Skil Saw Pro Tips Part 2 + How to Make Perfect Cuts

Original SkilSaw Pro Tips Video • Skil Saw Pro Tips
Enjoy EC? Join Essential Craftsman Academy!
essentialcraftsman.com/academy
This is the best way to support Essential Craftsman and you get a LOT of perks as a bonus.
Check it out.
Did you know we have a podcast?
Spotify spoti.fi/39ezy3d
Apple apple.co/33dbrJQ
Stitcher bit.ly/3NWy8sY
KZread bit.ly/2n4HCLG
Second Channel (Podcast video, family, misc content) bit.ly/2n4HCLG
If you are going to hire a contractor for a big project PLEASE read our ebook first!
amzn.to/2v6qZ6j
T Shirts, Hoodies, and other Merch: bit.ly/2C7JFRv
Instagram / essentialcraftsman
Twitter / ecnatwad
Facebook / essentialcraftsman
Amazon Affiliate Links:
Amazon Store amzn.to/2pcUk8G
Makita 18v Impact amzn.to/2R9uamN
4 ft level amzn.to/389qsQa
Utility Knife amzn.to/2RjVRJL
Palm Nailer amzn.to/2LhvTTd
Spencer Tape amzn.to/2EQWxPy
Carpenter Bags amzn.to/2XeBaC1
Belt bit.ly/3MsdijV
Hammer amzn.to/31y4q66
Tape Measure amzn.to/2WYg23Q
Skil Saw amzn.to/2UcQyLi
Video Equipment and Misc.
Main Camera amzn.to/2WG9qSC
Secondary Camera amzn.to/32tS2Vx
Microphone (for narration from office) amzn.to/2WquPnM
Wireless Microphone amzn.to/2IGpNto
Other Wireless Microphone amzn.to/397VmxJ
Tripod amzn.to/2XOJcOd
GoPro amzn.to/3znHgTA
GoPro Tripod amzn.to/3aL8pFH
Battery Bucket amzn.to/3GVR9cV
ActionPacker amzn.to/2l7Msqv
Learn more about Essential Craftsman
www.essentialcraftsman.com

Пікірлер: 634

  • @sid32ful
    @sid32ful Жыл бұрын

    I am a beginner to woodwork, the main test I have with this bundle kzread.infoUgkxTNB_zFBSnTo_O1PqfVUwgi7ityw0JlKt is that I think that its hard to settle on a choice of the plan and outline to use as there are a large portion of them there. Nonetheless, I like the simple stride to step directions laid out there.

  • @somebody655
    @somebody6558 ай бұрын

    I was a little worried about installing the blade after reading a couple of reviews. But it was amazingly easy. Took about 1 minute. Works great kzread.infoUgkxjpBI8OOeUXib_iT7UomCrQ-uauwZJ62c . Cuts easily and is perfect for pocket cuts I needed to make for replacing some old deck boards.

  • @donalsakran1971
    @donalsakran19712 жыл бұрын

    I’m half way thru my apprenticeship and 5 years in construction. I learn more practical tips from this channel than trade school and work sites combined. Keep this up. You are a true master and an international treasure. God bless you.

  • @landonlandon5533

    @landonlandon5533

    2 жыл бұрын

    Intergalactic.

  • @donalsakran1971

    @donalsakran1971

    2 жыл бұрын

    @@EireFirst2024 thanks a lot I’ll check him out

  • @JustinVodden

    @JustinVodden

    2 жыл бұрын

    Have you seen the videos with Larry Haun? Or his books!

  • @donalsakran1971

    @donalsakran1971

    2 жыл бұрын

    @@JustinVodden yes. Larry was a framing legend, RIP. I have seen his videos and read the Very Efficient Carpenter and highly recommend it. Haven’t read the rest of his books yet.

  • @NoobYuTuber

    @NoobYuTuber

    2 жыл бұрын

    Word broo

  • @paddyboy12432
    @paddyboy12432 Жыл бұрын

    You mentioned Larry Haun... I'm 52. I've seen much. I consider you & him of the same ilk. Cut from the same cloth. Two of the best carpenters/builders/teachers I've ever encountered. I wish I could shake your hand.

  • @livingtowork7297
    @livingtowork72972 жыл бұрын

    This man still rips with an ancient saw. No battery power In sight. Just good ole fashioned knowledge!

  • @nickster0007
    @nickster0007 Жыл бұрын

    As a 52 year old, with skills in everything from electrical, to plumbing, to general construction.... I just can't get enough of your channel. I always find some little extra-tidbit in your videos that I never thought about before. Thanks for sharing!

