Simple INVERTER 12V to 220V from ATX supply part1

Ғылым және технология

Simple INVERTER 12V to 220V from ATX supply
Part 2 here : • Converts 220VDC to 220...
This is a simple inverter, most components are taken from ATX supply. It has a power 300W, you can charge your phone, charge your computer, television, light bulb, not for fans.
this is part 1, in part 2, i will convert 220VDC into 220VAC.
Facebook group : bit.ly/CreativeElectronic
Download file here: www.mediafire.com/file/zcv9up...
Part 2 : • Converts 220VDC to 220...
#12Vto220V
#Inverter
#SG3525

Пікірлер: 221

  • @PhdHung
    @PhdHung5 жыл бұрын

    This is a simple inverter, most components are taken from ATX supply. It has a power 300W, you can charge your phone, charge your computer, television, light bulb, not for fans.This is part 1, in part 2, i will convert 220VDC into 220VAC. Facebook group : bit.ly/CreativeElectronic Download file here: mshare.io/file/ms39zwXL #12Vto220V #Inverter #SG3525

  • @mehmetalikara6187

    @mehmetalikara6187

    5 жыл бұрын

    What are the current values of the circuit at no load and load. Why is there no need for feedback? What is the difference between the ferrite core transformer and the sheet core transformer?

  • @ashokbalasubramani9495

    @ashokbalasubramani9495

    5 жыл бұрын

    Hi sir I need this circuit can u give one I 'll pay u

  • @ashokbalasubramani9495

    @ashokbalasubramani9495

    5 жыл бұрын

    I need tis 1 can u give 1 I pay u

  • @paksokhom2675

    @paksokhom2675

    5 жыл бұрын

    Where can we get ATX supply from?

  • @mirnawatimirna3427

    @mirnawatimirna3427

    4 жыл бұрын

    look and help me ... make a video lesson to rewind the ei33 transformer that has a trunk (elephant transformer) to be installed on this inverter..🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏

  • @PhdHung
    @PhdHung5 жыл бұрын

    Part 2 : kzread.info/dash/bejne/p6qX0MuJYN3bkbQ.html

  • @MohitSK
    @MohitSK5 жыл бұрын

    Wow! Thanks for such a valuable information to utilise Dead SMPS parts...Nice one...Good job

  • @PhdHung

    @PhdHung

    5 жыл бұрын

    thanks for watching

  • @kemadpml7179
    @kemadpml71795 жыл бұрын

    Kembangkan terus jangan berhenti gali dan gali terus penemuan anda pasti bermanfaat bagi orang lain klo mau menyimak dan mempraktekkan langsung jangan sayang buang modal

  • @herribrahim2049
    @herribrahim20494 жыл бұрын

    Thank you my friend, my sincere greetings You have worked hard to revive the Tesla Project. Nice to meet you friend good luck

  • @PhdHung

    @PhdHung

    4 жыл бұрын

    Thanks

  • @leandrolopez4113
    @leandrolopez41135 жыл бұрын

    Excelente amigo. Desde Argentina 💪

  • @PhdHung

    @PhdHung

    5 жыл бұрын

    Gracias. Que tengas un buen día

  • @walterriesenberg640
    @walterriesenberg6405 жыл бұрын

    Very good, you can do this same thing but with feedback, to keep the 220v stable, thanks

  • @Pilotfly2023
    @Pilotfly20235 жыл бұрын

    Very good,friend! Thks...

  • @PhdHung

    @PhdHung

    5 жыл бұрын

    thanks bro. Have a nice day

  • @walterriesenberg640
    @walterriesenberg6405 жыл бұрын

    Muy bueno como siempre, gracias

  • @PhdHung

    @PhdHung

    5 жыл бұрын

    Gracias por ver

  • @eddychilley6122

    @eddychilley6122

    5 жыл бұрын

    Component name please

  • @MultiBwee
    @MultiBwee5 жыл бұрын

    True , another great video

  • @PhdHung

    @PhdHung

    5 жыл бұрын

    Thanks for watching

  • @antonioherrera-yc4ei
    @antonioherrera-yc4ei5 жыл бұрын

    great tutorial bro but parts list be nice thx

  • @joseluishidalgomontilla1093
    @joseluishidalgomontilla10935 жыл бұрын

    SALUDOS DESDE VENEZUELA

  • @fury4076
    @fury40765 жыл бұрын

    Another Great video

  • @PhdHung

    @PhdHung

    5 жыл бұрын

    thanks bro. Have a nice day

  • @werewolf6085
    @werewolf60855 жыл бұрын

    Homemade 102 you are the god !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  • @PhdHung

