Why don't you build a MAM at the crash site, throw the hard drive in and deconstruct it again? It will continue researching as long as you have another MAM somewhere (like in your base). After 10 minutes you can repeat that at the next crash site.

@Scalti

3 жыл бұрын

Solid pro tip. Didn’t even think of that.

@Sgt__Hawk

3 жыл бұрын

@@Scalti Glad to contribute to your great content.

@blind1337nedm

3 жыл бұрын

wait what

@FacetsOfSerenity

3 жыл бұрын

@@blind1337nedm Build MAM & Equipment Workshop in the field anywhere when needed instead of going back to base.

@jefferylittleton1005

3 жыл бұрын

@@blind1337nedm the MAM works in the cloud just like the Sink. So you can build one anywhere, put the hard drive in, then deconstruct it without stopping the research because you have a MAM built elsewhere connected to your cloud.

15:20 John Wick has entered the Game.

@CaraDees

3 жыл бұрын

This comment actually made me lmao.

Absolutely love all of your videos. Have used pretty much all of them for inspiration in my current messy factory. Your guides are so much easier to follow than everyone else. Please keep making quality content!

@Scalti

3 жыл бұрын

Glad to hear. It’s what I’m striving for.

RIP Doggo -.-

just found you today... wow wow wow! This guy is a KZread gem! Please keep your love for what you do, I wish you the best! have a great life! and THANK YOU!

Great video, your production quality is outstanding. I'd say you could expand to include video editing and post production to your channel.

@lettuceonthemic3252

3 жыл бұрын

jus watch da video bro

@kinnymane8593

3 жыл бұрын

@@lettuceonthemic3252 just type the actual words like an adult, bro

Your videos have changed my gameplay totally as I now build on the actual node rather than belt raw materials back to a main factory.

As always, wonderful content ! The one and only Scalti ! Keep it up, your fanbase is growing ! Cheers From France !

Super helpful to know ticket requirements scale with tiers. I was just happened to be wondering what happened before I put this video on. Thank you!

@Scalti

3 жыл бұрын

They don’t scale with tiers but the points required go up near exponentially.

been playing this game for awhile, never knew about the quick search. So handy!

Some moments of tension in an otherwise awesome video where I thought you might not spend your last token on the coffee cup!

Another reason to research Hard Drives early is that there are a couple of inventory expansions that only become available when you run out of alt recipes to choose. (Actually, when there are 2 alts left you get a choice of them or an expansion.) (According to the Wiki one of the inventory expansions requires Tier 5) Also, make sure you sink an Awesome Coupon for an extra fun surprise (don't waste the coupons to actually buy the item until you've got everything useful.)

Thanks for the video, have watched it a couple of times. Also until I got them I did realize how nice the stairway and the center column piece were for moving between factory floors without ramps. My first buys in the shop seem to be the double ramps, electrical wall studs, then the conveyor walls.. Thank you again as I thought the Awesome shop items were bought with real money before I watched your video the first time.

Keep up the good work bro. Great videos. You'll be big one day.

That quick search tip is fantastic thank you!

Sure be nice to see how you power all this. Great video outside of that

Interested in some oil or even _bauxite_ setups!

Really glad i found your channel. Also at 15:20 you started to sound like Hank Hill

@Scalti

3 жыл бұрын

Dangit Bobby!

omg that search/calc function TY

Actually, what I've found is there are crash sites that require a higher tier item in order to open it. Like, I opened one yesterday located on the East side of the map that needed some power (67 MW) and 2 Turbo Motors. The Turbo Motor is more or less as high as we go for the moment. It ranks as the highest earner at 456,056 points per item and has the AWESOME sink spitting out coupons like a squirrel on acid. So, it's not so much that the crash site hard drive will only offer items from your current tier, but the game also ensures you must be in a higher tier in order to access a particular hard drive in the first place. Other crash sites demand Crystal Oscillators, AI Limiters or Heavy Modular Frames, which are also higher tier. This attests that the game only wants you to access those sites at their tier levels. In fact, the particular hard drive I mentioned gave me the option to get the alternate turbo motor recipe (Turbo Rigour Motor). This didn't surprise me, considering I had to give it 2 Turbo Motors in the first place.

@bufmouse13

3 жыл бұрын

the harddrives output is random, but some crashsites wont allow you to get their hard drives until later which is why he suggested bringing beacons. but the possible recipes that show up dont have anything to do with where you got the HD they are random based on what is available.

@Hexalobular

Жыл бұрын

But AI limiters, Heavy Modular Frames and I think Crystal Oscillators can be found at crash sites, so they don't strictly limit you, you just have to collect and carry around the high level tech you find at other crash sites. (I thought Turbo motors could be found at crash sites as well but I haven't found any so far this playthrough.)

I'm used to you being so calm and collected, but when that Spitter crashed the party that side of you disappeared

Thanks for the great videos!

That poor doggo, this is possibly the first satisfactory video that ever made me cry. I will say that I'm a little bit conflicted about this alternative recipe for iron plates being better. Sure it's less machines at this step, but almost one and a half times as many screws. That's more machines for making screws, more machines for making iron rods if you don't have an alternative screw recipe, possibly more miners to be able to get the extra or you need, and after all of that you have to have at least Mk 4 belts to even be able to put in screws fast enough to use the machine at full speed

@bloodypeanuts2593

3 жыл бұрын

As a side note to the disagreement here, I don't want to sound like I'm all criticism! Absolutely love your channel and the aesthetic of your factory builds, You've inspired me to take my normally spaghetti-brained factories and take the time to sit and focus on making something aesthetic, and through all of your tutorials giving me great tools to do so. I find your content extremely relaxing to watch and even extremely seasoned satisfactory players will be able to find some neat tips in all of this

@Scalti

3 жыл бұрын

All good! Always appreciate feedback. Makes for good conversation. You’re right if you don’t consider other alt recipes. Steel screws are amazing with the bolted iron plate however and really reduces the space needed. I haven’t delved into full alt recipe systems enough yet to really speak in absolutes but from initial looks it seems like an amazing solution.