  • @BillyStanley

    @BillyStanley

    Жыл бұрын

    53, handyman, ditto.

  • @Twinhit
    @Twinhit9 ай бұрын

    Anyone else having fun watching the essential craftsman's videoes, like me?? Good, because I sure appreciate his time and knowledge. Thanks Mr. Craftsman!

  • @christopherpavlicas
    @christopherpavlicas Жыл бұрын

    The "firm wrist" tip is the best skilsaw tip I've ever received. Thank you! It makes all the difference in the world. My cuts have greatly improved as a result of keeping my arm locked as much as possible throughout the cut.

  • @thebrad2138
    @thebrad2138 Жыл бұрын

    You have taught me so much and given me so much career advice. I have grown as a carpenter, a family man, and as a person from your channel. God bless you, Scott, you are truly a mentor and a father to the fatherless. Thank you for your legacy.

  • @celbertbrown
    @celbertbrown2 жыл бұрын

    It's a shame every man didn't have a dad like this! Wish I would've worked with and listened to my grandpa more when he was still here! I absolutely love the EC!

  • @FunkFPV
    @FunkFPV2 жыл бұрын

    Shout out to Nate for all the extra sound editing he had to do on this video 😁

  • @slpeteyAZ
    @slpeteyAZ2 жыл бұрын

    Tricks that came from a lifetime of productivity. And here we are getting them for free.

  • @YankeeinSC1
    @YankeeinSC1 Жыл бұрын

    I have a dad that taught me most if not all of these things. If you weren't so lucky, this guy is a great stand in. As an old guy, I have watched most of his vids as a refresher during projects and still revisit some of them more than once.

  • @peehandshihtzu
    @peehandshihtzu2 жыл бұрын

    In this age of track saws it's a breath of fresh air to see someone cutting freehand in a video. Approved!!! :)

  • @ra4yu
    @ra4yu2 жыл бұрын

    My 2 tips. When using a rip fence, mark the material, cut in about half the blade length then install the rip fence and continue the cut. No dicking around trying to measure from the blade to the fence. When cutting 45 angles, if somebody gives you long to long or short to long and you would rather cut it differently you can change between these dimensions by adding or removing the material thickness to your measurement.

  • @badlandskid
    @badlandskid2 жыл бұрын

    When using the instep method I place the board over my right foot, not my left. (I’m right handed) That puts the path of a potential kickback outside my body. 🤷🏻‍♂️ I try to do this whenever I cut if at all possible. It applies to chainsaws also.

  • @WayneWerner

    @WayneWerner

    2 жыл бұрын

    Angle grinders, too

  • @micahbrandner6647
    @micahbrandner6647 Жыл бұрын

    Loved it as an experienced carpenter of nearly 30 year's I learn something from everyone of your videos this one didn't let me down the sheeting tricks will be practiced I have been cutting out circles with a skilsaw for years and on a few occasions even won some wagers doing so. The 2 sheets 1 cut with a bevel to hide the kerf is going to be my next free lunch ticket thanks for sharing all of the great stuff in all of your videos

  • @RonaldDCass
    @RonaldDCass2 жыл бұрын

    My Dad always used about a two foot "loop" of cord at the position of the saw grip, so if the cord "snagged" on something it could slip & prevent twisting the saw (or belt sander) from kickback or missing the line, or possibly cutting or grinding the cord. He was a cabinet maker for over 75 years & never lost a digit, had a serious cut or broken a bone. He did some risky things, but always left "an out" by visualizing what COULD happen, & expecting to have to compensate. During his many years he also did rough carpentry. His motto was never allow yourself to be in line with the cutting blade if possible, & never EXPECT that a guard will ALWAYS work.

  • @JoshAllenberg

    @JoshAllenberg

    2 жыл бұрын

    The thing about leaving yourself an out, that's the same thing I do. I constantly do sketchy things that will get me instantly banned from sites if osha/wcb show up, but I always make sure to do them in a way that minimizes my risk, while also skipping the bureaucratic safe steps. The way the world's moved away from personal responsibility is sad and wrong. If I die from something I do, its my fault and my fault alone.

  • @robbie6625

    @robbie6625

    2 жыл бұрын

    Just like my gunny always said: "If you're gonna be stupid, be smart about it."

  • @vajoiner_2312
    @vajoiner_23123 ай бұрын

    OK that overlapping two sheets and partially tacking them popping a line and cutting right on the truss Just blew my mind. Yeah, all these tricks are going in my pocket lol thank u sir!!! Your videos are amazing!

  • @abnerbasurto4023

    @abnerbasurto4023

    3 ай бұрын

    Have you tried it yet and did it work?

