Simple Way to Turn a Vintage to Modern Flashlights | FUJI Novel H 147P
Тәжірибелік нұсқаулар және стиль
I bought this flashlight from Japan recycle shop only 1$. This is vintage Japanese flashlight 3W powered by 4 batteries type D. It is obsolete, but I still find it useful. The flashlight case is designed to be waterproof and it remains good condition. Just make it rechargeable and change the headlights, it will be modern.
Total price for this project is 20$
- Vintage Flashlight 1$
- Lithium battery 6$
- BMS 3S20A 1.5$
- Female DC power jack 0.5$
- 12.6V li-ion charger 4$
- Motorcycle LED headlights 5$
- Other 2$
Motorcycle LED headlights
Voltage range 12V-90V
Diameter 80mm
Lamp beads 8
Power consumption 18W
Light source 40W
Lumen 3000LM
Range 280m
Lithium battery cell
Model 18650-34T
Type 3C
Capacity 3400mAh
Voltage 3.7V
Battery Pack
Voltage 12.6V
Ampere 6.8Ah
Power 80Wh
Charging time ~25min
Before Flashlights 4.5V, 3W
New Flashlights 12V, 40W
I hope you find this video useful and enjoy!
I am happy to receive feedback, suggestions to improve myself.
!!! I'm sorry for the mistake if I did this video !!!
** I still keep some parts, I want to help preserve the world environment **
Thank you very much for your likes, comments and subscribe!
Have a nice day
Gear Show
Пікірлер: 548
That comparison at the end was worth the wait. Thank you for the videos. It always brightens my day when I get notified of a new one.
@JayDeeIsMyName
3 жыл бұрын
I'm glad be always shines a light on this kind of handy equipment.
日本の素敵なものをよみがえらせてくれてありがとう
Wow, those comparisons outside really shows the difference. Well done
@gear_show
3 жыл бұрын
Yes, I really like the new one. Thank you!
Amazing restore
Wow !!! What a difference between the new and the old.
Amigo estupenda manera simple, de convertir esta linterna FUJI Novela H 147P vintage en una moderna, mis respetos y saludos desde Venezuela 💯💯👍👊🤘
What a good idea - thanks for the video mate!
Amazing job and very professionally done 👍👍👍
Nice 'n' bright, now that's what I like!
Just think how bright a Large Fart Child LED would be!
Impecable video, gracias por compartir sus conocimientos y manualidad en el trabajo, saludos desde Uruguay.
Gave me a flashback to 20 years ago. Fitting a gel lead acid battery and charging socket. Lovely soldering.
@dangligor2745
3 жыл бұрын
Long ago have one gel pb battery flashlight. You need to keep it charget all the time when you not used and not discharget to blank, because the life of battery become short. After you used till full discharged need to recharge it in very short time because if you do not, start forming cristals of sulfuricPb who reduce capacity and after some time short circuit elements, battery become uselles. LiIon battery is more versatile, more recharging cicles and can survive to empty dry, more than pb battery. You need a flash Light dependable, for long usage and easy to maintain.
Great job, keep them coming, I'm hooked.....
@gear_show
3 жыл бұрын
Glad you like them!
Great job! Very nice conversion of that lamp!! Looks really good.
@gear_show
3 жыл бұрын
Thank you! Glad you like it!
@dangligor2745
3 жыл бұрын
@@gear_show Good work! You consider some impruvements? On the edge you have some leds you can use for signaling. You put 2 leds bicolor and add a simple voltmeter to show status of battery for one led and status of charging for another one. This is handy when you charge the flashlight from another source, say car lighter or solar panell. Status of battery is handy when Main power is off and need to use for days.
ಅದ್ಭುತವಾದ ಸುಂದರವಾದ ಕೆಲಸ 👌🙏 Great job sir ❤️🙏
Incredible transformation 👏🏻👏🏻👏🏻
@gear_show
3 жыл бұрын
Glad you think so!
Nice to see something different in this vid, keep up the good work .
@gear_show
3 жыл бұрын
Thanks, will do!
Good job 👏🏾 I love your channel
Thank you, lots of good information and a great job!
@gear_show
3 жыл бұрын
Glad it was helpful!
Damn now thats what I call an upgrade!
@gear_show
3 жыл бұрын
Thank you :D
@reahs4815
3 жыл бұрын
You can buy an even better flashlight for the same money but okay
Wow! Water resistant too.. good work again
Good job and great innovation
Oh man im great fan of your work...
