No GoPro? Hey, but at least you're back on KZread. One of the oldest subscriptions in my list... ;)
@antongirdeux074 жыл бұрын
Rick dude you've changed so much since the Farm. I'm sure back then you were stressed out as heck but you always have kept a good attitude. Today, I can see you are truly happy now. You're a tough son of a gun man, I respect you so much.
@kirkhathaway49745 жыл бұрын
glad to see you so happy! Thanks for these new vids!!!!
@Bjarne.5 жыл бұрын
You are a wonderful guy, who has amazing abilities and who is going to have a great trip. Want a very good trip and a good sleep in the wonderful bed. But you have to get a pretty big discount from the carpenter you got help from. Have a nice trip. Bjarne
@moeshickenyay5 жыл бұрын
Looks great, too bad about the woodwork that sucks, but your interior looks great and comfortable. Will help me with my Sirius 21, and how it I want it to look inside, Thanks good video, keep em coming, take a bunch of videos. Im up in Honey Harbour Ontario, still cleaning up the boat inside and out, mast is up, engine is running. If you could go over how you hooked up the electrical to your fuse box, mine is completely identical, that would really be great. I scuba too, so show some footage getting and off, even with the ladder that will be a task with a tank, respirator, mask and flippers. Thanks again, have fun on your trip and great video.
@ammoalamo64854 жыл бұрын
I see that disappointing wood work, and know the feeling. I moved to a county of 35 thousand and discovered I knew more than darn near every tradesman I hired. I had plumbers run a roto-router into the house instead of into the yard, electricians (2) who couldn't figure out which breaker to turn off to change a light, carpenters who couldn't router a straight line, and tree service who left me with stumps. But it's all good, I found one contractor, finally, who turned me on to the good guys in town, so maybe the next project will go well. Your table - you deserve a re-make. The others, you can fix with a router or a table saw. Thanks for the video, just wondering if it's gonna sail or just motor, cause masts and sails are expensive.
@photocontrol5 жыл бұрын
Have a fun voyage Rick!
@georgiannmaloney65945 жыл бұрын
Looks nice. Have fun.
@MarionBlair5 жыл бұрын
Your boat is awesome. Can't wait!
@user-vj4ih9pp9z5 жыл бұрын
It still looks pretty good.
@bracketracing5 жыл бұрын
Awesome job man!
@vettafaene5 жыл бұрын
Looking good!
@tashawilliams87745 жыл бұрын
Rick you rock David he is a naughty boy
@hughjarse4627
5 жыл бұрын
David rock likes them
@tom.p19865 жыл бұрын
have a good trip
@SuperGrandPrix995 жыл бұрын
if you would of lived in that southern Minnesota my grandpa is an artiste when it comes to work he could have made you the exact dimensions sanded it even painted it for you and honestly he would have done it for free because that is just the type of gentleman my grandpa is he is retired and he has a workshop and he loves going in it every single day I hope you didn't pay too much for that stuff Rick best of luck. cheers
@jefftreseder43585 жыл бұрын
WILSON! Buy yourself a Wilson to keep you company if you hit an iceberg in the Bermuda Triangle.
@ramtuff20075 жыл бұрын
awesome boat shweet cheers mate
@tashawilliams87745 жыл бұрын
Boat looks good
@donnieporter78905 жыл бұрын
Rick dam thats a huge battery in the vac is it 20v.. i live n kansas and i haven't seen the 20v sander u used and u said u have a compressor thats 20v can u show us and say what they coat thanks rick great to see u taken the boat out cant wait
@blooddimond4725 жыл бұрын
Rick ive been watching ya since i was 11 and im 22 now.. boy have i seen some messed up things 🤣🤣
@donnieporter78905 жыл бұрын
Rick take a router and router a notch in the button and the piece will sit down n the hole he did a shitty job but router the bottom will b easier than finding a planer thank rick boat looks real good
@MyOldSled4 жыл бұрын
That boat was made 40 minutes away from me.
