You can credit who you want but My dad was a commercial fisherman running a 65' boat with my mother as crew. He then got his capt. license and ran tugs for years. I watched him do this for years. Many times we would come to a dock to drop off or pick up some thing and a stern quarter line was all that was used, along with the boat in gear

@respecttherisk2022

11 ай бұрын

Wow. That is really cool. Thank you for sharing that anecdote. A few folks have said the same thing regarding tugs or commercial boats. It's great to hear that. I first read about the tactic in one of Bernard Moitessier's books where he described its usefulness. I had never heard of it before that. Thanks for the note!

@carrileee2249

10 ай бұрын

Fishers know and use lots of skills & knowledge for which they haven't been credited! I love it when I hear: "I learned this from a fisher."

Nicely shown. We do it this way, too, with minor variations, even when not singlehanding. And when landing, that's the first line to go on, helping to stop the boat and using the engine to keep it in position while the others go on. Thanks for posting.

@respecttherisk2022

10 ай бұрын

Good stuff! Thank you for sharing that.

I’m a deck hand on sea going tugs . We have been using two part lines for centuries. Mooring , casting off, generally resisting a strong current at a pier. I am constantly surprised by sailors who have never heard of 2,3 and more part lines.

@respecttherisk2022

11 ай бұрын

That is very interesting. Yes, it is fascinating that sometimes commercial boat tactics take a long time to translate into recreational boating. Do you have any other suggestions? We would all love to hear your thoughts. All the best! Thank you.

@skylarker9

10 ай бұрын

Been doing stuff like this for years in schooners, small boats, and now in my regular career on tugs and ATB’s. Works great. It’s a method as old as you can imagine for sure. It’s not that it’s taken time to trickle down from commercial to your boat but just that we can’t all know all the things at the same time. Which is where KZread and magazines and books come into great effect at disseminating knowledge. You’ve done that here to help spread knowledge to those who would have otherwise missed out on it. So thank you. I’m a professional mariner and I still watch these videos because I never know what I might learn.

@dulls8475

2 ай бұрын

All the posts are about people who know about it....

Met Bernard Many years ago he had come in to Sausalito California Anchored out and gave a talk at the library. And as you know he did not like coming into harbors and tying up to docks if he could help it. Blessings to you and yours

@respecttherisk2022

10 ай бұрын

Wow. That is really awesome! I wish I had a chance to meet Mr. Moitessier in person. He remains one of my favorite authors and singlehanders and has inspired me over many years. Thank you for sharing that with all of us! On a total aside, I was berthed in Sausalito over a winter in 2012 while I was making my way south singlehanded from Victoria to Cabo San Lucas in a Contessa 26.

What a simple, ELEGANT strategy!!! Many Thanks.

@respecttherisk2022

11 ай бұрын

You are welcome! Glad you liked it.

@tarekabdel-hamid2226

11 ай бұрын

@@respecttherisk2022 quick followup question: would you also advise to turn rudder to port… to pin stern to dock?

@respecttherisk2022

11 ай бұрын

@@tarekabdel-hamid2226 You can do it either way. Play around with the rudder to watch for how it impacts the angle of the boat at the dock. I have starboard prop-walk -- so I typically put the rudder to starboard to move the stern as far away from the dock as I can. Then, when I untie, and begin reversing out of the slip, my prop-walk straightens the boat out. Once the boat is moving slowly in reverse, I put the boat in neutral to get the rest of the way out. So the rudder angle can become a tactic to pin the stern to the dock or move it away. Good luck and happy docking! :)

Nice. I do much the same but I first turn the stern line into a slip line so there is no need for a line on the winch. Also in this case I would put the wheel hard over to starboard and lock it. This helps keep the boat held on to the dock.

@respecttherisk2022

10 ай бұрын

That sounds like a great approach. I must try that. Thank you!

In reverse order, this is the way I flawlessly land on the dock.

@respecttherisk2022

Жыл бұрын

Awesome. Thank you for sharing that.

@PineappleOranges

11 ай бұрын

This is basically how we did it on towboats up and down the Mississippi River. They got their own words, but they would call them towing and backing lines. One of those doubled up was really all you needed for tying up. Then you can take your time getting the rest.

