LOVE THIS. Excellent craftsmanship. Can you PLEASE share you design plans?
@motohead117
3 ай бұрын
No plans I just go into the shop and build it,it’s all trial and error
@armadilllo10 ай бұрын
61 bucks?👍🏼 I'll give you $100 right now! That's cool!
@motohead117
3 ай бұрын
🤣🤣🤣👍👍👍
@JPaulDenny3 жыл бұрын
Great video, I was thinking about buying a Sherpax trailer, but now I want to make my own! Thanks
@motohead117
3 жыл бұрын
I lightened up by 35lbs by using a CR85 front wheel and a smaller box. I saved over 5lbs jus by switching boxes The new wheel saved 20lbs and the tire saved 5lbs
@motohead117
3 ай бұрын
Do it,it will be a blast
@7.62shawn54 жыл бұрын
That trailer is awesome! Would love to build one for my bashon brozz 250. I cant believe how cheap it was for you to build it. Hope you make some vids of you traveling and camping with it. Thanks for sharing your project 😁
@motohead117
2 жыл бұрын
I’m going to be towing behind my Tao Tao TBR7 !!!.
@josephwinkler48634 жыл бұрын
Great job price is right also really can’t beat it you only be towing it to and from
@deffy7503 жыл бұрын
Very nice set up👍. Make another video of how too✌️
@cubgsan2 жыл бұрын
Good morning !! It is a great trailer video ! So nice idea for loading much more ! Have a nice day!
@Shepherdservices3174 ай бұрын
I need one built for my dog lol
@KIPMoto2 жыл бұрын
nice work man looks good!
@MrHons773 жыл бұрын
It's nice I'm jealous
@mcg56175 ай бұрын
Very nice Excelente
@toddricketts94982 жыл бұрын
Nice setup 👍
@r.i.p24644 ай бұрын
Hows the emergency braking when fully loaded. Awesome build.
@motohead117
3 ай бұрын
It tracked perfect under hard braking
@MOTOMINING Жыл бұрын
I'm wondering if tongue weight rules don't apply to axle mounted mono trailers.
@ramblingprose66034 ай бұрын
Viewer wondering: how do you rego that? Will those attachment points survive? Anyway: not even putting lights on it
@motohead117
3 ай бұрын
No lights needed because the motorcycle lights are visible. No reg needed as it’s considered a part of the motorcycle
@jdleestirringthepot64214 жыл бұрын
you need to change the ridged hitch setup, to a universal joint type or ball for better handling , it will handle better on freeway speed and wind and in the curves , ive been pulling every type of trailer you can think of for 45yr from big trucks to rv trailers to small trailers and all my motorcycle trailer
@motohead117
4 жыл бұрын
It needs a semi ridged hitch or it just falls over,this works good it’s a tried hitch setup that I’ve used before. The problem is light bike vs heavy trailer
@mrsietz3 жыл бұрын
Seems to be a great set up but missed the wheel type due to wind noise. What was the wheel brand?
@motohead117
3 жыл бұрын
In the video it had a GS500 front wheel. But it proved to be too heavy so the big box came off and a smaller box went on. Also the GS wheel came off and a CR85 front wheel went on. I shaved off over 35lbs !!.
@mrsietz
3 жыл бұрын
@@motohead117 Thank you...you have been a big help
@slrs3908 Жыл бұрын
Sure is a nice looking rig you have there, but with the front of the trailer having no suspension, the trailer is always going to have a very harsh ride. Suspend the front of the trailer from the bike frame.
@ffejkk372 жыл бұрын
Any advice for those with solid axels? I was considering a trailer setup similar to a bicycle trailer. I don't want to build a complex hitch that mounts to the frame. I ride a f650gs Your design looks perfect and ide like to copy it
@stephenandloriyoung5716
2 жыл бұрын
I made a simple arrangement to connect a trailer to my motorized bike - a rigid draw bar fastened to both sides of the bike frame, with a single vertical hole in the center behind the wheel, to pull the trailer. On the tongue of the trailer I welded a threaded end of a car inner tie rod end, and threaded an outer tie rod end onto it. The pin of the outer tie rod end goes down through the hole in the bike draw bar. This allows for steering , tipping of the trailer sideways in relation to the bike, (the tie rod can rotate on its thread) and plenty of fore-and-aft vertical travel. Tightening the tie rod end stud nut makes both bike and trailer hard to steal.
@stevesjourney70002 жыл бұрын
I realize this video is a bit older. I'm having a situation living off my bike that this would be the perfect solution. Do you still have this or do you sell them? I know I could build one if I had a place but I'm on the road full time.
@motohead117
3 ай бұрын
Don’t have it anymore but it would be perfect for someone living off there bike
@juntjoonunya92163 жыл бұрын
Do you got a vid with plans for this? I'd love to make one similar myself
@nickstoykov2 жыл бұрын
nice trailer but the turning radius of the trailer is too small on a tight turn you can fall of the bike the distance between the bolt and the front of the trailer has to be longer
@motohead117
2 жыл бұрын
🤣🤣🤣🤣🤣🤣🤣 Nothing wrong with this trailer at all !! It works flawlessly,what makes you such a expert ???🤣🤣🤣🤣🤣🤣🤣
@ShivankhBose4 жыл бұрын
Please can you share the plans
@motohead117
4 жыл бұрын
No plans,I just went in to the shop and started building
@richardworden97472 жыл бұрын
Sorry it's so windy I didn't hear about your rim and tire . How tall is it and where can I pick up one please.
@motohead117
2 жыл бұрын
It’s a Suzuki GS500 front wheel ( 17”)
@richardworden9747
2 жыл бұрын
@@motohead117 thanks much
@joshtran8543 жыл бұрын
Where can I get one ?
