SISER ROMEO FOR BEGINNERS | SETUP AND FIRST CUT
SISER ROMEO FOR BEGINNERS | SETUP AND FIRST CUT
Unboxing Romeo Part 1: • UNBOXING SISER ROMEO |...
✅If you are interested in getting a Siser Romeo, my affiliate link is below:
www.heattransferwarehouse.com...
If you are interested in the Crafting is My Therapy File, you can get it here: ✅designbundles.net/plusstore/1...
Hello Everyone, I am ready to dive in to part 2 of Siser Romeo! I am sharing all of the features that I have learned about so far, doing the test cut, installing the Leonardo Design Studio Software, uploading a file, and placing a design on t-shirt. Buckle up because we are doing all of the things!
I am a little scared, because I think I have fallen in love with the Siser Romeo! This machine is so sleek, quiet, fast, and beautiful. I just love everything about it so far. The next thing I plan to try is cutting rhinestone flock, and if it cuts perfectly, I am going to have a hard time balancing my time with my Cricut Explore Air 2 and the Cricut Maker. I am going to do my very best.
Hopefully you will find this tutorial helpful and stay tuned for the next one about how to cut rhinestone flock with the Siser Romeo!
The links below are affiliate links and I will earn a small commission at no additional cost to you.
If you are interested in getting a Siser Romeo, my affiliate link is below:
www.heattransferwarehouse.com...
If you are interested in the Crafting is My Therapy File, you can get it here: designbundles.net/plusstore/1...
✅Shop my Amazon Storefront: www.amazon.com/shop/cricutingw...
✅Shop from Heat Transfer Warehouse: www.heattransferwarehouse.com...
✅Shop from 143vinyl.com: www.143vinyl.com/home.php?par...
✅Shop from Atlanta Vinyl: atlantavinylstore.com/?ref=Az...
✅Get started with an All Access Plan from Creative Fabrica: www.creativefabrica.com/ref/1...
✅Try Design Bundles FREE for 30 days: fontbundles.net/plus-features...
Here is a list of my favorite products that I am absolutely obsessed with:
✅1. Clear Sublimation HTV: amzn.to/3D6OBbO
✅2. Cricut Maker: amzn.to/3TSGsh1
✅3. A-Sub Sublimation Paper: amzn.to/3x1W1t6
✅4. Hiipoo Sublimation Ink - amzn.to/3FIhsn5:
✅5. AIVA Printable Vinyl: amzn.to/3B0Jjfi
⭐Come and get social with me.⭐
Links to all of my socials: linktr.ee/craftingwithdelonda
My Website - craftingwithdelonda.com
Instagram - / craftingwithdelonda
Facebook - / 272801197679910
Pinterest - pin.it/7tLlJrb
Creative Fabrica -craftingwithdelonda.com/creat...
Thanks for watching!
Bye
#siser #romeo #vinylcutter
Пікірлер: 160
I’m enjoying reading all the POSITIVE comments! Everyone is SO HAPPY for you!!! I just had a thought… Watch your numbers fly through the roof!!!❤❤❤
@CraftingwithDelonda
11 ай бұрын
Thank you very much for saying that. I can always count on an encouraging word from you and I really, really appreciate it.
You and Ella Mae are the only ones so far who gave an indepth tutorial...thank you
@CraftingwithDelonda
11 ай бұрын
Thank you ❤️
Let the fun begin. A new crafting adventure.
@CraftingwithDelonda
11 ай бұрын
Yes!!
Delonda, you’re not the only one I did that too, and it scared the entire mess out of me! 😂😂😂
@CraftingwithDelonda
11 ай бұрын
Thank you so much for saying that! I actually thought it was broken and I was embarrassed; but I wanted everyone to know just in case it happened to the.
Ohhhh Lawd! Now I want this one 😢😊❤❤❤❤ I’m loving it already
@CraftingwithDelonda
11 ай бұрын
Aunt Wanda! I would normally tell you not to do it, but I just can't lie...I love it. I'm going to try to still use the Cricut 😭😭😭
I should have watched this before I turned on my machine!! I didn't realize those white plastic pieces needed to come off!! 😬 This video is so helpful!!!!