@briangilliland3620

11 ай бұрын

Me too except my line is from centre cleat and back around winch, the loop dropped around dock horn cleat as we ease in. Then other dock lines seized according to wind direction

Nice job and good clear explanation. We love Poet's Cove, it was great seeing it in the background. :)

@respecttherisk2022

Ай бұрын

Glad you enjoyed it! Thank you. I love Poet's Cove as well and also love being at anchor in the harbor and hiking in the park. One of my favorite places :)

That works good. If that was me, I would have the helm turned to the starboard side to keep the bow pushing the wharf instead of more throttle. That would help with stronger wind issues. Cheers

@respecttherisk2022

10 ай бұрын

Excellent suggestion. Thanks for the note. I continue to learn from other boaters with comments here -- thank you!

@blackmax222

10 ай бұрын

@@respecttherisk2022 we are all connected 🙏 thanks for posting your video

I've been doing this on my Sparrow 16 trailer-sailer for many years. It is super handy because I'm using an old outboard that only has forward and no neutral. For me, I retie the stern-line by having it wrap around the cleat or bull-rail and bring it back to my mooring cleat. Then with the motor on and turned to push the bow in a bit, I can undo the rest of my mooring lines at my convenience. Then I get in the boat and when ready, undo the stern mooring line and go. My outboard is one that can be turned 360 degrees so that if I need to back out, I can do that easily too.

@respecttherisk2022

10 ай бұрын

Thank you for sharing that detail. That sounds like a great and flexible approach.

@idaho_girl

10 ай бұрын

@@respecttherisk2022 You are very welcome. Like most innovations/inventions it came out of necessity! 🙂

Thanks for your prompt reply. Yes I use these techniques especially when there is a strong wind blowing me on the dock and I'm single handed in vessels over 50 ft long. The helms are obviously hydraulic which is a big help in holding position. Keep safe in your travels

@respecttherisk2022

10 ай бұрын

Thanks for sharing that. Wow. I have never singlehanded on boat larger than mine at 38 feet. Very impressive! You too -- all the best!

Thank you! Very well demonstrated and very informative.

@respecttherisk2022

9 ай бұрын

Glad it was helpful!

Great tips for all solo sailors

@respecttherisk2022

10 ай бұрын

Glad it was helpful! Thank you.

Thanks for the video, I did this for 2 years when I had to get off the dock single handed in San Francisco. This work well until we have a strong (>10kt) crosswind breeze, which is about every summer afternoon in SF :)

@respecttherisk2022

Ай бұрын

Right on. Yeah, a strong cross breeze would be tough tough tough! How did you manage it? We would all love to hear your thoughts. Thank you.

@jackchen5290

Ай бұрын

@@respecttherisk2022 I turned the wheel towards the breeze to get some prop wash to help get the bow to the wind. It’s still quite tricky as I shift to reverse the wind still wants to quickly catch the bow, Usually I watch the marina water for ripple so I can anticipate the gust, and go when I see a lull. If the breeze is more than 10 knots, I will still need crew to help walk me out.

Very good demo and info... thanks

@respecttherisk2022

11 ай бұрын

Thanks for watching!

That was excellent. Thanks. I’m going to try that soon in my Cal 22.

@respecttherisk2022

10 ай бұрын

Right on. Good luck! Thanks for the note.

Line In the prop always happens when you don't want it to: Yeah, 100% of the time is the time you don't want it to.

@respecttherisk2022

10 ай бұрын

True That! I should have said, "at the worst possible moments!" :)

@timhohmann7545

4 ай бұрын

When would you want it to?

Gold. I am a beginner. Perfect. Thank you Sir.

@respecttherisk2022

11 ай бұрын

Thank you for the comment. Good luck with your journey on this. I am still refining my techniques as well.

@miketexas4549

11 ай бұрын

An old timer gave me the best advice when I first started and was having trouble leaving solo in my Cal 34 - "reverse her like you stole her!" I immediately mastered it after that.

Tks for sharing ! Pretty interesting.