@motohead117
3 жыл бұрын
I built it myself,get a welder and start building !!👍👍👍👍👍
@joshtran854
3 жыл бұрын
Can you got me link for parts
@motohead117
3 жыл бұрын
@@joshtran854 eBay for a XT250/350 swing arm eBay for motorcycle shocks Metal retailer for tube steel
@rolandoperez805411 ай бұрын
Need to add a fender on it to avoid water splash on you and your gears
Пікірлер: 48
LOVE THIS. Excellent craftsmanship. Can you PLEASE share you design plans?
@motohead117
3 ай бұрын
No plans I just go into the shop and build it,it’s all trial and error
61 bucks?👍🏼 I'll give you $100 right now! That's cool!
@motohead117
3 ай бұрын
🤣🤣🤣👍👍👍
Great video, I was thinking about buying a Sherpax trailer, but now I want to make my own! Thanks
@motohead117
3 жыл бұрын
I lightened up by 35lbs by using a CR85 front wheel and a smaller box. I saved over 5lbs jus by switching boxes The new wheel saved 20lbs and the tire saved 5lbs
@motohead117
3 ай бұрын
Do it,it will be a blast
That trailer is awesome! Would love to build one for my bashon brozz 250. I cant believe how cheap it was for you to build it. Hope you make some vids of you traveling and camping with it. Thanks for sharing your project 😁
@motohead117
2 жыл бұрын
I’m going to be towing behind my Tao Tao TBR7 !!!.
Great job price is right also really can’t beat it you only be towing it to and from
Very nice set up👍. Make another video of how too✌️
Good morning !! It is a great trailer video ! So nice idea for loading much more ! Have a nice day!
I need one built for my dog lol
nice work man looks good!
It's nice I'm jealous
Very nice Excelente
Nice setup 👍
Hows the emergency braking when fully loaded. Awesome build.
@motohead117
3 ай бұрын
It tracked perfect under hard braking
I'm wondering if tongue weight rules don't apply to axle mounted mono trailers.
Viewer wondering: how do you rego that? Will those attachment points survive? Anyway: not even putting lights on it
@motohead117
3 ай бұрын
No lights needed because the motorcycle lights are visible. No reg needed as it’s considered a part of the motorcycle
you need to change the ridged hitch setup, to a universal joint type or ball for better handling , it will handle better on freeway speed and wind and in the curves , ive been pulling every type of trailer you can think of for 45yr from big trucks to rv trailers to small trailers and all my motorcycle trailer
@motohead117
4 жыл бұрын
It needs a semi ridged hitch or it just falls over,this works good it’s a tried hitch setup that I’ve used before. The problem is light bike vs heavy trailer
Seems to be a great set up but missed the wheel type due to wind noise. What was the wheel brand?
@motohead117
3 жыл бұрын
In the video it had a GS500 front wheel. But it proved to be too heavy so the big box came off and a smaller box went on. Also the GS wheel came off and a CR85 front wheel went on. I shaved off over 35lbs !!.
@mrsietz
3 жыл бұрын
@@motohead117 Thank you...you have been a big help
Sure is a nice looking rig you have there, but with the front of the trailer having no suspension, the trailer is always going to have a very harsh ride. Suspend the front of the trailer from the bike frame.
Any advice for those with solid axels? I was considering a trailer setup similar to a bicycle trailer. I don't want to build a complex hitch that mounts to the frame. I ride a f650gs Your design looks perfect and ide like to copy it
@stephenandloriyoung5716
2 жыл бұрын
I made a simple arrangement to connect a trailer to my motorized bike - a rigid draw bar fastened to both sides of the bike frame, with a single vertical hole in the center behind the wheel, to pull the trailer. On the tongue of the trailer I welded a threaded end of a car inner tie rod end, and threaded an outer tie rod end onto it. The pin of the outer tie rod end goes down through the hole in the bike draw bar. This allows for steering , tipping of the trailer sideways in relation to the bike, (the tie rod can rotate on its thread) and plenty of fore-and-aft vertical travel. Tightening the tie rod end stud nut makes both bike and trailer hard to steal.
I realize this video is a bit older. I'm having a situation living off my bike that this would be the perfect solution. Do you still have this or do you sell them? I know I could build one if I had a place but I'm on the road full time.
@motohead117
3 ай бұрын
Don’t have it anymore but it would be perfect for someone living off there bike
Do you got a vid with plans for this? I'd love to make one similar myself
nice trailer but the turning radius of the trailer is too small on a tight turn you can fall of the bike the distance between the bolt and the front of the trailer has to be longer
@motohead117
2 жыл бұрын
🤣🤣🤣🤣🤣🤣🤣 Nothing wrong with this trailer at all !! It works flawlessly,what makes you such a expert ???🤣🤣🤣🤣🤣🤣🤣
Please can you share the plans
@motohead117
4 жыл бұрын
No plans,I just went in to the shop and started building
Sorry it's so windy I didn't hear about your rim and tire . How tall is it and where can I pick up one please.
@motohead117
2 жыл бұрын
It’s a Suzuki GS500 front wheel ( 17”)
@richardworden9747
2 жыл бұрын
@@motohead117 thanks much
Where can I get one ?
@motohead117
3 жыл бұрын
I built it myself,get a welder and start building !!👍👍👍👍👍
@joshtran854
3 жыл бұрын
Can you got me link for parts
@motohead117
3 жыл бұрын
@@joshtran854 eBay for a XT250/350 swing arm eBay for motorcycle shocks Metal retailer for tube steel
Need to add a fender on it to avoid water splash on you and your gears
What was the wheel off of
@motohead117
3 ай бұрын
Originally it was a GS500,later a CR85
Where can I get one ?