  • @justtisha
    @justtisha9 ай бұрын

    That roof sheathing trick is awesome!!!!

  • @SlappysAutoRepair
    @SlappysAutoRepair2 жыл бұрын

    I remember back a while ago, you asked what type of content would we like to see. This video reminded me of that question. I think more videos like this would be wonderful. You have a wealth of knowledge. I love hearing your stories and hearing you explain things, like in this video. I have a feeling a lot of people look up to you (as I do) and would love to see more videos like this. You, sir, are a genius!! Keep em coming!

  • @garymclaren7185
    @garymclaren71852 жыл бұрын

    A retired carpenter your videos are great wish 50 years ago they were around . Worked with some rough guys but my Dad was a self made boat builder best teacher ever

  • @carlosgavino6874
    @carlosgavino68742 жыл бұрын

    " I ask for a skilsaw " spoken like a boss thank you for sharing this quality content for us to enjoy and learn from

  • @matwinner9708
    @matwinner97082 жыл бұрын

    The father everybody needs!

  • @Alex-xh1zi
    @Alex-xh1zi2 жыл бұрын

    Some pure gold nuggets of wisdom right there. That 5 degree trick is crafty - going to file that away for sure.

  • @bboypanda7776
    @bboypanda77764 ай бұрын

    I just found your channel and I'm subscribed right after the first video... :) You are like a wise father/grandfather that I never had, with such a delightful style of teaching! Thank you, sir!

  • @tome.joyner887
    @tome.joyner8872 жыл бұрын

    Love you brother. I spent 40 years of my life as a cabinet and furniture maker.

  • @MarkLeonTanner
    @MarkLeonTanner Жыл бұрын

    You are a gem... I've been a stair builder for 25 years... I have the privilege of working on complicated projects for millionaires, and yet I use a skil saw every day, and I continue to learn more about it every day...

  • @SILVERK5
    @SILVERK52 жыл бұрын

    EC convinced me to buy a wormdrive. AvE (see his channel) convinced me to buy the Makita 5377mg (sorry M. Wadsworth... you are so dedicated to Skil) What a change from the sidewinders I was using. I was really worried about the added weight. But the cutting technique is different and the weight works for you, not against. First, you are "behind" a wormdrive while you are "on top of" a sidewinder. That alone makes a huge difference in the ease to make a straight cut. Second, to initialte a cut, you "drop" a wormdrive into the piece using the front edge of the saw table as the "hindge", as opposed to the sidewinder you "push" into the cut. As M. Wadsworth explained, this makes it easier to engage the piece with the right trajectory/blade alignment right from the start. Since a circular saw wants to go straight, this is 75% of the battle won right at the beggining. As a not very skilful DIY, moving from a light sidewinder to a heavy wormdrive improved my accuracy tremendously.

  • @StubProductions

    @StubProductions

    2 жыл бұрын

    I’d take the Skill Saw over the Makita. DeWalts worm drive is king if you can find one. I had a Makita and got rid of it within a day… bought the Dewalt.

  • @splinky99

    @splinky99

    2 жыл бұрын

    He seems to have one in a box at the end of the video!

  • @truckguy6666

    @truckguy6666

    2 жыл бұрын

    The makita worm drive is acceptable. The dewalt one is a horrid design, the skilsaw is and always will be King. the "new" ones are good but if you can find the older style they are IMO better albeit heavier.

  • @tlheingrunst
    @tlheingrunst2 жыл бұрын

    Well done! One tip I've done and was shown early on was to remove the 7 foot cord day one and wire in a 50 footer as to not be hung up by the plug when cutting 8 foot sheet goods or get hung up dragging cord through framing.

  • @Acknaar

    @Acknaar

    2 жыл бұрын

    I’ve started doing it to most of my most commonly used tools was great advice .

  • @RambozoClown

    @RambozoClown

    2 жыл бұрын

    And by looping the cord through the top handle and hooking it over the bevel clamp, it acts as a strain relief and lets you lower your saw to the ground from a roof with no drama or damage.

  • @tlheingrunst

    @tlheingrunst

    2 жыл бұрын

    @@RambozoClown yeppers!

  • @dicktiionary

    @dicktiionary

    2 жыл бұрын

    I believe that was on his first skill saw video iirc

  • @stevenvachon9745

    @stevenvachon9745

    2 жыл бұрын

    I didn't think people used corded skill saws any more. All I see on the jobsites are cordless.

  • @rodpotts2666
    @rodpotts26662 жыл бұрын

    I have been using a skill saw for 35 years and I always get something out of these.

  • @jonbradshaw3385
    @jonbradshaw3385 Жыл бұрын

    This man definitely has the heart of a teacher. Great videos.