@CraftingwithDelonda
Ай бұрын
Thank you so much 💓 Listen! Those white things scared the bejezeesus out of me.
Everything has a learning curve. I'm here for it all.🥰💝
@CraftingwithDelonda
11 ай бұрын
Thank you ❤️ I'm ready to dive into this one!
Thank you for the thorough review of the Siser cutting machine!!! It is so beautiful!
@CraftingwithDelonda
11 ай бұрын
You are so welcome! I really love it.
The Juliet can be found in many craft stores 🎉 glad you get to play and show us all about The Romeo ❤ I Love Crafting with Delonda 🫶
@CraftingwithDelonda
11 ай бұрын
Yes! Thank you!
This is so exciting, I am so glad you LOVE IT! ❤️ I love my Juliet and would like to feel more confident using it so I am looking forward to more of your tutorials using Romeo!
@CraftingwithDelonda
10 ай бұрын
I am so sorry for just responding. I am trying to get myself on track and one thing I said I was going to do is respond to every comment I missed. Thank you very much!
That thing is beautiful! I'll put it on my Christmas wishlist. ❤❤❤
@CraftingwithDelonda
11 ай бұрын
That's a great idea!!!
I am so excited for you on your new chapter and I get to learn a brand new machine! 🎉
@CraftingwithDelonda
11 ай бұрын
Yay! Thank you!
Thank you so much!! I'm brand new to the world of vinyl cutting and pressing so I appreciate the opportunity to learn from your examples, and your mistakes!! Excited to keep learning!! This is my retirement hobby!!
@CraftingwithDelonda
10 ай бұрын
Thank you ❤️
Omg! It's a fantastic machine and I will continue to enjoy watching you perfect your skills using it. I'm still intimidated by the explorer machines. 😂❤😂
@CraftingwithDelonda
11 ай бұрын
I heard that! I was intimidated by this one at first but not anymore.
Thanks for sharing your insight. I'm going to look into this machine too. It does have a lot of good features. I can't wait to see more of your videos on Romeo. Have a blessed day.
@CraftingwithDelonda
11 ай бұрын
Thank you so much ❤️
I’m so glad I watched this, I had just got my Romeo and was so glad I wasn’t the only one who didn’t remove the white things as well. I was so scared when I heard the noise also 😂, so thank you I love all of your tutorials and I hope to one day go to walapalooza myself
@CraftingwithDelonda
4 ай бұрын
Thank you ❤️
Love the tutorial. Now I’m gonna buy one!❤
@CraftingwithDelonda
6 ай бұрын
Yay! Thank you!
Delonda you are such a brilliantly talented woman! Teaching us definitely in your DNA! 😂 That’s a huge machine.
@CraftingwithDelonda
11 ай бұрын
Thank you so much 🤗
Thank you so much for that unboxing Delonda. It is exciting! I have not unboxed my new Siser Romeo yet, but I'm trying to get as much knowledge as I can first.
I love you!! You made all the mistakes that I made!! Thanks for the help !! You rock !
That is a beautiful machine.Congratulations.🎉
@CraftingwithDelonda
11 ай бұрын
Thank you ❤️
I love it. The design is beautiful, it is very quick, silent ect. Much to learn and just like you said, we learn togheter. ❤❤ Thank you for tutorial. You can do it 💪🏾🥂
@CraftingwithDelonda
11 ай бұрын
Thank you ❤️
Nim new to cutting machine's I'm learning alot from you, thank you for sharing! I really enjoy the community I get lots of giggles from you gals! Thank you
@CraftingwithDelonda
8 ай бұрын
Thank you ❤️
Great Job! 👏🏽
@CraftingwithDelonda
11 ай бұрын
Thank you ❤️
I finally open the box and tried my Romeo that I purchased in October 2023.🤫 His name is Sir Romey. I love it. He is everything that my other cutter is not. Now, on to making my Sir Romey Journal and watch, take notes and then craft along with all of the Romeo Wednesday videos. I got a lot of catching up to do. 😅 Thank you Delonda for EVERYTHING!!! ❤
@CraftingwithDelonda
6 ай бұрын
Yay! Thank you so much!
