"WD 40 the movie"

@alberkahani7537

4 ай бұрын

Hahahahahahahaa

Good job! Well cared for even in the details. I seem to see me when they bring me bikes that have been thrown away in the courtyard for years and I completely renew them. Unlike, however, I rigorously put the loose spheres, I take photos of the original writings of the bicycle and reproduce them and reapply them so that these details are not lost (a detail I care about very much). But out of these differences you have made a masterpiece I love it even in the details. I also like the geometry of this frame ❤ (too bad it's not disc brakes)

Well shot and edited! I learn alot from you just watching your condensed videos.

Eu amo os sons do desmonte dos componentes... Abraços do Brasil! 🇧🇷

I love your style!!👍🏿 Awesome video!!💪🏿

I am digging this video so much. A classy ss build for a rusty old bike that surely was destined for a landfill. Excellent job. Also you found the right balance of including the right parts to shoot and edit and efficiently condensing several days/weeks of build labor in a tidy runtime. Great work!

@RustBucket_

Жыл бұрын

Thanks mate 🙏

Good save! Makin' something out of what's considered junk. Good on ya!

@RustBucket_

Жыл бұрын

Thanks man 🙌

Bel lavoro! Curata bene anche nei dettagli . Mi sembra di vedere me quando mi portano bici buttate in cortile da anni e le rinnovo completamente. A differenza peró io metto rigorosamente le sfere sciolte, faccio le foto alle scritte originali della bicicletta e le riproduco e le riapplico perche non si perdano questi dettagli ( un particolare a cui ci tengo molto ). Ma fuori di queste differenze hai fatto un capolavoro mi piace tantissimo anche nei dettagli. Mi piacciono anche le geometrie di questo telaio ❤ ( peccato non sia a freni a disco )

Nice build! 80s and 90s MTBs deserve some love and respect. Just wondering if you have any build details to share? I really like the paint that you used. Reminds me of the color of the race car that Mauri Rose won the 1947 and 1948 Indy 500 with. What paint is that? Also wondering what handlebar that is? What rims and tires did you install?

A gorgeous build! That paint is so niceeee and pairs very well with the tan tires and purple chainring! Great editing on the video too!

@RustBucket_

Жыл бұрын

Thank you 😁

Great build! Good for another 30 years

Clean build! Pretty sure you should tighten the stem adapter top cap bolt before the stem bolts on the steerer, to make sure the stem is seated all the way down :)

@heath6041

Жыл бұрын

A quil stem doesnt pre load the head set bearings. so it doesnt matter what order its done in

Nada más hermoso que armar una bicicleta desde cero!!!

I ride a GaryFIsher Genesis that looks a lot like this. I kept the old derailleur but it's blue with the drop bars and brown seats/tires. Dash Bicycle in Providence did it up for me.

That was an impressive transformation.

Nice build!

Excellent! Great name as well!

Very good restoration workmanship and a well detailed video.

Nice project mate. I like this 😎👍

Marin made nice steel frames, good project

Looks incredible

Really inspirational video. AAA+++

LOVE IT!

Mantap sekali kawan👍

Wonderful bike 👍

Nice bar tape !

Пыльник на переднем тормозе порезан. Одно только порадовало, цвет покраски приятный!

Neat bike bro

Nice build! What is the best single speed gear combination for a 26 inch wheel?

Nice… but will the rust not come back if you leave him there before repaint job? I always thought it has to be completed removed so that it will come through the new paint.

@davideorteschi4818

Жыл бұрын

I thought so too

@ricardoamaral2780

Жыл бұрын

I have a collection of old bikes, I restore them all myself, they are bikes that are decades old, I always remove all the old paint with paste remover so I don't excessively scratch the frame with a sander. Then I do an anticorrosive treatment on the frame before the new painting. Only when the old paint is well anchored and without traces of corrosion, I don't think it's necessary to remove all the old material.