@respecttherisk2022

10 ай бұрын

Glad you enjoyed it. Thanks for watching.

Your are only 9 subscribers away from being monitized ...so I subscribed for you.... 👍

@respecttherisk2022

11 ай бұрын

Hey Thanks! Thanks for the support to get to that milestone!

Well done sir.

@respecttherisk2022

10 ай бұрын

Thank you!

That was great, Gonna have to try that!

@respecttherisk2022

Жыл бұрын

Thank you! It is definitely an amalgamation of learnings both from experience and from suggestions from other boaters and viewers. Give it a go!

Nice job!! I also use the thief's hitch which is very similar...

@respecttherisk2022

11 ай бұрын

Thank you. Interesting -- I have not heard of the "thief's hitch." I will have to look that up. Thank you for sharing. I have learned quite a bit from other boater's comments.

@Chris-fo8wp

10 ай бұрын

@@respecttherisk2022 It works well on docks that have cleats... I single hand a lot of boat deliveries, sometimes you have to get creative!!

Well done.

@respecttherisk2022

Жыл бұрын

Thank you!

I will often use this for short stops. Just get a stern line on, leave idling ahead and the boat will sit there while you sort things out … only on one occasion for someone to come and tell me the boat was still in gear 😂

@respecttherisk2022

10 ай бұрын

Right on. Thank you for sharing that. I have also been "scolded" for stepping off the boat with it in gear also.... Happy sailing and docking!

Love this!!! I have a long bow sprit platform on my 38’ ketch rig.. when I leave the dock there is always wind coming off my Starboard Bow which of course makes her drift to Port.. I often ask a passerby to grab a Starboard bow line to keep me straight until I get safely backed out… your video will help me solve this problem… Thanks for sharing and I just subscribed to your channel..

@respecttherisk2022

11 ай бұрын

Glad you liked it. It does help. Sometimes the current and wind grab the bow and even this tactic is not quite enough. The other day, I had to push the boat out of the slip by hand about 2/3 of the way, angle it to port about 30 degrees, climb aboard and back out the rest of the way with prop-walk pulling me back to starboard. I am still learning and perfecting my techniques!

@ketchingmy2ndwindonsvchops459

11 ай бұрын

@@respecttherisk2022 Good idea!! I have thought about doing that too.. Well it’s all part of the adventure as they say!! I have come to realize that arriving at and leaving the dock sometimes causes problems for seasoned experts too…. 😎⛵️🥢🏴‍☠️🤙

Good video, thanks

@respecttherisk2022

4 ай бұрын

Glad you liked it!

I was very interested to see another method of leaving dock solo as I sail solo. However I prefer my own method. As you said, getting off the boat with the engine running just makes my scalp itch. I take all lines off bar one, the midship line. It's tied to the midships cleat, goes to the dock cleat and takes only one turn around it, then back to winch. I can use the engine if I want to point the boat, then I simply undo the line from the winch and as I reverse, the lines comes off the dock cleat and I can quickly pull it on board.

@respecttherisk2022

10 ай бұрын

That sounds like a very elegant approach. Thank you for sharing that -- I will give it a try!

This also works good coming in, and. If you just need to snub up hard against ths dock while loading stuff or passengers

@respecttherisk2022

10 ай бұрын

Thank you. Yes, I have used it that way as well.

Cheers from San Juan Islands

@respecttherisk2022

3 ай бұрын

Cheers mate. I am not too far from you in the Gulf Islands! I had True North at Anacortes Cap Sante Marina for many years. All the best.

Great video...and what looks like a technique that I will use moving forward.

@respecttherisk2022

2 ай бұрын

Glad it was helpful!

Very cool. Ill be trying that..

@respecttherisk2022

6 ай бұрын

Thanks for the comment. I have had good luck with it in many situations.

Nice...always good to learn a technique. I use a version of this to spring out of my dock. I have an Alberg 35, more or less full keel, and the fairway in my marina is only a little wider than the boat length. Fortunately, the turn is to port, same as my prop walk. But if the wind is over the stern I need help getting the boat to come around and that's when the same stern tie, gradually let out until the bow clears the dock, works for me.

