What's the craziest sample you used and the result totally surprised you? Mine was my son's baby monitors...

@thnknde

3 жыл бұрын

Nerdy by Poison the Well tuned down like 7 semitones

@marioschammer9773

3 жыл бұрын

Mine was a Bottle that falling on the ground. (And get destroyed of curse).

@OmriCohen-Music

3 жыл бұрын

@@marioschammer9773 Perfect for crashes :)

@rmanpojo8485

3 жыл бұрын

I use my shauhachi to record. Sounds great if it doesn't crash VCV.

@elijah4929

3 жыл бұрын

My dad accidentally butt-recorded a tiny snippet of a song (like less than a second) that I pitch-shifted and turned into a pretty sick bass loop (imo) :)

Another nice trick 1) import a nice 4 on the floor or similar beat 2) trim the PEAK to get on the correct HOT spots 3) connect the peak trig to AR envelope and to a Sequencer 4) drive a bass and filter it and dynamic with PEAK CV out and you have a walking bass all along the sample

in version 1.0.17 I have debugged the envFollower (now no more BIZARRE oscillation at the start) (with smoothing is perfect) and added a RAMP representing the position of the playhead both outputs can be used to have important effects applied in sync with samples

I have quite a busy day ahead of me - annoying, because Omri has yet again completely inspired me to get really deep into yet another module. Surely this is one of the best modules in VCV? Amazing.

@OmriCohen-Music

2 жыл бұрын

It's an amazing module indeed!

Thanks Omri! I have been waiting for this one... finally (I think) I understand Simpliciter!

@OmriCohen-Music

3 жыл бұрын

Hey, that's great! It's such a powerful module I could do a 5 hours video about it and only scratch the surface so experimentation is needed :) Cheers!

Grazie mille for the SHOW! my preferred way to use simpliciter is using the internal modulation with a SQUARE wave, and playing with speed around 0.0 or something 0.05 and playing with UNI mode and inverted mode

There are so many good tricks and ideas in this one ! Thanks Omri

@OmriCohen-Music

3 жыл бұрын

Thanks!

I was looking forward to this video tutorial, so many possibilities. Thank you again, Omri.

@OmriCohen-Music

3 жыл бұрын

Cheers!

Great video Omri really demystified this module, thank you!

@OmriCohen-Music

3 жыл бұрын

Glad it was helpful!

Woooow so nice Omri, thanks for this one!!!

@OmriCohen-Music

3 жыл бұрын

Glad you like it!

Superb overview.wicked....the features are W🤯W ...the stuff your doing with cv out, modulation...and the add on ...so good 😩

@OmriCohen-Music

3 жыл бұрын

Thanks so much!

Thanks Omri ! great Tutorial as always !

@OmriCohen-Music

2 жыл бұрын

Glad you liked it!

An amazing module Omri, thanks!

@OmriCohen-Music

3 жыл бұрын

Cheers!

One of the best tutorials I ever had.

@OmriCohen-Music

3 жыл бұрын

Thank you!

A very useful video for me. Thanks!

@OmriCohen-Music

Жыл бұрын

Glad it was helpful!

My brain explodes during every one of your videos with the sonic possibilities 🤯 I was wanting to learn how to do real-time recording, slicing and mangling. Yay glitch!

@OmriCohen-Music

3 жыл бұрын

I'm happy I can help :)

excellent, as always! Thanks!

@OmriCohen-Music

3 жыл бұрын

Cheers!

excellent mate. thanks for inspring us

@OmriCohen-Music

7 ай бұрын

Cheers!

OK. Looking for years now for granular sampler who samples on the fly in sync and didn´t click with MI, Bastl and so on. Now I see this and made one for myself in half an hour around the Simpliciter. Cheeeeesus, thank you man!

@OmriCohen-Music

3 ай бұрын

Have fun!

OMG! Great tutorial. Nice plug-in

@OmriCohen-Music

Жыл бұрын

Glad it was helpful!

Thats my world! Thank you!

@OmriCohen-Music

3 жыл бұрын

Cheers!

27:03 effect with piano and wow reminds me of Nils Frahm : Says: piano piece..... I love it.

Love this module. Almost like a mini Octatrack in VCV. Sample mayhem, arm (trig) record,... Sweet

@OmriCohen-Music

2 жыл бұрын

It's a beauty!

Great module OMG

actually the sickest VCV module ive ever seen...

@AntonioTuzzi

3 жыл бұрын

impress me too! a LOT!

Amazing, Thanks!

@OmriCohen-Music

3 жыл бұрын

Cheers!

