Note: This is the first knife I made and I didn't heat treat it because it didn't occur to me that it should.

@mariorodrigues5796

Жыл бұрын

Com crtza ficou muito legal parabéns 🤟🤟🤟🤟

@namesmud9510

Жыл бұрын

aren't sawblades heat treated already? idk much about knife making though

@woodworkcrafts

Жыл бұрын

@@namesmud9510 Maybe

@vladalex3876

Жыл бұрын

@@woodworkcrafts only saw teeth were heat treated

@woodworkcrafts

Жыл бұрын

@@vladalex3876 Thank you for the clarification.

ماشاء الله، جميلة واقتصادية

the pinnacle of creativity🤩

Got to love the angle grinding with flip flops.

@woodworkcrafts

Жыл бұрын

Normal.

Ficou Top demais parabéns 🇧🇷🇧🇷

I was a little worried about installing the blade after reading a couple of reviews. But it was amazingly easy. Took about 1 minute. Works great kzread.infoUgkxjpBI8OOeUXib_iT7UomCrQ-uauwZJ62c . Cuts easily and is perfect for pocket cuts I needed to make for replacing some old deck boards.

Great video! And I love the profile/concept you came up with, even incorporating the hole of the saw blade! This has really inspired me to make a knife from some of my own old saw blades.

@woodworkcrafts

Жыл бұрын

Don't forget to show me when you make it.

Parabéns você é um mestre

Thanks 4 the tips I think I'll try making my own

Good job for a first knife!

Beautiful knife well done .

I’ve made several knives from this material light weight really sharp. The metal is hard enough. Yet makes good edge.

Mto show amigo Parabéns

Very cool.

That's​ great.

Good Job. Congrats

Great job 👊😎

Great work....

Keren mantap aku suka fidionya

Nice video. Like one of the comments said I too thought saw blades were heat treated. I thought leaf springs, spikes, wrenches and such only needed that. I would love to try this. I can handle cutting out the blade but putting on a handle would give me trouble.

@woodworkcrafts

Жыл бұрын

Good luck and be careful.

Not bad for your first one, better than my first one that's for sure.

Sweet build and blade my friend.

@woodworkcrafts

Жыл бұрын

Thank you.

Inspiring vid. Ive been saving old saw blades and wondering what i can make them into. Think ill try a knife. 🤔 TY!

@woodworkcrafts

Жыл бұрын

Good luck.

สวยครับ

Super 👌

Nice

Mantap sir

Nice work, however always cover your blade with a paper or old cloth and then wrap some tape to avoid injury to your self while working, and to avoid scratches on the blade polish.

@woodworkcrafts

Жыл бұрын

Ok, thank you.

@user-cd9gk7lj9p

Жыл бұрын

@@woodworkcrafts

👍👍👍

👍👍👍👍👍👍

Dude.......the only words that come to mind is doooode, this boys been making these for a minute! Awesome simply awesome. Any thoughts in heat treating your steel???

@woodworkcrafts

11 ай бұрын

No, I don't treat it.

Quá tiệt

Saludos muy bonito trabajo voy hacer uno así que disco usastes la medida si se puede saber felicidades

@woodworkcrafts

6 ай бұрын

Thank you.

Apakah pisau ini buat cacah tulang ga gombal om..

@woodworkcrafts

Жыл бұрын

For chopping vegetables and meat.

❤🎉🎉❤

Is a saw hardened steel or doe we first need to heat treat it

@woodworkcrafts

Жыл бұрын

It is a saw hardened steel, and some say it does not need to be treated.

I tried cutting a shiny bandsaw blade with an angle grinder but the grinder just slipped off and it was very difficult. Can anyone tell me why?

@woodworkcrafts

Жыл бұрын

Take care, the angle grinder is dangerous. It requires experience and good hand control. If you are a beginner, I advise you not to use it.

@randyames992

9 ай бұрын

Use as thin a grinder wheel as you can find. It will follow your outline much easier that a thicker wheel.

Que tamaño es la cierra tengo un pre creo es mas pequeña que la tuya quero hacer uno

@woodworkcrafts

Жыл бұрын

Un poco menos de 30 cm.

Where we can buy those

@woodworkcrafts

8 ай бұрын

What do you mean by more? Can you be more specific?

I thought you were going to pull out the angle grinder to cut the scales out! Shame about the heat treat, but a good learning exercise for next time.

What drill bit did you use? I can't drill circular saw blades with the bits I have.

@woodworkcrafts

9 ай бұрын

Maybe you should use another new one.