  • @natedawg88
    @natedawg882 жыл бұрын

    I do remodeling and any jobs that come along like decks, pergolas, docks etc. by myself or just me and my dog really.. can you make a video on how to stay self-motivated? Sometimes I wake up in the morning and I don't want to go to work and working by myself and for myself sometimes it's tough and I wonder why I'm doing this when my back and feet hurt and the Florida heat gets up there... Sure I'm making money but with being single and no kids I'm just losing site of the goal I guess. Thanks for your videos brother.

  • @offgridhandyman

    @offgridhandyman

    2 жыл бұрын

    Been here bro same deal. You get to a point where money doesn't motivate you anymore. There's a bigger purpose in life then money and things and its a personal journey. You might say spiritual or built around knowledge of why we're here.

  • @craigslitzer4857

    @craigslitzer4857

    2 жыл бұрын

    So, I know this won't be what you're expecting, but maybe examine your diet? I have depression, and eating an extremely low carb diet helps me manage it better than any medication I ever took. It improves my focus, my anxiety, my motivation, and my mood in general. I'm not sure how well it would translate to your situation, but it's perhaps one more lever you could pull to influence things. Worth looking into, IMO.

  • @bob8776

    @bob8776

    2 жыл бұрын

    Sounds like every day of my life buddy

  • @brucelarcombe4679

    @brucelarcombe4679

    2 жыл бұрын

    Get yourself a dog, walk it twice a day. Make that a goal, there’s plenty of things you’ll need to do to achieve it, but it’s a perfect answer to your question. Even if you just walk twice a day and don’t get a dog 😎

  • @natedawg88

    @natedawg88

    2 жыл бұрын

    @@brucelarcombe4679 I have 7 month old Staffordshire Terrier named Zeus. He's my best buddy and always by my side. He has definitely been the best thing for me so you are speaking truth sir.

  • @krenwregget7667
    @krenwregget76672 жыл бұрын

    as a cabinetmaker and furniture builder, I have a lot more hours on the table saw than the skill saw so I learned some neat new tricks. Thanks!

  • @timberray9572
    @timberray95722 жыл бұрын

    I once used a skill saw as a planer, I was working as a shipper for large farm implements and tractors and some items were so large that we could only lift one end with a forklift and then had to skid it into a sea can. One time there was a lip in the sea can floor and I just could not push the item in all the way, I set the blade on the saw so the teeth were only out about an sixteenth of an inch and pushed the saw sideways to plane down that lip in the floor to create a ramp, one of my best MacGyver moments ever.

  • @briancorboy1042

    @briancorboy1042

    2 жыл бұрын

    The crew I worked with years ago referred to that as a "roto plane "

  • @dicktiionary

    @dicktiionary

    2 жыл бұрын

    @@briancorboy1042 Polish Plane in my politically incorrect past

  • @k.d.8924

    @k.d.8924

    2 жыл бұрын

    @@dicktiionary not to be confused with a Finish plane.

  • @BeachBum88m
    @BeachBum88m Жыл бұрын

    Thank you for strongly and repeatedly warning of the dangers associated with these useful tips and shortcuts. Too many folks out there upload content of themselves just showing off, leading young apprentices into life changing situations.

  • @ZamTheWorld
    @ZamTheWorld2 жыл бұрын

    Scott, while all these might help someone who isn’t hip to all these tricks, I’ve never once thought to use my saw as a blower. That is such a good tip! Thank you sir!! Keep up the good work.

  • @codyolmstead4907

    @codyolmstead4907

    2 жыл бұрын

    Even an impact can help blow out screw heads when you're stripping temp construction fasteners. I use the saw blower for years, abd never thought of using a drill until I w a coworker doing it.

  • @Allen-px6io

    @Allen-px6io

    Жыл бұрын

    I saw a number of Old Dogs use that trick. Difference being that nuh nuh those sunsabiches taught a thing. They were tough for a reason. But if you watched closely enough they didn’t hide what they could do. They knew none could do it better

  • @dusty7264
    @dusty7264 Жыл бұрын

    Great video 👍 I bought my first 77 worm drive forty years ago it still works great, I had to quit framing when I was 60 I still do finish carpentry

  • @scottbennington2936
    @scottbennington2936 Жыл бұрын

    National treasure for today's times. safety third. family first. God Bless your home.

  • @garylatture8948
    @garylatture89482 жыл бұрын

    The Skil saw and string videos are my favorites watched several times

  • @Backstorm13
    @Backstorm132 жыл бұрын

    Haven't even started watching the video but I found myself instantly clicking the like button. I hope you and your family is well and healthy! Love from Europe.