Perfect bro thanks

@OmriCohen-Music

2 жыл бұрын

Cheers!

yeah now we talking!! this is my fave module, holy shit vcv is really fucking powerful

@OmriCohen-Music

2 жыл бұрын

Have fun!

Helpful, thanks!

@OmriCohen-Music

3 жыл бұрын

Cheers!

Man....thank you !!

@OmriCohen-Music

Жыл бұрын

Cheers!

This is amazing because I sure don't have the money for a morphagene! I love you dude!

@OmriCohen-Music

3 жыл бұрын

Have fun!

very cool. Thank You

@OmriCohen-Music

3 жыл бұрын

Glad you liked it!

Thank you ❤

@OmriCohen-Music

7 ай бұрын

Cheers!

What the hell. Can’t believe I’ve slept on this module! So deep. Thanks Omri! Oh and do you have a day job? I can’t fathom how you are able to learn so much about all the modules, post amazing content, AND create your music! Maybe you don’t sleep?

@OmriCohen-Music

14 күн бұрын

I want to say that sleeping is for babies, but after having two, I know they actually don't really sleep... :)

Thanks Omri this was great, my favorite has been wine glasses and singing bowls, but I use the iPad version through MiRack. I like to record with Samplr then save to the Files app and bring in from there. Using the mixer is nice to split signals and record the out into another Simpliciter then out again to the mixer, tons of possibilities, thanks again...

@OmriCohen-Music

3 жыл бұрын

Cheers! I also experimented with wine glasses once. Filled a couple with water and tuned them to different intervals, it was fun :)

@annother3350

Жыл бұрын

The iPad needs a 'Files' app?!

Thanks!

@OmriCohen-Music

4 ай бұрын

Thanks so much!

I view This Tutorial for 2nd time an Yes Simpliciter is a great sampler player and amazing. I use it with my flute (shaku hachi) samples... much fun... and want to use this for future ambient track. Thanks...

@OmriCohen-Music

3 жыл бұрын

Yeah, I love this module as well. Cheers!

great tutorial.. thanks

@OmriCohen-Music

3 жыл бұрын

Cheers!

@rmanpojo8485

3 жыл бұрын

@@OmriCohen-Music Skol :-)

🔥🔥🔥

Thanks Omri - great tutorial; I really enjoy and am learning a lot from your lessons. I'd first watched this over a year ago, and when I tried to get the Click Out sound from the expander module, it wasn't working for me. I figured it was a bug that would get fixed eventually. I just watched the tutorial again today with a recently updated version of VCV Rack 2, and it still isn't working for me today. I'm wondering if I'm missing something obvious, or perhaps this functionality went away?? You were so excited by this functionality in the video; I wanted to share your joy. :)

@OmriCohen-Music

Жыл бұрын

Hey, thanks! Yeah, unfortunately, the developer has taken some time off from developing for VCV, so it was not fixed still...

@denkom67

Жыл бұрын

Oh well - thanks Omri! Still a pretty fun module.

Wow. Never really looked into this module. You could create like the world's most flexible 4 track recorder with these, building up loops and sound on sound on three seperate channels and then bouncing them to the fourth or something.

@OmriCohen-Music

3 жыл бұрын

The possibilities with this module are endless...

Thanks for your work! Using your videos as a reference for miRack on iPad. Very, very useful! One thing for Simplicite I'd like to clarify though. How do you quantize recording to the BPM with record trigger input?

@OmriCohen-Music

3 жыл бұрын

Thanks! Well, you can use S&H, for example, and use the clock as the trigger and a gate as the input so only with the clock there will be a change in voltage.

@heleste.x

3 жыл бұрын

@@OmriCohen-Music thank you!

Fantastic as always, Omri. I was a little confused during the CV output section to see the CV go to zero (like at 22:26) even though the sample was playing - there was amplitude! Have I missed something there? Thanks!

@OmriCohen-Music

2 жыл бұрын

Hey, thanks! And yes, that seems like a bug...

Great video, once again Omri! Anyone know how I might be able to save the sample from the Right Click Menu? I know the option is there but I can't access it on my laptop as it drops below the bottom of my screen.

@OmriCohen-Music

2 жыл бұрын

Oh, scrolling doesn't help? Maybe use a different resolution?

@midnightstepper

2 жыл бұрын

@@OmriCohen-Music No scrolling doesn't help. I got around it by entering fullscreen mode, but now can't exit fullscreen. :D

👏

I tried using the CV output the way you show in the video, and I found out that it's now something called "Ramp", and it works completely differently! Ah, well, VERY cool tool and another brilliant video, Omri! I'll see if I can figure out another way to use my voice to shape an envelope...

