Simple fix - garden hose pipe tap connector repair
Every year at least one of Rogers garden hose pipe connectors will need some sort of repair, and this time it it is a leak at the tap (faucet) end of the hose pipe with water squirting out of the connector that joins the hose pipe to the outdoor tap.
Roger removes the connector to quickly assess what is causing the problem, and finds that the end of the hose pipe is split.
The quick fix is to cut back well beyond the split if the rubber hose to where the pipe firm and then carefully push the pipe back over the tub receiver within the connector. Roger demonstrates a slight twist as you push the hose pipe in to make sure that all the grippers that will hold the pipe in position are all in the correct position to ensure the hose pipe end is griped firmly in position.
The connector is then replaced on the tap / faucet connector and when the tap is turned back on to full pressure there is no leak - success!
Пікірлер: 18
Good job
@rogthegardener1
8 күн бұрын
Thank you sir!
Tip. Get a connector with the wider "grippers", and less of them, they seem to work way better and provide a better seal.
@rogthegardener1
8 ай бұрын
Thanks for your comment, enjoy your garden
@rogthegardener1
3 ай бұрын
Do you which manufacturer makes those connectors with ‘wider grippers’ ?
Excellent repair. With the drip coming from the top of the tap, can I suggest you can try to simply tighten the very top nut. It should only need a very small amount of right hand tighten. Do not over tighten otherwise ther tap will become difficult to turn. An adjustable spanner should be perfect for the job
@rogthegardener1
2 жыл бұрын
Thanks Mr Michelo 😀👍
Yes Roger but the 'grippers' do not form part of the water seal. The water seal is made between the inside of the hose and the spigot in the fitting. The function of the 'grippers' is to press the hose tightly onto the spigot and thereby make the seal.
@rogthegardener1
Жыл бұрын
Yep absolutely right, thanks for your input-enjoy your garden … I wonder if we are going to see more hosepipe bans again this year?
i have different problem bigger sixe green hose and branded connectors there is too much slop between the inner pipe and the hose and water just baloon at the end and pull every quick disconnect off i was able to fix a middle connector by swaping supermarker connector with other brand rings but thet fix don't work at the ends where the hose accesories mount and it always fells off
@rogthegardener1
3 ай бұрын
Hi thanks for your comment, I am not quite sure whats happening with your hose, but it sounds like a new hose-pipe might be a better option - feel free to send me a photo or two to rogercrookes@lcsuk.net Thanks!
.. and if the hose end is fine?
If you can't fix this without a video you shouldn't be allowed in the garden with any tools...you are the tool
@rogthegardener1
6 ай бұрын
Many thanks for your encouraging comment 😀
My leak is coming out the tip of my connetor , tried two different ones
@rogthegardener1
3 ай бұрын
Hi, thanks for your comment. if you want to email me a picture of where the leak is we can try to help rogercrookes@lcsuk.net Hope to hear from you Roger
@dubiousplantdiet
3 ай бұрын
@@rogthegardener1 sorted it but thanks for responding
@rogthegardener1
3 ай бұрын
@@dubiousplantdiet great- enjoy your garden!