  • @Wrightis

    @Wrightis

    2 жыл бұрын

    Same!

  • @brandonleonard9135
    @brandonleonard9135Ай бұрын

    You never cease to amaze. Keep those videos coming sir.

  • @Pippinm7
    @Pippinm7 Жыл бұрын

    This is like the encyclopedia of life here in this channel!

  • @tannerevans3056
    @tannerevans30562 жыл бұрын

    I put a metal roof on our house we’re building in the texas hill country, and i used the trick to put the blade backwards on a circular saw to cut my metal roofing! Worked perfectly.

  • @Baudesign
    @Baudesign2 жыл бұрын

    You are the best instructor out there. Thank you for making Essential Craftsman videos. Keep up the camera rolling. :-)

  • @guysolis5843
    @guysolis5843 Жыл бұрын

    I started my carpentry career by framing houses. I had a lot to learn and I finally bought my first worm drive 30 years ago. Neat tricks that are useful, logical and entertaining to watch. I'm going to get out my old Skil Saw, dust her off and remember the good old days!

  • @jamesbrandon1829

    @jamesbrandon1829

    Жыл бұрын

    Thanks & keep up the good work

  • @lequsejones5384
    @lequsejones53842 жыл бұрын

    Thank you Sir! Worm Drive saws are basically unavailable where I live and frankly, I do more furniture building (I don't build houses). These videos of yours have been welcome and informative and I'm grateful to you for sharing your wealth of knowledge. It is interesting how the knowledge gets applied in different areas of work and how we can take a little idea from here and a little idea from there, put them together and get something that (perhaps) wasn't thought of, so thanks. Greetings from Nigeria.

  • @markprange2430

    @markprange2430

    Жыл бұрын

    Used 7" Skilsaws are in the US on eBay and Facebook Marketplace all the time. Maybe friends in the US could bring some when returning to Nigeria. I buy Skilsaw gear oil online at Etsy.

  • @lequsejones5384

    @lequsejones5384

    Жыл бұрын

    @@markprange2430 Thanks for the heads up but in all honesty, getting hold of a skilsaw is not a priority for me, especially with the voltage difference, it becomes impracical. But beyond that, I have access to the tools I need. Sidewinders are not that dreadful ...Thanks!

  • @radicallyforjesus
    @radicallyforjesus Жыл бұрын

    As a lady who is learning woodworking, (only for hobby and household DIY) I do have to consider the strength factor often. I appreciate your mention of that. I don't have the arm strength of a man and I never will. There is so much wisdom in your videos, but this one is really helpful. I have been a chicken ever since I first experienced kickbacks a couple of years ago. So I tend to clamp down everything and obsess over the safest and best-supported ways to make my cuts. I also clamp long rulers down as saw guides. It absolutely takes me forever to break down plywood. I definitely needed a lot of this video. Even just the locking of the wrist tip is something I really needed to hear. I do always hold the saw like it is gonna jump back on me though. I am still a bit terrified of my little table saw far more than the circ saw. I have at least learned to manage the circ with less fear....I just overmanage I think. I seriously need to do better and lose some of the clamping and fussing I do. I am not doing this as a job, so I don't need to rush but neither do I like my current speed. Last weekend it took me several hours to add shelves in my kitchen. It should have taken a lot less time. I spent so much thinking out every step and cut. I need more time just doing.

  • @Allen-px6io

    @Allen-px6io

    Жыл бұрын

    Buy graph paper, pencils, erasers, and a 12” architects ruler. I bet if you draw out the plans of what is in your head you will have a tangible plan that will serve as an instruction set. Thus making the project more efficient

  • @jeremiah3543
    @jeremiah3543 Жыл бұрын

    Bonus points for referencing the late Great Larry Haun!

  • @richh5392
    @richh53925 ай бұрын

    These are all very satisfying to watch. Its also comforting to know I figured a few of these out on my own. Great minds run in the same ditch as my mom said.

  • @RedN3ctar
    @RedN3ctar2 жыл бұрын

    Thank you for this. I'm an apprentice in construction and I'm trying to get more efficient. Stuff like this really help.

  • @stephenferguson6945

    @stephenferguson6945

    Жыл бұрын

    Buy the Larry Haun book. It makes you money.

  • @hackedi.t3065
    @hackedi.t30653 ай бұрын

    Grear tips Sir. You are clearly very experienced with that saw! Skill saw: for those with skills Everyone else: circular saw 😂 The drop makes so much sense. Thank you very much! I see sqaure too, lol. Didn't know it was a thing. Finally, that gap you covered up with beveled edges and cut in place 👏🏽 hats off to you Sir!

