Ski doo / Lynx Gen 5 Must Do UPGRADE / TKI CNC Driveshaft Retainer / Install Guide
Тәжірибелік нұсқаулар және стиль
In this one, I install the driveshaft retainer onto the skidoo/lynx snow machine. If you have any questions about this tutorial, please let me know in the comments below. Thank you for watching.
TKI CNC Driveshaft Retainer: tkicnc.com/product/g5-chain-c...
Instructions: tkicnc.com/wp-content/uploads...
As an Amazon Associate I earn from qualifying purchases
Ski-Doo XPS 2 Stroke Synthetic Oil: amzn.to/3YX4qcF
Ski-Doo LinQ Deep Snow Pro Bag: amzn.to/3FBP9XQ
TOOLS I USE!!!
Spring Puller: amzn.to/3Tcq2A9
DeWalt Impact/Drill Combo: amzn.to/3F0m5sF
T-Handle Allen and Torx: amzn.to/3KTHRSF
Socket Set Kit: amzn.to/41Om6d1
Skidoo Accessories!!!
Ski-Doo New OEM Handlebars Guards: amzn.to/3JzzZof
Ski-Doo XPS 2 Stroke Synthetic Oil: amzn.to/3YX4qcF
Snowmobile Tow Straps: amzn.to/3mB3fSr
Snowmobile Dolly Set: amzn.to/3ZZMIpv
Пікірлер: 26
NEED OIL!!! Ski-Doo XPS 2 Stroke Synthetic Oil: amzn.to/3YX4qcF
Excellent video!
Tks for sharing
Verry helpful, just ordered mine from TKI.
@MaxsMotoShop
10 ай бұрын
👍
Great video thank you
@MaxsMotoShop
5 ай бұрын
Glad it was helpful!
excellent job on the video. subscribed.
@MaxsMotoShop
Жыл бұрын
Thanks for the support👍
Nice video. I like that you showed how to do it without removing the lower gear and chain. I know it's not hard to do, though it is time saved.
@MaxsMotoShop
Жыл бұрын
Thanks for watching!👍
Very good video. Thanks bro
@MaxsMotoShop
7 ай бұрын
Welcome 👍
@timohotari5443
7 ай бұрын
1 longer bolt on chain case..where does it go
@MaxsMotoShop
7 ай бұрын
@@timohotari5443 bottom, right hand hole
Very very helpful....is the 24 XRS Turbo R 850.....the same....I have the parts and did not start yet... thank you so very much
@sleddheadxp800r
7 ай бұрын
Coupler is the same part number on the 23 850 as it is on the 24 850 xrs turbo. I’ll be ordering this asap for mine.
@MaxsMotoShop
7 ай бұрын
Glad it helped
Nice work. Where do you get the bulk brake cleaner and sprayer?
@MaxsMotoShop
Жыл бұрын
I get it from worth Canada👍
Hey having a hard time with the loctite. Waited like 1.5 hours and wasn’t cured. Shop is like 40 degrees. Could that have something to do with it
@MaxsMotoShop
6 ай бұрын
The Loctite does not need to fully set up. It only provides a bit of friction as the bolt starts to tighten. Once the bolt titans the insert will provide its own friction to torque the bolt down.
Is that necessary even on the renegade 900 turbo gen 5?
@MaxsMotoShop
10 ай бұрын
Definitely necessary on the summits guys are blowing their chain cases apart
@MrGrobert1
8 ай бұрын
Is it the chain that get broken first?
@Aspired329
7 ай бұрын
I'd suggest watching the mountain sledder garage video on this topic (its just informative) then up to you to decide what you feel is right for you.