    @PhdHung

    5 жыл бұрын

    Thanks for watching

  • @rogerioeletronicos639
    @rogerioeletronicos6394 жыл бұрын

    congratulations very good friend

  • @PhdHung

    @PhdHung

    4 жыл бұрын

    Thanks

  • @tmpinkfloydichooselove7199
    @tmpinkfloydichooselove71992 жыл бұрын

    Hello dear friend, Mr. Engineer. I like your work very much. It is very accurate and high quality. I would like to make a sample of your work for myself. As long as I use it. I pray for you. If you please. Send me the circuit map. Thank you very much. Sincerely: Rad

  • @Edmorbus
    @Edmorbus5 жыл бұрын

    Thanks for sharing

  • @PhdHung

    @PhdHung

    5 жыл бұрын

    thanks bro

  • @kingofpaint9720
    @kingofpaint97205 жыл бұрын

    Good project

  • @PhdHung

    @PhdHung

    5 жыл бұрын

    thanks bro

  • @fernandoquintero6940
    @fernandoquintero69405 жыл бұрын

    Amazing!!

  • @PhdHung

    @PhdHung

    5 жыл бұрын

    thanks bro. Thanks for watching

  • @basileok2222
    @basileok22222 жыл бұрын

    Pencil and paper were invented to draw a pattern, as true electronics engineers do.

  • @nidhindas7702
    @nidhindas77025 жыл бұрын

    Hi friend, i am doing same type of project, i am referring your all videos all are great, i appreciate your effort i know its hard to design this type of supplies. I have small request, please check output voltage with respect to increase of load say 60,100,200,260,300,360...my expectations is that the voltage should be constant but its decreasing. I hav manually adjusted the width of pwm but still i couldn't able to achieve.. Thanks god bless you.

  • @PhdHung

    @PhdHung

    5 жыл бұрын

    If you want, I will design it for you.

  • @nidhindas7702

    @nidhindas7702

    5 жыл бұрын

    @@PhdHung yes try please do that modification in your other video of 2000watts.. Thanks

  • @ClecianoSilvaKl2023
    @ClecianoSilvaKl20234 жыл бұрын

    Me mande o esquema desse projeto pois quero montar um desse

  • @rkmd3943
    @rkmd39434 жыл бұрын

    Waooow excellent

  • @ClecianoSilvaKl2023
    @ClecianoSilvaKl20234 жыл бұрын

    Olá amigo faça um desenho desse inversor eu n entendi as ligaçoes

  • @spandandutta2485
    @spandandutta24855 жыл бұрын

    Which two pins of el 35 transformer will connect to the ground...is it always the two pins to the right?

  • @electroniquepassion
    @electroniquepassion5 жыл бұрын

    Nice 👍✌️

  • @PhdHung

    @PhdHung

    5 жыл бұрын

    thanks bro. Have a nice day

  • @ienTuDIY
    @ienTuDIY3 жыл бұрын

    cái này không có hồi tiếp mà dùng cho sạc laptop có bị sụt áp nhiều ko a

  • @ClecianoSilvaKl2023
    @ClecianoSilvaKl20234 жыл бұрын

    Amigo me mande o esquema eletrico desse projeto

  • @sumbul1577
    @sumbul15775 жыл бұрын

    Thank sir

  • @PhdHung

    @PhdHung

    5 жыл бұрын

    Thank you for watching

  • @sabarinath4527
    @sabarinath45274 жыл бұрын

    Hi I have made the circuit, but the problem is the MOSFET's getting tremendously heated up. I have used 6A diode and 470uF/200v cap instead of 330uF, which was available with me. Plz reply