@respecttherisk2022

11 ай бұрын

Thanks for sharing that. My permanent birth has the same challenge, except I need to bring the stern to port if I want to go out bow first -- and my prop walk is to starboard. When I add in wind and current, it can be quite challenging. I have learned a lot from the suggestions of viewers. Thanks for the note.

@rainerbuege1615

10 ай бұрын

@@respecttherisk2022 use a two Part spring one the Port transom and turn around that spring.

@rainerbuege1615

10 ай бұрын

@@respecttherisk2022 use a two Part spring one the Port transom and turn around that spring.

As a Frenchman who was a sailor and a teenager in the 60's I read extensively Moitessier and I must say I never heard of the expression "Moitessier tie". This method along with many others depending on wind, current and space was very well explained in the various booklets from PBO, or Practical Boat Owner published in the late 80's to the mid 90's. PBO nor Moitessier invented this tie : it's been in use since ever and it's been one of the subtleties of mooring and casting off to use it properly with all its variant as many parameters come in the picture (including the pitch propeller). As a matter of fact, although I fully understand the educational purpose of this video, I must say the "Moitessier tie" seems quite useless in conditions shown on video : weather is calm, apparently no current, very light wind … why not cast off all lines and just back off ??? the more so the area is quite empty. As for casting off the lines from the pontoon, this is quite surprising. It's been done by many amateurish crews these days and it certainly is not the way to do so. Crew remain in control of the boat when onboard! The more so when singlehanded. Mooring line are simply passed through the cleats without being tied so it's a matter of slipping lines. Simple and very efficient. Having sailed singlehandedly a lot during my time I thrive for simple, common sense, nobrainer methods : the ones that work with the boat I sail. Then again the conditions are so easy in this video tant either way work well… As for leaving lines dangling on the guardrails it's a "don't even think of it" for me, coil them and they will un coil very easily. Then again each one does as he likes. Live and let live !!!… Cheers ! … PS Moitessier is certainly a man to read when sailing singlehanded.

@respecttherisk2022

11 ай бұрын

Thanks for the many thoughtful and considered points.There is a lot there for all of us. It sounds like we share an affinity for Mr. Moitessier's books. I have read them all multiple times and always learn something new after every read! That is interesting re the PBO reference -- good to know. I called the "Moitessier Tie" as that was where I first heard of it. My sailing courses had never covered it! Totally agree: Simple, common sense is always best! All the best. Cheers.

It probably “happens when you don’t want it to happen” because there is no time you want it to happen.

@respecttherisk2022

10 ай бұрын

haha, yeah for sure. I should have said, "it happens at the worst possible time!' I wrapped the prop one time in 30 knots or so of wind... in the marina... it was a bit of an epic to get the boat back into the slip!

All very calm and in control which is what we like. For me, taking off the spring lines and stowing them is no.1, converting the stern line to a highwayman's hitch or similar so that I can stand aboard and release the knot from the safety of the vessel using the working end is no.2. And then removing the bow line is no.3. No.4 is removing the tension on the stern line and leaving the dock. On a slack tide I'd store all my lines including the bow line whilst moored by the stern line leaving only the stern line to store once I was off the dock. On a rising/falling tide I'd improvise dependant upon wind etc...But that is just me, and I don't even own a goddam boat and never have. How weird is that. HA!

@respecttherisk2022

10 ай бұрын

Thank you for sharing that. I like those ideas. I had not heard of the "highwayman's hitch" so I had to go look it up! (And I am a bit of a "knot-guy" as a lifetime rock climber and sailor!) That looks like an elegant approach. Thank you for sharing that! All the best!

I use this method to single-hand as well. I use a modified version when backing out of the slip when the wind and prop walk are pushing the bow towards the dock: I pull in on the line while backing and use it to hold the stern towards the dock and the bow away. cheers...

@respecttherisk2022

5 ай бұрын

That's a good idea. Thank you for sharing that. All the best mate.

I double up the bow & stern lines then remove the springs, start the motor remove the bow line then the stern line & drive away.

