If you want to remove all the oil remove both plugs at the bottom of the engine. Then push the throttle all the way in and push the starter button for 8 seconds. The engine won't start and it will empty the passage ways. BRP tech gave me this trick because every oil change the whole oil kit 3.5 qt wouldn't fit I was always over full on the dip stick. I was always left with 0.5 to 0.25 quart of oil to not be over filled.
@hanau7311 ай бұрын
What are the freaking sizes of wrenches needed????? Torx or Allen
@spoonmonkey8971
6 ай бұрын
For my 2021 900ace Trox for drain cover is T27 and oil plug is allen #6. Oil cover is T30.
@upatthefarm6888
6 ай бұрын
@@spoonmonkey8971 Also, if you were misdirected , used a Torx to try to remove the big plug and messed it up, you may be able to hammer in the proper Allen #6. The inside is only messed up at the top.
@ericbloomberg5795 Жыл бұрын
How about rotating clutch to purge residual oil from sump???
@spoonmonkey8971
6 ай бұрын
Just pin the throttle all the way in and push the starter for about 8 seconds it will not start and it will empty the rest of the old oil left.
@gunnessgilbert11994 ай бұрын
The manual states 15 nm not 20. From an official brp video I would expect accuracy. I over torqued my drain plug now as a result. I trusted the information from the manufacturer to be accurate as this is a video to assist in performing your own maintenance. Bro needs to be accountable.
@starlight-05038 ай бұрын
I dont like these new snowmobiles too many screws etc to take off just to put in coolant and so on. Well the ones i watched so far cause i have one that was given to me and idk about it lol
Пікірлер: 9
Great video.
If you want to remove all the oil remove both plugs at the bottom of the engine. Then push the throttle all the way in and push the starter button for 8 seconds. The engine won't start and it will empty the passage ways. BRP tech gave me this trick because every oil change the whole oil kit 3.5 qt wouldn't fit I was always over full on the dip stick. I was always left with 0.5 to 0.25 quart of oil to not be over filled.
What are the freaking sizes of wrenches needed????? Torx or Allen
@spoonmonkey8971
6 ай бұрын
For my 2021 900ace Trox for drain cover is T27 and oil plug is allen #6. Oil cover is T30.
@upatthefarm6888
6 ай бұрын
@@spoonmonkey8971 Also, if you were misdirected , used a Torx to try to remove the big plug and messed it up, you may be able to hammer in the proper Allen #6. The inside is only messed up at the top.
How about rotating clutch to purge residual oil from sump???
@spoonmonkey8971
6 ай бұрын
Just pin the throttle all the way in and push the starter for about 8 seconds it will not start and it will empty the rest of the old oil left.
The manual states 15 nm not 20. From an official brp video I would expect accuracy. I over torqued my drain plug now as a result. I trusted the information from the manufacturer to be accurate as this is a video to assist in performing your own maintenance. Bro needs to be accountable.
I dont like these new snowmobiles too many screws etc to take off just to put in coolant and so on. Well the ones i watched so far cause i have one that was given to me and idk about it lol