  • @amirmahdisalari3528
    @amirmahdisalari35285 жыл бұрын

    Very nice

  • @PhdHung

    @PhdHung

    5 жыл бұрын

    thanks bro

  • @sachinsatheesh1662
    @sachinsatheesh16625 жыл бұрын

    hi there, i constructed the circuit as mentioned but the mosfet 3205 as well as z44 is getting hot and gradually fries out. so i have re winded the transformer as mentioned in your other video but the result is the same. i have used the diode FR207 as well as the capacitor from old smps. please advice any remedy if available

  • @PhdHung

    @PhdHung

    5 жыл бұрын

    Check pulse at PIN 11 and 14 of sg3525 before welding mosfet.

  • @nandeepkhajuria2326
    @nandeepkhajuria23265 жыл бұрын

    Please please make a video on how to make a UPS for computer with automatic on and off and with automatic charging

  • @PhdHung

    @PhdHung

    5 жыл бұрын

    yes, i will do it, wait me

  • @paksokhom2675
    @paksokhom26755 жыл бұрын

    Sincere appreciation! Where can we get the circuit board from? It seems to be ready made for this circuit.

  • @PhdHung

    @PhdHung

    5 жыл бұрын

    Facebook group : bit.ly/CreativeElectronic Download file here: mshare.io/file/ms39zwXL

  • @AzizKhan-vv8so
    @AzizKhan-vv8so2 жыл бұрын

    You make self . Enjoy yourself.

  • @arissurahman1070
    @arissurahman10704 жыл бұрын

    Sir, what components are you looking for? To be clearer

  • @antoniobejarano348
    @antoniobejarano3483 жыл бұрын

    hola, atentamente para usar esta inverter tienes que medir la intensidad para saber los wats y eso no lo he visto del cicuito y eso no lo he visto. gracias.

  • @PhdHung

    @PhdHung

    3 жыл бұрын

    ok

  • @niminravendran4339
    @niminravendran43394 жыл бұрын

    Hello, iam making simple atx trasformer using inverter, Then power on fr 207 diode is short then MOSFET Very heat 3205 short. What is the reason????? Pls replay.....

  • @koppo5657
    @koppo56573 жыл бұрын

    i dont understand the capacitor part on the schematics. Where are they connected to? Where does the transformer go?

  • @irapashunnur8237
    @irapashunnur8237 Жыл бұрын

    Great. Pl share the circuit diagram.

  • @irukandji89
    @irukandji892 жыл бұрын

    Did you use center tap of the transformer

  • @dharmeshvadhiya3072
    @dharmeshvadhiya30725 жыл бұрын

    24v dc to ac ke se banaye ye

  • @noelsasu6101
    @noelsasu61013 жыл бұрын

    Good work done BUT no Circuit diagram is shown

  • @doost6233
    @doost62337 ай бұрын

    Need to show the circuit.

  • @user-cs4yb8cb4g
    @user-cs4yb8cb4g5 жыл бұрын

    Haha, we know what Keda is Antina Torina skill in welding

  • @mehmetalikara6187
    @mehmetalikara61875 жыл бұрын

    What are the current values of the circuit at no load and load. Why is there no need for feedback? What is the difference between the ferrite core transformer and the sheet core transformer?

  • @nidhindas7702

    @nidhindas7702

    5 жыл бұрын

    At no load it will be considerably less say around 1 amps, sheet core transformers are too bulky and only meant for low frequency(hz range ) usage instead ferrite works in khz range.. Design complexities for ferrite is more.. I hope u got..

  • @hustlaz2k
    @hustlaz2k3 жыл бұрын

    is this dc - dc converter? u mean that 220v output is dc? thanks.

  • @mdtofajjal
    @mdtofajjal11 ай бұрын

    ❤❤Bhai gives two circuit diagrams❤❤❤

  • 4 жыл бұрын

    mass match on it and it always burst .. follow but failed.