Great job 👏 loading from the back is something to get use to
@CraftingwithDelonda
11 ай бұрын
Yes indeed! Thank you very much!
Great video! I love the fact that you showed your bloopers but you always do so that was not a surprise😊. Thanks for showing us how to use it. It makes me want to look into Siser cutters but I don’t really need a new cutter; when has that ever stopped me 😊. Maybe, I will gift one of my Cricut machines to someone; that way, in my mind, I can justify buying a Siser one.
@CraftingwithDelonda
11 ай бұрын
Thanks so much! 😊
@CraftingwithDelonda
11 ай бұрын
I love it so much!!
I love it ❤
@CraftingwithDelonda
11 ай бұрын
Thank you ❤️
Welcome to Team Romeo! Enjoy the journey. The good thing is because it's less than a year old, we're all learning together.
@CraftingwithDelonda
11 ай бұрын
Yes! Thank you!
@DIYTEE10
11 ай бұрын
Anita that is the absolute truth
Thanks for the tutorial
@CraftingwithDelonda
11 ай бұрын
You're very welcome!
Congratulations 🎉🎈🍾🎊
@CraftingwithDelonda
11 ай бұрын
Thank you ❤️
Good morning, I’m sorry I’m 7 hours late ⏰ seeing your part 2 video. That’s one beautiful machine! I was wondering if the Romeo had an available stand. Again, Delonda, CONGRATULATIONS on your retirement after 25 years in your school district. Your story time video was really beautiful. I pray that this new chapter will prove to be all the joy and fulfillment that you are endeavoring it to be. I’m so happy that you are crafting and that you have been crafting for a couple of years now. That should make your transition to retirement much easier. I say this because my husband retired after over 48 years civil service, and has been having a difficult time adjusting to life without his usual routine. This should not happen to you because you have been crafting for a couple years, and you are still teaching, which is what you are gifted to do. Delonda, you do such an amazing job explaining the details of every aspect of what you’re teaching. Yes, it’s your gift from God! He is with you and will continue to guide you in every aspect of your life. I’m so happy that Peter is on board and supporting your decision to retire. You are a beautiful couple. And they two shall be one. I’m truly happy for you. I’m happy for your family. Life has only gotten better for you and your family, and it will continue to grow better and better… with many wonderful surprises and blessings from the Lord. (Romeo turned on smoothly that time). What a beautiful cutting machine! Back to the video now. CONGRATULATIONS!!!
@CraftingwithDelonda
11 ай бұрын
Thank you so much! I'm very excited about this new chapter and the time to craft during the day.
Thank you for the review and not editing out the mistakes. I want one now. 😂
@CraftingwithDelonda
11 ай бұрын
No worries! I am going to show everything because I don't want anyone else to experience the bad stuff if I can help it.
@nahnisjourney1406
11 ай бұрын
@@CraftingwithDelonda YOU’RE WONDERFUL!
@CraftingwithDelonda
11 ай бұрын
Thank you ❤️
@lynnebizlyne436
11 ай бұрын
@@CraftingwithDelonda You are so thoughtful ❤ I love your videos. I have been debating possibly on the Romeo or Juliet so your tutorials will definitely help me on my decision ❤❤
Good video thanks congratulations looks good
@CraftingwithDelonda
11 ай бұрын
Thank you ❤️
Wow how amazing I am so excited but if I get one it will be the smaller one possibly I have to decide to save my coins for this big boy thank you for being honest and kind ❤
@CraftingwithDelonda
10 ай бұрын
Thank you for tuning in.
I'm learning right along with you. I would like to try a life size outdoor character on it.
Something I liked about the machine watching this video is, the fact the tool holder it’s not counted as part of the machine’s cutting space. The whole tool holder part looks around 2 inches and hidden almost perfectly on the side. It seems like you can cut the whole 26 inches. That’s is a really good cutting side. ❤
@CraftingwithDelonda
10 ай бұрын
I am so sorry for just responding. I am trying to get myself on track and one thing I said I was going to do is respond to every comment I missed. I am really loving this machine so far. I just need to learn more about how to use the software.
That be a big boy....! I knew it was big but your view really shows the size. Looking forward to learning with you. I don't have a machine but did download the software a week or so ago. Tracey
@CraftingwithDelonda
11 ай бұрын
Tracy, I love it already. I can't lie.
