only leads to more ways to fail and prevents owners from understanding and being able to maintain their vehicle efficiently.

It has a beautiful shape, the rear window heater! Fantastic!

Fixing the speedo before the leaking chimney 😂😂 Loving the priorities mate 😂😂

@HubNut

5 жыл бұрын

To be fair, there's no way I'm getting on the sodding roof!

Turning the clocks back for winter, Hubnut style! Excellent Skoda update.

You must be the most patient man I've never met.

I miss my old ‘92 Favorit. It was great and crap at the same time. Absolutely bomb proof, simple, reliable but slow and a tad unrefined yet I would have it back in a heartbeat. Strange?

Congratulations on the successful (so far) fix of the odometer and trip meter. I hope it works for a decent period for you. And congratulations of straightening out the inflicted wobbles to the temperature gauge face. I probably wouldn't have noticed that until I'd put everything back together when it would have instantly annoyed the hell out of me...

On my leaky Land Rover, (Freelander rear door, what a design!) I removed the seal and cleaned it in soapy water, then used rubber restorer in copious amounts. Didn't leak any more. Nice cheap fix.

gosh moved from Pembs to Perth Watern Australia Last year, video brought back memories of teh welsh weather! Glad top see Twc running

Good work and good to see helpful and positive comments. Thanks for sharing.

A felt tip pen dial restoration, love it. Look forward to seeing how effective the mopping will be.

My old van used to run cool in the winter,I used to block half the rad of with cardboard,did the trick

Hi Ian< love all your videos , please keep them coming, as an ex longbridge Apprentice I still have lost of affection for the "Austin cars" working with sir Alex in the south experimental workshop. Great days. it may help, the Skoda has had a number of MOT "Advisory notice" in the area of the steering rack: March 2016 Nearside Front Steering rack gaiter deteriorated: and FAIL March 2011 Offside Steering rack gaiter split. with these failing sail. grit etc will of got in there and over time you now have the play!

Thoroughly enjoy these detailed vlogs mate. Great job 👍

The mug boxes are very impressive, very sturdy 👍

Excellent display of skills there, congrats on the progress.

i just love how simple everything is makes me quite happy. i can imagine working in a middle/lower class brand garage really wasnt difficult in the day as things seem verry similar to the way things on the bx work. though skoda and citroen are verry different brands

Nice work Ian , the start of full restoration on the Skoda, and change your thermostat and give it a good flush out , I really do like this little car , I’ve always been like it when I know I have bought something good

Changed the thermostat on me Mum's 1.4 Fabia & it made a massive difference. Not the same car I know, but it's still a Skoda engine. She bought it in 2009 with 36000 miles on it. It's only reading about 50000 now. Shops & back but the shops are 4 miles away & it gets chance to warm up!

Great fix...Well done Hubnut!

Not the most elegant solution to the boot leak, but a quick & reliable fix that has worked wonders for me & leaky old cars: Blu-Tack. Put a bit around the rusty areas & see if it helps.

Rustproofing, does that mean he Favorit is to become a long-term vehicle on the Hubnut fleet?. I had a Favorit back in the mid-'90s, they were an underrated car and it's good to see your Favorit getting some TLC.

Smashing video Ian, love the tinkering about with stuff. Looking forward to seeing the Kitten rebuild.

The spare tire is original -- Tigar is a brand of tires from Serbia. And as you might expect from that, they were also originally equipped on Yugo cars.

Nice piece of light work this video.... And I like the way you use the 'W' in TWC as a Welsh vowel. Da iawn.

Dark side of the dash. Nice fix there you did. Once I took my 406 dash apart (sort of) to change a bulb or two, with the right tools (torx is a good bet on French cars) and patience reasonably easy fix can be DIY no worries. You went in deeper, respektos for that! There is an amount of satisfaction hard to explain when you can mend or fix your own car. My 1007 doesn't have a temp gauge but the fan works, I have checked that bit out. Strange choice not to have a gauge but hey it is French!