  • @gialuancomputer
    @gialuancomputer5 жыл бұрын

    minh làm giống như bạn sao áp ra có 132vdc thôi. có phải do biến áp xung của mình không giống với của bạn không. mình cũng lấy trong nguồn atx

  • @PhdHung

    @PhdHung

    5 жыл бұрын

    đúng r. cái này phải nhân áp. nếu ko nhân áp phải quấn lại cục ATX . kzread.info/dash/bejne/qZlttpN-pra1cpM.html

  • @baoanhle6085

    @baoanhle6085

    4 жыл бұрын

    @@PhdHung tôi thấy add đã dùng mạch nhân áp (2 con tụ ), tôi muốn hỏi tôi có thể dùng BAX lấy trong con TG1000 không nhỉ? có cần quấn lại sơ cấp và thứ cấp không?

  • @Khalilkhan6120
    @Khalilkhan61204 жыл бұрын

    Is this a high frequency ferrite core transformer used?? Or its 50 or 60 hz

  • @PhdHung

    @PhdHung

    4 жыл бұрын

    This is the pulse transformer (ferrite core) it works at 30Khz

  • @Khalilkhan6120

    @Khalilkhan6120

    4 жыл бұрын

    Diagram file dowload networkin why??

  • @noelsasu6101
    @noelsasu61013 жыл бұрын

    Please you are doing good job but it seems you are hiding the Circuit diagrams from us. How do we arrive without the Circuit diagrams ??????? Please my questions. Thanks

  • @jinebuwan9549
    @jinebuwan95492 жыл бұрын

    Can be use for dc fan?

  • @user-rg6vt1mx5n
    @user-rg6vt1mx5n4 жыл бұрын

    i found here ic cm6800 and 20n50 mosfet then how i make the circuit which components are need to add on them to make above 500 watt inverter circuit

  • @PhdHung

    @PhdHung

    4 жыл бұрын

    I will try to design, wait for me

  • @user-rg6vt1mx5n

    @user-rg6vt1mx5n

    4 жыл бұрын

    Okey ...

  • @ajaythakur-ng6mw
    @ajaythakur-ng6mw4 жыл бұрын

    sir how to add charging section for battery charging and overload low battery protection in this circuit

  • @PhdHung

    @PhdHung

    4 жыл бұрын

    You should make another circuit, the power of this circuit is small.

  • @mayokundeji4846
    @mayokundeji48464 жыл бұрын

    i use my soldering iron of 60watt on it and d fets went off. cnt it be used for heating elements?

  • @PhdHung

    @PhdHung

    4 жыл бұрын

    It is DC voltage

  • @ramdaspokale2400
    @ramdaspokale24005 жыл бұрын

    Are bhi Tum step by step instructions detey rho

  • @ohobbista4184
    @ohobbista41845 жыл бұрын

    Por favor poste o esquema da ponte h dc/ac

  • @PhdHung

    @PhdHung

    5 жыл бұрын

    here kzread.info/dash/bejne/p6qX0MuJYN3bkbQ.html

  • @hindistoryhot09
    @hindistoryhot093 жыл бұрын

    Ise circuit ki under jo transfermer he use banakar dekhaio

  • @mayokundeji4846
    @mayokundeji48464 жыл бұрын

    thanks alot sir. you said it is d.c voltage but u said it can be use to charge laptop, and the power pack uses a.c voltage . how wil i use it to charge

  • @PhdHung

    @PhdHung

    4 жыл бұрын

    If your electrical equipment uses switching power. It can use this circuit, this inverter cannot run fan or iron transformer.

  • @mayokundeji4846

    @mayokundeji4846

    4 жыл бұрын

    @@PhdHung thanks alot

  • @user-rg6vt1mx5n
    @user-rg6vt1mx5n4 жыл бұрын

    i opened atx supply but i not found the component which u showed on video is the circuit will diffrent or will work on same circuit can u tell

  • @PhdHung

    @PhdHung

    4 жыл бұрын

    There are many manufacturers of ATX power supplies. Each manufacturer will have 1 diagram. I need to know the name of the driver IC as well as the picture of the PCB.