  • @christophereddy4517
    @christophereddy451710 ай бұрын

    I am starting a handyman business that may as my skills grow morph into a contractor job in a few years to a decade and let me say, I am grateful for finding your channel.

  • @sixteentons810
    @sixteentons8102 жыл бұрын

    One thing to keep in mind when ur making those weird pinky finger cuts. Keep in mind the muscles that will be affected and needed to act against that saw if it kicks or binds. Run a few scenarios thru ur mind as ur prepping for the cut. What if it kicks, causes me to loose footing, pulls my arm here or there. Even with a normal cut. I've had it happen and it'd surprise you that simply making this a mental note at the forefront of your thoughts can greatly change your reaction time and lessen or prevent any injury that can happen.

  • @SILVERK5

    @SILVERK5

    2 жыл бұрын

    Soooo true. Especially for 1) newbe like me 2) at the end of the day when fatigued 3) very experienced workers whose mind wanders because so familiar with the tool(s).

  • @Allen-px6io

    @Allen-px6io

    Жыл бұрын

    Well said.

  • @Allen-px6io

    @Allen-px6io

    Жыл бұрын

    The minds of experienced workers do not wander. #1 Some do this because they have to. Others do it because they want to. Those that have to do it are not experienced. They simply put don’t give a shit.

  • @sammylacks4937
    @sammylacks49374 ай бұрын

    I continue to see you do tasks that seem so simple i wonder why I never thought to do such that way. Thats experience and isnt it such a blessing to be capible of learning from you instead of trail and error or the same old difficult or mistake pron way Ive done. Thank you for all you have taught me.

  • @davidflaugher7340
    @davidflaugher73402 жыл бұрын

    Fun to see you cut shims like that! I cut them the same way and I don't remember anyone showing me this method I just came up with it on my own!

  • @janderson8401
    @janderson84012 жыл бұрын

    What you called a botch, a plug or patch that fills a hole, my mentors called a dutchman. Being on the east coast, my only experience with worm drives was with a pair of ancient Porter-Cables that my old boss reserved for cutting masonry. While much of your advice should work for sidewinders as well, I think the dropping into a cut is probably easier with a worm drive. Last and not least, I heartily agree with your reminders that we need to use our own judgement on the risks vs rewards of using these tips on the job. All apprentice tradespersons should have it drilled into their brains that in the end they are responsible for their own safety. I have survived a number of events where in hindsight I could only say “Wow, that was a dumb thing to do!”

  • @orianhullinger7999

    @orianhullinger7999

    2 жыл бұрын

    The Mag-77 is $200 at Lowe's, my local hardware store had an HD-77 for about $180 that i bought. They're just torquier and heavier, and haveing the blade on the left is always a plus.

  • @michaelraney6732

    @michaelraney6732

    2 жыл бұрын

    Yes. Tommy on Ask This Old House called a similar style repair to a wood floor a “Dutchman.” Sounds way fancier than “botch.” Haha.

  • @mwilliamshs

    @mwilliamshs

    2 жыл бұрын

    @@orianhullinger7999 not always

  • @doranosaurus1415

    @doranosaurus1415

    2 жыл бұрын

    Probably same root: Dutchman -> Dutch -> Botch. I'm not a linguist but it's too similar to be coincidence.

  • @darrylrhodes1211
    @darrylrhodes121110 ай бұрын

    I'm from the UK, and I have to say with my 40 plus years of experience ...... The is what is lost with "Health and Security" on site today, In my day you learned how to take care of yourself and your mates working around you. Great video. I went from working with a good team to working alone in later years, you just adapt. Thanks I enjoyed that.

  • @TinManKustoms
    @TinManKustoms2 жыл бұрын

    Been using a skill saw since I was 12 years old. I've ran both worm drives and direct drives. I've also learned from a young age that you should get comfortable with operating tools with both your left and right hand this way when you need to use a saw or a tool in a certain position it'll be a breeze and reduce the risk of an injury. Skill saws can also be used to make dado cuts and be used to as a planer. With the wide range of blades out there it's best to have a couple saws especially if you plan on using it to cut steel and concrete as they wear the shoe down and can possibly mark up wood.

  • @timm439

    @timm439

    Жыл бұрын

    What do you see as the benefit to the worm drive, considering it's so much heavier / unwieldy?

  • @TinManKustoms

    @TinManKustoms

    Жыл бұрын

    Mainly the power behind it will cut thru some of the hardest woods. Plus it gives your arms a good workout

  • @JoeZasada

    @JoeZasada

    Жыл бұрын

    @@timm439 Another pistol shooting analogy... "heavy = steady". Heavier is easier to keep steady. Harder to carry though, harder to hold up if you need to.