Fantastic. The underside is remarkable and would suggest the mileage is low. You never know the abuse of all those speed bumps in London may of caused premature issues with the steering rack. Or it could be just an iffy part. I hope you can cure the moisture issue, as this time of year it doesn't take long to cause damage to that immaculate metal work. I hope you keep enjoying it, and I'm looking forward to more videos and putting up my hubnut calendar!

Again, great video. Enjoyed watching it.

It’s a change to see someone doing videos on ordinary everyday cars instead of the kind of cars most people can’t afford

Well done pal 👍 the simplest fixes are so satisfying 😂 I loved that felt tip hack! The cluster looked rather fiddly too seperate! Halfrauds prices on a lot of items are outrageous...

painted needles......excellent!!........Being crap at working on cars, I once wired up a digital clock to my beige Fiat Uno in the early 90's.......pretty pleased with myself until I turned the ignition on and found it not working.......I'd forgotten to reconnect the wiring to the block connector before putting the steering column back together.............it only took me four days to suss out what I'd done....... what a muppet I was/am!! Any time you want a hand dismantling a car let me know, just don't ask me to put it back together again!!!

Great video and you have the patience of a saint sir !!

And that Ladies and Gentlemen is how HubNut does that. Excellent !

Really enjoyed this vid. Nice speedo job (no pun please) and a real good mix of cheap diy fix, combined with a sense travel .

Very satisfying to repair things on the cheap. The price of those bulbs was a tad expensive , but in Wales on a Sunday , you was lucky to get any.👍

Good fix! Love the non concentric steering wheel. Reminds me of an early mk3 cortina wheel 😊

This video evokes such nostalgia! My good friend Steve had a red Favorit and removed the dash binnicle (binnacle?) and replaced it with cardboard......you know light weight race spec etc.

Good job! Keep those repair videos coming.

Awesome video. Looking forward to you sorting the pink paint.

Im beginning to warm to to it, and nice to see TWC out for a run

Thought i would share with you a funny story. Two days ago i decided to change the transmission oil in my girlfriends 1.5 Dci Renault modus, easy enough, drained out 1.7 litres and put in around 3 litres so no wonder it was a bit hard to find the gears. Took it for a test drive and the gears were now easy to find BUT i got 100 yards down the road and the STOP warning light came on the dashboard and a warning beeper started chirping. So, i pulled over and got out of the car to look under the bonnet but i glanced back down the road i had just travelled down to see a long, thick streak of oil! It wasn't gearbox oil, that was fine, it was engine oil! For some reason the oil filter must not have been tightened on it's last service (not done by me) and had come loose and all 4.5 litres was pumped out all over the road. My neighbours don't seem to be talking to me now due to the oil slick :(

I like getting the little dead bulb units out and pulling the tiny cap bulb out of it - they are usually removed quite easily. You can then put a 12v 3mm LED with an internal resistor in their place in the original moulding and solder them to the contacts. (12v 3MM LEDs with clear cases are the best for automotive use, they are available irregularly via eBay or electronics distributors - I try to stock up as and when I see them for sale as they last forever... ) On my old Saab I did this so I now have red backlight on the rear fog switch, white on the front fog switch, amber on the heated seats, basically anything to get rid of the sickly greenish backlighting it came with from the factory

Clever stuff hubnut 👍

Great video. My Felicia had a knocking sound up front only when I went over big bumps. After replacing many things all it was , the right hand top mount bearing had collapsed.

@HubNut

5 жыл бұрын

Hoping is isn't that. Certainly some play in the rack.

You have the patience of a saint, I wonder how things would differ should you not be recording! Great vid, made me laugh. The Favorit is certainly growing on me.

Excellent...!! A new Skoda video. 🙂

The dash comes apart pretty easily with just one tool, no need to use a 'Brummie Screwdriver', I like that.

I had an Audi A4 Avant 1999 and the windows steamed up really bad in winter.Found out it was a leaky boot seal where it had flattened over the years so got a bottle of RainX Antifog and worked a treat till I sorted out a new seal.

Tuk! It’s nice when you can get a few things fixed in one go.