@OmriCohen-Music

3 жыл бұрын

Yeah, the Ramp is a new output but it's not replacing the CV out. The CV out is now the red output below the Peak output.

@borlip

3 жыл бұрын

@@OmriCohen-Music Well, slap my face and color me stupid, there it is! I'll have to start using my eyes when I try to do this stuff...Thanks a heap!

@OmriCohen-Music

3 жыл бұрын

@@borlip no worries

hey Omri , thank for the tutorial, it comming in the perfecto moment to me, I m looking for a sample to shot textures in the minute 3:48 should you connect the gate to the gate cv instead of the start?

@OmriCohen-Music

3 жыл бұрын

Thanks! Well, no, the Gate CV will activate and deactivate this mode, but the gate itself should go to the start input.

@DavidRodriguezb3d

3 жыл бұрын

@@OmriCohen-Music yes! thanks!! btw I love what you do with the percussive vibration, is brilliant

@OmriCohen-Music

3 жыл бұрын

Thanks :)

Hey Omri, do you know if the Simpler Tape Ctrl / Expander is also available for the iPad's Simpliciter in miRack? Cheers

@OmriCohen-Music

2 жыл бұрын

Hi! I'm not so sure, sorry...

@pangea2003

2 жыл бұрын

@@OmriCohen-Music thanks for your reply Omri!

Do you have to keep the sample in one location on your PC after you add it to the project? Thanks again!

@OmriCohen-Music

3 жыл бұрын

Well, yes, if you want it to load with the patch the next time you open it.

@20:12 what do you mean when you said it'll act like an osc sync? what is an oscillator syn?

@OmriCohen-Music

2 жыл бұрын

Well, oscillator sync means that one oscillator will be synced, will be locked to the frequency of another oscillator. In this case, you can sync the internal LFO to the frequency of an external one.

Hi guys, Hi Omri! When I connect the "Click" out to my outs or mixer or anything nothing happens, regardless of which buttons I press on the expander. Do I have to toggle that on or something?

@OmriCohen-Music

2 жыл бұрын

Hi! Yeah, it looks like it's broken... I also can't make it work.

@Mu1974

2 жыл бұрын

@@OmriCohen-Music I see, well at least it's not that I am just too stupid, lol. Thanks for checking it!

Hello, how can I synch the record function with the daw? I tryied "strat from the midi to cv modul" but it don't "stop" - I remember some tricks with flip flop but can't achieve it at this moment…

@OmriCohen-Music

Жыл бұрын

Hi! Yeah, I showed it once but I don't remember in which video... Basically, you can use the Trigger Buffer from ML. One input will be the clock from the DAW, and the other your trigger.

@gilax

Жыл бұрын

"How to Live Loop in VCV Rack" second part. I tryied to synch with the punch in/out of cubase…I'm asking too much@@OmriCohen-Music

Hey Omri, I've been trying (and failing) to use the Simpliciter to recreate the glitchy repetitions found in Neat Beats - Graffiti on a Monday Night kzread.info/dash/bejne/dKF3xpWkhsTNitY.html From 4:05 onwards. I tried loading the full sample and going with specific slices and also on-the-spot recording of a second sampler with short (50-150ms) gates. But mostly I'm getting lots of clicking noises, even with the anti-click cranked all the way up, and little usable effect. Do you have any idea how one could reproduce this?

@OmriCohen-Music

3 жыл бұрын

Yeah, that's a tough one... I would say make the splices in a DAW and load them in the Musical Box, for example, and sequence them.

@TheIRAmike

3 жыл бұрын

@@OmriCohen-Music Sequencing seperate splices in Musical Box sounds like a good idea thanks. I'll set it to gated mode and prepare the splices in advance with Simpliciter. Maybe the Espen trick option will also work in that use case. This is the trigger setup I used for getting splices from an active sample by the way, in case you want to try it: abload.de/img/simpliciterzojz7.png Top delay sets the length of the splice, bottom delay sets the length it's being looped before resuming the main sample.

@OmriCohen-Music

3 жыл бұрын

@@TheIRAmike Oh wow, this looks great! Nice idea man!

Omri, do you know if it's possible to quantize the record trigs with a host's clock so we can punch in and out recordings in time with the tempo / bpm and have the simpliciter to record to the clock??? Cheers

@OmriCohen-Music

2 жыл бұрын

Hi! Yes, you can use the trigger buffer from ML. Use the clock for the input, and the trigger to arm it. This will quantize the triggers to the clock :)

@pangea2003

2 жыл бұрын

@@OmriCohen-Music thanks! hope to figuring it out :) this will open so many options for music live performance! 👍

@OmriCohen-Music

2 жыл бұрын

@@pangea2003 no worries 🙂 let me know if you need any help with that.