@respecttherisk2022

11 ай бұрын

Thank you for sharing that. Sounds like a good approach.

I have seen it first done by a fisherman in Denmark and used it ever since. Super easy, but i am sure it was not invented by Moitessier.

@respecttherisk2022

10 ай бұрын

Right on. Thanks for sharing that. I call it the "Moitessier Stern Tie" only because that was where I read about it first -- in one of his books published in the 60's. I suspect he picked it up from someone else along the way.

@rainerbuege1615

10 ай бұрын

The thing ist, good seamanship evolved over centuries by experience, but in Modern Times much of it is forgotten. So i applaud you for making this excellent video. Thank you for keeping tradition and knowledge alive.

😅I've been doing similar with say a starboard bow spring to a dock cleat midships with rudder to full port but your method seem like less fuss. Also, your way one is right at the cockpit & controls. Good one!

@respecttherisk2022

11 ай бұрын

Thanks for the note. Yes, I agree, the technique has many good features. I have been refining my techniques for varying conditions and continue to learn. I have received many good tips in comments on this channel which is pretty cool actually. Best wishes!

I just use a spring line from amidships with the rudder out from the dock and the engine in idle forward.

@respecttherisk2022

10 ай бұрын

Thank you for sharing that. I will give that a try.

In UK usually have three cleats on each pontoon so only works if pontoon is longer than your boat and last pontoon cleat is behind your deck stern cleat/winch. My pontoon as many finishes well short of stern and all pontoon cleats are forward of corresponding deck cleats. I tried it running a spring forward to centre cleat with a traditional shaped boat the tapers significantly it doesn't hold it the same way.

@respecttherisk2022

11 ай бұрын

That is an interesting challenge that we don't see here much. Usually the docks are as long or longer than the boats. I wonder if you had a tie forward, and put the boat in reverse, adjusting the tie point until it sits where you want it? Just a thought. I will try that when I am on the boat next.

@respecttherisk2022

11 ай бұрын

One more thought I had for you -- if the engine is engaged in reverse, I would anticipate that prop-walk to starboard or port will impact where the tie goes. I am keen to try this myself to see how the boat responds. Best wishes!

Im thinking of getting a trolling motor to pull in and out. After further thought i have to do it with lines. The wind and the tide can beat that. Backing out with winds off aft port tide coming from aft the wind pushes bow and im 180 degrees from where i want to be.

@respecttherisk2022

11 ай бұрын

That is a really interesting idea.

this was worthwhile. I note you did not have to turn the wheel to starboard, kind of appears like you would have to if there was a stronger wind blowing from the starboard beam...wouldn't the bow want to drift off dock more? i'm gonna practice this maneuver. ty

@respecttherisk2022

10 ай бұрын

Thanks for the note. Yes, if the wind or current was on the starboard beam, you would add starboard helm and/or throttle. Best wishes on this. I found playing around with the helm valuable to learn the sensitivity to the angle of the boat at the dock.

All these videos show floating docks at the side of boats, which are easy. Nobody ever shows videos of how to single-handedly tie up to and leave a piling/post berth that only has a fixed dock at bow or stern.

@respecttherisk2022

10 ай бұрын

That's good point. Thanks for bringing that up -- it would be a good video to make for sure. I have been to maybe 30 marinas the Pacific coast of Canada, USA and Mexico and have never seen a situation like that -- but I agree, it would be a challenge for sure! Do you have any suggestions on how to do that singlehanded?

Great method! I would be quite tempted to just use the self trailer on my winch to hold the line, thoughts on that?

@respecttherisk2022

11 ай бұрын

That's a good idea. Just make sure it is "bomb-proof" so to speak, and there is no danger of someone or you upsetting the tail by kicking it or upsetting it in any way -- it would be regrettable to have it come undone and thus run your boat into the dock while it was in forward gear. That said, I like the idea that it can be undone under load easily.