Nice conversion 👌
Nice video ....this sort of stuff i am really into
Thanks for the information in the description and also for the video.
@gear_show
3 жыл бұрын
You're welcome, Glad you like them. Thank you for visiting my video again :)
Very good job! I like the result!
@gear_show
3 жыл бұрын
Thank you!
Kreatifitas tanpa batas.... Lebih mudah dan murah beli baru
I enjoyed this very much. Thank you
@gear_show
3 жыл бұрын
You're very welcome
Man I just love how you turn those tools into cordless.. Very cool. Keep it up. Cheers from Brazil
@gear_show
3 жыл бұрын
Thank you very much!
Everything vintage to modern tech is a great one.
Good job! I enjoyed your video, very interesting.👍
@gear_show
3 жыл бұрын
Thank you very much!
In mine i only want to change the classic light bulb with a 6v led one.
Nice touch
Good work
A masterpiece!👍
Amazing!!!!!! I'm in love with your works believe me,I wish I was your neighbor and your friend-I would bring a cooler full of beer with roast beef And a few more delicious things for both of us,And enjoy seeing the best show in town,I'm thrilled every time I watch your videos.God blessed you and thank you for sharing us.
@gear_show
3 жыл бұрын
Wow, I'm so happy to see your comment. Thank you very very much :)
Amazing restoration Sensei. 👍
@gear_show
3 жыл бұрын
Thank you very much!
Excellent vid thanks
Lovely job
@gear_show
3 жыл бұрын
Thank you! 😊
Cool video!
super workmanship
Awesome light 👍🏻
@gear_show
3 жыл бұрын
It really is!
Good job man.
Very cool :) greetings from Poland :)
Good job.
Great Idea . Thank you
Nice! But one problem you may have is overheating....I converted some old Ryobi one 18v flashlights with incandescent bulbs to use 12V MR16 LED Tract light bulbs. The bulb are designed to operate between 12 and 24v so work well with up the 21 volts you get out of 18v lithium tool batteries. However being sealed up in the flashlight the bulb did burnout after 45 minutes of continuous use and I had to drill some ventilation holes in the housing to a void ruining another bulb. Vent hole would unwaterproof your light. So you may want to just avoid running the light continuously for long periods.
@gear_show
3 жыл бұрын
Okay, I appreciate with your information :)
@DinnerForkTongue
3 жыл бұрын
Yea, if you want your LEDs to burn bright, you *_NEED_* heatsinking. No two ways around it.
@jurivlk5433
3 жыл бұрын
@@DinnerForkTongue The reflector has some beefy heatsinks!
Nice job bro! Keep uploading videos!
@gear_show
3 жыл бұрын
Thanks! Will do!
Very talented. Here in America we seem to have the "throw away mentality." Good job! 😁
@gear_show
3 жыл бұрын
Thank you so much! I hope they saw this video.
@troyna77
3 жыл бұрын
Gear show has saved many old tools and given them a second chance. We need more of this in America.
@tristansimonin1376
3 жыл бұрын
Same in France we you look at trash bin there is so much things who worked well but it's old so people throw it
@kdzenins
3 жыл бұрын
Not always that mentality is bad, he says that he spent 20$, I don't think you can buy 6 lithium battery's for 1$ a piece, maybe used. Also I think that the prices are without shipping. He put some time in making this as well. For the price you can get a similar flash light from china without the effort of waiting for each part to be shipped. Videos like this are for learning and entertainment.
@georgel3657
3 жыл бұрын
Probably not the worst thing America has going for it tbh
Amazing keep it up
I have the same kind of battery pack just with samsung inr18650 from a old laptop. Where can i find the led ? Tyia
Very illuminating video
@gear_show
3 жыл бұрын
Thank you :)
Well made👍
@gear_show
3 жыл бұрын
Thank you!
Very Good...!!!
Nice work!
@gear_show
3 жыл бұрын
Thanks for the visit
What kind of solder did you use? Excellent restoration by the way!
鈴木さんのサムネイルで来ました 懐かしい形の懐中電灯だね
amazing work 👌🏻.
@gear_show
3 жыл бұрын
Thanks a lot 😊
This well done 👌👌👌
Excellent !
@gear_show
3 жыл бұрын
Many thanks!
Very nice 👍 work 👍
@gear_show
3 жыл бұрын
Thank you so much 😀
nice good job
Reminiscent of childhood days😍🥰
@joewalsh1054
3 жыл бұрын
When you were a small fart child?