@nick-ish

Жыл бұрын

Once over dust, twice over rust

Clasico 90s I love IT!!!

У меня тоже Marin, muirwoods.Спасибо производителю.

Great ! Do you have the reference for the colour ?

Really lovely rebuild. Could you link the parts used in the description? Would like to do a restoration similar to this

Definitely one of my new favorite channels!!!

wow amazing

Super wow nice job💯💯💯💯💯

@tmayberry7559

Жыл бұрын

Yes indeed 💯 💯💯💯🔥🔥👍

it's ok, vintage Marin mtb frames are very good, only one detail, you should put some sort of shield between the frame and a grass when paint it and hope you were wearing a mask

Greetings from the UK. A superb job. Well done sir!

Quedó muy bonita,de que color es?

It looks like you didn't mask the bottom bracket threads while spraying, sick vid so far though :)

What brand is the bar tape ? Looks nice 👌

Fantastic video - what is that bartape? ✌️

awesome

Nice saddle

May I ask what respray machine you use as I would like to get one

What tyres are they and single speed set up with that dueralliar where did you get the dueralia

I would personnally prefere that you keeped the cantilever brake, but it's mostly my hate of V-Brake talking here hahahaahhaah

just perfect

2:30 Bruh, respect the torx driver! You need to find yourself a set of real punches.

Did you stay with 26" tires or got to 700?

Great build .. but why a chain tensioner when the frame has verdict drops??

@acrowley6810

Жыл бұрын

Was wondering the same. I bet so the wheel can set as far back in the "horizontal" drops as possible and you dont have to worry about coming out of tension.. Cause with QR they will. Bolt on they will but just slower. So seating the wheel as far back in the drops as possible and adding a cool purple tension-er you dont have much worry.. Was thinking of doing the exact same thing cause with horizontals it either comes out of tension or starts to vear to a braking side.

Very nice job you did. Please do not confuse restore with rebuild. The automobile fanatics at Pebble Beach would make it very clear what the difference is. Once again, nice rebuild with modifications.

Were those mini v brakes or standard?

А на кой нужен натяжитель цепи при косых дропаутах?

Is that a 26er? If yes then I should try it with my bike too hahaha

I'm curious about the brake levers. Did they work well with v brakes? What's the brand and model?

@JonasPuischys

Жыл бұрын

Looks like Aliexpress ones tbh

@adredy

Жыл бұрын

ceazy .. Frankenstein

@valonnia

Жыл бұрын

Tektro also makes long pull drop bar levers RL520.

Nice Restauration...but who needs a Single speed Gravelbike 🤔🤷🏻‍♂️?

Absolutely the best way to make money on restoring old bikes is to make YT videos. Because even if you could sell the bike later, it's nothing compared to the monetization of the work. And the bike will not sell anyway.

The wd he put, is unexpected

Nice restoration although I'm under the impression that it has a bend front fork.

Veeery nice build, but i ask myself... what is the point about a single speed gravel bike? Like, wouldn't it it make sense to have some gears, or would you also ride a Mtb without gears?

@Digi20

Жыл бұрын

some people do, and its cheap.

What’s the point of having the tensioner on a single speed?

Tops

Do those road brake levers work well with the v-brakes?

@mosquitotigre7078

Ай бұрын

Lo dudo mucho, jaja. A ti y a mí no nos engaña con sus trucos, jiji

@ElFurioso

Ай бұрын

@@mosquitotigre7078 😂

Great build. It's hard to tell. Is that 700c or 26?

@padshance

Жыл бұрын

26

There is a ton of rust remaining beneath that paint 😂😂😂😂

thats my brader

@RustBucket_

Жыл бұрын

🤟🤟🤟

6:55 Is the centerline new or just restored ? Thanks Greate job btw 😅 ✋

Its 26 inc?

What kind of profit do you make on these restorations?

I think could be better with shifting. Still, awesome bike.

Not bad.