@Keschnarf

3 жыл бұрын

@@bloodypeanuts2593 It's only about 40% more screws with the alternate reciepe for the reinforced plates: 60 screws/min for 5 plates/min times 3 to get 15 plates/min equals 180 screws/min with the vanilla receipe versus the 250 screws/min with the alternate reciepe. So in total you can save up to 22 MW of power (2 constuctors = 8MW / 2 assemblers = 30MW). :-)

You can feed an awesome coupon into awesome sink and unlock the cybertruck

Very helpful, I doesn't know that complex piece give more point. I use it only with caterium wire xD

16:40 jaw dropped

Very nice content!

15:00 just murdered his dogo

Never thought of the machine savings and machine capacity......which is huge. Always looked at it as a multiplication factor only. Good instructional video again mate. Poor Doggo

I would love to see a guide on all hard drive locations

@Scalti

4 жыл бұрын

That would be a task! If done correctly, which is the only way to do it, that would be a long video. XD A more efficient approach is to check out the Satisfactory Calculator website to see all of the locations. Much more effective use of everyone’s time.

Even tho this video is about the coupons I now know how to get a doggo xD

I got the cast screws which make screws from iron ingots instead of iron rods which is a god send

The alternate recipe you unlocked for the plates, my assumption is you would need Mk3 conveyor belts to be able to feed 250 screws per minute, right? Unless you manually loaded batches of 500 screws at a time into the assembler, which would be required during early game play.

@Scalti

3 жыл бұрын

Correct. The point isn’t so much to unlock the recipes and use them right away but more so to research HDDs early game to skew the randomness of the three offered alternates in your favor to have them ready. If you waited until you could build MK3 belts to research the drives, your chances of hitting an alt recipe for a specific item (like the reinforced iron plates) goes down because there are more things you’re able to make and more things you can get an alternative recipe for.

@bitharne

2 жыл бұрын

Pro-tip: build two assemblers and crank them to 55% or so then belt two mk2s. It’s actually cheaper on power and you can afford the machines

And that's why I never tame the lizard doggos

rip lizard doggo

Where do you find a list of all the "creative mode" commands for Satisfactory? All I've found was stuff about in-game data from console commands but nothing like !creativepower or what-not.

@Scalti

2 жыл бұрын

PAK utility mod

Divide the material cost by 3. That alternate uses 14 more screws than base cost.

@Stilghar

3 жыл бұрын

It's a recipe, that is supposed to reduce factory's footprint and less energy.

I can zoop the ramp right on up to the top of a cliff but maybe it's because I'm playing a year later

Is it possible to scan hard drive right off the bat when start new game and get fabric alternate recipe? Or i have to reach the milestone first?

@Scalti

2 жыл бұрын

Have to reach it. You need to be able to make an item before you can get an alternate recipe.

Also couldn't you just buy a bunch of crystal oscillators (a 100 crystal osscilators for 3 tickets) and sink them to get more points?

16:02 So what’s the Golden Rule for selecting one of the three listed from the hard drive? I’ve seen so much useful stuff that I probably passed on. I just started playing with 200hrs😂

@Stilghar

3 жыл бұрын

When you see a recipe that allows you to produce screws directly from ingots early game, then take it. :-D You basically have to do some math, to determine which is better than what you currently have, there's no way around it. There's two recipes you want if they show up, because they only exist as alternates. These are Compacted Coal and Turbofuel.

All of these crash sites makes me wonder how many bodies Ficsit throws at a planet until one sticks instead of splatters.

@Scalti

2 жыл бұрын

There are no bodies. These spacecraft are what transport items to the space elevator from the hub. One could imply that we’re not the first on the planet but at the same time, if we’re finding other shipments, why don’t we find existing factories of some kind?

@battyplays404

2 жыл бұрын

@@Scalti I would love to find a heavy modular frame factory. lol

I See a John wick vid of you comin

RIP Doggo

You would need like 5+ extra constructors to make all those extra screws and plates no? Great video tho

@powerpc6037

3 жыл бұрын

I noticed that too. I'd rather build 3 assemblers which in total need only 36 screws instead of one assembler that needs 50 screws to produce the same amount of RIP. In my opinion, that was a bad recipe. Of course, you require less power to run one assembler compared to 3, but instead you need more miners for the extra iron ore, more smelters to get more ingots, more constructors to make iron rods, more constructors to make the screws and more belts. I'd rather have the casted screw recipe, then you can eliminate iron rods in that production line, saving power while needing the exact same amount of ore and ingots and producing the exact same amount of screws. But still, good tutorial for newcomers.

@constantin-adrianprisecari5379

2 жыл бұрын

@@powerpc6037 Good catch, the main carrot is you make plates 3xfaster (with overclocking becomes crazier). it is not easy to feed 50 screws per minute on a newb starting factory, when you already have a mumbo jumbo of things going. But, it saves time for getting plates to unlock everything faster - and build everything on the side. at the same time, the other 2 options he got here were kinda bad, too. low level items that you can already mass produce easy with little power involved and don't have to mix up your ores on the belts.

what world is this?

@Scalti

3 жыл бұрын

How do you mean? It’s all one map.

@emphase6

3 жыл бұрын

@@Scalti oh really? I just got the game two days ago and it asked me to choose 1 of 4 areas to start. I thought they were all different worlds.

@kinnymane8593

3 жыл бұрын

@@emphase6 it’s all one map, you just choose where to start in it

Your calculations are bad 😂