This is the ONLY way to leave the dock in an unfavorable wind! Here in the States, we’re lucky because we have cleats instead of rails. That makes this much easier. You simply take a short line with a spliced loop in the end, slip it over ONE horn of the cleat, and tie the other end to a cleat on the boat. Now, you simply back out of the slip and the dock line falls off the cleat without any effort on your part. The line falls in the water, but it’s too short to reach the rudder or prop. Both hands are free for the wheel and engine controls. Once safely clear of the dock, you can pull it in by hand, or use a docking pole, or even pull it in with another dock line bowlined to it.

@respecttherisk2022

Жыл бұрын

Oh wow! That is a great idea. I will keep that in mind for when I am at a marina with cleats. An excellent suggestion! Thank you! I agree, it is always a struggle with an unfavorable wind -- especially singlehanded -- so easy to lose the bow against a neighboring boat! Thanks for tip!

@Thfeyhvfdetyhbvcd

Жыл бұрын

@@respecttherisk2022 Just be careful that the eye splice doesn’t slip over BOTH cleat horns; then you’re not going anywhere! The smaller the eye, the better! Been there; done that! Sure glad there were no witnesses!

@brianmock551

10 ай бұрын

Nice!

good stuff. what would you do for scenarios where you have wind abeam starboard?

@respecttherisk2022

10 ай бұрын

Thank you. If the wind was abeam to starboard, you would notice the bow coming off the dock to port. You could add some throttle, and turn the wheel to starboard to help keep the bow on the dock (while stern line is still attached). I have starboard prop walk, so one of my challenges if the wind is abeam to starboard, is losing the bow to port as I start to motor out -- both from the wind abeam, and my starboard propwalk. I can counter this using the stern-tie by moving the stern away from the dock with wheel to make a 20 or 30 degree angle, bow on the dock, and then reverse out -- which helps but doesn't always work. (I can lose the bow to port and it can foul on the boat next to me if the wind is stronger.) In these instances, I have done a bit of a "cheat" tactic, where I walk the boat about halfway out of the slip with the motor in neutral, let the wind catch the stern and blow it to port slightly, climb aboard, and motor out. If the wind is too strong abeam to starboard, I would ask for help guiding the bow out from someone on the dock. Longwinded answer, but these can be challenging conditions singlehanded!

@nathanbenton2051

10 ай бұрын

@@respecttherisk2022 interesting. thanks a lot for the info! very helpful😃

Beginner Canadian sailer here.. Why do they call it a Spring Line? Thx.

@respecttherisk2022

10 ай бұрын

There are typically four dock lines -- the bow and stern line, both of which end up roughly perpendicular to the dock when tied off: these are meant to keep the boat close to the dock, perhaps 6 or 12 inches. The other two are the "Spring Lines." They are to prevent the boat from moving forward or to stern in the slip. I am not 100% sure on the origin, but in my own mind, they prevent the boat from "springing" forward or to stern in the slip because of wind or current. In practice, they are perhaps 10 to 15 feet long so as to be almost parallel to the dock -- more rope out allows more stretching movement of the line, thus reducing the forces on the boat. Happy sailing and docking!

To put a boat in gear, with no one on board, is just too much of a risk for me. There is no way to stop the boat if things go wrong. Here is my way to undock single handed. I prep one center slip line, that runs from my cockpit to the middle of my boat, to the dock and same way back into the cockpit. So both ends are in the cockpit (or your winch). With the fenders in front and back of the center line, the boat is firmly secured to the dock for the moment, with no option go to back or forwad (even with shifting wind, or tide). After this line is set, I can untie all docking lines. For departure, I have all the controls in my cockpit - undue the centerline and bring it in, shift into gear and take her out. So at the end, it is just the same procedure as your method. Give it a try as an alternative method. Always a hand's breadth of water under the keel and greetings from Germany

@respecttherisk2022

4 ай бұрын

That sounds like a very elegant approach. Thank you for sharing that. I will give that a try!

'It always happens when you don't want it to'. I think that would be always, no?

@respecttherisk2022

10 ай бұрын

Haha, yes, that is correct -- I should have said, "it always happens at the worst possible time..." I once wrapped the prop with a dock line trying to leave my birth in gusts up to 30 knots -- I lost control of the boat, and had to get two people on the dock help me wrestle the boat back upwind into the slip. It was terrible! And totally a mistake I made letting a dockline fall into the water.

