I wish I lived closer for me this would be like a kid in a candy store👍
@thiagofigueiredo22
2 күн бұрын
me too
@anterohakasaari2454Күн бұрын
Great job😊😊👍👍
@sandpaper-si2dxКүн бұрын
Generally speaking, a belt too tight will cause a shaft to break where that one broke, and also the lock collars on the bearings should be removed first from the bearing to efficiently remove the bearings, In my experience of a lifetime industrial mechanic and millwright.
@djohn140523 сағат бұрын
Thanks for letting us know what you're cutting.
@thiagofigueiredo222 күн бұрын
Me parecem madeira de primeira linha, muita qualidade! Quem morar por perto comprem! 👍👏
@thepubliceye2 күн бұрын
You would have a lot less trouble if that was a round drive roller. A rubber covered drum would be best but knurled steel should work. That open drive causes a vibration that causes metal fatigue in the shaft and bearings. You could drill 1" holes in the drum with a stagered pattern if trapped sawdust is an issue, but ditch the flat bars.
@johnmcgarvie40612 күн бұрын
You hustled those six logs out the door right smart like.
@robertgreen86952 күн бұрын
Looks like you need a different design on that roller as it looks like there is vibration instability issue.
@Helmsburgsawmill
23 сағат бұрын
Well this one was a replacement to the original, but not done by the original fabricator. The one we changed a couple months ago worked for 37 years🤷 and the break that got it, was really the bearings boogering the shaft
@thepubliceye2 күн бұрын
O like the fixing when needed, everything breaks and one time or another.
Пікірлер: 12
I wish I lived closer for me this would be like a kid in a candy store👍
@thiagofigueiredo22
2 күн бұрын
me too
Great job😊😊👍👍
Generally speaking, a belt too tight will cause a shaft to break where that one broke, and also the lock collars on the bearings should be removed first from the bearing to efficiently remove the bearings, In my experience of a lifetime industrial mechanic and millwright.
Thanks for letting us know what you're cutting.
Me parecem madeira de primeira linha, muita qualidade! Quem morar por perto comprem! 👍👏
You would have a lot less trouble if that was a round drive roller. A rubber covered drum would be best but knurled steel should work. That open drive causes a vibration that causes metal fatigue in the shaft and bearings. You could drill 1" holes in the drum with a stagered pattern if trapped sawdust is an issue, but ditch the flat bars.
You hustled those six logs out the door right smart like.
Looks like you need a different design on that roller as it looks like there is vibration instability issue.
@Helmsburgsawmill
23 сағат бұрын
Well this one was a replacement to the original, but not done by the original fabricator. The one we changed a couple months ago worked for 37 years🤷 and the break that got it, was really the bearings boogering the shaft
O like the fixing when needed, everything breaks and one time or another.
Where are you