@pangea2003

2 жыл бұрын

@@OmriCohen-Music it worked as a charm Omri! Many thanks ;)

great video omri! can i ask why aren't ctrl+left click or alt+left mouse working for me?

@OmriCohen-Music

2 жыл бұрын

Cheers! There might have been an update that changed things. This video was with VCV 1...

@giordanorosadoni5440

2 жыл бұрын

@@OmriCohen-Music thanks omri! Simpliciter remains One of the best modules ever

@OmriCohen-Music

2 жыл бұрын

@@giordanorosadoni5440 oh yes, indeed. Did you get the chance to check out Sussudio?

@giordanorosadoni5440

2 жыл бұрын

@@OmriCohen-Music not yet! I think i should, true?

@OmriCohen-Music

2 жыл бұрын

@@giordanorosadoni5440 yes, totally. You cannot sample with it but combined with Simpliciter, you can really explore sounds.

Is anyone aware of a manual or any documentation on Simpliciter? Could not see anything on the github.

@OmriCohen-Music

3 жыл бұрын

There are no manuals for most of the nysthi modules...

Thanks for this. The Morphagene would have nagged me to go modular for ever; now I don’t have to! Edit: the miRack version does not appear to have the ability to import samples directly via the ‘double-tap’ menu. There is a workaround of sorts- load the Nsythi Quadsimpler, to which you CAN import files, and record from there- but it’s clumsy. Am I missing something obvious?

@OmriCohen-Music

3 жыл бұрын

i have to be honest, I never tried miRack so I'm not so sure how much I can help with that...

@erwincoumans

3 жыл бұрын

​@@OmriCohen-Music That is interesting, you are not curious about miRack or you don't have an iPad? See above: "record with Samplr then save to the Files app and bring in from there."

@OmriCohen-Music

3 жыл бұрын

@@erwincoumans Yeah, I don't own any iOS devices...

@AntonioTuzzi

3 жыл бұрын

are you sure ? did you press on the white area to get the correct menu for import ? I'm 100% sure I tested it, I would have never released a module without import that is the MAIN character of this module !

@walrtbstudios5430

3 жыл бұрын

@@AntonioTuzzi Ah- I’m an idiot. I had been tapping on the sample area only, as you do in (say) Quadsimpler. In my defence, tapping outside the sample area is a little counter-intuitive... Thank you!

Nobody noticed that, around 9:30, the sample is played backward, and when Omri activate "Do Espen stor...", the sample is read forward, when varispeed knob is set to backward? :p (little bug?) (Then if you move the varispeed knob, it's fixed, I tested) Anyway, a free Morphagene, it's amazingly cool :) Thanks a lot Omri, you're doing a kind of documentation/manuel (which doesn't exist ^^).

@OmriCohen-Music

3 жыл бұрын

There are no bugs in the nysthi collection, only unintended features ;) Cheers!

is there anyway to play the slices you cut out in the order you want them? like say you make 5slices nd you want to play slice 2,4,3,5 in that order, can you do that?

@OmriCohen-Music

2 жыл бұрын

Yes, totally. You can use a sequencer to sequence the slices so each step is a different slice. Something like the ADDR from BogAudio can work great.

@afrosymphony8207

2 жыл бұрын

@@OmriCohen-Music isnt that what you did with the eoc to random? i was talking about ordering the slices to play in the exact order i want them to play

@OmriCohen-Music

2 жыл бұрын

@@afrosymphony8207 yeah, you can set a sequencer to do this for you. For example, step 1 will be slice 4, step 2 slice 3, step 3 slice 1, and so on. As I said, the ADDR is great for that.

@afrosymphony8207

2 жыл бұрын

@@OmriCohen-Music please do some kind of tutorial using this cause i have no idea how to do it lool sorry

the "cv output" is now a "ramp" ? is it a recent update?

@OmriCohen-Music

3 жыл бұрын

No no, the ramp is an added output, the cv out is still there. It's the Peak output.

Vcv is crashing when I am recording Simpliciter. Just after I hit the rec,.. after recording. Someone has a solution?

@OmriCohen-Music

3 жыл бұрын

I would say file an issue on Gitub, it's probably the best thing to do.

@rmanpojo8485

3 жыл бұрын

@@OmriCohen-Music Not clicking to fast works.... Nysthi Simpliciter needs time to react...!

@rmanpojo8485

3 жыл бұрын

True this works... thanks

The samples on this thing click so loud wtf

I don't think thats a poor man's morphagene, its much cooler and also easier to operate. Damn it can record and mangle CV, i just wonder why i spent thousands on complex LFO modules.