@randyames992

9 ай бұрын

I've tried that....I wonder if maybe a carbide or tungsten bit...I have also tried a masonry bit with no success

@woodworkcrafts

9 ай бұрын

@@randyames992 I use a normal drill bit and have no problem with it. Try with a stainless steel drill bit.

@randyames992

9 ай бұрын

I'll try that. Thanks so much for the feedback.

@Kevinhobbytime

7 ай бұрын

You’re having a hard time drilling because saw blades are hardened steel. If you heat the spot you want to drill with a torch to red hot and let it cool you can drill it easy. Dont get the blade edge red hot you will ruin the hardness.

Осы шебермен қалай ауызба-ауыз телефонмен тілдесуге болады?

@woodworkcrafts

Жыл бұрын

You can by e-mail or Facebook page.

🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰

I prefer something that will not rust

@woodworkcrafts

Жыл бұрын

It is an experience above all.

@user-cd9gk7lj9p

Жыл бұрын

@@woodworkcrafts I had fun making knives with my neighbor. I learned about all types of knove making material. My fav is D-2 steel

สนใจ

Just as well you didn't heat treat it; most of the saw blade knives I've made warped like bananas even before the quench.

@woodworkcrafts

Жыл бұрын

It's my first time making a knife and I didn't know it had to be heat treated, maybe next time. Thank you for your comment

@brysonalden5414

Жыл бұрын

@@woodworkcrafts I keep my first knife on my desk as a lesson in humility! Trust me, your first knife is way better than my first one.

Why not use stanless steel 317 its tougher flexibile durable than clasic steel that rusts and is fragile

@woodworkcrafts

Жыл бұрын

Maybe later, thanks for the tip.

@musicgurufan8771

8 ай бұрын

This video get the steel from old saw blade. Where to get stainless steel 317 from?

@raresboghean2974

8 ай бұрын

@@musicgurufan8771 In oder to have a saw blade you need a chainsaw which is not that cheap by they way the cost getteing the blade is higher than buying a piece/bar of stainless steel for your project is not that expansive The cost of geting the stanless steel bar is overall cheaper

How much cost one of those

@woodworkcrafts

2 ай бұрын

I don't know.

Do you not need to heat treat the blade?

@woodworkcrafts

Жыл бұрын

I didn't know he needed that.

@marktate4466

Жыл бұрын

I have read in comments on other videos that saw blades are already tempered, I would like to know if that is so.

@woodworkcrafts

Жыл бұрын

@@marktate4466 I also heard that and don't know if it's true or not.

@toebarsrealm3773

Жыл бұрын

Not sure if it needs it or not but, (from my unknowledgable perspective) isnt the metal already high quality with no further heat treat? Dunno.

@dereksteele2284

7 ай бұрын

​@@marktate4466yeah, but the heat from that angle grinder takes the heat treat out of it

It's a cool blade but almost all my attention went to you using a HUGE angle grinder to cut out a SAW BLADE that being held by ONE clamp and you wearing shorts and sandals...jesus christ that's stupid dangerous

@woodworkcrafts

Жыл бұрын

I take all appropriate precautions while grinding. It may not be visible in the video for you.

@Fizzure3000

Жыл бұрын

@@woodworkcrafts It is tho, everything is visable, including your one clamp and your shorts and sandals. You are lucky your angle grinder didn't caught the saw blade and have it fly off and chop your leg off

@bpdub21

Жыл бұрын

If you want to make a knife while wearing flip flops, make a knife while wearing flip flops!

@Fizzure3000

Жыл бұрын

@@bpdub21 And take the consequences for being an idiot and enjoy your cut off foot when it happens.

@Mac-tf5fy

11 ай бұрын

And that plastic table while cutting saw blade😢

That knife isn't going to hold an edge. All that heat from that grinder, and not tempering it? Waste of time

@woodworkcrafts

7 ай бұрын

It's not waste time, this is my first knife.

@dereksteele2284

7 ай бұрын

@@woodworkcrafts if it's not functional, then it's a waste of time

@behar

6 ай бұрын

@@dereksteele2284I don’t think you get to dictate what is and isn’t a waste of time for him. If he’s happy with it, it’s not a waste of time.

@dereksteele2284

6 ай бұрын

@behar its a waste of time, if it's not usable

@behar

6 ай бұрын

@@dereksteele2284 Did you read my comment? That’s not for you to determine.

Tempera

@woodworkcrafts

Жыл бұрын

?

You burnt the steel.🤦‍♂️

@woodworkcrafts

Жыл бұрын

This is the result of friction because it is solid.

Класс !!!

👍👍👍