@TYJ419
11 ай бұрын
@@CraftingwithDelonda This January I got the Solo StarCraft . The cutting set-up is about the same but I don’t care for their software. So, I mainly use it to cut rhinestone templates. Kicking myself now because I could have gotten the Juliet but because it was so new and I didn’t know what features their software would have chose the other machine. I really….like what they’re doing with the Leonardo software though! Prior to the Solo, was mainly a Silhouette user for years and dabbled with Cricut some. Tracey
@CraftingwithDelonda
11 ай бұрын
Understandable
OMG. I want one. 😀
@CraftingwithDelonda
11 ай бұрын
It's so good!!!!
Team Romeo!!! Welcome to the club Delonda!!
@CraftingwithDelonda
11 ай бұрын
Listen! I was not ready to fall in love with this.
@becomingdryork2919
11 ай бұрын
The love is instant, too late lol. @@CraftingwithDelonda
Great video. It’s big but sleek. Maybe someday it will be in my future 😅😊
@CraftingwithDelonda
11 ай бұрын
Fingers crossed!
@Replay, love the demo.
@CraftingwithDelonda
11 ай бұрын
Thank you ❤️
Team Romeo❤
@CraftingwithDelonda
11 ай бұрын
My lord! I'm going to have to join your team 😭😭😭
So happy for you. If I ever get another cutting machine thinking it will have to be either Juliet or Romeo. Can’t wait to hear your opinions on Leonardo Design Software.
@CraftingwithDelonda
11 ай бұрын
Yes! Thank you! Kristen, I have been looking at Patrick's tutorials (since he has not called me) and I love the freedom that comes with this machine.
@KristenCenci
11 ай бұрын
@@CraftingwithDelonda Patrick needs to help you. During Wallapalloza I saw a live where they helped someone set up their Romeo.
Ok I sold I'm about to put the grandkids on a cash diet until Christmas so I can get this machine.... 😂
@CraftingwithDelonda
11 ай бұрын
I cannot stop saying how much I love it!
I have the Juliet and it cuts rhinestone flock perfectly every time.
@CraftingwithDelonda
11 ай бұрын
I'm ready to try it!!
@MakingwithMarilyn
11 ай бұрын
Mary Brown, so good to know. Do you cut with the backing on? I've been seriously considering purchasing the Juliet.
@marybrown1131
11 ай бұрын
@@MakingwithMarilyn I cut with the backing on, with no mat. I set the force at 55, speed 10. Each machine may require a little different setting, use the test cut feature until you find what works best. I only use the mat when I use scraps for small items.
Love that you included the mishaps. We're learning together. I'm looking at this and the new Venture. I like this because there's no need for mats, but I need to know if it has the feature for viewing your design on t- shirts, bags etc. before making it? I love that on the Cricut. I don't want to lose it. Other than that it looks like a solid machine. Thanks Delonda.
@CraftingwithDelonda
11 ай бұрын
Yes! I love that feature too! I'm so ready to learn more about it ❤️ I definitely need that t-shirt template 😭😭😭
@poppyshoessp
11 ай бұрын
@@CraftingwithDelonda Agreed!
Hey Delonda, I love your creative flow, your real personality, and your teaching techniques. Everyone can't teach !!! What and where can I get that electric shelf that you have your Romeo on? I am a beginner, but interested in the larger machine to make banners. signs and BD props. Thanks for all that you pour out.
@CraftingwithDelonda
3 ай бұрын
Thank you so much! This is the table I have: amzn.to/44dgZEA
I am so excited for you! This is awesome. Is the main difference between the Romeo and the Juliet the cutting size? I assume they both cut flock? They both seem to cut much faster than the Cricut Maker for sure. 😊
@CraftingwithDelonda
11 ай бұрын
Thank you so much! Yes, the only difference is the size. I am going to test cut some flock today.
Hi, did you have any more videos on the dtf machines this month?
@CraftingwithDelonda
11 ай бұрын
This month no. But I will definitely work on that.
The test cut seems like it would be great to cut the pieces of puff when you trying to figure out the temps pn them..