  • @burntweeniesandwich64
    @burntweeniesandwich647 ай бұрын

    Thank you for keeping it real. if you pay attention to what you're doing with your SKIL saw all of your tips work and I actually learned some new ones.

  • @jdlives8992
    @jdlives89922 жыл бұрын

    Love these videos. Sure wish we had KZread in the 80’s but I wouldn’t change having my dad and grandpa schoolin me on power tools when I was a kid.

  • @jimdaly5077
    @jimdaly50772 жыл бұрын

    I know why I watch, never to old to learn ( and be entertained) 👍🙃

  • @Burritosarebetterthantacos
    @Burritosarebetterthantacos6 ай бұрын

    Likely my favorite tool.Thanks for the masterclass.

  • @glenkelley6048
    @glenkelley604811 ай бұрын

    I had TWO teachers, one for quality, and one for speed. You have done an excellent job of combining both!

  • @Soleya9
    @Soleya92 жыл бұрын

    Few years ago when I was working on my house, I wanted tips on how to use a circular saw. Ended up finding your pro tips video, and although the tips were far more advanced than what I've needed or used, I ended up loving the channel. Also glad to see the channel is doing well enough to chop up $1000's (joking) in wood for a video.

  • @ronrenz7085
    @ronrenz7085 Жыл бұрын

    I'm almost 72 enjoy doing carpentry I really enjoy watching you and Larry Hann's video's learning things every time your doing and a good thing for people who want to learn the trade

  • @littleshopofsawdust1157
    @littleshopofsawdust11572 жыл бұрын

    These are my favorites. I've gone back and watched the other ones dozens of times. I hope you do 100 more

  • @brianpriest3638
    @brianpriest36382 жыл бұрын

    Thank you again! Due to your channel and the old Larry Haun videos I now own a couple of these saws and use them much more often than all of my other saws (with the exception of my table saw).

  • @standardsman209
    @standardsman20911 сағат бұрын

    Have you ever tried clamping a pair of vice grips to the table of a worm drive skill saw and using it as a rip guide? It’s especially helpful when ripping on a bias angle, like ripping keyway.

  • @william_4297
    @william_4297 Жыл бұрын

    I totally agree with you I have a lot of friends that get picky about whether it’s a skill saw or circular saw and every single time I have to tell them “it’s the same thing” so I appreciate that someone else agrees with me on that

  • @TysonSteele-Matanuki
    @TysonSteele-Matanuki2 жыл бұрын

    Your first set of videos gave me the confidence to purchase and use a circular saw for hobby work. Great to see a follow up!

  • @richardgraham65
    @richardgraham652 жыл бұрын

    Some really useful tips here, I wished I had known that one for cutting the two sheets to make a tight joint a few days ago - It would have saved me some headaches, thanks!

  • @shftn2gear97
    @shftn2gear972 жыл бұрын

    The original video is what brought me to this channel! Glad to see an addition

  • @alfaroalex67
    @alfaroalex672 жыл бұрын

    Favorite part is the blower skilsaw haha. Great video.

  • @jasonald71
    @jasonald712 жыл бұрын

    Great video, I learnt to frame with a skilsaw in California in my 20s. I moved back to the UK in my 30s and had to use sidewinders and then left bladed battery saws (closer to the skil ) your video has just made me realise how much you drop the saw and how much more effective it is as a result. For years I missed my mag 77. The track saw solved some sheet cutting issues but it's not quick to set up. Then I got a 36v makita rear handle and while it's not a worm drive it handles the drop like a skilsaw, it's like working with an old friend. My first fix work is so much easier with it. I still wish I could do the kind of work I did in the States. Keep up your great channel. 👍

  • @scotland2256

    @scotland2256

    Жыл бұрын

    Dewalt do a flexvolt worm drive saw available in the UK, not cheap but I have heard good things and plan on investing in one

  • @jim7smith
    @jim7smith Жыл бұрын

    That final procedure was genius! I know about beveling dry wall patches, but never realized the same technique could be done with the skill saw for plywood.

  • @justtisha
    @justtisha9 ай бұрын

    I saw u cut in the first video and I've been trying to mimic it bc your cuts are so great. I live how you are going into the specifics of the technique.