@xman530
3 жыл бұрын
@@joewalsh1054 When I was 8/9 years old😆
amazing!!
Nice!
This actually looks like a restoration I'd love to do myself. Greetings from the Netherlands.
Sure , run it non stop for a while and see the heat sink melting the plastic. Thumb up for making the video 👍
The LED flashlights are leaps and bound better than the traditional lights. I wonder if the heat management of the upgrade will be an issue for prolonged use?
Cheers to all the Smart Fart Childs out there. Wherever you may be.
Hello,great restoration! please an information: I would attempt a similar projects myself, but can't find led projector/motorcycle headlight. Could you please link me the ones you use in this and other similar projects (the hilti lights for example)? Thanks a lot for the help! You're good, keep going!
Very impressive
@gear_show
3 жыл бұрын
Thank you!
Merci pour ta video très détaillait sur l'amélioration de cette lampe 👍🏻
Exelente video !!! Gian de lima peru
8:56 - "Small Fart Child" !!!
0:12 The name of the former owner is "鈴木" (Suzuki).
@josepalacid
3 жыл бұрын
😂😂
@TheMijman
3 жыл бұрын
Huh. You're right.
@Im_The_Slep
3 жыл бұрын
Vtec vtec vtec
The heat from the leds dissipation will reach those batteries, better thermal isolation between the batteries and heat sink will make last longer.
@farrelrivandi170
3 жыл бұрын
better use it underwater
It's amazing!
@gear_show
3 жыл бұрын
Thank you!
Excellent one, lad. Go find more of those vintage flashlights from thrift stores and flea markets, then modernize them with LED lights, rechargeable batteries and power input battery charging.
Good idea
@gear_show
3 жыл бұрын
Many many thanks
Excellent
@gear_show
3 жыл бұрын
Thank you so much 😀
very good your video,greetings from Mexico city amigo !!!! 👌👍✌
@gear_show
3 жыл бұрын
Wow, I'm so glad that this video popup in Mexico city :D
Next, 'simple way to convert your car into a star wars land speeder'
@robot25530
3 жыл бұрын
😂😂👍
@someguyontheinternet-
3 жыл бұрын
Wait, do you mean to tell me that there's a simple way?
@Jim-lv6jc
2 жыл бұрын
I would love to see that
Still have not found a purchasing link for that LED headlight... Anyone has?
Hello brother nice video 👍
Fantástico trabajo !
@gear_show
3 жыл бұрын
Thank you!
I really love your portable battery fume extractor fan. Would be nice to have!
@gear_show
3 жыл бұрын
Oh, that is very simple to build, Glad you like it.
Thenks
We are watching fondly Greetings from Turkey
@gear_show
3 жыл бұрын
Yes, thank you very much!
Fantastic video as I have an old torch like that, if you have a link or shop name to get the led light that would be fantastic. Do you have a video for the soldering fan please? Please keep making these videos and just ignore the silly comments.
Super I like this channal very much
@gear_show
3 жыл бұрын
Thank you so much 😀
Неплохо! Молодец мужик! И мотоциклетная фара так удачно подошла!
Marvelous...
@gear_show
3 жыл бұрын
Thank you very much!
Awesome
8:22 li-ion chaegeer? Lol
@hughmungus1072
3 жыл бұрын
Probably the same company that makes the "Small Fart Child" led 8:55 😂
@belarus4790
3 жыл бұрын
@@hughmungus1072 Chinese English)))
@SteifWood
3 жыл бұрын
@@belarus4790 = Chinlish
@vataslab9700
3 жыл бұрын
XD
@kushalbhaskar4401
3 жыл бұрын
😂😂😂😂😀😀....❤️❤️❤️❤️❤️...
Small fart child and li ion chaegeer. This is getting better XD.
@RadioWerwolf
3 жыл бұрын
Chinese-English
I’m Suzuki from Japan. I lost my flashlight last year and it’s yellow one. Did someone seen it?
@sunsys0
3 жыл бұрын
No it is not, my name is Honda and I am from Japan and this flashlight is mine.
@PVZBlover
3 жыл бұрын
Kawasaki Founded The Flashlight And Donated To Gear Show From Cambodia
@user-oq5yr1kp1d
3 жыл бұрын
Hi , I’m Kim from Korea. Did you know? Koreans invented flashlight. Bring it to me or else , no more Hyundai’s for your country.
Thanks 👍👍
Nice video. Can you please share links in description from where parts can be purchased?
nice