  • @user-rg6vt1mx5n

    @user-rg6vt1mx5n

    4 жыл бұрын

    @@PhdHung ic p8224 and cm6800 here are two ic

  • @jaysiyaram
    @jaysiyaram5 жыл бұрын

    यह कन्वर्टर हमको चाहिए जो जो 220 वोल्ट डीसी को 220 बदलता है मेरे पास दूसरा 20 वोल्ट का सोलर है उसी में लगाना है

  • @mohamadux5782
    @mohamadux57823 жыл бұрын

    Can I use IC 7500 or 494 ??? And use MOSFET irf44zn ??

  • @PhdHung

    @PhdHung

    3 жыл бұрын

    yes, ok

  • @justelectronics2471
    @justelectronics24714 жыл бұрын

    Why there are two big capacitors near the transformer whats the purpose

  • @electronicsclime3738
    @electronicsclime37383 жыл бұрын

    atx transformer ko winding karke dikhao uska out put friquency and volt kitna hai?

  • @bomche115
    @bomche1154 жыл бұрын

    helo Việt Nam. Cho em tương tác kênh của anh nha

  • @ogdan1173
    @ogdan11735 жыл бұрын

    Hello. What is Power out? (In Wats)

  • @PhdHung

    @PhdHung

    5 жыл бұрын

    max 300W

  • @robertobrito8487
    @robertobrito84875 жыл бұрын

    hello friend does a tutorial as you create pdf to make the pci

  • @PhdHung

    @PhdHung

    5 жыл бұрын

    I use foxit reader software, it's free. Easily create pdf from eagle 6.5

  • @saileshmishra75
    @saileshmishra755 жыл бұрын

    Plz share the Circuit diagram,,it is needed

  • @PhdHung

    @PhdHung

    5 жыл бұрын

    here Facebook group : bit.ly/CreativeElectronic Download file here: mshare.io/file/ms39zwXL

  • @mirnawatimirna3427
    @mirnawatimirna34274 жыл бұрын

    look and help me ... make a video lesson to rewind the ei33 transformer that has a trunk (elephant transformer) to be installed on this inverter..🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏

  • @ebrihammansy4987
    @ebrihammansy49875 жыл бұрын

    Plase charted circuit

  • @kumatech7556
    @kumatech75562 ай бұрын

    Please why should it not be used for fan?

  • @Sanatan-Prehri-Lucknow
    @Sanatan-Prehri-Lucknow3 жыл бұрын

    You are from which country.... can I buy this from you...

  • @mrcamarium
    @mrcamarium5 жыл бұрын

    non va bene la tensione è in cc a me serve in ac

  • @soheildehghani8633
    @soheildehghani86333 жыл бұрын

    Can i use ee-35 transformer?

  • @PhdHung

    @PhdHung

    3 жыл бұрын

    Yes, ok bro

  • @soheildehghani8633

    @soheildehghani8633

    3 жыл бұрын

    Thank you so much

  • @michaljedrzejek6374
    @michaljedrzejek63743 жыл бұрын

    zrobilem ten układ troche temu, żałuję, że nie dodałem stabilizatora 12v do scalaka, trzeba odseparować układ sterowania od tranzystorów. u mnie jeden mosfet dostał zwarcia i scalaka rozerwało 🤣

  • @PhdHung

    @PhdHung

    3 жыл бұрын

    you can use 12v zener diode :))

  • @michaljedrzejek6374

    @michaljedrzejek6374

    3 жыл бұрын

    @@PhdHung mialem chyba jakiś skok napiecia, następna już będzie na zenerkach :)

  • @lawalmohammed83
    @lawalmohammed8314 күн бұрын

    Please Sir how to convert it to pure sine wave inverter?

  • @zaypangestu
    @zaypangestu5 жыл бұрын

    Sirkit for step one inverter egs002 ok

  • @mdakter8081
    @mdakter80814 жыл бұрын

    Sir complete circuit 300 watt 500wat price batao

  • @jesuseduardoalcantaradiaz5142
    @jesuseduardoalcantaradiaz51423 жыл бұрын

    Saludos qué transistores son

  • @RyanShappa
    @RyanShappa2 жыл бұрын

    Why should you not use for fans?