  • @iaincorbett2420
    @iaincorbett24202 жыл бұрын

    This is my 4th year doing carpentry professionally and I I have never thought of a lot of those tricks, specifically the angled cut around the patch; blew my mind. I am working on building a shop in my basement, and it will feature plywood walls and I hadn't considered how effective I could patch the walls yet. That is an awesome trick

  • @tylerjbellows
    @tylerjbellows2 жыл бұрын

    Who hasn't rushed a cut because they were holding their breath? Safety squints are good most of the time, but glasses and a dust mask can allow you to slow down to make more accurate and safer cuts. A blower that really helps too. Learned that from window installers hogging out the openings with a router.

  • @jford14881
    @jford14881 Жыл бұрын

    This guy is so good I feel stupid watching. But he is such a good teacher he makes me feel like I can be smart. Awesome guy right here

  • @ItreboR63I
    @ItreboR63I2 жыл бұрын

    Thanks Scott and Nate.

  • @michaelandcolinspop
    @michaelandcolinspop2 жыл бұрын

    Of all of those amazing lessons, the one you seemed proudest of was the sawdust blower function of the saw. Brilliant!

  • @_SYDNA_
    @_SYDNA_9 ай бұрын

    Thanks. I've never understood the advantage of the worm drive till seeing this. I'm not as strong as I used to be but I may take this brand new 15 amp side winder back to exchange for the heavier worm drive. We'll see. You're tips and tricks have definitely opened my mind to some new possibilities. I'm not in the trades but I noticed that an added benefit to the way you cut the botch, is that the plug is a wedge. Fastened in from the front side and wedged from the backside, there are situations where that might help to hold the plug in plane without adding a second nailer behind it.

  • @rookiewoodshop
    @rookiewoodshop2 жыл бұрын

    Damn, I’ve missed these tips videos. Thank you Scott.

  • @marissacorvin
    @marissacorvin Жыл бұрын

    I learned how to use a skillsaw with a sidewinder, and living on the east coast I honestly never saw a rear handle or worm drive in my life until around 2020. That's around a decade of using circular saws, but I saw a worm drive and knew I had to have it! These videos are great for helping me switch to a rear handle.

  • @t00_eazy
    @t00_eazy9 ай бұрын

    Massive thanks for sharing years worth of learning in a 30 minute video. Clever tricks, safety, and skillful techniques all explained artfully and expertly. Thanks for the knowledge. Stay well

  • @martinbreuer2442
    @martinbreuer2442Ай бұрын

    I'm pretty sure I heard on 1of your video s that Mr. Swan pssed away. Reason I'm posting something is because am a retired Saw Filer & I learned to gas wield up cracks,build up shoulders anel Retip anyway l learned a lot. But I saw something tonight that i knew but have not been able to retain tel I watched Sy silver solder a knife heilt on. I believe this world needs meny more folks like Mr. Syr Swan & your self. Thank for all your Info.

  • @banjocinema1954
    @banjocinema19543 ай бұрын

    so many great tips and tricks, expressed through experienced knowhow with care and a touch of humor. great video. thanks

  • @wingrider1004
    @wingrider10048 ай бұрын

    So much practical information and teaching...truly amazing. What a craftsman. He should have his own trade school so that he can pass on all of this experience.

  • @tkilg7169
    @tkilg71692 жыл бұрын

    The most helpful video yet.

  • @rubo1964
    @rubo1964 Жыл бұрын

    Sir you are a national treasure!

  • @TheTurpin1234
    @TheTurpin1234 Жыл бұрын

    These seem like such basic, simple things that everybody should know. Yet I did not. Thankyou for your wisdom sir.

  • @virusO1OOOOO1
    @virusO1OOOOO1 Жыл бұрын

    Literally just had the sheathing convo with my wife this morning, its sheeting or sheathing I told her lol.

  • @jeffb4612
    @jeffb46122 жыл бұрын

    I agree with Mike Rowe, safety third.

  • @derweibhai
    @derweibhai2 жыл бұрын

    Amazing technique. Would have never known how to do this otherwise. Thanks!

  • @mcflapper7591
    @mcflapper7591 Жыл бұрын

    So much truth in those words. Techniquality is only about half the job. ;-) Sharing the knowledge makes the world a better place every time. Thank you.

  • @brianoliver3213
    @brianoliver32132 жыл бұрын

    Have learned so much from the Skil saw series and this is a great addition.

  • @scottstoker8613
    @scottstoker86132 жыл бұрын

    Thank you for all of your content , and sharing your priceless wisdom .

  • @camishafi1
    @camishafi1 Жыл бұрын

    Great video as always, you are truly the daddy of them all. You talk so sweetly and intelligently as well and all the time ..thank you very much indeed.

  • @nickpersenaire4443
    @nickpersenaire44432 жыл бұрын

    As always Scott, awesome tips and tricks thanks for sharing and keep up the great work.