A small amount of Oil Emulsion or ‘Mayonnaise’ in the Rocker Cover and Oil Filler Cap is usually a sign that the car has been used for short journeys in a relatively cold climate. The engine is barely able to achieve its optimum operating temperature. This can be termed as ‘Condensation Sludge.’ Different materials and their Mass used for the Rocker Box, and Cylinder Head (Steel -v- Aluminium Alloy, etc.) will also make a difference too. Another fundamental cause will be ‘Climate,’ as the Rocker Box is the first zone to cool when the engine has stopped - Condensation Sludge hardly ever appears in Hot Climates! Large amounts of Emulsion will indicate more severe problems such as a Failed Cylinder Head Gasket, Worn Piston Rings, or Leaky Valves, etc. Water will also be present on the Dip-Stick. However, some cars are notorious for ‘Excessive Sludge.’ (Old Vauxhall/Bedford HA, HB and HC Engines in particular) Typically, a Compression Test will highlight serious problems within the engine, thus isolating ‘Condensation Sludge’ as the culprit. The Emulsified Deposit forms when water is mixed with oil, and ‘Whisked’ with the general clatter of the engine. Water (from combustion) gets in to the Rocker Box through the ‘Blow-By Effect.’ The Gasses and Vapour in the Rocker Box are ‘Scavenged’ with a Crude Ventilation System - Usually a piece of Rubber Tube, running from the Rocker Box to a point just before the Inlet Manifold. There can also be a ‘Tee Joint’ with a second tube running to the base of the Air Filter Housing (Vauxhall Failed Solution). However and to work effectively, there needs to be an ‘Adequate’ (but not excessive) FLOW of air - Ideally ‘Incoming’ from the Air Filter Housing, and then ‘Outgoing’ from the Rocker Box to the Inlet Manifold, from opposing ends of the Rocker Box. The Vauxhall ‘Luton Abscess,’ was caused by almost non-existent ‘Scavenging Air Flow!’ - Incoming and Outgoing Air were attempting to pass through the same ‘Y Shaped Hose.’ Inlet and Outlet air also used the same Spigot. Also, the Spigot Block on the Inlet Manifold, had a miniscule ventilation hole that became blocked with sludge as soon as you looked at it! In some severe cases it could also send sludge up to the Air Filter Box, contaminating the Air Filter Matrix, before completely blocking the inlet tubes - Zero Crankcase Ventilation, thus generating even more ‘Mayo!’ Vauxhall’s response at the time was “No need to worry, Sir! - They all do that!” The solution was to abandon the Y Shaped Hose and use two separate tubes, to create FLOW. This did mean forming a second Spigot to the Rocker Box. Air then flowed IN from the Base of the Air Filter (Post-Filter), and OUT to the Inlet Manifold. A slight adjustment of the Idle and Mixture settings would also be required (Carburettor Engines). From the video (and the Gauze Filter Mesh in the Oil Filler Cap), it looks as though the Skoda uses the Oil Filler Cap for the INLET Crankcase Ventilation. Some Caps are more sophisticated, having a Non-Return Valve to prevent ‘Oily Smells’ venting back to the Engine Compartment. The valve can sometimes ‘Stick Closed!’ I would suggest replacing the tube from the Rocker Box to the Inlet Manifold; as the rubber degrades quite quickly, and will eventually block the tube! There should also be no constrictions or sharp bends in the tube either, as this severely limits the flow of air, and will cause ‘Cold Spots’ where Sludge will form. The Thermostat also appears to be a contributor here too, as the car is not reaching its optimum operating temperature. If it was ‘Stuck Open’ your Heater would not work at all, and there would be low temperature readings almost everywhere (IR Thermometer). You also mentioned that the Radiator Fan does not engage either - Radiator not reaching ‘Trigger Temperature’ for the fan. It is possible that the Thermostat is not closing fully, resulting in low temperatures. Therefore, change the Thermostat, and Flush ALL of the Cooling System. The Cooling System could also be full of ‘Hard Tap Water’ - An indication here will be large amounts of calcified deposits around the Thermostat Housing, when it is taken apart. In some instances (Black Country Water), I have seen Water Pumps seized with ‘Calcates!’ As someone else suggested, it would appear that the Temperature Gauge is a ‘Red Herring,’ in that a VW Sensor was fitted rather than a Skoda. They will have different ‘Temperature Sensing Ranges’ - Hence the ‘Slightly Hot’ indication of the Dashboard Gauge, when the engine is actually running quite cold.