@jmurray015 жыл бұрын
I'd leave him a bad review and a half Rick, that's shoddy work. I don't know much about wood work but someone who calls himself a "professional" should be doing a better job than that!
@smitty01595 жыл бұрын
No doubt Rickem damn guy didn't know shit when it came to the wood work, awesome little boat man looks like a lot of fun.
@Reel--Life5 жыл бұрын
Have that wood run thru a thickness planer. It will only cost a couple bucks.
@jobos985 жыл бұрын
Be careful. Dont drift away from your boat when diving. Its not a good thing. 👍
@picassoenzo5 жыл бұрын
Where you work Rick?
@daw1624 жыл бұрын
Pith in the center of boards is unstable and doesn't belong in anything other than something where vertical strength is needed (as in, posts on decking) and stability isn't. It doesn't look like oak to me, it looks like pine.
@MultiCocobeware5 жыл бұрын
In your previous video you said you wanted the boards re done thicker
@johnzwicker2045 жыл бұрын
Have fun on the sea
@moeshickenyay
5 жыл бұрын
John Zwicker Lake Erie.
@suzyrottencrotch5132
5 жыл бұрын
moeshickenyay 😂
@euro18595 жыл бұрын
funny looking oak !
@daw162
4 жыл бұрын
looks like pine. Pith in the center makes it look like it was picked out of the fence post section of the store.
@Paul-ou1rx4 жыл бұрын
I prefer the 35ds.
@BuckyBeWildLexus5 жыл бұрын
you gonna get your boat permit or just go illegal as frig?
@herrasaastoliekki45445 жыл бұрын
wood is now dry. not so bit deal to fix this cutter.
@ramtuff20075 жыл бұрын
get a small fridge to put in there
@Jimmymac17765 жыл бұрын
Bro I cant wait to see your trip but here's what gonna happen your going to sink to the bottom of lake erie lol
@moeshickenyay
5 жыл бұрын
Nahh, my Sirius 21 rocks in huge swells, and is really stable in anykind of weather with the Keel down, great boat love mine.Just wish I could get mine looking as clean and comfortable as yours, just takes a lot of work and elbow grease.
@shaunhansen33485 жыл бұрын
Reverse the orientation of the grains
@robertbandle3785 жыл бұрын
that would make me mad to if you buld a tabe thay should put the grain the same
@alanmacneil2155 жыл бұрын
That sucks hope you didn't pay much shitty work. Good luck on the trip
@mmmcquoid5 жыл бұрын
try not to use extention on solar you'll loss to much current at 12volt
@mmmcquoid5 жыл бұрын
suppose to be cup up cup down so they compensate each other looks more like pine than oak because he used tiny trees poor wood selection for a damp environment
@DynamoDylan5 жыл бұрын
Lol 50ft on hookah make sure to film that.
@robinj3575 жыл бұрын
Damn Rick you're overthinking it! It's not a $10,000 teak table. Quit looking at it so closely and use the damn thing lol
Пікірлер: 55
Buy a smoke alarm if you're gonna sleep in there
No GoPro? Hey, but at least you're back on KZread. One of the oldest subscriptions in my list... ;)
Rick dude you've changed so much since the Farm. I'm sure back then you were stressed out as heck but you always have kept a good attitude. Today, I can see you are truly happy now. You're a tough son of a gun man, I respect you so much.
glad to see you so happy! Thanks for these new vids!!!!
You are a wonderful guy, who has amazing abilities and who is going to have a great trip. Want a very good trip and a good sleep in the wonderful bed. But you have to get a pretty big discount from the carpenter you got help from. Have a nice trip. Bjarne
Looks great, too bad about the woodwork that sucks, but your interior looks great and comfortable. Will help me with my Sirius 21, and how it I want it to look inside, Thanks good video, keep em coming, take a bunch of videos. Im up in Honey Harbour Ontario, still cleaning up the boat inside and out, mast is up, engine is running. If you could go over how you hooked up the electrical to your fuse box, mine is completely identical, that would really be great. I scuba too, so show some footage getting and off, even with the ladder that will be a task with a tank, respirator, mask and flippers. Thanks again, have fun on your trip and great video.