Hi there. Good video. I'm new here. Is this Horseshoe Bay?

@respecttherisk2022

2 ай бұрын

Thanks. It's Poet's Cove Resort in the Gulf Islands.

No. A sheet winch is a sheet winch, not a mooring bollard. Go and check your winches manual so see the maximum design load and I assure you you run the risk of exceeding it by tethering a yacht to it.

@respecttherisk2022

10 ай бұрын

That's a good point. Thanks for sharing that. I will check that. Anecdotally, I figured with the engine idling in these cases, the boat would be at 2 or 3 knots through the water. I have exceeded hull speed with jib only -- before reefing -- I suspect the forces were greater on the winch in those conditions. It does "feel" that way on the line and the sheet, but again, this is just anecdotal. Thanks for the note. It's a great comment and certainly one that we all should consider.

@tobylane4935

5 ай бұрын

Honestly mate, there is nothing wrong with your video and the guy mentioning not using the winch to inch forward on is being a bit of a fairy. Perfectly good 'working' single handed method... a hardened sailor can also use that same line with the hitches removed and a fender on the aft quarter to go astern and it will help bring the nose out if you were being blow onto the pontoon. you'd need the space mind... or be on hammer head etc... nice one

@markbailey6051

4 ай бұрын

YES, stay in bed under the covers and you will be ok.

Hi is true north a Canadian Contessa 32 or is she a 38? great video. can testify to not being brave enough with throttle to make this work.... mine spins round like a bloody ballerina as soon as the wind takes the bow

@respecttherisk2022

Ай бұрын

True North is a 1984 Contessa 38. "Big Sister" of the Contessa 32 -- all the same ratios, just stretched up to 38 feet. Manufactured in Britain to Lloyds of London Spec, brought over on a ship to North America, and trucked across America to the Seattle area where I bought her in 2016. Here is a brief intro video I made of the boat: kzread.info/dash/bejne/ooB4p8WHYJfFhsY.html This does work well for me. I also used this technique on my Contessa 26. I have tried other methods though I do seem to come back to this one if there is any breeze or current. I have starboard prop-walk so I do like to "pre-set" the boat with stern to port before I engage in reverse. I also use lots of fenders! I also started using my boat hook a bit more for fine-tuning from the cockpit. I will also often walk the boat a third of the way out of the slip with the engine idling in neutral as well -- then step aboard the stopped or very slowly moving boat to take over with some throttle. All the best mate.

Smart

@respecttherisk2022

10 ай бұрын

Thank you!

Does this work on port side too?

@respecttherisk2022

4 ай бұрын

Yes, it will work on the port side as well when the engine is in Forward.

😊

@respecttherisk2022

11 ай бұрын

Thank you! :)

you can achieve the same thing with a midship snatch block.

@respecttherisk2022

10 ай бұрын

Thank you for sharing that. A few boaters have suggested that. I am going to give it a try!

Any difference in procedure port-to dock as opposed to starboard-to dock?

@Thfeyhvfdetyhbvcd

Жыл бұрын

Due to prop walk, one side would result in pulling your stern toward the dock, while the other side would push it away from the dock. In anticipation of this, while still in forward gear, You would want to turn the wheel so that your stern was against the dock or away from the dock. Then, once in reverse, the prop wash would work to your favor in straightening the boat.

@respecttherisk2022

Жыл бұрын

Yes -- great answer Thfe. I agree. My boat has starboard prop-walk -- and depending on the slip geometry I can adjust the wheel to either have the stern against the dock, or away from the dock in preparation for the exit. In this case, I had a lot of room behind the boat, and the wind pushed me almost straight back right away. I only learned that tactic recently with help from my boat neighbors and viewers.

@Thfeyhvfdetyhbvcd

Жыл бұрын

@@respecttherisk2022 BTW. My strange channel name??? Years ago, I had a video clip I wanted to text someone, but it was too long to send. It would fit on KZread, so I simply created a quick and dirty account to share it. I never intended to use it again, so just slammed the keys to create my channel name! Now I’m stuck with it.