Nice piece of DIY there, good to get things sorted with your own skills. You will know if you take the thermostat housing off if the thermostat valve is not operating correctly, or if as you suspect is slightly open, you can test such things in a saucepan with water in, which you probably know, checking with a thermometer the water temperature and the action of the valve according to it's specifications. The temperature sensor is a relatively cheap item, but the housing may not of been removed for a while which you probably have experience of. The rubber seal on the tailgate needs to be checked for signs of damage, water ingress under the seal where it fits to the metal edge, as water getting under the edge can set up capillary action. This can be checked by removing the lower section of the seal from it's seating position, and checking for signs of water inside the sealing groove, this is a common problem on many modern cars, which I have the pleasure of investigating after spells of wet weather, there are compounds/sealers that you can use in the grove, to stop leaks, we change many of these seals under warranty as modern rubber seems to be prone to breaking down after a relatively short period of time, and most manufacturers seals(that I work on) come with pre-fitted non-drying sealer in the groove. The leak needs to be sorted as the damp will cause mould smells and stains inside the car, which I doubt very much you want in this vehicle you wish to keep for a while. Good luck with all that, nice to see satisfactory progress. Far out man!

12:33 - 'Now it seems you don't go in from the back, you go in from the front.' Less mess anyway 🤣 Very nice to see another video up 😎

I am just dying to see what the paintwork turns out like 😲

Loving the Favourite videos Ian. One thing you can try is see if the rear lights are allowing water in to the boot because of a failed / misplaced seal. I have encountered this before.

@MrAuriga67

5 жыл бұрын

@@TomAlter1000 cellphone typo and sausage fingers........

Great , glad you fixed it 😀

Hi mate if the thermostat is easy to change and it does look fairly easy ,change it the engine will run more efficiently and your mayo in the oil cap will go and your heater will be much more consistent. Love your videos

Braver man than me. I remember trying to fix white dials to a mk1 fiesta I had, me being a bit heavy handed I broke the Speedo needle. No worries I thought, a painted matchstick will do....... errm no. Took ages to get to 70 but once past that we were off past 120 + in no time 🤣🤣

Always love these videos, get much more from these than most of the shite on telly tbh

“Project Skoda” does not do it justice. Maybe “My Favorit project”, or “Super Skoda Challenge” (this was a public domain multi-player Amiga game from my youth)

Nice fresh video 13min new. Fascinating these east European cars. Luckily I avoided a yugo, $3,999 cheap though. Good job on the repair Ian. Rich & kit kats LA California.

Your favorit does make a great companion for the mighty Dacia, they'd look great parked next to each other at a car show so people can compare and contrast them. The one old skool skoda I actually like is the 136 rapid coupe as it is kind of like a mini Porsche.

Good to see work in progress Hubnut. The felt pen on the needle trick looks good, though may not last. I like nail polish for such jobs. Fingers crossed too that the superglue holds. Steel shaft and plastic gear? I'd have hammered or ground some flats into the end of the shaft, scored up the hole in the gear and used epoxy resin. But time may prove that we're both right! Cheers.

@captaccordion

5 жыл бұрын

Ah hah. I've done a bit of pulling apart of speedometers. One problem some cars can develop in Australian heat is curling of plastic speedometer needles which makes them drag along the face and be useless. I've had to remake several from metal, which they should have been made with in the first place.

Well done Ian productive Sunday id say 😉

Had a favourite and a few Skodas with that engine. The engine is bomb proof but it is noisey. Remember is was a rear engine on a car with a front end radiator. Not a quiet car body, but in a bad way faults seldom mattered.

I had the problem with the odometer on my Jetta when it was stuck. I stalled it abruptly one day and it just stopped working. I lost about 800 miles till a mechanic friend sorted it out. I've been talking alot about my old Jetta since you've had the Skoda. Quite similar in some ways. I hope yours doesn't turn into a liability like mine was.