  • @thientruong8507
    @thientruong85074 жыл бұрын

    Hey bro, are u vietnamese?

  • @PhdHung

    @PhdHung

    4 жыл бұрын

    hi bro

  • @richardnoordhoff4288
    @richardnoordhoff42883 жыл бұрын

    Maybe easier to start with a list for components?

  • @PhdHung

    @PhdHung

    3 жыл бұрын

    Project file in video description

  • @richardnoordhoff4288

    @richardnoordhoff4288

    3 жыл бұрын

    @@PhdHung Sorry and thanks :-)

  • @balalah3902
    @balalah39025 жыл бұрын

    use p60 or p50 mosfit

  • @raghumakwana4078
    @raghumakwana40784 жыл бұрын

    Bro i need diagram please Provide new link

  • @SabbirHossain-vy8es
    @SabbirHossain-vy8es4 жыл бұрын

    3205 not to be hot??

  • @jaysiyaram
    @jaysiyaram5 жыл бұрын

    भाई आपका घर कहां पड़ता है

  • @simirida0801
    @simirida08015 жыл бұрын

    What if I use it with 60watt fan?

  • @PhdHung

    @PhdHung

    5 жыл бұрын

    The fan will be broken

  • @simirida0801

    @simirida0801

    5 жыл бұрын

    So is it stronger than the fan?the or can you pleas explain better

  • @PhdHung

    @PhdHung

    5 жыл бұрын

    no, it is DC 220V

  • @robosciencebygayan4622
    @robosciencebygayan46226 ай бұрын

    I have downloaded your file allready,but Why can't open your file?

  • @macdellsaludario8185
    @macdellsaludario81858 ай бұрын

    sir. how about to modify transformers for +-50 its possible

  • @VasimKhan-fv2wy
    @VasimKhan-fv2wy5 жыл бұрын

    24 vold inbetar kese banana btay

  • @FRANCOSUM
    @FRANCOSUM5 жыл бұрын

    Why it cannot be used for fans

  • @PhdHung

    @PhdHung

    5 жыл бұрын

    because it is a DC voltage

  • @ariessetyawanchannel
    @ariessetyawanchannel2 жыл бұрын

    Bisakah saya order yang udah jadi.Apa ada jual di olshop

  • @utpalhalder2468
    @utpalhalder2468 Жыл бұрын

    Ee33 transformer wending data please... ns or np

  • @lamvotuong1813
    @lamvotuong18135 жыл бұрын

    xin sơ đồ mạch bạn ơi

  • @PhdHung

    @PhdHung

    5 жыл бұрын

    in the video description

  • @mrelectronicslab799
    @mrelectronicslab7995 жыл бұрын

    Give me bro components name please

  • @marcielalves9985
    @marcielalves99854 жыл бұрын

    com licença...costumo falar do Senhor Jesus Cristo e aproveito essa oportunidade....todo aquele que aceita Jesus tem seus pecados perdoados e não entra em condenação, mas passou da morte para a vida...Ele está voltando para nos levar para o seu reino no paraíso de Deus...Ele manda que todos se arrependam e pratiquem a sua palavra...que o Senhor vos abençoe cada vez mais

  • @radiohobby185
    @radiohobby1855 жыл бұрын

    good video Brother..i had assembled this circuit...but AC output only 150V...use other type ATX Transformer..( called elephant trafo, in my country), a new sg3525 ( fake?)...please...help me.to solve this problem..thank you

  • @PhdHung

    @PhdHung

    5 жыл бұрын

    You can rewind the transformer.

  • @mirnawatimirna3427

    @mirnawatimirna3427

    4 жыл бұрын

    @@PhdHung secondary and primary how many turn?

  • @rahuls3158
    @rahuls31583 жыл бұрын

    pcb layout for part 1 ?

  • @abulhassanqadri00
    @abulhassanqadri005 жыл бұрын

    Sir DC to AC circuits diagram share please

  • @PhdHung

    @PhdHung

    5 жыл бұрын

    it's in the next video. pls wait

  • @abulhassanqadri00

    @abulhassanqadri00

    5 жыл бұрын

    Thanks sir

Келесі