I see that disappointing wood work, and know the feeling. I moved to a county of 35 thousand and discovered I knew more than darn near every tradesman I hired. I had plumbers run a roto-router into the house instead of into the yard, electricians (2) who couldn't figure out which breaker to turn off to change a light, carpenters who couldn't router a straight line, and tree service who left me with stumps. But it's all good, I found one contractor, finally, who turned me on to the good guys in town, so maybe the next project will go well. Your table - you deserve a re-make. The others, you can fix with a router or a table saw. Thanks for the video, just wondering if it's gonna sail or just motor, cause masts and sails are expensive.
Have a fun voyage Rick!
Looks nice. Have fun.
Your boat is awesome. Can't wait!
It still looks pretty good.
Awesome job man!
Looking good!
Rick you rock David he is a naughty boy
@hughjarse4627
5 жыл бұрын
David rock likes them
have a good trip
if you would of lived in that southern Minnesota my grandpa is an artiste when it comes to work he could have made you the exact dimensions sanded it even painted it for you and honestly he would have done it for free because that is just the type of gentleman my grandpa is he is retired and he has a workshop and he loves going in it every single day I hope you didn't pay too much for that stuff Rick best of luck. cheers
WILSON! Buy yourself a Wilson to keep you company if you hit an iceberg in the Bermuda Triangle.
awesome boat shweet cheers mate
Boat looks good
Rick dam thats a huge battery in the vac is it 20v.. i live n kansas and i haven't seen the 20v sander u used and u said u have a compressor thats 20v can u show us and say what they coat thanks rick great to see u taken the boat out cant wait
Rick ive been watching ya since i was 11 and im 22 now.. boy have i seen some messed up things 🤣🤣
Rick take a router and router a notch in the button and the piece will sit down n the hole he did a shitty job but router the bottom will b easier than finding a planer thank rick boat looks real good
That boat was made 40 minutes away from me.
I'd leave him a bad review and a half Rick, that's shoddy work. I don't know much about wood work but someone who calls himself a "professional" should be doing a better job than that!
No doubt Rickem damn guy didn't know shit when it came to the wood work, awesome little boat man looks like a lot of fun.
Have that wood run thru a thickness planer. It will only cost a couple bucks.
Be careful. Dont drift away from your boat when diving. Its not a good thing. 👍
Where you work Rick?
Pith in the center of boards is unstable and doesn't belong in anything other than something where vertical strength is needed (as in, posts on decking) and stability isn't. It doesn't look like oak to me, it looks like pine.
In your previous video you said you wanted the boards re done thicker
Have fun on the sea
@moeshickenyay
5 жыл бұрын
John Zwicker Lake Erie.
@suzyrottencrotch5132
5 жыл бұрын
moeshickenyay 😂
funny looking oak !
@daw162
4 жыл бұрын
looks like pine. Pith in the center makes it look like it was picked out of the fence post section of the store.
I prefer the 35ds.
you gonna get your boat permit or just go illegal as frig?
wood is now dry. not so bit deal to fix this cutter.
get a small fridge to put in there
Bro I cant wait to see your trip but here's what gonna happen your going to sink to the bottom of lake erie lol
@moeshickenyay
5 жыл бұрын
Nahh, my Sirius 21 rocks in huge swells, and is really stable in anykind of weather with the Keel down, great boat love mine.Just wish I could get mine looking as clean and comfortable as yours, just takes a lot of work and elbow grease.
Reverse the orientation of the grains
that would make me mad to if you buld a tabe thay should put the grain the same
That sucks hope you didn't pay much shitty work. Good luck on the trip
try not to use extention on solar you'll loss to much current at 12volt
suppose to be cup up cup down so they compensate each other looks more like pine than oak because he used tiny trees poor wood selection for a damp environment
Lol 50ft on hookah make sure to film that.
Damn Rick you're overthinking it! It's not a $10,000 teak table. Quit looking at it so closely and use the damn thing lol