Keep the crispy paint job but put clearcoat

Pakai ukuran cranck dan cog berapa om?

What is wrong whis the fork?

Соотношение звёзд вообще убило! Этот велосипед теперь черепаха! Смысл ему было ставить руль баран для аэродинамики!???

Aro 26 ou 700?

Single Speed Gravel Restoration or how to use all the old parts you have lying around on one bike build.

Looks like you put an awful lot of new equipment on that bike.

Orang indo ternyata ,bang pake frame size 17 bukan? Kalo iya pengen coba tiruin 🤪🙏

@RustBucket_

11 ай бұрын

Iya om size 17 🙂

he should of put the marin brand on it

What's the purpose of that little purple gear that looks like a derailleur?

@RustBucket_

Жыл бұрын

Thats chain tensioner

@joaobikes

Жыл бұрын

@@RustBucket_ seu trabalho nessa bicicleta ficou incrível. Mas, acredito que não é necessário tensionador neste tipo de quadro de bicicleta, com gancheira horizontal.

@jameskiddlelivingtrust5508

Жыл бұрын

What brand of chain tensioner is that?

@RustBucket_

Жыл бұрын

@@jameskiddlelivingtrust5508 ztto

@hawkeyejrose

Жыл бұрын

Because of the type of dropouts, you would be lucky to have proper chain tension with single speed. You could try different size rings but a tensioner is better. Unless you have an eccentric bottom bracket (preferred but more expensive)

damn thats fucking cool

@reginaldonmatossarue2965

Жыл бұрын

Yehdgd

@reginaldonmatossarue2965

Жыл бұрын

Rehqh

Ukuran BB-nya kira2 berapa mm, bang? Saya lagi bangun sepeda 26 utk single speed juga

@RustBucket_

3 ай бұрын

Ukuran 113 om, belakang nya bisa di sesuaikan pake spacer biar lurus

What size is the bike?

@RustBucket_

4 ай бұрын

16 inch

Bannya pakai apa ya?

🇧🇷👏👏👏👏🚴

please tell me, what is the size of the wheels on this bike?

@RustBucket_

4 ай бұрын

26 inch

@Vucko_99

4 ай бұрын

@@RustBucket_ thank you bro!

@Vucko_99

4 ай бұрын

@@RustBucket_ please tell me the width of the new tires

@RustBucket_

4 ай бұрын

@@Vucko_99 26" 1.95 👌

no chain tensioner needed, horizontal drops 🤪

torque on some parts seems very low

Глупый вопрос конечно! Но для чего ставить натяжитель, когда диагональный дропаут, которым мы спокойно можем натянуть достаточно цепь!!!! Это лишний вес!!!

It’s not a restoration but a cool project never the less 👍🏼 Nice saddle as well, it probably doubled the value of the bike 😁👍🏼

好奇怪的走線

Fake Marin? Did someone just put Marin stickers on something else? 🤔

Quedo biem pero deberias dejarla original. Es de mayor valor.

I’m enjoying the bike so far kzread.infoUgkxMesz3KOGEmwmvyKQfLfrRSUXLFzfVHZA My only real complaints are the brakes and the pedals. I feel like a bike designed for bigger people should have much larger pedals and more heavy duty brakes. I’ve only gotten two really good rides out of it, minimal downhill action, and the brakes feel like they’re already going out. A larger person has more momentum, so I think this wasn’t thought through very well. Also, I wear size 13-14 wide shoes. My feet cramp up on these pedals that are clearly made for smaller feet. Since I’m not a pro rider (and I don’t think many are who purchase this bike) I don’t think that the straps on the pedal are necessary at all. None of this takes away from the enjoyment I get from riding, however. I’ll just head to a bike shop to improve on a few things.

mali ata pag higpit sa headset😂

era una Marin!!!!!!

Ça coûte combien à refaire ? Si C est le prix d un vélo c est pas intéressant...