@torstenhansen4308

11 ай бұрын

Nicely done video; I liked the pace and your narration which both underscore how drama free this method can make undocking. I just subscribed and am looking forward to many more shorts on how to handle a sailboat under power 😉.

@respecttherisk2022

11 ай бұрын

@@torstenhansen4308 Thank you!

noice

@respecttherisk2022

Жыл бұрын

Thank you!

Is that a contessa 42?

@respecttherisk2022

11 ай бұрын

Good eye. It's a 1984 Contessa 38. Basically a stretched Contessa 32 with all the same ratios and design, just longer. This one was manufactured in Britain to Lloyds of London Spec and then brought over to North America. You can see a short introduction to the boat on one of my videos here: studio.kzread.infopLDEcN04_Vc/edit

@sailingblacklotus

11 ай бұрын

@@respecttherisk2022 very cool I wonder if it is gonna be similar to the rustler 42

The boat should never leave the dock with any crew left on the dock. This is the solution.

@respecttherisk2022

10 ай бұрын

Thanks for the note. Absolutely agree!

Bloody hell you dont even need to tie off Lol. Try doing it 15 knots off wind on the bow and another boat next to you.

@respecttherisk2022

6 ай бұрын

Breeze was light that day for sure -- just enough to grab the bow without the tie off. 15 knots would require quite a bit more throttle to hold the boat in place for sure.

I’m curious as to why you take the dock lines with you ? I cast my lines to the dock from the boat then use a boat hook to snag them when I come back in

@respecttherisk2022

11 ай бұрын

That's a great idea. I should definitely explore that concept some more at my regular marina berth. In this particular video, I am not at my regular berth but visiting Poet's Cove on Pender Island in the Gulf Islands in British Columbia -- I was not going to come back to this slip. When I am singlehanded, I leave the dock lines "elephant eared" over the lifelines leaving and approaching the dock -- it makes it easy for people to help from the dock as I come in, or, if I mess up myself, it is easier to grab from the dock. If conditions look too tricky with wind and/or current for me to come in alone, I have radioed in to have someone on the dock to give me a hand -- once I get close enough, they can grab the "elephant ear" and help control the bow. Happy sailing!

This looks good except that the yacht is in ahead. I thinks I prefer the Duncan Wells bow bridle where the boat is in astern and set up to leave to dock. kzread.info/dash/bejne/l32o0Nqlo5WXeJM.html

@respecttherisk2022

11 ай бұрын

That is a great video. Thank you for sharing that. That approach would work well if the dock finger was shorter than the boat. One viewer had mentioned that. I am going to add this to my repertoire! Thank you!

@DaveandGinny972

11 ай бұрын

@@respecttherisk2022 I've just watched lots of your single handed docking and un-docking videos. You seem very lucky and look to have very benign conditions in your marina. I need to deal with wind and tide usually over here on the east coast of the UK. On the Duncan Well's bow bridle, I find that if I have some extra line on the running end, I can ease it out slowly so the boat starts to exit the berth whilst the occasional tug on the line will still keep the bow in check. It's a technique I really like, especially when wind and tide are pushing me away from the finger. I'd highly recommend Duncan's 'Stress Free Sailing' book. Fair wind and tide to you, David.

the old girl could use some bright work

@respecttherisk2022

11 ай бұрын

True that! I took a belt sander to it the last time I was on the boat. I am returning it to the plain teak without bright work -- but yeah, I had the same thought when I watched this video -- so I took the sander out. :)

show me this 'technique' when there's even a slight breeze 🙄🙄

@respecttherisk2022

10 ай бұрын

Absolutely. That's a follow-up video I have to make still! Great suggestion -- Thank you!

Your method is misnamed! This was in use by Dutch sailors long before Bernard was even born!

@respecttherisk2022

10 ай бұрын

Thanks for the note. That is very interesting.

Why didn’t you use the helm as well instead of an increase in throttle

@respecttherisk2022

10 ай бұрын

Great question. I could have used the helm, but my wheel lock doesn't work anymore, so I would have had to tie off the wheel. The water from the thrust straightens the rudder out when left unattended. Very good question!