@CraftingwithDelonda
11 ай бұрын
Yes!
What make you decide to get siser romeo instead of silhouette cameo? I am thinking of getting a wider format cutter. I have maker 3, not happy with the cut size even they improved
Omg this is awesome. Prob not in my price range tho 😂😂😂
@CraftingwithDelonda
11 ай бұрын
I wish I didn't love it as much as I do. I understand about the price though!
I am considering to switch I hope it not too expensive.
@CraftingwithDelonda
11 ай бұрын
It is worth it, in my opinion.
wow
@CraftingwithDelonda
11 ай бұрын
Right! It's fast, quiet, and beautiful 😍
What type of vinyl did you use? The color is popping.
@CraftingwithDelonda
2 ай бұрын
I don't remember 🤣 It should be listed below the video.
Tip you don’t have to lift the rollers every time. Use the arrows on the screen.
@CraftingwithDelonda
11 ай бұрын
Thank you ❤️
@CraftingwithDelonda
11 ай бұрын
Give me all the tips!!!!
You can the USB port to charge a phone or tablet
@CraftingwithDelonda
11 ай бұрын
OMG 😊
Delonda, I would love to see print then cut
@CraftingwithDelonda
11 ай бұрын
I am going to try to do it by the end of the week.
Try print and cut next. I’d like to see how it works.
@CraftingwithDelonda
11 ай бұрын
Noted!
How do u put serial number in
I’m so happy that you have the Romeo. I completed my first project last night with my Romeo. It was a success. Rhinestones and Siser easy color DTV. Super ambitious project form my assistant, and she loved it. FYI please do not use the HTV RONT rhinestone flock. It’s the absolute worst. I tried the TRW Magic flock and it’s incredible. It works just like it’s supposed to. Thank you for another great video!
@CraftingwithDelonda
11 ай бұрын
Oh wow! Thanks for letting me know. I thought everyone was saying the new one from HTVRONT was good???
You gonna need a bigger craft room! 😉
@CraftingwithDelonda
11 ай бұрын
Facts!!
🤗👍🏼❤️
@CraftingwithDelonda
11 ай бұрын
❤❤❤
Print and cut should be the next project
@CraftingwithDelonda
11 ай бұрын
I'm going to try it very soon. Probably this week.
It would be helpful if the vid were segmented into chapters or have timestamps in the description.
It looks awesome but looks complicated to use
@CraftingwithDelonda
11 ай бұрын
I am still learning...I am going to share everything I know.
Camera is for print to cut. You can push arrows to remove the vinyl too! Either way works. You can adjust those pinch rollers as needed. 😅
@CraftingwithDelonda
11 ай бұрын
I'm in love.
@clevesque6348
11 ай бұрын
@@CraftingwithDelondaI knew you would! Love the auto weed box and test cut.
@clevesque6348
11 ай бұрын
@@CraftingwithDelondaI’m still watching. 😅 I always line mine up at front of machine and line to left. Yay you got it second time. And moved the pinch rollers too!
@clevesque6348
11 ай бұрын
@@CraftingwithDelondaimagine making stickers with it? 😂 Sooo fast! Your cricut is gonna be mad!!Wireless works great. It isn’t bluetooth. You set it up on wifi. I have no issues. 😁
@CraftingwithDelonda
11 ай бұрын
OMG! I'm sad and happy at the same time.
🫶
@CraftingwithDelonda
11 ай бұрын
❤️❤️
Delonda you may need a bigger room!!!
@CraftingwithDelonda
11 ай бұрын
My husband may need a "he-shed" in the backyard.
Nope, I dont need 1 of these..😂😂
@CraftingwithDelonda
11 ай бұрын
Keep saying it!
@lakeishahale32
11 ай бұрын
😂😂
not to sound rude but im getting tired of all these people posting about really expensive crap that most people cant afford
@CraftingwithDelonda
11 ай бұрын
Oh that doesn't sound rude at all. If this isn't for you, you can always keep scrolling.
Yea, was making me nervous you didn’t take out those white shipping pieces. 🫣I couldn’t tell you though. 😨
@CraftingwithDelonda
11 ай бұрын
You should have screamed it through the computer, lol!